System hangs (after some hours of working) since kernel 2.6.22.19

From: Alexander Naumann
Date: Fri Feb 06 2009 - 04:06:53 EST

Next message: Bert Wesarg: "[PATCH urcu] Use pthread_equal() for pthread_t's equality test"
Previous message: info: "Google Online Promo © 2009"
Next in thread: Pekka Enberg: "Re: System hangs (after some hours of working) since kernel 2.6.22.19"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi guys,

I hope anybody is willing and able to help me with this bug.

Summary of this bug ist hat system stops working afterÂ a couple of hours (between 30 minutes and 6 hours).
There are no messages at all â
It just stops, I even cannot use some keys like SysRq (this ALT-PrintScreen thing).

The only thing I am running is tiobench (to force system halt):
âtiobench --numruns 10000â
If I am running nothing, the system does not stop working or it takres verly long until it hangs.

It cannot be a hardware defect because I have several equal machines and they all have the same problem.

This error occures since Kernel version 2.6.22.19.
I have tried several kernels like 2.6.23, 2.6.24., 2.6.24.7, 2.6.25, 2.6.26, 2.6.28.2
With all of them the system hangs without any message.
Before 2.6.22.19 I had no problems at all.

Last lines in syslog can be like this:
[â]
Jan 31 01:30:03 localhost CRON[6050]: (pam_unix) session closed for user root
Jan 31 01:33:34 localhost storage-manager[4489]: Trigger replication manager every 2h
FebÂ 6 09:11:14 localhost syslogd 1.4.1#18: restart.
FebÂ 6 09:11:14 localhost udev[3646]: creating device node '/dev/vcsa1'
[â]

So nothing serious.

I have found some configuration of linux kernel so that this hang up does not occur:
In 2.6.24.7 I have enabled ALL kernel debug options, the system did not crash.

Also I have included two config files for kernel 2.6.22.19.
With one of them the system chrashes (crashing.config) with the other one it does not (working.config).
The only difference between these two config files is that I enabled âKernel Debugâ.

With all other tested kernel version I cannot see the same behaviour, they all crash after some hours, it does not matter how kernel is configured.

So is anybody able to help me with this problem.
Are more informations needed?
I think I can also give access to the system if necessary.

Thanks in advance,

Alex

Her eis a list of installed libraries and tools on my system.
I am compiling the kernel on another system because the system that crahses is too slow.

Gnu CÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 4.1.2
Gnu makeÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 3.81
binutilsÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.17
util-linuxÂÂÂÂÂÂÂÂÂÂÂÂ 2.12r
mountÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.12r
module-init-toolsÂÂÂÂÂ 3.3-pre2
e2fsprogsÂÂÂÂÂÂÂÂÂÂÂÂÂ 1.40-WIP
xfsprogsÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.8.11
PPPÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 2.4.4
nfs-utilsÂÂÂÂÂÂÂÂÂÂÂÂÂ 1.0.6
Linux C LibraryÂÂÂÂÂÂÂ 2.3.6
Dynamic linker (ldd)ÂÂ 2.3.6
ProcpsÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 3.2.7
Net-toolsÂÂÂÂÂÂÂÂÂÂÂÂÂ 1.60
Console-toolsÂÂÂÂÂÂÂÂÂ 0.2.3
Sh-utilsÂÂÂÂÂÂÂÂÂÂÂ ÂÂÂ5.97
udevÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 105
Modules LoadedÂÂÂÂÂÂÂÂ af_packet crc32c libcrc32c iscsi_tcp libiscsi scsi_transport_iscsi aes_generic bridge stp llc xt_physdev ipt_REDIRECT iptable_nat nf_nat ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables ipv6 fan ac ide_scsi e1000 fuse dm_round_robin dm_multipath scsi_dh thermal usb_storage psmouse ehci_hcd serio_raw sisfb pcspkr rtc_cmos rtc_core rtc_lib uhci_hcd i2c_i801 evdev usbcore iTCO_wdt iTCO_vendor_support e1000e qla2xxx button processor container thermal_sys unix

