Re: WOL with forcedeth broken sincef55c21fd9a92a444e55ad1ca4e4732d56661bf2e

[Philipp Matthias Hahn]

Hello!

On Thu, Jan 29, 2009 at 10:53:40PM -0800, Yinghai Lu wrote:
> can not find the reason why the WOL doesn't work...
> 
> please post
> 1. boot log for just after AC is pluged-in... ===> you should have
> "nv_probe: set workaround bit for reversed mac addr"
> 2. and boot log after boot from WOL...==> you have have "nv_probe: set
> workaround bit for reversed mac addr" too.

On Wed, Feb 04, 2009 at 11:58:53AM +0100, Rafael J. Wysocki wrote:
> Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=12614
> Subject		: WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e
> Submitter	: Philipp Matthias Hahn <pmhahn@xxxxxxxxxxxxx>
> Date		: 2009-01-29 6:31 (7 days old)
> References	: http://marc.info/?l=linux-kernel&m=123321232825316&w=4
> Handled-By	: Yinghai Lu <yinghai@xxxxxxxxxx>
> Patch		: http://marc.info/?l=linux-kernel&m=123330459229248&w=4

Strage, at the moment I can't seem to reproduce the problem. I've
switched back to the version of 2.6.28.3 and now it seems to work.
I'll continue with tesing.

Some additional data:
The BIOS-upgrade tool (Afud408.exe) resets the MAC address. I had to run
the tool a second time to re-programm the MAC-address using its /M
option. I useed the unreversed MAC-address back than.
I also tried the reversed address once, but after that forcedeth.c
complained about a wrong MAC-address.

If I completely turn off the power (pull the plug), WOL doesn't work,
even when it's enabled in the BIOS.

Only after I'v started Linux, do "echo NMAC > /proc/acpi/wakeup" and
"ethtool -s eth0 wol g" does it work again.

Nether the less here's the output of dmesg:
        forcedeth: Reverse Engineered nFoce ethernet driver. Version 0.61.
        ACPI: PCI Interrupt Link [LMAC] enables at IRQ 23
        forcedeth: 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
        forcedeth: 0000:00:14.0: setting latency timer to 64
*       nv_probe: MAC_ADDR_REV ELSE
        nv_probe: set workaround bit for reversed mac addr
        forcedeth: 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:db:f2:e1:35
        forcedeth: 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
The line maked * was inserted by me in the source file for my debugging.

BYtE
Philipp Hahn
-- 
  / /  (_)__  __ ____  __ Philipp Hahn
 / /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ pmhahn@xxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/