[PATCH] [ARM] pxa: add base support for Marvell's PXA168 processor line
From: Eric Miao
Date: Thu Feb 19 2009 - 08:48:45 EST
From: Eric Miao <eric.miao@xxxxxxxxxxx>
"""The Marvell PXA168 processor is the first in a family of application
processors targeted at mass market opportunities in computing and consumer
devices. It balances high computing and multimedia performance with low
power consumption to support extended battery life, and includes a wealth
of integrated peripherals to reduce overall BOM cost .... """
See http://www.marvell.com/featured/pxa168.jsp for more information.
1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core,
there are many enhancements like instructions for flushing the
whole D-cache, and so on
2. Clock reuses Russell's common clkdev, and added the basic support
for UART1/2.
3. Devices are a bit different from the 'mach-pxa' way, the platform
devices are now dynamically allocated only when necessary (i.e.
when pxa_register_device() is called). Description for each device
are stored in an array of 'struct pxa_device_desc'. Now that:
a. this array of device description is marked with __initdata and
can be freed up system is fully up
b. which means board code has to add all needed devices early in
his initializing function
c. platform specific data can now be marked as __initdata since
they are allocated and copied by platform_device_add_data()
4. only the basic UART1/2/3 are added, more devices will come later.
Signed-off-by: Jason Chagas <chagas@xxxxxxxxxxx>
Signed-off-by: Eric Miao <eric.miao@xxxxxxxxxxx>
---
arch/arm/Kconfig | 16 +
arch/arm/Makefile | 1 +
arch/arm/boot/compressed/head.S | 12 +
arch/arm/include/asm/cacheflush.h | 8 +
arch/arm/include/asm/proc-fns.h | 8 +
arch/arm/mach-mmp/Kconfig | 20 ++
arch/arm/mach-mmp/Makefile | 11 +
arch/arm/mach-mmp/Makefile.boot | 1 +
arch/arm/mach-mmp/clock.c | 83 +++++
arch/arm/mach-mmp/clock.h | 71 +++++
arch/arm/mach-mmp/common.c | 37 +++
arch/arm/mach-mmp/common.h | 9 +
arch/arm/mach-mmp/devices.c | 72 +++++
arch/arm/mach-mmp/include/mach/addr-map.h | 34 ++
arch/arm/mach-mmp/include/mach/clkdev.h | 7 +
arch/arm/mach-mmp/include/mach/cputype.h | 35 +++
arch/arm/mach-mmp/include/mach/debug-macro.S | 23 ++
arch/arm/mach-mmp/include/mach/devices.h | 31 ++
arch/arm/mach-mmp/include/mach/dma.h | 13 +
arch/arm/mach-mmp/include/mach/entry-macro.S | 25 ++
arch/arm/mach-mmp/include/mach/hardware.h | 4 +
arch/arm/mach-mmp/include/mach/io.h | 21 ++
arch/arm/mach-mmp/include/mach/irqs.h | 59 ++++
arch/arm/mach-mmp/include/mach/memory.h | 14 +
arch/arm/mach-mmp/include/mach/pxa168.h | 20 ++
arch/arm/mach-mmp/include/mach/regs-apbc.h | 53 ++++
arch/arm/mach-mmp/include/mach/regs-apmu.h | 36 +++
arch/arm/mach-mmp/include/mach/regs-icu.h | 31 ++
arch/arm/mach-mmp/include/mach/regs-timers.h | 44 +++
arch/arm/mach-mmp/include/mach/system.h | 21 ++
arch/arm/mach-mmp/include/mach/timex.h | 9 +
arch/arm/mach-mmp/include/mach/uncompress.h | 41 +++
arch/arm/mach-mmp/include/mach/vmalloc.h | 5 +
arch/arm/mach-mmp/irq.c | 58 ++++
arch/arm/mach-mmp/pxa168.c | 54 ++++
arch/arm/mach-mmp/time.c | 212 +++++++++++++
arch/arm/mach-mmp/zylonite2.c | 31 ++
arch/arm/mm/Kconfig | 15 +-
arch/arm/mm/Makefile | 1 +
arch/arm/mm/proc-mohawk.S | 421 ++++++++++++++++++++++++++
40 files changed, 1665 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-mmp/Kconfig
create mode 100644 arch/arm/mach-mmp/Makefile
create mode 100644 arch/arm/mach-mmp/Makefile.boot
create mode 100644 arch/arm/mach-mmp/clock.c
create mode 100644 arch/arm/mach-mmp/clock.h
create mode 100644 arch/arm/mach-mmp/common.c
create mode 100644 arch/arm/mach-mmp/common.h
create mode 100644 arch/arm/mach-mmp/devices.c