dmsg output:
pci 0000:00:07.2: reg 20 io port: [0xc400-0xc41f]
pci 0000:00:07.3: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
pci 0000:00:07.5: reg 10 io port: [0xcc00-0xccff]
pci 0000:00:07.5: reg 14 io port: [0xd000-0xd003]
pci 0000:00:07.5: reg 18 io port: [0xd400-0xd403]
pci 0000:00:08.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:00:08.0: reg 14 32bit mmio: [0xe5810000-0xe58100ff]
pci 0000:00:08.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10 io port: [0xdc00-0xdcff]
pci 0000:00:09.0: reg 14 32bit mmio: [0xe5811000-0xe58110ff]
pci 0000:00:09.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:0b.0: reg 14 32bit mmio: [0xe5812000-0xe58120ff]
pci 0000:00:0b.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xe4000000-0xe47fffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe5000000-0xe501ffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xe4800000-0xe4ffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe57fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xe5800-0xe7fff has been reserved
system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0xf7f0000-0xf7fffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0xf7effff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:ÂÂ IO window: disabled
pci 0000:00:01.0:ÂÂ MEM window: 0xe4000000-0xe57fffff
pci 0000:00:01.0:ÂÂ PREFETCH window: 0x00000010000000-0x000000100fffff
pci 0000:00:01.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 mmio: [0x0-0x0]
bus: 01 index 1 mmio: [0xe4000000-0xe57fffff]
bus: 01 index 2 mmio: [0x10000000-0x100fffff]
bus: 01 index 3 mmio: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 479
alg: No test for stdrng (krng)
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected.Disabling DAC.
pci 0000:00:07.0: Disabling VIA external APIC routing
pci 0000:01:00.0: Boot video device
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver
via82cxxx 0000:00:07.1: VIA vt82c686b (rev 40) IDE UDMA100
via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
ÂÂÂ ide0: BM-DMA at 0xc000-0xc007
ÂÂÂ ide1: BM-DMA at 0xc008-0xc00f
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: ST94813A, ATA DISK drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hdc: max request size: 512KiB
hdc: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
Âhdc: hdc1 hdc2
ide-cd driver 5.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
DC390: clustering now enabled by default. If you get problems load
ÂÂÂÂÂÂ with "disable_clustering=1" and report to maintainers
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
Driver 'sd' needs updating - please use bus_type methods
Error: Driver 'pata_platform' is already registered, aborting...
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1ÂÂÂ 153 MB/s
raid6: int32x2ÂÂÂ 165 MB/s
raid6: int32x4ÂÂÂ 147 MB/s
raid6: int32x8ÂÂÂ 115 MB/s
raid6: mmxx1ÂÂÂÂÂ 352 MB/s
raid6: mmxx2ÂÂÂÂÂ 475 MB/s
raid6: sse1x1ÂÂÂÂ 304 MB/s
raid6: sse1x2ÂÂÂÂ 462 MB/s
raid6: using algorithm sse1x2 (462 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
TCP cubic registered
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.Â Commit interval 5 seconds
EXT3-fs: hdc2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1259308
EXT3-fs: hdc2: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 300k freed
NET: Registered protocol family 1
Adding 787144k swap on /dev/hdc1.Â Priority:-1 extents:1 across:787144k
EXT3 FS on hdc2, internal journal
input: PC Speaker as /class/input/input1
input: PS/2 Generic Mouse as /class/input/input2
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
8139too 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
eth0: RealTek RTL8139 at 0xd800, 00:40:f4:8a:b7:e7, IRQ 5
eth0:Â Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
8139too 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
eth1: RealTek RTL8139 at 0xdc00, 00:40:f4:8a:b7:e6, IRQ 10
eth1:Â Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
8139too 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
eth2: RealTek RTL8139 at 0xe000, 00:40:f4:8a:b7:e5, IRQ 11
eth2:Â Identified 8139 chip type 'RTL-8100B/8139D'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 0 to 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x0000c400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.2 uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 255 to 5
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 5, io base 0x0000c800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.2 uhci_hcd
usb usb2: SerialNumber: 0000:00:07.3
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
mice: PS/2 mouse device common for all mice
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 2 throttling states)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
Marking TSC unstable due to possible TSC halt in C2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (3967 buckets, 15868 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
mng: link down
ADDRCONF(NETDEV_UP): mng: link is not ready
Bridge firewalling registered
device wan entered promiscuous mode
device lan entered promiscuous mode
br0: starting userspace STP failed, starting kernel STP
wan: link up, 100Mbps, full-duplex, lpa 0xC5E1
lan: link down
ADDRCONF(NETDEV_UP): lan: link is not ready
br0: port 1(wan) entering listening state
NET: Registered protocol family 17
warning: `named' uses 32-bit capabilities (legacy support in use)
br0: port 1(wan) entering learning state
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
wan: no IPv6 routers present
br0: no IPv6 routers present
br0: port 1(wan) entering forwarding state

