Re: [RFC patch 0/5] genirq: add infrastructure for threaded interrupt handlers
From: Ingo Oeser
Date: Wed Oct 08 2008 - 18:18:52 EST
Hi there,
[CC'ed some distribution specific experts]
On Friday 03 October 2008, you wrote:
> On Wed, Oct 01, 2008 at 08:40:14PM -0400, Jon Masters wrote:
> > On Wed, 2008-10-01 at 23:02 +0000, Thomas Gleixner wrote:
> >
> > > I hope to have a real converted driver (aside of the dummy module used
> > > for testing) ready real soon - as far as bugs/regressions stay out of
> > > my way for a while. :)
> >
> > Sven and I started poking at the various USB host drivers on the flight
> > back from Plumbers. I'll see if I can convert over a few here on the
> > systems that I have and send over some patches.
>
> There's only 3, how hard could it be? :)
Heh! That feature is the only thing, that keeps my crappy combination
of hardware and Ubuntu Hardy together :-)
With the non-RT Ubuntu kernel flavors, it just hangs in that situation.
It looks like this at the moment with a Ubuntu RT-Kernel, in case someone
likes to debug that:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.24-21-rt (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP PREEMPT RT Mon Aug 25 19:24:40 UTC 2008 (Ubuntu 2.6.24-4.6-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e8000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Warning only 4GB will be used.
[ 0.000000] Use a HIGHMEM64G enabled kernel.
[ 0.000000] 3200MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4b40
[ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 1048576
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4040 pages, LIFO batch:0
[ 0.000000] Normal zone: 3080 pages used for memmap
[ 0.000000] Normal zone: 222200 pages, LIFO batch:31
[ 0.000000] HighMem zone: 11200 pages used for memmap
[ 0.000000] HighMem zone: 808000 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6490 checksum 0
[ 0.000000] ACPI: RSDP 000F6490, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT CFFF3000, 0030 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] ACPI: FACP CFFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] ACPI: DSDT CFFF30C0, 4B34 (r1 GBT NVDAACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS CFFF0000, 0040
[ 0.000000] ACPI: MCFG CFFF7C80, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] ACPI: APIC CFFF7C00, 007C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034240
[ 0.000000] Kernel command line: root=/dev/mapper/Ubuntu-root ro noapic quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2211.442 MHz processor.
[ 18.517765] spurious 8259A interrupt: IRQ7.
[ 18.519999] Console: colour VGA+ 80x25
[ 18.520001] console [tty0] enabled
[ 18.520235] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.520537] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.688113] Memory: 3335620k/4194304k available (2225k kernel code, 71024k reserved, 1059k data, 368k init, 2490304k highmem)
[ 18.688120] virtual kernel memory layout:
[ 18.688121] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 18.688122] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.688123] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.688124] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.688125] .init : 0xc043b000 - 0xc0497000 ( 368 kB)
[ 18.688126] .data : 0xc032c6d0 - 0xc0435324 (1059 kB)
[ 18.688127] .text : 0xc0100000 - 0xc032c6d0 (2225 kB)
[ 18.688130] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.748223] Calibrating delay using timer specific routine.. 4424.69 BogoMIPS (lpj=2212348)
[ 18.748260] Security Framework initialized
[ 18.748264] SELinux: Disabled at boot.
[ 18.748270] AppArmor: AppArmor initialized
[ 18.748273] Failure registering capabilities with primary security module.
[ 18.748287] Mount-cache hash table entries: 512
[ 18.748396] Initializing cgroup subsys ns
[ 18.748399] Initializing cgroup subsys cpuacct
[ 18.748408] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[ 18.748416] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.748418] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.748420] CPU 0(2) -> Core 0
[ 18.748422] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000
[ 18.748431] Compat vDSO mapped to ffffe000.
[ 18.748439] Checking 'hlt' instruction... OK.
