Re: [Bug #12650] Strange load average and ksoftirqd behavior with2.6.29-rc2-git1

[Frederic Weisbecker]

On Tue, Feb 17, 2009 at 07:10:46AM -0800, Paul E. McKenney wrote:
> On Tue, Feb 17, 2009 at 05:34:23AM +0100, Frederic Weisbecker wrote:
> > On Mon, Feb 16, 2009 at 02:39:44PM -0800, Paul E. McKenney wrote:
> > > On Mon, Feb 16, 2009 at 09:09:23PM +0100, Ingo Molnar wrote:
> > > > 
> > > > * Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx> wrote:
> > > > 
> > > > > Here the calls to rcu_process_callbacks() are only 75 
> > > > > microseconds apart, so that this function is consuming more 
> > > > > than 10% of a CPU.  The strange thing is that I don't see a 
> > > > > raise_softirq() in between, though perhaps it gets inlined or 
> > > > > something that makes it invisible to ftrace.
> > > > 
> > > > look at the latest trace please, that has even the most inline 
> > > > raise-softirq method instrumented, so all the raising is 
> > > > visible.
> > > 
> > > Ah, my apologies!  This time looking at:
> > > 
> > > http://damien.wyart.free.fr/ksoftirqd_pb/trace_tip_2009.02.16_ksoftirqd_pb_abstime_proc.txt.gz
> > > 
> > > 
> > >   799.521187 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.521371 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.521555 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.521738 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.521934 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.522068 |   1)  ksoftir-2324  |               |                rcu_check_callbacks() {
> > >   799.522208 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.522392 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.522575 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.522759 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.522956 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.523074 |   1)  ksoftir-2324  |               |                  rcu_check_callbacks() {
> > >   799.523214 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.523397 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.523579 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.523762 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.523960 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.524079 |   1)  ksoftir-2324  |               |                  rcu_check_callbacks() {
> > >   799.524220 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.524403 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.524587 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > >   799.524770 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> > > [ . . . ]
> > > 
> > > Yikes!!!
> > > 
> > > Why is rcu_check_callbacks() being invoked so often?  It should be called
> > > but once per jiffy, and here it is called no less than 22 times in about
> > > 3.5 milliseconds, meaning one call every 160 microseconds or so.
> > > 
> > > Hmmm...
> > > 
> > > Looks like we never return from:
> > > 
> > >   799.521142 |   1)    <idle>-0    |          | tick_nohz_stop_sched_tick() {
> > > 
> > > Perhaps we are taking an interrupt immediately after the
> > > local_irq_restore()?  And at 799.521209 deciding to exit nohz mode.
> > > And then deciding to go back into nohz mode at 799.521326, 117
> > > microseconds later, after which we re-invoke rcu_check_callbacks(),
> > > which again raises RCU's softirq.
> > > 
> > > And the reason we are invoking rcu_check_callbacks() so often appears
> > > to be in in arch/x86/kernel/process_32.c cpu_idle() near line 107,
> > > which explains my failure to reproduce on a 64-bit system:
> > > 
> > > 	void cpu_idle(void)
> > > 	{
> > > 		int cpu = smp_processor_id();
> > > 
> > > 		current_thread_info()->status |= TS_POLLING;
> > > 
> > > 		/* endless idle loop with no priority at all */
> > > 		while (1) {
> > > 			tick_nohz_stop_sched_tick(1);
> > > 			while (!need_resched()) {
> > > 
> > > 				check_pgt_cache();
> > > 				rmb();
> > > 
> > > 				if (rcu_pending(cpu))
> > > 					rcu_check_callbacks(cpu, 0);
> > > 
> > > 				if (cpu_is_offline(cpu))
> > > 					play_dead();
> > > 
> > > 				local_irq_disable();
> > > 				__get_cpu_var(irq_stat).idle_timestamp = jiffies;
> > > 				/* Don't trace irqs off for idle */
> > > 				stop_critical_timings();
> > > 				pm_idle();
> > > 				start_critical_timings();
> > > 			}
> > > 			tick_nohz_restart_sched_tick();
> > > 			preempt_enable_no_resched();
> > > 			schedule();
> > > 			preempt_disable();
> > > 		}
> > > 	}
> > > 
> > > If we go in and out of nohz mode quickly, we will invoke rcu_pending()
> > > each time.  I would expect rcu_pending() to return 0 most of the time,
> > > but that apparently isn't the case with treercu...
> > > 
> > > What is the easiest way for me to make it easy to trace the return path
> > > from __rcu_pending()?  Make each return path call an empty function
> > > located off where the compiler cannot see it, I guess...  Diagnostic
> > > patch along these lines below.  Frederic, Damien, could you please give
> > > it a go?  (And of course please let me know if something else is
> > > needed.)
> > 
> > 
> > No, you don't need that, you can use ftrace_printk, it will generate a C-comment like
> > inside the functions, ie:
> > 
> > __rcu_pending() {
> > 	 /* pending_qs */
> > }
> 
> Ah!!!  So if I were to put ftrace_printk() calls at strategic points
> in the RCU code, that would be a good thing?
> 
> > I've converted your below patch with ftrace_printks and tested it under an old P2
> > with rcu_tree and 1000 Hz. I made a trace during an idle state, and well, looks like I'm
> > lucky :-) 
> > I guess I successfully reproduced the softirq/rcu overhead.
> > Please find the below patch to trace the rcu_pending return path, as well as the trace I made.
> > Sorry, the trace is a bit buggy with sometimes flying orphans C like comments.
> > When I will have more time, I will fix that.
> > 
> > The trace is here http://dl.free.fr/uyWGgCbx4
> > 
> > It looks like it mostly returns 1 because of the waiting for quiescent state:
> > 
> > $ cat rcutrace | grep "/* pending_none" | wc -l
> > 221
> > $ cat rcutrace | grep "/* pending_qs" | wc -l
> > 248
> > $ cat rcutrace | grep "/* pending" | wc -l
> > 469
> 
> Hmmm...  This looks like normal behavior.  Though I wonder if
> rcu_check_callbacks() is recognizing that we are in the idle loop given
> the large number of "pending_qs" entries.  To that end, would you be
> willing to try the attached patch (on top of your ftrace_printk() patch)?
> 
> Add ftrace_printk() to rcu_check_callbacks() to allow ftrace to
> determine when RCU has detected a quiescent state due to interrupting
> from within it.


Do you still need this trace even if your solution were applied on -tip ?

 
> Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
> ---
> 
>  rcutree.c |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/kernel/rcutree.c b/kernel/rcutree.c
> index b2fd602..fa14a0f 100644
> --- a/kernel/rcutree.c
> +++ b/kernel/rcutree.c
> @@ -966,6 +966,7 @@ void rcu_check_callbacks(int cpu, int user)
>  
>  		rcu_qsctr_inc(cpu);
>  		rcu_bh_qsctr_inc(cpu);
> +		ftrace_printk("rcu user/idle");
>  
>  	} else if (!in_softirq()) {
>  
> @@ -977,6 +978,7 @@ void rcu_check_callbacks(int cpu, int user)
>  		 */
>  
>  		rcu_bh_qsctr_inc(cpu);
> +		ftrace_printk("rcu !softirq");
>  	}
>  	raise_softirq(RCU_SOFTIRQ);
>  }

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/