cat /proc/cpuinfo:
processorÂÂÂÂÂÂ : 0
vendor_idÂÂÂÂÂÂ : CentaurHauls
cpu familyÂÂÂÂÂ : 6
modelÂÂÂÂÂÂÂÂÂÂ : 9
model nameÂÂÂÂÂ : VIA Nehemiah
steppingÂÂÂÂÂÂÂ : 8
cpu MHzÂÂÂÂÂÂÂÂ : 998.537
cache sizeÂÂÂÂÂ : 64 KB
fdiv_bugÂÂÂÂÂÂÂ : no
hlt_bugÂÂÂÂÂÂÂÂ : no
f00f_bugÂÂÂÂÂÂÂ : no
coma_bugÂÂÂÂÂÂÂ : no
fpuÂÂÂÂÂÂÂÂÂÂÂÂ : yes
fpu_exceptionÂÂ : yes
cpuid levelÂÂÂÂ : 1
wpÂÂÂÂÂÂÂÂÂÂÂÂÂ : yes
flagsÂÂÂÂÂÂÂÂÂÂ : fpu vme de pse tsc msr cx8 sep mtrr pge cmov pat mmx fxsr sse up rng rng_en ace ace_en
bogomipsÂÂÂÂÂÂÂ : 1997.07
clflush sizeÂÂÂ : 32
power management:

The following values are from a running 2.6.28.2 kernel (which one also hangs)

cat /proc/modules
iscsi_tcp 16136 0 - Live 0xd1040000
libiscsi 27648 1 iscsi_tcp, Live 0xd0fe2000
scsi_transport_iscsi 28184 3 iscsi_tcp,libiscsi, Live 0xd0fb6000
af_packet 16000 2 - Live 0xd0ed2000
bridge 40980 0 - Live 0xd0e48000
stp 3332 1 bridge, Live 0xd0e31000
llc 6668 2 bridge,stp, Live 0xd0e1e000
xt_physdev 3216 7 - Live 0xd0ddc000
ipt_REDIRECT 2688 14 - Live 0xd0d8a000
iptable_nat 5892 1 - Live 0xd0d7c000
nf_nat 16148 2 ipt_REDIRECT,iptable_nat, Live 0xd0d62000
ipt_REJECT 3840 5 - Live 0xd0cd0000
xt_tcpudp 3840 33 - Live 0xd0c6c000
nf_conntrack_ipv4 7688 4 iptable_nat,nf_nat, Live 0xd0c4c000
nf_defrag_ipv4 2944 1 nf_conntrack_ipv4, Live 0xd0c40000
xt_state 2944 1 - Live 0xd0c36000
nf_conntrack 51640 4 iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state, Live 0xd0bb4000
iptable_filter 3584 1 - Live 0xd0b98000
ip_tables 11280 2 iptable_nat,iptable_filter, Live 0xd0b8c000
x_tables 14596 7 xt_physdev,ipt_REDIRECT,iptable_nat,ipt_REJECT,xt_tcpudp,xt_state,ip_tables, Live 0xd0b7c000
ipv6 208884 30 - Live 0xd04ec000
thermal 16540 0 - Live 0xd049a000
fan 5380 0 - Live 0xd048a000
button 7184 0 - Live 0xd0472000
processor 34076 1 thermal, Live 0xd043b000
thermal_sys 11688 3 thermal,fan,processor, Live 0xd0424000
ac 4868 0 - Live 0xd0416000
mousedev 11656 0 - Live 0xd03d1000
rtc_cmos 10412 0 - Live 0xd0390000
rtc_core 14748 1 rtc_cmos, Live 0xd0354000
rtc_lib 3840 1 rtc_core, Live 0xd0349000
8139cp 18432 0 - Live 0xd0273000
i2c_viapro 8084 0 - Live 0xd0263000
via686a 13068 0 - Live 0xd0254000
uhci_hcd 19852 0 - Live 0xd01f7000
usbcore 117904 2 uhci_hcd, Live 0xd00b0000
8139too 22400 0 - Live 0xd002c000
mii 5760 2 8139cp,8139too, Live 0xd001d000
via_agp 8960 1 - Live 0xd03ba000
pcspkr 3456 0 - Live 0xd03a8000
psmouse 28168 0 - Live 0xd0304000
unix 21936 38 - Live 0xd0015000