[ 18.752453] SMP alternatives: switching to UP code
[ 18.753321] Early unpacking initramfs... done
[ 19.066316] ACPI: Core revision 20070126
[ 19.066372] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.068299] ACPI: setting ELCR to 0200 (from 8ca0)
[ 19.069950] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 19.069966] SMP alternatives: switching to SMP code
[ 19.070290] Booting processor 1/1 eip 3000
[ 19.080875] Initializing CPU#1
[ 19.141627] Calibrating delay using timer specific routine.. 4422.03 BogoMIPS (lpj=2211015)
[ 19.141633] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[ 19.141639] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.141641] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.141642] CPU 1(2) -> Core 1
[ 19.141644] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00020410 00002001 00000000 0000001f 00000000
[ 19.141254] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 19.141268] Total of 2 processors activated (8846.72 BogoMIPS).
[ 19.243554] Brought up 2 CPUs
[ 19.243573] CPU0 attaching sched-domain:
[ 19.243576] domain 0: span 03
[ 19.243578] groups: 01 02
[ 19.243581] CPU1 attaching sched-domain:
[ 19.243583] domain 0: span 03
[ 19.243585] groups: 02 01
[ 19.243785] net_namespace: 76 bytes
[ 19.243790] Booting paravirtualized kernel on bare hardware
[ 19.244211] Time: 5:45:17 Date: 10/08/08
[ 19.244244] NET: Registered protocol family 16
[ 19.244421] EISA bus registered
[ 19.244425] ACPI: bus type pci registered
[ 19.248898] PCI: PCI BIOS revision 3.00 entry at 0xfb2a0, last bus=3
[ 19.248900] PCI: Using configuration type 1
[ 19.248903] Setting up standard PCI resources
[ 19.251879] ACPI: EC: Look up EC in DSDT
[ 19.258260] ACPI: Interpreter enabled
[ 19.258265] ACPI: (supports S0 S1 S4 S5)
[ 19.258279] ACPI: Using PIC for interrupt routing
[ 19.265816] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.266397] PCI: Transparent bridge - 0000:00:06.0
[ 19.266644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.266953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 19.314347] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[ 19.314491] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.314634] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.314778] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 *15)
[ 19.314919] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.315068] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.315216] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 19.315361] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.315506] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.315653] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
[ 19.315799] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15)
[ 19.315944] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 19.316096] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.316243] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 *15)
[ 19.316389] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 19.316535] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 19.316681] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 19.316827] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 *15)
[ 19.316973] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
[ 19.317161] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 19.317331] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 19.317501] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 19.317669] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 19.317837] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 19.318005] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 19.318183] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 19.318355] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 19.318526] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 19.318698] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 19.318869] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 19.319041] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 19.319220] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 19.319392] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 19.319564] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 19.319739] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 19.319911] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 19.320089] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 19.320263] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
[ 19.320395] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.320422] pnp: PnP ACPI init
[ 19.320429] ACPI: bus type pnp registered
[ 19.323619] pnp: PnP ACPI: found 10 devices
[ 19.323621] ACPI: ACPI bus type pnp unregistered
[ 19.323624] PnPBIOS: Disabled by ACPI PNP
[ 19.323826] PCI: Using ACPI for IRQ routing
[ 19.323830] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.377034] NET: Registered protocol family 8
[ 19.377036] NET: Registered protocol family 20
[ 19.377111] AppArmor: AppArmor Filesystem Enabled
[ 19.389057] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 19.389060] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 19.389063] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 19.389065] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 19.389067] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 19.389070] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 19.389073] system 00:01: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 19.389079] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 19.389081] system 00:02: ioport range 0x800-0x87f has been reserved
[ 19.389084] system 00:02: ioport range 0x295-0x314 has been reserved
[ 19.389086] system 00:02: ioport range 0x290-0x294 has been reserved
[ 19.389094] system 00:08: iomem range 0xe8000000-0xefffffff could not be reserved
[ 19.389100] system 00:09: iomem range 0xcc000-0xcffff has been reserved
[ 19.389102] system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
[ 19.389105] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
[ 19.389107] system 00:09: iomem range 0xfc000-0xfffff could not be reserved
[ 19.389110] system 00:09: iomem range 0xcfff0000-0xcfffffff could not be reserved
[ 19.389113] system 00:09: iomem range 0xffff0000-0xffffffff could not be reserved
[ 19.389116] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 19.389118] system 00:09: iomem range 0x100000-0xcffeffff could not be reserved
[ 19.389121] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 19.389124] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 19.419494] PCI: Bridge: 0000:00:06.0
[ 19.419496] IO window: 9000-9fff
[ 19.419499] MEM window: f5000000-f6ffffff
[ 19.419501] PREFETCH window: disabled.
