Re: [PATCH] ASPM: Use msleep instead of cpu_relax during link retraining

[Matthew Wilcox]

On Thu, Dec 25, 2008 at 08:01:29PM +0100, Pavel Machek wrote:
> On Mon 2008-12-22 15:11:57, Andrew Patterson wrote:
> > ASPM: Use msleep instead of cpu_relax during link retraining
> > 
> > The cpu_relax() function can be a noop on certain architectures
> > like IA-64 when CPU threads are disabled, so use msleep instead
> > during link retraining busy/wait loop.
> 
> Author clearly wanted to do a busy loop... why do you think 10msec
> delay here is acceptable?

10ms?  I see a 1ms sleep.

> > @@ -217,16 +220,18 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
> >  	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
> >  
> >  	/* Wait for link training end */
> > -	/* break out after waiting for 1 second */
> > +	/* break out after waiting for timeout */
> >  	start_jiffies = jiffies;
> > -	while ((jiffies - start_jiffies) < HZ) {
> > +	for (;;) {
> >  		pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
> >  		if (!(reg16 & PCI_EXP_LNKSTA_LT))
> >  			break;
> > -		cpu_relax();
> > +		if ((jiffies - start_jiffies) >= LINK_RETRAIN_TIMEOUT)
> > +			break;
> > +		msleep(1);
> 
> Is this safe w.r.t. jiffie wraparounds?

Definitely needs to be time_before/time_after.

> >  	}
> >  	/* training failed -> recover */
> > -	if ((jiffies - start_jiffies) >= HZ) {
> > +	if ((jiffies - start_jiffies) >= LINK_RETRAIN_TIMEOUT) {
> >  		dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
> >  			    " common clock\n");
> >  		i = 0;
> 
> AFAICT this can trigger false positives. !reg16 test succeeds and then
> jiffies tick.
> 
> ...it could happen before but you make it way more probable...

No, because the test moved.

I came up with this loop (off the top of my head):

<willy>         for (;;) {
<willy>                 pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
<willy>                 if (!(reg16 & PCI_EXP_LNKSTA_LT))
<willy>                         break;
<willy>                 if ((jiffies - start_jiffies) >= HZ)
<willy>                         break;
<willy>                 msleep(1);
<willy>         }

Andrew has mostly followed that ... improving it to LINK_RETRAIN_TIMEOUT
instead of HZ.

Yes, the subsequent test should be of reg16 instead of jiffies.

And we should be using time_before/after instead of the explicit
comparison.

-- 
Matthew Wilcox				Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours.  We can't possibly take such
a retrograde step."
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/