archive:~# lspci -vvv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. VT8601 [Apollo ProMedia]
ÂÂÂÂÂÂÂ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 8
ÂÂÂÂÂÂÂ Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
ÂÂÂÂÂÂÂ Capabilities: [a0] AGP version 2.0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (prog-if 00 [Normal decode])
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
ÂÂÂÂÂÂÂ Latency: 0
ÂÂÂÂÂÂÂ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
ÂÂÂÂÂÂÂ I/O behind bridge: 0000f000-00000fff
ÂÂÂÂÂÂÂ Memory behind bridge: e4000000-e57fffff
ÂÂÂÂÂÂÂ Prefetchable memory behind bridge: 10000000-100fffff
ÂÂÂÂÂÂÂ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
ÂÂÂÂÂÂÂ Capabilities: [80] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 0
ÂÂÂÂÂÂÂ Capabilities: [c0] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32
ÂÂÂÂÂÂÂ Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
ÂÂÂÂÂÂÂ Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
ÂÂÂÂÂÂÂ Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
ÂÂÂÂÂÂÂ Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
ÂÂÂÂÂÂÂ Region 4: I/O ports at c000 [size=16]
ÂÂÂÂÂÂÂ Capabilities: [c0] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32, Cache Line Size: 0x08 (32 bytes)
ÂÂÂÂÂÂÂ Interrupt: pin D routed to IRQ 5
ÂÂÂÂÂÂÂ Region 4: I/O ports at c400 [size=32]
ÂÂÂÂÂÂÂ Capabilities: [80] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂ ÂÂStatus: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32, Cache Line Size: 0x08 (32 bytes)
ÂÂÂÂÂÂÂ Interrupt: pin D routed to IRQ 5
ÂÂÂÂÂÂÂ Region 4: I/O ports at c800 [size=32]
ÂÂÂÂÂÂÂ Capabilities: [80] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
ÂÂÂÂÂÂÂ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Interrupt: pin ? routed to IRQ 11
ÂÂÂÂÂÂÂ Capabilities: [68] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
ÂÂÂÂÂÂÂ Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller
ÂÂÂÂÂÂÂ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Interrupt: pin C routed to IRQ 9
ÂÂÂÂÂÂÂ Region 0: I/O ports at cc00 [size=256]
ÂÂÂÂÂÂÂ Region 1: I/O ports at d000 [size=4]
ÂÂÂÂÂÂÂ Region 2: I/O ports at d400 [size=4]
ÂÂÂÂÂÂÂ Capabilities: [c0] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
ÂÂÂÂÂÂÂ Subsystem: Realtek Semiconductor Co., Ltd. RT8139
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32 (8000ns min, 16000ns max)
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 5
ÂÂÂÂÂÂÂ Region 0: I/O ports at d800 [size=256]
ÂÂÂÂÂÂÂ Region 1: Memory at e5810000 (32-bit, non-prefetchable) [size=256]
ÂÂÂÂÂÂÂ Expansion ROM at 10100000 [disabled] [size=64K]
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
ÂÂÂÂÂÂÂ Subsystem: Realtek Semiconductor Co., Ltd. RT8139
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32 (8000ns min, 16000ns max)
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 10
ÂÂÂÂÂÂÂ Region 0: I/O ports at dc00 [size=256]
ÂÂÂÂÂÂÂ Region 1: Memory at e5811000 (32-bit, non-prefetchable) [size=256]
ÂÂÂÂÂÂÂ Expansion ROM at 10110000 [disabled] [size=64K]
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
ÂÂÂÂÂÂÂ Subsystem: Realtek Semiconductor Co., Ltd. RT8139
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32 (8000ns min, 16000ns max)
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 11
ÂÂÂÂÂÂÂ Region 0: I/O ports at e000 [size=256]
ÂÂÂÂÂÂÂ Region 1: Memory at e5812000 (32-bit, non-prefetchable) [size=256]
ÂÂÂÂÂÂÂ Expansion ROM at 10120000 [disabled] [size=64K]
ÂÂÂÂÂÂÂ Capabilities: [50] Power Management version 2
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) (prog-if 00 [VGA])
ÂÂÂÂÂÂÂ Subsystem: Trident Microsystems CyberBlade/i1
ÂÂÂÂÂÂÂ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
ÂÂÂÂÂÂÂ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
ÂÂÂÂÂÂÂ Latency: 32
ÂÂÂÂÂÂÂ Interrupt: pin A routed to IRQ 5
ÂÂÂÂÂÂÂ Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=8M]
ÂÂÂÂÂÂÂ Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128K]
ÂÂÂÂÂÂÂ Region 2: Memory at e4800000 (32-bit, non-prefetchable) [size=8M]
ÂÂÂÂÂÂÂ Expansion ROM at 10000000 [disabled] [size=64K]
ÂÂÂÂÂÂÂ Capabilities: [80] AGP version 2.0
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
ÂÂÂÂÂÂÂÂÂÂÂÂÂ ÂÂCommand: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
ÂÂÂÂÂÂÂ Capabilities: [90] Power Management version 1
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ Status: D0 PME-Enable- DSel=0 DScale=0 PME-

