[STAGING] slicoss - use request_firmware
From: Lior Dotan
Date: Wed Nov 05 2008 - 09:02:35 EST
This should make the driver use request_firmware() instead of a static
firmware.
Some obvious things are missing:
1) The unneeded header files are not removed yet. This is to keep the
patch size small.
2) The .bin files are missing so the driver doesn't have what to load.
3) Testing. None of this was tested. It does compiles OK though :)
Signed-off-by: Lior Dotan <liodot@xxxxxxxxx>
diff -up -X a/Documentation/dontdiff b/drivers/staging/slicoss/slic.h a/drivers/staging/slicoss/slic.h
--- b/drivers/staging/slicoss/slic.h 2008-11-04 11:53:12.798139149 +0200
+++ a/drivers/staging/slicoss/slic.h 2008-11-05 15:20:48.497808311 +0200
@@ -41,6 +41,40 @@
#ifndef __SLIC_DRIVER_H__
#define __SLIC_DRIVER_H__
+/* firmware stuff */
+#define OASIS_UCODE_VERS_STRING "1.2"
+#define OASIS_UCODE_VERS_DATE "2006/03/27 15:10:37"
+#define OASIS_UCODE_HOSTIF_ID 3
+
+static s32 ONumSections = 0x2;
+static u32 OSectionSize[] = {
+ 0x00004000, 0x00010000,
+};
+
+static u32 OSectionStart[] = {
+ 0x00000000, 0x00008000,
+};
+
+#define MOJAVE_UCODE_VERS_STRING "1.2"
+#define MOJAVE_UCODE_VERS_DATE "2006/03/27 15:12:22"
+#define MOJAVE_UCODE_HOSTIF_ID 3
+
+static s32 MNumSections = 0x2;
+static u32 MSectionSize[] =
+{
+ 0x00008000, 0x00010000,
+};
+
+static u32 MSectionStart[] =
+{
+ 0x00000000, 0x00008000,
+};
+
+#define GB_RCVUCODE_VERS_STRING "1.2"
+#define GB_RCVUCODE_VERS_DATE "2006/03/27 15:12:15"
+static u32 OasisRcvUCodeLen = 512;
+static u32 GBRcvUCodeLen = 512;
+#define SECTION_SIZE 65536
struct slic_spinlock {
spinlock_t lock;
diff -up -X a/Documentation/dontdiff b/drivers/staging/slicoss/slicoss.c a/drivers/staging/slicoss/slicoss.c
--- b/drivers/staging/slicoss/slicoss.c 2008-11-05 15:48:03.377817712 +0200
+++ a/drivers/staging/slicoss/slicoss.c 2008-11-05 15:54:06.097811733 +0200
@@ -94,6 +94,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/firmware.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/mii.h>
@@ -105,15 +106,6 @@
#include <linux/uaccess.h>
#include "slicinc.h"
-#include "gbdownload.h"
-#include "gbrcvucode.h"
-#include "oasisrcvucode.h"
-
-#ifdef DEBUG_MICROCODE
-#include "oasisdbgdownload.h"
-#else
-#include "oasisdownload.h"
-#endif
#if SLIC_DUMP_ENABLED
#include "slicdump.h"
@@ -2187,6 +2179,9 @@ static void slic_card_cleanup(struct sli
static int slic_card_download_gbrcv(struct adapter *adapter)
{
+ const struct firmware *fw;
+ const char *file = "";
+ int ret;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 codeaddr;
unsigned char *instruction = NULL;
@@ -2194,12 +2189,32 @@ static int slic_card_download_gbrcv(stru
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
- instruction = (unsigned char *)&OasisRcvUCode[0];
- rcvucodelen = OasisRcvUCodeLen;
+ file = "oasis_rcv.bin";
break;
case SLIC_1GB_DEVICE_ID:
- instruction = (unsigned char *)&GBRcvUCode[0];
- rcvucodelen = GBRcvUCodeLen;
+ file = "gb_rcv.bin";
+ break;
+ default:
+ ASSERT(0);
+ break;
+ }
+
+ ret = request_firmware(&fw, file, &adapter->pcidev->dev);
+ if (ret) {
+ printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
+ return ret;
+ }
+