[ 19.419504] PCI: Bridge: 0000:02:00.0
[ 19.419505] IO window: disabled.
[ 19.419510] MEM window: f2000000-f4ffffff
[ 19.419513] PREFETCH window: f0000000-f1ffffff
[ 19.419518] PCI: Bridge: 0000:00:0e.0
[ 19.419519] IO window: disabled.
[ 19.419521] MEM window: f2000000-f4ffffff
[ 19.419523] PREFETCH window: f0000000-f1ffffff
[ 19.419531] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 19.419539] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 19.419551] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 19.419577] NET: Registered protocol family 2
[ 19.454990] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.455239] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 19.455855] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 19.456869] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.456874] TCP reno registered
[ 19.468060] checking if image is initramfs... it is
[ 20.080746] Freeing initrd memory: 8382k freed
[ 20.081459] audit: initializing netlink socket (disabled)
[ 20.081471] audit(1223444718.291:1): initialized
[ 20.081613] krcupreemptd setsched 0
[ 20.081614] prio = 98
[ 20.081671] highmem bounce pool size: 64 pages
[ 20.081742] VFS: Disk quotas dquot_6.5.1
[ 20.081763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.081837] io scheduler noop registered
[ 20.081838] io scheduler anticipatory registered
[ 20.081840] io scheduler deadline registered
[ 20.081849] io scheduler cfq registered (default)
[ 20.106797] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 20.106811] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 20.106824] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 20.106836] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 20.106851] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 20.106866] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 20.106879] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 20.106890] Boot video device is 0000:03:00.0
[ 20.106992] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 20.107027] assign_interrupt_mode Found MSI capability
[ 20.107044] Allocate Port Service[0000:00:0e.0:pcie00]
[ 20.107265] isapnp: Scanning for PnP cards...
[ 20.463165] isapnp: No Plug & Play device found
[ 20.490553] Real Time Clock Driver v1.12ac
[ 20.490664] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.491845] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.491906] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 20.491985] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 20.491988] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 20.492106] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.503193] mice: PS/2 mouse device common for all mice
[ 20.503308] EISA: Probing bus 0 at eisa.0
[ 20.503314] Cannot allocate resource for EISA slot 1
[ 20.503330] EISA: Detected 0 cards.
[ 20.503332] cpuidle: using governor ladder
[ 20.503404] NET: Registered protocol family 1
[ 20.503427] Using IPI No-Shortcut mode
[ 20.503456] registered taskstats version 1
[ 20.503560] Magic number: 12:388:769
[ 20.503646] hash matches device ptyp5
[ 20.503660] hash matches device kmsg
[ 20.503666] hash matches device 0000:00:05.0
[ 20.503684] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.503686] EDD information not available.