archive:~# cat /proc/io
iomemÂÂÂ ioports
archive:~# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:07.1
Â 0170-0177 : via82cxxx
01f0-01f7 : 0000:00:07.1
Â 01f0-01f7 : via82cxxx
02f8-02ff : serial
0376-0376 : 0000:00:07.1
Â 0376-0376 : via82cxxx
03c0-03df : vga+
03f6-03f6 : 0000:00:07.1
Â 03f6-03f6 : via82cxxx
03f8-03ff : serial
04d0-04d1 : pnp 00:02
0cf8-0cff : PCI conf1
4000-4003 : ACPI PM1a_EVT_BLK
4008-400b : ACPI PM_TMR
4010-4015 : ACPI CPU throttle
4020-4023 : ACPI GPE0_BLK
40f0-40f1 : ACPI PM1a_CNT_BLK
5000-500f : 0000:00:07.4
Â 5000-5007 : vt596_smbus
6000-607f : via686a
Â 6000-607f : 0000:00:07.4
ÂÂÂ 6000-607f : via686a
c000-c00f : 0000:00:07.1
Â c000-c00f : via82cxxx
c400-c41f : 0000:00:07.2
Â c400-c41f : uhci_hcd
c800-c81f : 0000:00:07.3
Â c800-c81f : uhci_hcd
cc00-ccff : 0000:00:07.5
d000-d003 : 0000:00:07.5
d400-d403 : 0000:00:07.5
d800-d8ff : 0000:00:08.0
Â d800-d8ff : 8139too
dc00-dcff : 0000:00:09.0
Â dc00-dcff : 8139too
e000-e0ff : 0000:00:0b.0
Â e000-e0ff : 8139too

archive:~# cat /proc/iomem
00000000-0000ffff : reserved
00010000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cbfff : Video ROM
000cc000-000cffff : pnp 00:00
000d0000-000da7ff : Adapter ROM
000db000-000e57ff : Adapter ROM
000e5800-000e7fff : pnp 00:00
000f0000-000fffff : reserved
Â 000f0000-000fffff : System ROM
00100000-0f7effff : System RAM
Â 00100000-0045448b : Kernel code
Â 0045448c-005d983b : Kernel data
Â 0062d000-006776d3 : Kernel bss
Â 011f1000-011f1fff : Local APIC
0f7f0000-0f7f2fff : ACPI Non-volatile Storage
0f7f3000-0f7fffff : ACPI Tables
10000000-100fffff : PCI Bus 0000:01
Â 10000000-1000ffff : 0000:01:00.0
10100000-1010ffff : 0000:00:08.0
10110000-1011ffff : 0000:00:09.0
10120000-1012ffff : 0000:00:0b.0
e0000000-e3ffffff : 0000:00:00.0
e4000000-e57fffff : PCI Bus 0000:01
Â e4000000-e47fffff : 0000:01:00.0
Â e4800000-e4ffffff : 0000:01:00.0
Â e5000000-e501ffff : 0000:01:00.0
e5810000-e58100ff : 0000:00:08.0
Â e5810000-e58100ff : 8139too
e5811000-e58110ff : 0000:00:09.0
Â e5811000-e58110ff : 8139too
e5812000-e58120ff : 0000:00:0b.0
Â e5812000-e58120ff : 8139too
fee00000-fee00fff : pnp 00:00
ffff0000-ffffffff : reserved
Â ffff0000-ffffffff : pnp 00:00

archive:~# cat /proc/scsi/scsi
Attached devices:

Attachment: crashing.config
Description: crashing.config

Attachment: working.config
Description: working.config

Next message: Bert Wesarg: "[PATCH urcu] Use pthread_equal() for pthread_t's equality test"
Next in thread: Pekka Enberg: "Re: System hangs (after some hours of working) since kernel 2.6.22.19"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]