[git patches] libata updates
From: Jeff Garzik
Date: Mon Feb 02 2009 - 23:27:59 EST
1) 8-patch patchset from Tejun to fix eSata cable flakiness and
WD My Book issues
2) A CompactFlash (CFA) identification fix, which also affects
drivers/ide, since drivers/ide shares some definitions with libata
via include/linux/ata.h.
Other minor fixes, and an AHCI workaround for staggered spin-up ("SSS")
from Arjan related to the async stuff.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 9 ++++-
drivers/ata/libata-core.c | 96 +++++++++++++++++++++++++++++++++-----------
drivers/ata/libata-eh.c | 87 +++++++++++++++++++++++++++++++++++++----
drivers/ata/libata-pmp.c | 2 +-
drivers/ata/libata-scsi.c | 1 +
drivers/ata/libata.h | 4 +-
drivers/ata/sata_mv.c | 4 +-
drivers/ata/sata_nv.c | 7 +++-
drivers/ata/sata_sil.c | 2 +-
include/linux/ata.h | 15 +++++--
include/linux/libata.h | 19 +++++----
11 files changed, 193 insertions(+), 53 deletions(-)
Arjan van de Ven (1):
ahci: add a module parameter to ignore the SSS flags for async scanning
Mark Lord (1):
sata_mv: Fix chip type for Hightpoint RocketRaid 1740/1742
Pasi Kärkkäinen (1):
[libata] sata_sil: Fix compilation error with libata debugging enabled
Randy Dunlap (1):
libata: fix kernel-doc warnings
Sergei Shtylyov (1):
ide/libata: fix ata_id_is_cfa() (take 4)
Tejun Heo (9):
sata_nv: ck804 has borked hardreset too
libata: fix EH device failure handling
libata: move ata_dev_disable() to libata-eh.c
libata: check onlineness before using SPD in sata_down_spd_limit()
libata: clear dev->ering in smarter way
libata: add @spd_limit to sata_down_spd_limit()
libata: improve probe failure handling
libata: add no penalty retry request for EH device handling routines
libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 77bba4c..a603bbf 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -61,9 +61,14 @@
#define EM_MSG_LED_VALUE_ON 0x00010000
static int ahci_skip_host_reset;
+static int ahci_ignore_sss;
+
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy);
static void ahci_disable_alpm(struct ata_port *ap);
@@ -2692,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
- if (!(hpriv->cap & HOST_CAP_SSS))
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 88c2428..9fbf059 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -164,6 +164,11 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+static bool ata_sstatus_online(u32 sstatus)
+{
+ return (sstatus & 0xf) == 0x3;
+}
+
/**
* ata_link_next - link iteration helper
* @link: the previous link, NULL to start
@@ -1015,18 +1020,6 @@ static const char *sata_spd_string(unsigned int spd)
return spd_str[spd - 1];
}
-void ata_dev_disable(struct ata_device *dev)
-{
- if (ata_dev_enabled(dev)) {
- if (ata_msg_drv(dev->link->ap))
- ata_dev_printk(dev, KERN_WARNING, "disabled\n");
- ata_acpi_on_disable(dev);
- ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
- ATA_DNXFER_QUIET);
- dev->class++;
- }
-}
-
static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
{
struct ata_link *link = dev->link;
@@ -2239,6 +2232,40 @@ retry:
return rc;
}
+static int ata_do_link_spd_horkage(struct ata_device *dev)
+{
+ struct ata_link *plink = ata_dev_phys_link(dev);
+ u32 target, target_limit;
+
+ if (!sata_scr_valid(plink))
+ return 0;
+
+ if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+ target = 1;
+ else
+ return 0;
+
+ target_limit = (1 << target) - 1;
+
+ /* if already on stricter limit, no need to push further */
+ if (plink->sata_spd_limit <= target_limit)
+ return 0;
+
+ plink->sata_spd_limit = target_limit;
+
+ /* Request another EH round by returning -EAGAIN if link is
+ * going faster than the target speed. Forward progress is
+ * guaranteed by setting sata_spd_limit to target_limit above.