create mode 100644 arch/arm/mach-mmp/include/mach/addr-map.h
create mode 100644 arch/arm/mach-mmp/include/mach/clkdev.h
create mode 100644 arch/arm/mach-mmp/include/mach/cputype.h
create mode 100644 arch/arm/mach-mmp/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-mmp/include/mach/devices.h
create mode 100644 arch/arm/mach-mmp/include/mach/dma.h
create mode 100644 arch/arm/mach-mmp/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-mmp/include/mach/hardware.h
create mode 100644 arch/arm/mach-mmp/include/mach/io.h
create mode 100644 arch/arm/mach-mmp/include/mach/irqs.h
create mode 100644 arch/arm/mach-mmp/include/mach/memory.h
create mode 100644 arch/arm/mach-mmp/include/mach/pxa168.h
create mode 100644 arch/arm/mach-mmp/include/mach/regs-apbc.h
create mode 100644 arch/arm/mach-mmp/include/mach/regs-apmu.h
create mode 100644 arch/arm/mach-mmp/include/mach/regs-icu.h
create mode 100644 arch/arm/mach-mmp/include/mach/regs-timers.h
create mode 100644 arch/arm/mach-mmp/include/mach/system.h
create mode 100644 arch/arm/mach-mmp/include/mach/timex.h
create mode 100644 arch/arm/mach-mmp/include/mach/uncompress.h
create mode 100644 arch/arm/mach-mmp/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-mmp/irq.c
create mode 100644 arch/arm/mach-mmp/pxa168.c
create mode 100644 arch/arm/mach-mmp/time.c
create mode 100644 arch/arm/mach-mmp/zylonite2.c
create mode 100644 arch/arm/mm/proc-mohawk.S
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a268734..7eaf910 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -478,6 +478,8 @@ config ARCH_PXA
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@@ -485,6 +487,18 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+config ARCH_MMP
+ bool "Marvell PXA168"
+ depends on MMU
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168 processor line.
+
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
@@ -621,6 +635,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5f578a2..070154d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -105,6 +105,7 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
machine-$(CONFIG_ARCH_PXA) := pxa
+ machine-$(CONFIG_ARCH_MMP) := mmp
plat-$(CONFIG_PLAT_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 77d6142..4629dc8 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -630,6 +630,18 @@ proc_types:
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
+ .word 0x56158000
+ .word 0xff0ff000
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv5tej_mmu_cache_flush
+
+ .word 0x56056930
+ .word 0xff0ffff0 @ PXA935
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
+
.word 0x56050000 @ Feroceon
.word 0xff0f0000
b __armv4_mmu_cache_on
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 6cbd8fd..bfb0cb9 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -94,6 +94,14 @@
# endif
#endif
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE mohawk
+# endif
+#endif
+
#if defined(CONFIG_CPU_FEROCEON)
# define MULTI_CACHE 1
#endif
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index db80203..c625031 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -185,6 +185,14 @@
# define CPU_NAME cpu_xsc3
# endif
# endif
+# ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_mohawk
+# endif
+# endif
# ifdef CONFIG_CPU_FEROCEON
# ifdef CPU_NAME
# undef MULTI_CPU
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
new file mode 100644
index 0000000..9510534
--- /dev/null
+++ b/arch/arm/mach-mmp/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_MMP
+
+menu "Marvell PXA168 Implmentations"
+
+config MACH_ZYLONITE2
+ bool "Marvell's PXA168 Zylonite2 Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Zylonite2 Development Board.