+ instruction = (unsigned char *)fw->data;
+ rcvucodelen = fw->size;
+ switch (adapter->devid) {
+ case SLIC_2GB_DEVICE_ID:
+ if (rcvucodelen != OasisRcvUCodeLen)
+ return -EINVAL;
+ break;
+ case SLIC_1GB_DEVICE_ID:
+ if (rcvucodelen != GBRcvUCodeLen)
+ return -EINVAL;
break;
default:
ASSERT(0);
@@ -2226,13 +2241,16 @@ static int slic_card_download_gbrcv(stru
}
/* download finished */
+ release_firmware(fw);
WRITE_REG(slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
-
return 0;
}
static int slic_card_download(struct adapter *adapter)
{
+ const struct firmware *fw;
+ const char *file = "";
+ int ret;
u32 section;
int thissectionsize;
int codeaddr;
@@ -2256,6 +2274,7 @@ static int slic_card_download(struct ada
case SLIC_2GB_DEVICE_ID:
/* DBG_MSG ("slicoss: %s devid==SLIC_2GB_DEVICE_ID sections[%x]\n",
__func__, (uint) ONumSections); */
+ file = "slic_oasis.bin";
numsects = ONumSections;
for (i = 0; i < numsects; i++) {
sectsize[i] = OSectionSize[i];
@@ -2265,6 +2284,7 @@ static int slic_card_download(struct ada
case SLIC_1GB_DEVICE_ID:
/* DBG_MSG ("slicoss: %s devid==SLIC_1GB_DEVICE_ID sections[%x]\n",
__func__, (uint) MNumSections); */
+ file = "slic_mojave.bin";
numsects = MNumSections;
for (i = 0; i < numsects; i++) {
sectsize[i] = MSectionSize[i];
@@ -2275,26 +2295,33 @@ static int slic_card_download(struct ada
ASSERT(0);
break;
}
+ ret = request_firmware(&fw, file, &adapter->pcidev->dev);
+ if (ret) {
+ printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
+ return ret;
+ }
ASSERT(numsects <= 3);
for (section = 0; section < numsects; section++) {
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *) &OasisUCode[section][0];
+ instruction = (u32 *)(fw->data + (SECTION_SIZE *
+ section));
baseaddress = sectstart[section];
thissectionsize = sectsize[section] >> 3;
lastinstruct =
- (u32 *) &OasisUCode[section][sectsize[section] -
- 8];
+ (u32 *)(fw->data + (SECTION_SIZE * section) +
+ sectsize[section] - 8);
break;
case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *) &MojaveUCode[section][0];
+ instruction = (u32 *)(fw->data + (SECTION_SIZE *
+ section));
baseaddress = sectstart[section];
thissectionsize = sectsize[section] >> 3;
lastinstruct =
- (u32 *) &MojaveUCode[section][sectsize[section]
- - 8];
+ (u32 *)(fw->data + (SECTION_SIZE * section) +
+ sectsize[section] - 8);
break;
default:
ASSERT(0);
@@ -2330,10 +2357,12 @@ static int slic_card_download(struct ada
for (section = 0; section < numsects; section++) {
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *)&OasisUCode[section][0];
+ instruction = (u32 *)fw->data + (SECTION_SIZE *
+ section);
break;
case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *)&MojaveUCode[section][0];
+ instruction = (u32 *)fw->data + (SECTION_SIZE *
+ section);
break;
default:
ASSERT(0);
@@ -2375,13 +2404,13 @@ static int slic_card_download(struct ada
thissectionsize[%x] failure[%x]\n",
__func__, codeaddr, thissectionsize,
failure);
-
+ release_firmware(fw);
return -EIO;
}
}
}
/* DBG_MSG ("slicoss: Compare done\n");*/
-
+ release_firmware(fw);
/* Everything OK, kick off the card */
mdelay(10);
WRITE_REG(slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);