Re: [PATCH 4/5] Blackfin SPI Driver: Add GPIO controlled SPI SlaveSelect support

[Andrew Morton]

On Thu,  5 Feb 2009 18:07:32 +0800
Bryan Wu <cooloney@xxxxxxxxxx> wrote:

> 
> This patch adds support for GPIO controlled SPI Chip Selects.
> To make use of this feature, set chip_select = 0 and add a proper
> cs_gpio to your controller_data.
> 
> struct spi_board_info
>         .chip_select = 0
> 
> struct bfin5xx_spi_chip
>         .cs_gpio = GPIO_P###
> 
> There are various SPI devices that require SPI MODE_0,
> and need to have the Chip Selects asserted during the entire transfer.
> Consider using SPI_MODE_3 (SPI_CPHA | SPI_CPOL) if your device allows
> it.

Cannot apply this due to previously-mentioned driver-core-tramplings.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/