Re: 2.6.28: Is there a way to disable sata probing for certain ports?
From: Alan Jenkins
Date: Tue Dec 30 2008 - 14:08:42 EST
On Tue, Dec 30, 2008 at 5:08 PM, Grant Grundler <grundler@xxxxxxxxxx> wrote:
> On Tue, Dec 30, 2008 at 4:24 AM, Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx> wrote:
>> When I boot from an Intel X25-E SSD, it takes roughly a few seconds;
>> however, items such as:
>>
>> $ dmesg|grep link\ down
>> [ 2.447030] ata4: SATA link down (SStatus 0 SControl 300)
>> [ 4.481288] ata5: SATA link down (SStatus 0 SControl 0)
>> [ 6.501288] ata6: SATA link down (SStatus 0 SControl 0)
>> [ 8.522038] ata7: SATA link down (SStatus 0 SControl 0)
>> [ 10.552288] ata8: SATA link down (SStatus 0 SControl 0)
>>
>> Scanning for devices on channels that have nothing connected adds to the
>> boot time, is there anyway to turn off/disable scanning for certain ports to
>> help speed the boot process?
>
> Some BIOSs allow one to enable/disable each port individually.
> Have you checked the BIOS config menus for such an option?
>
> drivers/ata/libata-core.c declares "ata_force_param_buf" but I don't
> see any documentation for it despite the reference to
> Documentation/kernel-parameters.txt .
There is. Search the file for "libata.force". But it doesn't support
disabling the scan for specific ports; that has yet to be implemented.
<https://kerneltrap.org/mailarchive/linux-kernel/2008/8/11/2900064/thread>
Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/