[ 20.503872] Freeing unused kernel memory: 368k freed
[ 20.525317] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 21.742212] fuse init (API version 7.9)
[ 21.768889] device-mapper: uevent: version 1.0.3
[ 21.768936] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
[ 21.783453] md: linear personality registered for level -1
[ 21.787115] md: multipath personality registered for level -4
[ 21.790905] md: raid0 personality registered for level 0
[ 21.795291] md: raid1 personality registered for level 1
[ 21.799015] xor: measuring software checksum speed
[ 21.803477] 8regs : 2896.000 MB/sec
[ 21.808477] 8regs_prefetch: 2804.000 MB/sec
[ 21.813478] 32regs : 2192.000 MB/sec
[ 21.818479] 32regs_prefetch: 1796.000 MB/sec
[ 21.818481] xor: using function: 8regs (2896.000 MB/sec)
[ 21.819566] async_tx: api initialized (async)
[ 21.839519] raid6: int32x1 824 MB/s
[ 21.856529] raid6: int32x2 871 MB/s
[ 21.873550] raid6: int32x4 835 MB/s
[ 21.890545] raid6: int32x8 609 MB/s
[ 21.907509] raid6: mmxx1 1753 MB/s
[ 21.924501] raid6: mmxx2 3230 MB/s
[ 21.941508] raid6: sse1x1 1757 MB/s
[ 21.958508] raid6: sse1x2 3011 MB/s
[ 21.975510] raid6: sse2x1 2968 MB/s
[ 21.992511] raid6: sse2x2 4074 MB/s
[ 21.992512] raid6: using algorithm sse2x2 (4074 MB/s)
[ 21.992515] md: raid6 personality registered for level 6
[ 21.992517] md: raid5 personality registered for level 5
[ 21.992518] md: raid4 personality registered for level 4
[ 22.018354] md: raid10 personality registered for level 10
[ 22.236163] usbcore: registered new interface driver usbfs
[ 22.236183] usbcore: registered new interface driver hub
[ 22.236259] usbcore: registered new device driver usb
[ 22.247614] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 22.247891] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
[ 22.247894] PCI: setting IRQ 7 as level-triggered
[ 22.247898] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7
[ 22.247907] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 22.247910] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 22.248138] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 22.248186] ohci_hcd 0000:00:02.0: irq 7, io mem 0xf7005000
[ 22.301202] usb usb1: configuration #1 chosen from 1 choice
[ 22.301223] hub 1-0:1.0: USB hub found
[ 22.301233] hub 1-0:1.0: 10 ports detected
[ 22.662617] usb 1-9: new low speed USB device using ohci_hcd and address 2
[ 22.853579] usb 1-9: configuration #1 chosen from 1 choice
[ 22.922573] SCSI subsystem initialized
[ 22.980791] libata version 3.00 loaded.
[ 22.983376] pata_amd 0000:00:04.0: version 0.3.10
[ 22.983423] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 22.983502] scsi0 : pata_amd
[ 22.983546] scsi1 : pata_amd
[ 22.984057] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 22.984060] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 23.288979] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33
[ 23.445904] ata1.00: configured for UDMA/33
[ 23.445937] ata2: port disabled. ignoring.
[ 23.446803] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5
[ 23.740145] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
[ 23.740150] PCI: setting IRQ 11 as level-triggered
[ 23.740153] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11
[ 23.740187] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 23.740196] ACPI: PCI interrupt for device 0000:00:05.0 disabled
[ 23.740397] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 15
[ 23.740399] PCI: setting IRQ 15 as level-triggered
[ 23.740403] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LFID] -> GSI 15 (level, low) -> IRQ 15
[ 23.740417] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 23.740423] ACPI: PCI interrupt for device 0000:00:05.1 disabled
[ 23.740621] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 10
[ 23.740623] PCI: setting IRQ 10 as level-triggered
[ 23.740626] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 10 (level, low) -> IRQ 10
[ 23.740641] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 23.740647] ACPI: PCI interrupt for device 0000:00:05.2 disabled
[ 24.228852] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 24.229104] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 7
[ 24.229107] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 7 (level, low) -> IRQ 7
[ 24.229112] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 24.742086] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:88:c7:bc
[ 24.742091] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 24.741991] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
