Re: request to revert libata-convert-to-block-tagging patches

[Jeff Garzik]

Tejun Heo wrote:
> Hello, all.
>
> I went through libata-convert-to-block-tagging today and found several
> issues.
>
> 1. libata internal data structure for command context (qc) allocation is
> bound to tag allocation, which means that block layer tagging should be
> enabled for all controllers which have can_queue > 1.
>
> 2. blk-tag offsets allocation for non-sync requests.  I'm not confident
> this is safe.  Till now, if there was only single command in flight for
> the port, it was guaranteed that the qc gets tag zero whether the device
> is NCQ capable or not.  qc allocation is tied tightly with hardware
> command slot allocation and I don't think it's wise to change this
> assumption.
>
> #1 is easy to fix but #2 requires either adding a spinlock or two atomic
> variables to struct blk_queue_tag to keep the current behavior while
> guaranteeing that tags are used in order.  Also, there's delay between
> libata marks a request complete and the request actually gets completed
> and the tag is freed.  If another request gets issued inbetween, the tag
> number can't be guaranteed.  This can be worked around by re-mapping tag
> number in libata depending on command type but, well then, it's worse
> than the original implementation.
>
> So, please revert the following commits.
>
> 43a49cbdf31e812c0d8f553d433b09b421f5d52c
> e013e13bf605b9e6b702adffbe2853cfc60e7806
> 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e

A bit late, since they're already in, but, ACK.  (I'm on East Coast 
Vampire time, apparently)

Now that this is resolved, please allow me a bit of grumbling.  I always 
thought the original course -- 2.6.29 -- was best for these patches.  I 
had even queued them for 2.6.29, when they found their way into 2.6.28 
anyway.  Without /any/ testing by libata maintainers or linux-next. 
Without even being tested on non-NCQ setups, apparently.

The process broke down completely with this patchset :(

I still want to see this stuff in 2.6.29 though; it is the right way to 
go: following the theme of using block rather than SCSI bits in libata 
generic code [when those bits are, themselves, generic rather than 
SCSI-specific].

	Jeff



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/