+ */
+ if (plink->sata_spd > target) {
+ ata_dev_printk(dev, KERN_INFO,
+ "applying link speed limit horkage to %s\n",
+ sata_spd_string(target));
+ return -EAGAIN;
+ }
+ return 0;
+}
+
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
@@ -2329,6 +2356,10 @@ int ata_dev_configure(struct ata_device *dev)
return 0;
}
+ rc = ata_do_link_spd_horkage(dev);
+ if (rc)
+ return rc;
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
@@ -2784,7 +2815,7 @@ int ata_bus_probe(struct ata_port *ap)
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(&ap->link);
+ sata_down_spd_limit(&ap->link, 0);
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
@@ -2880,21 +2911,27 @@ void ata_port_disable(struct ata_port *ap)
/**
* sata_down_spd_limit - adjust SATA spd limit downward
* @link: Link to adjust SATA spd limit for
+ * @spd_limit: Additional limit
*
* Adjust SATA spd limit of @link downward. Note that this
* function only adjusts the limit. The change must be applied
* using sata_set_spd().
*
+ * If @spd_limit is non-zero, the speed is limited to equal to or
+ * lower than @spd_limit if such speed is supported. If
+ * @spd_limit is slower than any supported speed, only the lowest
+ * supported speed is allowed.
+ *
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 on success, negative errno on failure
*/
-int sata_down_spd_limit(struct ata_link *link)
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
{
u32 sstatus, spd, mask;
- int rc, highbit;
+ int rc, bit;
if (!sata_scr_valid(link))
return -EOPNOTSUPP;
@@ -2903,7 +2940,7 @@ int sata_down_spd_limit(struct ata_link *link)
* If not, use cached value in link->sata_spd.
*/
rc = sata_scr_read(link, SCR_STATUS, &sstatus);
- if (rc == 0)
+ if (rc == 0 && ata_sstatus_online(sstatus))
spd = (sstatus >> 4) & 0xf;
else
spd = link->sata_spd;
@@ -2913,8 +2950,8 @@ int sata_down_spd_limit(struct ata_link *link)
return -EINVAL;
/* unconditionally mask off the highest bit */
- highbit = fls(mask) - 1;
- mask &= ~(1 << highbit);
+ bit = fls(mask) - 1;
+ mask &= ~(1 << bit);
/* Mask off all speeds higher than or equal to the current
* one. Force 1.5Gbps if current SPD is not available.
@@ -2928,6 +2965,15 @@ int sata_down_spd_limit(struct ata_link *link)
if (!mask)
return -EINVAL;
+ if (spd_limit) {
+ if (mask & ((1 << spd_limit) - 1))
+ mask &= (1 << spd_limit) - 1;
+ else {
+ bit = ffs(mask) - 1;
+ mask = 1 << bit;
+ }
+ }
+
link->sata_spd_limit = mask;
ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
@@ -4215,6 +4261,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Devices that do not need bridging limits applied */
{ "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+ /* Devices which aren't very happy with higher link speeds */
+ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+
/* End Marker */
{ }
};
@@ -4709,8 +4758,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
/**
* ata_qc_new - Request an available ATA command, for queueing
- * @ap: Port associated with device @dev
- * @dev: Device from whom we request an available command structure
+ * @ap: target port
*
* LOCKING:
* None.
@@ -5175,7 +5223,7 @@ bool ata_phys_link_online(struct ata_link *link)
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) == 0x3)
+ ata_sstatus_online(sstatus))
return true;
return false;
}
@@ -5199,7 +5247,7 @@ bool ata_phys_link_offline(struct ata_link *link)
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) != 0x3)
+ !ata_sstatus_online(sstatus))
return true;
return false;
}
@@ -5412,8 +5460,8 @@ void ata_dev_init(struct ata_device *dev)
dev->horkage = 0;
spin_unlock_irqrestore(ap->lock, flags);
- memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
- sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+ memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+ ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8147a83..ce2ef04 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -82,6 +82,10 @@ enum {
ATA_EH_FASTDRAIN_INTERVAL = 3000,
ATA_EH_UA_TRIES = 5,
+
+ /* probe speed down parameters, see ata_eh_schedule_probe() */
+ ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */
+ ATA_EH_PROBE_TRIALS = 2,
};
/* The following table determines how we sequence resets. Each entry
@@ -1176,6 +1180,32 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc)
}
/**
+ * ata_dev_disable - disable ATA device
+ * @dev: ATA device to disable
+ *
+ * Disable @dev.