[ 24.741996] PCI: setting IRQ 5 as level-triggered
[ 24.742000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5
[ 24.742010] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 24.742013] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 24.742044] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 24.742071] ehci_hcd 0000:00:02.1: debug port 1
[ 24.742074] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 24.742487] ehci_hcd 0000:00:02.1: irq 5, io mem 0xf7006000
[ 24.743042] usb 1-9: USB disconnect, address 2
[ 24.747902] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.748097] usb usb2: configuration #1 chosen from 1 choice
[ 24.748118] hub 2-0:1.0: USB hub found
[ 24.748126] hub 2-0:1.0: 10 ports detected
[ 24.849006] sata_nv 0000:00:05.0: version 3.5
[ 24.849018] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11
[ 24.849056] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 24.849682] scsi2 : sata_nv
[ 24.849783] scsi3 : sata_nv
[ 24.849933] ata3: SATA max UDMA/133 cmd 0xa400 ctl 0xa800 bmdma 0xb400 irq 11
[ 24.849936] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xb408 irq 11
[ 25.181614] Driver 'sr' needs updating - please use bus_type methods
[ 25.189497] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 25.189502] Uniform CD-ROM driver Revision: 3.20
[ 25.189552] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 25.203748] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 25.264959] usb 1-9: new low speed USB device using ohci_hcd and address 3
[ 25.332719] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 25.455207] usb 1-9: configuration #1 chosen from 1 choice
[ 25.458200] usbcore: registered new interface driver hiddev
[ 25.467322] input: Logitech Trackball as /devices/pci0000:00/0000:00:02.0/usb1/1-9/1-9:1.0/input/input2
[ 25.478011] input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:02.0-9
[ 25.478026] usbcore: registered new interface driver usbhid
[ 25.478029] /build/buildd/linux-2.6.24/debian/build/custom-source-rt/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 25.543836] ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 25.543843] ata3.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133
[ 25.543845] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 25.580880] ata3.00: configured for UDMA/133
[ 25.883782] ata4: SATA link down (SStatus 0 SControl 300)
[ 25.894907] scsi 2:0:0:0: Direct-Access ATA ST3500630NS 3.AE PQ: 0 ANSI: 5
[ 25.894973] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 25.894521] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LFID] -> GSI 15 (level, low) -> IRQ 15
[ 25.894568] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 25.894608] scsi4 : sata_nv
[ 25.894662] scsi5 : sata_nv
[ 25.894806] ata5: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc800 irq 15
[ 25.894809] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xc808 irq 15
[ 26.197073] ata5: SATA link down (SStatus 0 SControl 300)
[ 26.510116] ata6: SATA link down (SStatus 0 SControl 300)
[ 26.520469] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 10 (level, low) -> IRQ 10
[ 26.520505] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 26.520560] scsi6 : sata_nv
[ 26.520794] scsi7 : sata_nv
[ 26.520936] ata7: SATA max UDMA/133 cmd 0xcc00 ctl 0xd000 bmdma 0xdc00 irq 10
[ 26.520939] ata8: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xdc08 irq 10
[ 26.823157] ata7: SATA link down (SStatus 0 SControl 300)
[ 27.136196] ata8: SATA link down (SStatus 0 SControl 300)
[ 27.149496] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 15
[ 27.149500] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 15 (level, low) -> IRQ 15
[ 27.149507] 3c59x: Donald Becker and others.
[ 27.149511] 0000:01:07.0: 3Com PCI 3c905B Cyclone 100baseTx at f8886000.
[ 27.158757] Driver 'sd' needs updating - please use bus_type methods
[ 27.158833] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 27.158844] sd 2:0:0:0: [sda] Write Protect is off
[ 27.158846] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.158861] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.158901] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 27.158909] sd 2:0:0:0: [sda] Write Protect is off
[ 27.158911] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.158925] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.158928] sda:ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 27.172844] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5
[ 27.172855] 0000:01:08.0: 3Com PCI 3c905B Cyclone 100baseTx at f89b6000.
