Re: [PATCH] libata: Don't trust current capacity values in identifywords 57-58

From: Mark Lord
Date: Mon Feb 16 2009 - 18:03:32 EST


Mark Lord wrote:
Robert Hancock wrote:
Hanno BÃck reported a problem where an old Conner CP30254 240MB hard drive
was reported as 1.1TB in capacity by libata:

http://lkml.org/lkml/2009/2/13/134

This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the
current CHS translation values appear valid. Unfortunately it seems older
ATA specs were vague about what this field should contain and a number of drives
used values with wrong byte order or that were totally bogus. There's no
unique information that it conveys and so we can just calculate the number
of sectors from the reported current CHS values.

Signed-off-by: Robert Hancock <hancockrwd@xxxxxxxxx>
..
} else {
if (ata_id_current_chs_valid(id))
- return ata_id_u32(id, 57);
+ return id[54] * id[55] * id[56];
else
return id[1] * id[3] * id[6];
..

NAK. That's not quite correct, either.

The LBA capacity can be larger than the CHS capacity,
so we have to use the reported LBA values if at all possible.

That's why ata_id_is_lba_capacity_ok() exists,
and why it looks so peculiar.

Some of those early drives really did require that kind of logic.
..

Mind you, one can do better than that, too.

The "10% solution" in there right now is a bit of a (working) hack.
It really probably just needs to check for a flipped-LBA
that is within +/- one full cylinder of the CHS capacity.

Cheers
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/