Re: [RFC patch 08/18] cnt32_to_63 should use smp_rmb()

[Nicolas Pitre]

On Fri, 7 Nov 2008, Mathieu Desnoyers wrote:

> I want to make sure
> 
>   __m_cnt_hi
>  is read before
>   mmio cnt_lo read
> 
> for the detailed reasons explained in my previous discussion with
> Nicolas here :
> http://lkml.org/lkml/2008/10/21/1
> 
> I use smp_rmb() to do this on SMP systems (hrm, actually, a rmb() could
> be required so it works also on UP systems safely wrt interrupts).
> 
> The write side is between the hardware counter, which is assumed to
> increment monotonically between each read, and the value __m_cnt_hi
> updated by the CPU. I don't see where we could put a wmb() there.
> 
> Without barrier, the smp race looks as follow :
> 
> 
> CPU    A                                    B
>                                             read hw cnt low (0xFFFFFFFA)
>        read __m_cnt_hi (0x80000000)
>        read hw cnt low (0x00000001)
>        (wrap detected :
>         (s32)(0x80000000 ^ 0x1) < 0)
>        write __m_cnt_hi = 0x00000001
>                                             read __m_cnt_hi (0x00000001)
>        return 0x0000000100000001
>                                             (wrap detected :
>                                              (s32)(0x00000001 ^ 0xFFFFFFFA) < 0)
>                                             write __m_cnt_hi = 0x80000001
>                                             return 0x80000001FFFFFFFA
>                                                                   (time jumps)

Could you have hardware doing such things?  You would get a non cached 
and more expensive read on CPU B which is not in program order with the 
read that should have happened before, and before that second out of 
order read could be performed, you'd have a full sequence in program 
order performed on CPU A.


Nicolas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/