+ *
+ * Locking:
+ * EH context.
+ */
+void ata_dev_disable(struct ata_device *dev)
+{
+ if (!ata_dev_enabled(dev))
+ return;
+
+ if (ata_msg_drv(dev->link->ap))
+ ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ ata_acpi_on_disable(dev);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
+ dev->class++;
+
+ /* From now till the next successful probe, ering is used to
+ * track probe failures. Clear accumulated device error info.
+ */
+ ata_ering_clear(&dev->ering);
+}
+
+/**
* ata_eh_detach_dev - detach ATA device
* @dev: ATA device to detach
*
@@ -1849,7 +1879,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
/* speed down? */
if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
/* speed down SATA link speed if possible */
- if (sata_down_spd_limit(link) == 0) {
+ if (sata_down_spd_limit(link, 0) == 0) {
action |= ATA_EH_RESET;
goto done;
}
@@ -2601,11 +2631,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
}
if (try == max_tries - 1) {
- sata_down_spd_limit(link);
+ sata_down_spd_limit(link, 0);
if (slave)
- sata_down_spd_limit(slave);
+ sata_down_spd_limit(slave, 0);
} else if (rc == -EPIPE)
- sata_down_spd_limit(failed_link);
+ sata_down_spd_limit(failed_link, 0);
if (hardreset)
reset = hardreset;
@@ -2744,6 +2774,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
readid_flags, dev->id);
switch (rc) {
case 0:
+ /* clear error info accumulated during probe */
+ ata_ering_clear(&dev->ering);
new_mask |= 1 << dev->devno;
break;
case -ENOENT:
@@ -2947,9 +2979,24 @@ static int ata_eh_skip_recovery(struct ata_link *link)
return 1;
}
+static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
+{
+ u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
+ u64 now = get_jiffies_64();
+ int *trials = void_arg;
+
+ if (ent->timestamp < now - min(now, interval))
+ return -1;
+
+ (*trials)++;
+ return 0;
+}
+
static int ata_eh_schedule_probe(struct ata_device *dev)
{
struct ata_eh_context *ehc = &dev->link->eh_context;
+ struct ata_link *link = ata_dev_phys_link(dev);
+ int trials = 0;
if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
(ehc->did_probe_mask & (1 << dev->devno)))
@@ -2962,6 +3009,25 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
ehc->saved_xfer_mode[dev->devno] = 0;
ehc->saved_ncq_enabled &= ~(1 << dev->devno);
+ /* Record and count probe trials on the ering. The specific
+ * error mask used is irrelevant. Because a successful device
+ * detection clears the ering, this count accumulates only if
+ * there are consecutive failed probes.
+ *
+ * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
+ * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
+ * forced to 1.5Gbps.
+ *
+ * This is to work around cases where failed link speed
+ * negotiation results in device misdetection leading to
+ * infinite DEVXCHG or PHRDY CHG events.
+ */
+ ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
+ ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
+
+ if (trials > ATA_EH_PROBE_TRIALS)
+ sata_down_spd_limit(link, 1);
+
return 1;
}
@@ -2969,7 +3035,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
{
struct ata_eh_context *ehc = &dev->link->eh_context;
- ehc->tries[dev->devno]--;
+ /* -EAGAIN from EH routine indicates retry without prejudice.
+ * The requester is responsible for ensuring forward progress.
