[PATCH] floppy: request only the ports we actually use

[Bjorn Helgaas]

The floppy driver requests an I/O port it doesn't need, and
sometimes this causes a conflict with a motherboard device
reported by PNPBIOS.

This patch makes the floppy driver request only the ports it
actually uses.

The current floppy driver uses only these ports:
    0x3f2 (FD_DOR)
    0x3f4 (FD_STATUS)
    0x3f5 (FD_DATA)
    0x3f7 (FD_DCR/FD_DIR)
but it requests 0x3f2-0x3f5 and 0x3f7, which includes the
unused port 0x3f3.

Some BIOSes report 0x3f3 as a motherboard resource.  The PNP system
driver reserves that, which causes a conflict when the floppy driver
requests 0x3f2-0x3f5 later.

Philippe reported that this conflict broke the floppy driver between
2.6.11 and 2.6.22.  His PNPBIOS reports these devices:

    $ cat 00:07/id 00:07/resources	# motherboard device
    PNP0c02
    state = active
    io 0x80-0x80
    io 0x10-0x1f
    io 0x22-0x3f
    io 0x44-0x5f
    io 0x90-0x9f
    io 0xa2-0xbf
    io 0x3f0-0x3f1
    io 0x3f3-0x3f3

    $ cat 00:03/id 00:03/resources	# floppy device
    PNP0700
    state = active
    io 0x3f4-0x3f5
    io 0x3f2-0x3f2

Reference:
    http://lkml.org/lkml/2009/1/31/162

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Reported-by: Philippe De Muyter <phdm@xxxxxxxxx>
Tested-by: Philippe De Muyter <phdm@xxxxxxxxx>
CC: Adam M Belay <abelay@xxxxxxx>
CC: Robert Hancock <hancockrwd@xxxxxxxxx>
---
 drivers/block/floppy.c |   16 ++++++++++++----
 1 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf29cc4..44f711b 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4399,15 +4399,20 @@ static int floppy_grab_irq_and_dma(void)
 
 	for (fdc = 0; fdc < N_FDC; fdc++) {
 		if (FDCS->address != -1) {
-			if (!request_region(FDCS->address + 2, 4, "floppy")) {
+			if (!request_region(FDCS->address + 2, 1, "floppy")) {
 				DPRINT("Floppy io-port 0x%04lx in use\n",
 				       FDCS->address + 2);
 				goto cleanup1;
 			}
+			if (!request_region(FDCS->address + 4, 2, "floppy")) {
+				DPRINT("Floppy io-port 0x%04lx in use\n",
+				       FDCS->address + 4);
+				goto cleanup2;
+			}
 			if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
 				DPRINT("Floppy io-port 0x%04lx in use\n",
 				       FDCS->address + 7);
-				goto cleanup2;
+				goto cleanup3;
 			}
 			/* address + 6 is reserved, and may be taken by IDE.
 			 * Unfortunately, Adaptec doesn't know this :-(, */
@@ -4432,13 +4437,16 @@ static int floppy_grab_irq_and_dma(void)
 	fdc = 0;
 	irqdma_allocated = 1;
 	return 0;
+cleanup3:
+	release_region(FDCS->address + 4, 2);
 cleanup2:
-	release_region(FDCS->address + 2, 4);
+	release_region(FDCS->address + 2, 1);
 cleanup1:
 	fd_free_irq();
 	fd_free_dma();
 	while (--fdc >= 0) {
-		release_region(FDCS->address + 2, 4);
+		release_region(FDCS->address + 2, 1);
+		release_region(FDCS->address + 4, 2);
 		release_region(FDCS->address + 7, 1);
 	}
 	spin_lock_irqsave(&floppy_usage_lock, flags);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/