Re: Checking module parameters

[Stefan Richter]

Nick Craig-Wood wrote:
> David Wagner <daw@xxxxxxxxxxxxxxx> wrote:
>>  Is there a way to tell what options have been applied to a currently
>>  loaded kernel module?
>> 
>>  I'm trying to force libata to use 1.5Gbps rather than 3Gbps,
...
> I had to do this recently (under debian I ended up putting
> "libata force=1.5Gbps" into /etc/modules)
> 
> You can check it is working by looking for something like this in the log
> 
> [    2.345058] ata1: FORCE: PHY spd limit set to 1.5Gbps
> [    2.345058] ata1: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106100 irq 218

There is also /sys/module/*/parameters/* which can be read and in some
cases even be written.
-- 
Stefan Richter
-=====-==--= ---= =--==
http://arcgraph.de/sr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/