+ */
+ if (err != -EAGAIN)
+ ehc->tries[dev->devno]--;
switch (err) {
case -ENODEV:
@@ -2979,12 +3049,13 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
/* give it just one more chance */
ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
- if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
+ if (ehc->tries[dev->devno] == 1) {
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(ata_dev_phys_link(dev));
- ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ sata_down_spd_limit(ata_dev_phys_link(dev), 0);
+ if (dev->pio_mode > XFER_PIO_0)
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 98ca07a..619f2c3 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -729,7 +729,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
if (tries) {
/* consecutive revalidation failures? speed down */
if (reval_failed)
- sata_down_spd_limit(link);
+ sata_down_spd_limit(link, 0);
else
reval_failed = 1;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3c4c5ae..b9747fa 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
/**
* ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
+ * @ap: target port
* @sdev: SCSI device to get identify data for
* @arg: User buffer area for identify data
*
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index fe2839e..cea8014 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -79,7 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_dev_disable(struct ata_device *dev);
extern void ata_pio_queue_task(struct ata_port *ap, void *data,
unsigned long delay);
extern void ata_port_flush_task(struct ata_port *ap);
@@ -100,7 +99,7 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
unsigned int readid_flags);
extern int ata_dev_configure(struct ata_device *dev);
-extern int sata_down_spd_limit(struct ata_link *link);
+extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -160,6 +159,7 @@ extern void ata_scsi_error(struct Scsi_Host *host);
extern void ata_port_wait_eh(struct ata_port *ap);
extern void ata_eh_fastdrain_timerfn(unsigned long arg);
extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
+extern void ata_dev_disable(struct ata_device *dev);
extern void ata_eh_detach_dev(struct ata_device *dev);
extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
unsigned int action);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f2d8a02..4ae1a41 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -663,8 +663,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
/* RocketRAID 1720/174x have different identifiers */
{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
- { PCI_VDEVICE(TTI, 0x1740), chip_508x },
- { PCI_VDEVICE(TTI, 0x1742), chip_508x },
+ { PCI_VDEVICE(TTI, 0x1740), chip_6042 },
+ { PCI_VDEVICE(TTI, 0x1742), chip_6042 },
{ PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
{ PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index c49ad0e..444af04 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -436,11 +436,16 @@ static struct ata_port_operations nv_nf2_ops = {
.hardreset = nv_noclassify_hardreset,
};
-/* CK804 finally gets hardreset right */
+/* For initial probing after boot and hot plugging, hardreset mostly
+ * works fine on CK804 but curiously, reprobing on the initial port by
+ * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS
+ * in somewhat undeterministic way. Use noclassify hardreset.
+ */
static struct ata_port_operations nv_ck804_ops = {
.inherits = &nv_common_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
+ .hardreset = nv_noclassify_hardreset,
.host_stop = nv_ck804_host_stop,
};
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 9f02959..d009160 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -324,7 +324,7 @@ static void sil_fill_sg(struct ata_queued_cmd *qc)
prd->addr = cpu_to_le32(addr);
prd->flags_len = cpu_to_le32(sg_len);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
last_prd = prd;
prd++;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index a53318b..08a86d5 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -731,12 +731,17 @@ static inline int ata_id_current_chs_valid(const u16 *id)
static inline int ata_id_is_cfa(const u16 *id)
{
- if (id[ATA_ID_CONFIG] == 0x848A) /* Standard CF */
+ if (id[ATA_ID_CONFIG] == 0x848A) /* Traditional CF */
return 1;
- /* Could be CF hiding as standard ATA */
- if (ata_id_major_version(id) >= 3 &&
- id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
- (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
+ /*
+ * CF specs don't require specific value in the word 0 anymore and yet
+ * they forbid to report the ATA version in the word 80 and require the
+ * CFA feature set support to be indicated in the word 83 in this case.
+ * Unfortunately, some cards only follow either of this requirements,
+ * and while those that don't indicate CFA feature support need some
+ * sort of quirk list, it seems impractical for the ones that do...
+ */
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004)
return 1;
return 0;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bca3ba2..5d87bc0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -380,6 +380,7 @@ enum {
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
+ ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -580,7 +581,7 @@ struct ata_device {
acpi_handle acpi_handle;
union acpi_object *gtf_cache;
#endif
- /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+ /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
unsigned int class; /* ATA_DEV_xxx */
unsigned long unpark_deadline;
@@ -605,20 +606,22 @@ struct ata_device {
u16 heads; /* Number of heads */
u16 sectors; /* Number of sectors per track */
- /* error history */
- int spdn_cnt;
- struct ata_ering ering;
-
union {
u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
};
+
+ /* error history */
+ int spdn_cnt;
+ /* ering is CLEAR_END, read comment above CLEAR_END */
+ struct ata_ering ering;
};
-/* Offset into struct ata_device. Fields above it are maintained
- * acress device init. Fields below are zeroed.
+/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
+ * cleared to zero on ata_dev_init().
*/
-#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_BEGIN offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_END offsetof(struct ata_device, ering)
struct ata_eh_info {
struct ata_device *dev; /* offending device */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/