[ 27.177621] sda1 sda2 < sda5 >
[ 27.185442] sd 2:0:0:0: [sda] Attached SCSI disk
[ 27.700325] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.700371] kjournald starting. Commit interval 5 seconds
[ 34.798310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.909990] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.084447] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 35.084466] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[ 36.006688] udev: renamed network interface eth0 to lan
[ 37.913301] input: Power Button (FF) as /devices/virtual/input/input3
[ 37.930424] ACPI: Power Button (FF) [PWRF]
[ 37.930474] input: Power Button (CM) as /devices/virtual/input/input4
[ 37.949445] ACPI: Power Button (CM) [PWRB]
[ 38.426176] udev: renamed network interface eth2 to dmz
[ 38.435089] udev: renamed network interface eth1 to wan
[ 39.990176] lan: no link during initialization.
[ 40.072308] dmz: setting half-duplex.
[ 40.861083] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
[ 40.861087] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10
[ 40.861102] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 41.313471] NET: Registered protocol family 10
[ 41.313839] lo: Disabled Privacy Extensions
[ 41.314395] ADDRCONF(NETDEV_UP): lan: link is not ready
[ 41.314915] ADDRCONF(NETDEV_UP): dmz: link is not ready
[ 41.504445] lp: driver loaded but no devices found
[ 41.699128] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
[ 41.699133] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
[ 41.699138] matroxfb: Matrox G550 detected
[ 41.700140] PInS memtype = 5
[ 41.700355] matroxfb: MTRR's turned on
[ 41.700375] matroxfb: 640x480x8bpp (virtual: 640x26214)
[ 41.700377] matroxfb: framebuffer at 0xF0000000, mapped to 0xf8c00000, size 33554432
[ 41.700433] fb0: MATROX frame buffer device
[ 41.700434] fb0: initializing hardware
[ 42.307283] EXT3 FS on dm-0, internal journal
[ 43.208393] kjournald starting. Commit interval 5 seconds
[ 43.217060] EXT3 FS on sda1, internal journal
[ 43.217067] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.286046] Adding 10108920k swap on /dev/mapper/Ubuntu-swap_1. Priority:-1 extents:1 across:10108920k
[ 43.491686] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 43.582127] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 43.643560] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 43.903238] wan: setting half-duplex.
[ 43.904752] ADDRCONF(NETDEV_UP): wan: link is not ready
[ 44.138697] PPP generic driver version 2.4.2
[ 44.164043] NET: Registered protocol family 17
[ 44.889602] No dock devices found.
[ 45.332851] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 45.332360] powernow-k8: MP systems not supported by PSB BIOS structure
[ 45.333080] powernow-k8: MP systems not supported by PSB BIOS structure
[ 48.448693] Linux agpgart interface v0.102
[ 48.483364] [drm] Initialized drm 1.1.0 20060810
[ 48.626623] [drm] Initialized mga 3.2.1 20051102 on minor 0
[ 50.264062] ppdev: user-space parallel port driver
[ 55.001104] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 55.001111] apm: disabled - APM is not SMP safe.
[ 65.381474] Bluetooth: Core ver 2.11
[ 65.381855] NET: Registered protocol family 31
[ 65.381859] Bluetooth: HCI device and connection manager initialized
[ 65.381863] Bluetooth: HCI socket layer initialized
[ 65.411817] Bluetooth: L2CAP ver 2.9
[ 65.411822] Bluetooth: L2CAP socket layer initialized
[ 65.469713] Bluetooth: RFCOMM socket layer initialized
[ 65.469726] Bluetooth: RFCOMM TTY layer initialized
[ 65.469728] Bluetooth: RFCOMM ver 1.8
[ 940.928916] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 940.928922] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1
[ 940.928943] [<c016b924>] __report_bad_irq+0x24/0x80
[ 940.928956] [<c016bbfb>] note_interrupt+0x27b/0x2a0
[ 940.928959] [<c016a8dc>] handle_IRQ_event+0x5c/0x100
[ 940.928974] [<c016af3c>] thread_simple_irq+0x6c/0x90
[ 940.928983] [<c016b869>] do_irqd+0x229/0x290
[ 940.928998] [<c016b640>] do_irqd+0x0/0x290
[ 940.929002] [<c0141ea2>] kthread+0x42/0x70
[ 940.929005] [<c0141e60>] kthread+0x0/0x70
[ 940.929011] [<c0105847>] kernel_thread_helper+0x7/0x10
[ 940.929022] =======================
[ 940.929023] handlers:
[ 940.929024] [<f891ac70>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 940.929043] turning off IO-APIC fast mode.