+
+endmenu
+
+config CPU_PXA168
+ bool
+ select CPU_MOHAWK
+ help
+ Select code specific to PXA168
+
+endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
new file mode 100644
index 0000000..d5bf7dd
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for Marvell's PXA168 processors line
+#
+
+obj-y += common.o clock.o devices.o irq.o time.o
+
+# SoC support
+obj-$(CONFIG_CPU_PXA168) += pxa168.o
+
+# board support
+obj-$(CONFIG_MACH_ZYLONITE2) += zylonite2.o
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
new file mode 100644
index 0000000..574a4aa
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile.boot
@@ -0,0 +1 @@
+ zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
new file mode 100644
index 0000000..2d9cc5a
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/mach-mmp/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-apbc.h>
+#include "clock.h"
+
+static void apbc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void apbc_clk_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apbc_clk_ops = {
+ .enable = apbc_clk_enable,
+ .disable = apbc_clk_disable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ clk->ops->enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ clk->ops->disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ if (clk->ops->getrate)
+ rate = clk->ops->getrate(clk);
+ else
+ rate = clk->rate;
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
new file mode 100644
index 0000000..ed967e7
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.h
@@ -0,0 +1,71 @@
+/*
+ * linux/arch/arm/mach-mmp/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/clkdev.h>
+
+struct clkops {
+ void (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ unsigned long (*getrate)(struct clk *);
+};
+
+struct clk {
+ const struct clkops *ops;
+
+ void __iomem *clk_rst; /* clock reset control register */
+ int fnclksel; /* functional clock select (APBC) */
+ uint32_t enable_val; /* value for clock enable (APMU) */
+ unsigned long rate;
+ int enabled;
+};
+
+extern struct clkops apbc_clk_ops;
+
+#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APBC_##_reg, \
+ .fnclksel = _fnclksel, \
+ .rate = _rate, \
+ .ops = &apbc_clk_ops, \
+}
+
+#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APBC_##_reg, \
+ .fnclksel = _fnclksel, \
+ .rate = _rate, \
+ .ops = _ops, \
+}
+
+#define APMU_CLK(_name, _reg, _eval, _rate) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APMU_##_reg, \
+ .enable_val = _eval, \
+ .rate = _rate, \
+ .ops = &apmu_clk_ops, \
+}
+
+#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APMU_##_reg, \
+ .enable_val = _eval, \
+ .rate = _rate, \
+ .ops = _ops, \
+}
+
+#define INIT_CLKREG(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
+extern struct clk clk_pxa168_gpio;
+extern struct clk clk_pxa168_timers;
+
+extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
new file mode 100644
index 0000000..e1e66c1
--- /dev/null
+++ b/arch/arm/mach-mmp/common.c
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-mmp/common.c
+ *
+ * Code common to PXA168 processor lines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static struct map_desc standard_io_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(APB_PHYS_BASE),
+ .virtual = APB_VIRT_BASE,
+ .length = APB_PHYS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .pfn = __phys_to_pfn(AXI_PHYS_BASE),
+ .virtual = AXI_VIRT_BASE,
+ .length = AXI_PHYS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init pxa_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
new file mode 100644
index 0000000..a92cb1a
--- /dev/null
+++ b/arch/arm/mach-mmp/common.h
@@ -0,0 +1,9 @@
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+struct sys_timer;
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+
+extern void __init icu_init_irq(void);
+extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
new file mode 100644
index 0000000..e18d530
--- /dev/null
+++ b/arch/arm/mach-mmp/devices.c
@@ -0,0 +1,72 @@
+/*
+ * linux/arch/arm/mach-mmp/devices.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/devices.h>
+
+int __init pxa_register_device(struct pxa_device_desc *desc,
+ void *data, size_t size)
+{
+ struct platform_device *pdev;
+ struct resource res[2 + MAX_RESOURCE_DMA];
+ int i, ret = 0, nres = 0;
+
+ pdev = platform_device_alloc(desc->drv_name, desc->id);
+ if (pdev == NULL)
+ return -ENOMEM;
+
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ memset(res, 0, sizeof(res));
+
+ if (desc->start != -1ul && desc->size > 0) {
+ res[nres].start = desc->start;
+ res[nres].end = desc->start + desc->size - 1;
+ res[nres].flags = IORESOURCE_MEM;
+ nres++;
+ }
+
+ if (desc->irq != NO_IRQ) {
+ res[nres].start = desc->irq;
+ res[nres].end = desc->irq;
+ res[nres].flags = IORESOURCE_IRQ;
+ nres++;
+ }
+
+ for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
+ if (desc->dma[i] == 0)
+ break;
+
+ res[nres].start = desc->dma[i];
+ res[nres].end = desc->dma[i];
+ res[nres].flags = IORESOURCE_DMA;
+ }
+
+ ret = platform_device_add_resources(pdev, res, nres);
+ if (ret) {
+ platform_device_put(pdev);
+ return ret;
+ }
+
+ if (data && size) {
+ ret = platform_device_add_data(pdev, data, size);
+ if (ret) {
+ platform_device_put(pdev);
+ return ret;
+ }
+ }
+
+ return platform_device_add(pdev);
+}
+
+PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
+PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
new file mode 100644
index 0000000..3254089
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/addr-map.h
+ *
+ * Common address map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE 0xd4000000
+#define APB_VIRT_BASE 0xfe000000
+#define APB_PHYS_SIZE 0x00200000
+
+#define AXI_PHYS_BASE 0xd4200000
+#define AXI_VIRT_BASE 0xfe200000
+#define AXI_PHYS_SIZE 0x00200000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE 0x80000000
+#define SMC_CS0_PHYS_SIZE 0x10000000
+#define SMC_CS1_PHYS_BASE 0x90000000
+#define SMC_CS1_PHYS_SIZE 0x10000000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h
new file mode 100644
index 0000000..2fb354e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
new file mode 100644
index 0000000..f58490c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -0,0 +1,35 @@
+#ifndef __ASM_MACH_CPUTYPE_H
+#define __ASM_MACH_CPUTYPE_H
+
+#include <asm/cputype.h>
+
+/*
+ * CPU Stepping OLD_ID CPU_ID CHIP_ID
+ *
+ * PXA168 A0 0x41159263 0x56158400 0x00A0A333
+ */
+
+#ifndef CONFIG_CPU_MOHAWK_OLD_ID
+
+#ifdef CONFIG_CPU_PXA168
+# define __cpu_is_pxa168(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+#else
+# define __cpu_is_pxa168(id) (0)
+#endif
+
+#else
+
+#ifdef CONFIG_CPU_PXA168
+# define __cpu_is_pxa168(id) \
+ ({ unsigned int _id = (id) & 0xffff; _id == 0x9263; })
+#else
+# define __cpu_is_pxa168(id) (0)
+#endif
+
+#endif /* CONFIG_CPU_MOHAWK_OLD_ID */
+
+#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
+#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
+
+#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
new file mode 100644
index 0000000..a850f87
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-mmp/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copied from arch/arm/mach-pxa/include/mach/debug.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/addr-map.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =APB_PHYS_BASE @ physical
+ ldrne \rx, =APB_VIRT_BASE @ virtual
+ orr \rx, \rx, #0x00017000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
new file mode 100644
index 0000000..9b1ba00
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -0,0 +1,31 @@
+#include <linux/types.h>
+
+#define MAX_RESOURCE_DMA 2
