usb device not showing up
From: Norbert Preining
Date: Mon Nov 03 2008 - 11:22:50 EST
Hi all,
(please Cc)
I have the following problem with a disappearing or better not appearing
device: My Sony Vaio VGN-Z11 laptop contains a HSDPA modem:
USB: Bus 004 Device 002: ID 0af0:6911 Option
which is very nicely supported by the hso kernel module (when using the
latest hso patches for the BUG).
Interestingly this device does disappear if I cold boot into linux.
So:
- First booting Vista, then RE-booting (not turning it off in the
meantime) into linux gives me that device and everything works.
- Cold-booting into Linux and the device does not show up.
There were some suggestions I found on the internet that I should echo 1
to /sys/devices/platform/sony-acpi/wwanpower, which I could do and the
value could be read from it again, but it didn't make the USB device
show up.
Is there any way to activate this device other than always going into
Vista first?
Is there a way to save some settings of this device after a reboot (so
in a functional state) and restoring that later on?
I am currently running 2.6.28-rc3 with Mattia Dongili's latest sony-acpi
patches sent to the acpi ML, but had the same problems with -rc2 and
2.6.27, without additional patches.
Please let me know if I can provide further information, I will also
happily hack my kernel to get this device working out of the box.
Thanks a lot and all the best
Norbert
-------------------------------------------------------------------------------
Dr. Norbert Preining <preining@xxxxxxxx> Vienna University of Technology
Debian Developer <preining@xxxxxxxxxx> Debian TeX Group
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
WETWANG (n.)
A moist penis.
--- Douglas Adams, The Meaning of Liff
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/