[PATCH 1/3] documentation: update header file paths
From: Randy Dunlap
Date: Tue Nov 04 2008 - 17:49:48 EST
From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Update several Documentation/ files and a few sub-dir files (only one change
in each) to reflect changed header files locations.
Signed-off-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
---
Documentation/DMA-mapping.txt | 2 +-
Documentation/ioctl-number.txt | 8 ++++----
Documentation/kernel-parameters.txt | 4 ++--
Documentation/magic-number.txt | 6 +++---
Documentation/mips/AU1xxx_IDE.README | 2 +-
Documentation/powerpc/cpu_features.txt | 2 +-
Documentation/x86/zero-page.txt | 2 +-
7 files changed, 13 insertions(+), 13 deletions(-)
--- lin2628-rc3.orig/Documentation/DMA-mapping.txt
+++ lin2628-rc3/Documentation/DMA-mapping.txt
@@ -26,7 +26,7 @@ mapped only for the time they are actual
transfer.
The following API will work of course even on platforms where no such
-hardware exists, see e.g. include/asm-i386/pci.h for how it is implemented on
+hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
top of the virt_to_bus interface.
First of all, you should make sure
--- lin2628-rc3.orig/Documentation/kernel-parameters.txt
+++ lin2628-rc3/Documentation/kernel-parameters.txt
@@ -480,8 +480,8 @@ and is between 256 and 4096 characters.
clearcpuid=BITNUM [X86]
Disable CPUID feature X for the kernel. See
- include/asm-x86/cpufeature.h for the valid bit numbers.
- Note the Linux specific bits are not necessarily
+ arch/x86/include/asm/cpufeature.h for the valid bit
+ numbers. Note the Linux specific bits are not necessarily
stable over kernel options, but the vendor specific
ones should be.
Also note that user programs calling CPUID directly
--- lin2628-rc3.orig/Documentation/magic-number.txt
+++ lin2628-rc3/Documentation/magic-number.txt
@@ -125,14 +125,14 @@ TRIDENT_CARD_MAGIC 0x5072696E triden
ROUTER_MAGIC 0x524d4157 wan_device include/linux/wanrouter.h
SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h
SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c
-GDA_MAGIC 0x58464552 gda include/asm-mips64/sn/gda.h
+GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h
RED_MAGIC1 0x5a2cf071 (any) mm/slab.c
STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h
EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c
HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h
EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h
PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h
-KV_MAGIC 0x5f4b565f kernel_vars_s include/asm-mips64/sn/klkernvars.h
+KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h
I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c
TRIDENT_STATE_MAGIC 0x63657373 trient_state sound/oss/trident.c
M3_CARD_MAGIC 0x646e6f50 m3_card sound/oss/maestro3.c
@@ -158,7 +158,7 @@ CCB_MAGIC 0xf2691ad2 ccb
QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c
QUEUE_MAGIC_USED 0xf7e1cc33 queue_entry drivers/scsi/arm/queue.c
HTB_CMAGIC 0xFEFAFEF1 htb_class net/sched/sch_htb.c
-NMI_MAGIC 0x48414d4d455201 nmi_s include/asm-mips64/sn/nmi.h
+NMI_MAGIC 0x48414d4d455201 nmi_s arch/mips/include/asm/sn/nmi.h
Note that there are also defined special per-driver magic numbers in sound
memory management. See include/sound/sndmagic.h for complete list of them. Many
--- lin2628-rc3.orig/Documentation/powerpc/cpu_features.txt
+++ lin2628-rc3/Documentation/powerpc/cpu_features.txt
@@ -31,7 +31,7 @@ anyways).
After detecting the processor type, the kernel patches out sections of code
that shouldn't be used by writing nop's over it. Using cpufeatures requires
-just 2 macros (found in include/asm-ppc/cputable.h), as seen in head.S
+just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
transfer_to_handler:
#ifdef CONFIG_ALTIVEC
--- lin2628-rc3.orig/Documentation/x86/zero-page.txt
+++ lin2628-rc3/Documentation/x86/zero-page.txt
@@ -3,7 +3,7 @@ protocol of kernel. These should be fill
real-mode setup code of the kernel. References/settings to it mainly
are in:
- include/asm-x86/bootparam.h
+ arch/x86/include/asm/bootparam.h
Offset Proto Name Meaning
--- lin2628-rc3.orig/Documentation/mips/AU1xxx_IDE.README
+++ lin2628-rc3/Documentation/mips/AU1xxx_IDE.README
@@ -44,7 +44,7 @@ FILES, CONFIGS AND COMPATABILITY
Two files are introduced:
- a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+ a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
containes : struct _auide_hwif
timing parameters for PIO mode 0/1/2/3/4
timing parameters for MWDMA 0/1/2
--- lin2628-rc3.orig/Documentation/ioctl-number.txt
+++ lin2628-rc3/Documentation/ioctl-number.txt
@@ -84,7 +84,7 @@ Code Seq# Include File Comments
'B' C0-FF advanced bbus
<mailto:maassen@xxxxxxxxxxxxxxx>
'C' all linux/soundcard.h
-'D' all asm-s390/dasd.h
+'D' all arch/s390/include/asm/dasd.h
'E' all linux/input.h
'F' all linux/fb.h
'H' all linux/hiddev.h
@@ -104,7 +104,7 @@ Code Seq# Include File Comments
'S' 80-81 scsi/scsi_ioctl.h conflict!
'S' 82-FF scsi/scsi.h conflict!
'T' all linux/soundcard.h conflict!
-'T' all asm-i386/ioctls.h conflict!
+'T' all arch/x86/include/asm/ioctls.h conflict!
'U' 00-EF linux/drivers/usb/usb.h
'V' all linux/vt.h
'W' 00-1F linux/watchdog.h conflict!
@@ -119,7 +119,7 @@ Code Seq# Include File Comments
<mailto:natalia@xxxxxxxxxxxxxxxxx>
'c' 00-7F linux/comstats.h conflict!
'c' 00-7F linux/coda.h conflict!
-'c' 80-9F asm-s390/chsc.h
+'c' 80-9F arch/s390/include/asm/chsc.h
'd' 00-FF linux/char/drm/drm/h conflict!
'd' 00-DF linux/video_decoder.h conflict!
'd' F0-FF linux/digi1.h
@@ -166,7 +166,7 @@ Code Seq# Include File Comments
<mailto:oe@xxxxxxx>
0x80 00-1F linux/fb.h
0x81 00-1F linux/videotext.h
-0x89 00-06 asm-i386/sockios.h
+0x89 00-06 arch/x86/include/asm/sockios.h
0x89 0B-DF linux/sockios.h
0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range
0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/