Re: 2.6.27.7 built for Geode: Clock drift

[john stultz]

On Sat, 2008-12-06 at 07:09 +0100, Harald Dunkel wrote:
> john stultz wrote:
> > 
> > For both configs, can you run:
> >    cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > and:
> >    cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> > 
> > Then send back the output?
> > 
> 
> Sure. For 486:
> 
> % cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> pit jiffies
> % cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> pit
> 
> 
> For Geode (clock is running too fast):
> % cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> jiffies
> % cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> jiffies
> 
> 
> dmesg says for Geode:
> 
> :
> TSC: Unable to calibrate against PIT
> TSC: No reference (HPET/PMTIMER) available
> Marking TSC unstable due to could not calculate TSC khz

Could you send your .config?

It seems the PIT (which is used in 486 build) is being disabled in the
Geode config. However, I thought the Geode's had their own clocksources,
either the SCx200 or the GEODE_MFGPT_TIMER. Maybe one of those needs to
be enabled?

thanks
-john


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/