[ 1007.970826] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 1007.970832] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1
[ 1007.970852] [<c016b924>] __report_bad_irq+0x24/0x80
[ 1007.970864] [<c016bbfb>] note_interrupt+0x27b/0x2a0
[ 1007.970868] [<c016a8dc>] handle_IRQ_event+0x5c/0x100
[ 1007.970883] [<c016af3c>] thread_simple_irq+0x6c/0x90
[ 1007.970892] [<c016b869>] do_irqd+0x229/0x290
[ 1007.970907] [<c016b640>] do_irqd+0x0/0x290
[ 1007.970911] [<c0141ea2>] kthread+0x42/0x70
[ 1007.970914] [<c0141e60>] kthread+0x0/0x70
[ 1007.970920] [<c0105847>] kernel_thread_helper+0x7/0x10
[ 1007.970931] =======================
[ 1007.970932] handlers:
[ 1007.970933] [<f891ac70>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 5970.101996] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 5970.102003] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1
[ 5970.102022] [<c016b924>] __report_bad_irq+0x24/0x80
[ 5970.102034] [<c016bbfb>] note_interrupt+0x27b/0x2a0
[ 5970.102038] [<c016a8dc>] handle_IRQ_event+0x5c/0x100
[ 5970.102053] [<c016af3c>] thread_simple_irq+0x6c/0x90
[ 5970.102063] [<c016b869>] do_irqd+0x229/0x290
[ 5970.102078] [<c016b640>] do_irqd+0x0/0x290
[ 5970.102082] [<c0141ea2>] kthread+0x42/0x70
[ 5970.102085] [<c0141e60>] kthread+0x0/0x70
[ 5970.102091] [<c0105847>] kernel_thread_helper+0x7/0x10
[ 5970.102102] =======================
[ 5970.102103] handlers:
[ 5970.102105] [<f891ac70>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 7633.252211] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 7633.252218] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1
[ 7633.252237] [<c016b924>] __report_bad_irq+0x24/0x80
[ 7633.252249] [<c016bbfb>] note_interrupt+0x27b/0x2a0
[ 7633.252253] [<c016a8dc>] handle_IRQ_event+0x5c/0x100
[ 7633.252268] [<c016af3c>] thread_simple_irq+0x6c/0x90
[ 7633.252278] [<c016b869>] do_irqd+0x229/0x290
[ 7633.252292] [<c016b640>] do_irqd+0x0/0x290
[ 7633.252297] [<c0141ea2>] kthread+0x42/0x70
[ 7633.252300] [<c0141e60>] kthread+0x0/0x70
[ 7633.252306] [<c0105847>] kernel_thread_helper+0x7/0x10
[ 7633.252317] =======================
[ 7633.252318] handlers:
[ 7633.252319] [<f891ac70>] (usb_hcd_irq+0x0/0x60 [usbcore])
[56238.249373] wan: setting full-duplex.
[56238.250332] ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[56249.237072] wan: no IPv6 routers present
[56352.342443] NET: Registered protocol family 24
[58562.155510] irq 7: nobody cared (try booting with the "irqpoll" option)
[58562.155516] Pid: 1606, comm: IRQ-7 Not tainted 2.6.24-21-rt #1
[58562.155537] [<c016b924>] __report_bad_irq+0x24/0x80
[58562.155550] [<c016bbfb>] note_interrupt+0x27b/0x2a0
[58562.155554] [<c016a8dc>] handle_IRQ_event+0x5c/0x100
[58562.155569] [<c016af3c>] thread_simple_irq+0x6c/0x90
[58562.155579] [<c016b869>] do_irqd+0x229/0x290
[58562.155594] [<c016b640>] do_irqd+0x0/0x290
[58562.155599] [<c0141ea2>] kthread+0x42/0x70
[58562.155602] [<c0141e60>] kthread+0x0/0x70
[58562.155608] [<c0105847>] kernel_thread_helper+0x7/0x10
[58562.155620] =======================
[58562.155622] handlers:
[58562.155623] [<f891ac70>] (usb_hcd_irq+0x0/0x60 [usbcore])
CPU0 CPU1
0: 556 1 XT-PIC-XT timer
1: 5841 888 XT-PIC-XT i8042
2: 0 0 XT-PIC-XT cascade
5: 1 1 XT-PIC-XT ehci_hcd:usb2, dmz
7: 160816 1687071 XT-PIC-XT ohci_hcd:usb1
8: 2 1 XT-PIC-XT rtc
9: 0 0 XT-PIC-XT acpi
10: 383980 11338 XT-PIC-XT sata_nv, HDA Intel
11: 669673 57055 XT-PIC-XT sata_nv
14: 584674 64101 XT-PIC-XT libata
15: 42236 15407 XT-PIC-XT libata, sata_nv, wan
222: 5929886 3346 PCI-MSI-edge lan
NMI: 0 0 Non-maskable interrupts
LOC: 59209279 59195939 Local timer interrupts
RES: 4365453 8967863 Rescheduling interrupts
CAL: 70549 64347 function call interrupts
TLB: 12860 12054 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 14677
MIS: 0
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
Subsystem: Giga-byte Technology Unknown device 5001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] #00 [fee0]
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
Subsystem: Giga-byte Technology Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
Subsystem: Giga-byte Technology Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 15
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c80 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
Subsystem: Giga-byte Technology Unknown device 0c11
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f7005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 5
Region 0: Memory at f7006000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device f458:5002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a400 [size=8]
Region 1: I/O ports at a800 [size=4]
Region 2: I/O ports at ac00 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at f700a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 15
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at c000 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at f700b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at d400 [size=8]
Region 3: I/O ports at d800 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at f7004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f5000000-f6ffffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device 0000
Capabilities: [8c] HyperTransport: MSI Mapping
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
Subsystem: Giga-byte Technology Unknown device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
Subsystem: Giga-byte Technology Unknown device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 222
Region 0: Memory at f7007000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e400 [size=8]
Region 2: Memory at f7008000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at f7009000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0100c Data: 4141
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f2000000-f4ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4139
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
01:07.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 9000 [size=128]
Region 1: Memory at f6000000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at f5000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 9400 [size=128]
Region 1: Memory at f6001000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at f5020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f2000000-f4ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Matrox Graphics, Inc. Unknown device 6666
Capabilities: [90] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 512 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <4us, L1 <64us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <16us
Link: ASPM Disabled CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA controller])
Subsystem: Matrox Graphics, Inc. Unknown device 22c0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at f3000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at f2020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=<none>
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.24-21-rt ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:02.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 003: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc404 TrackMan Wheel
bcdDevice 2.20
iManufacturer 1 Logitech
iProduct 2 Trackball
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 103
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.24-21-rt ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 10
wHubCharacteristic 0x0002
No power switching (usb 1.0)
Ganged overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0303 lowspeed power enable connect
Port 10: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
stepping : 2
cpu MHz : 2211.442
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy ts fid vid ttp tm stc
bogomips : 4424.69
clflush size : 64
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
stepping : 2
cpu MHz : 2211.442
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy ts fid vid ttp tm stc
bogomips : 4422.03
clflush size : 64
Booting without "noapic" panics while booting. I wish I could debug that
further and keep initrd stuff working at the same time...
Best Regards
Ingo Oeser
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/