+
+/* structure for describing the on-chip devices */
+struct pxa_device_desc {
+ const char *dev_name;
+ const char *drv_name;
+ int id;
+ int irq;
+ unsigned long start;
+ unsigned long size;
+ int dma[MAX_RESOURCE_DMA];
+};
+
+#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc pxa168_device_##_name __initdata = { \
+ .dev_name = "pxa168-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_PXA168_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+};
+
+extern struct pxa_device_desc pxa168_device_uart1;
+extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_uart3;
+
+extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
new file mode 100644
index 0000000..1d69145
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/dma.h
@@ -0,0 +1,13 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/dma.h
+ */
+
+#ifndef __ASM_MACH_DMA_H
+#define __ASM_MACH_DMA_H
+
+#include <mach/addr-map.h>
+
+#define DMAC_REGS_VIRT (APB_VIRT_BASE + 0x00000)
+
+#include <plat/dma.h>
+#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d3cd35
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-icu.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =ICU_AP_IRQ_SEL_INT_NUM
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \tmp, [\base, #0]
+ and \irqnr, \tmp, #0x3f
+ tst \tmp, #(1 << 6)
+ .endm
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
new file mode 100644
index 0000000..99264a5
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/hardware.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h
new file mode 100644
index 0000000..e7adf3d
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/io.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
new file mode 100644
index 0000000..fe1dc7b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+/*
+ * Interrupt numbers for PXA168
+ */
+#define IRQ_PXA168_NONE (-1)
+#define IRQ_PXA168_SSP3 0
+#define IRQ_PXA168_SSP2 1
+#define IRQ_PXA168_SSP1 2
+#define IRQ_PXA168_SSP0 3
+#define IRQ_PXA168_PMIC_INT 4
+#define IRQ_PXA168_RTC_INT 5
+#define IRQ_PXA168_RTC_ALARM 6
+#define IRQ_PXA168_TWSI 7
+#define IRQ_PXA168_GPU 8
+#define IRQ_PXA168_KEYPAD 9
+#define IRQ_PXA168_ONEWIRE 12
+#define IRQ_PXA168_TIMER1 13
+#define IRQ_PXA168_TIMER2 14
+#define IRQ_PXA168_TIMER3 15
+#define IRQ_PXA168_CMU 16
+#define IRQ_PXA168_SSP4 17
+#define IRQ_PXA168_MSP_WAKEUP 19
+#define IRQ_PXA168_CF_WAKEUP 20
+#define IRQ_PXA168_XD_WAKEUP 21
+#define IRQ_PXA168_MFU 22
+#define IRQ_PXA168_MSP 23
+#define IRQ_PXA168_CF 24
+#define IRQ_PXA168_XD 25
+#define IRQ_PXA168_DDR_INT 26
+#define IRQ_PXA168_UART1 27
+#define IRQ_PXA168_UART2 28
+#define IRQ_PXA168_UART3 29
+#define IRQ_PXA168_WDT 35
+#define IRQ_PXA168_FRQ_CHANGE 38
+#define IRQ_PXA168_MMC 39
+#define IRQ_PXA168_MMC2 40
+#define IRQ_PXA168_LCD 41
+#define IRQ_PXA168_CI 42
+#define IRQ_PXA168_USB1 44
+#define IRQ_PXA168_NAND 45
+#define IRQ_PXA168_HIFI_DMA 46
+#define IRQ_PXA168_DMA_INT0 47
+#define IRQ_PXA168_DMA_INT1 48
+#define IRQ_PXA168_GPIOX 49
+#define IRQ_PXA168_USB2 51
+#define IRQ_PXA168_AC97 57
+#define IRQ_PXA168_PWRI2C 58
+#define IRQ_PXA168_PMU 60
+#define IRQ_PXA168_SM_INT 63
+
+#define IRQ_GPIO_START 64
+#define IRQ_GPIO_NUM 128
+#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
+
+#define NR_IRQS (IRQ_GPIO_START + IRQ_GPIO_NUM)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
new file mode 100644
index 0000000..bdb21d7
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
new file mode 100644
index 0000000..71424be
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_MACH_PXA168_H
+#define __ASM_MACH_PXA168_H
+
+#include <mach/devices.h>
+
+static inline int pxa168_add_uart1(void)
+{
+ return pxa_register_device(&pxa168_device_uart1, NULL, 0);
+}
+
+static inline int pxa168_add_uart2(void)
+{
+ return pxa_register_device(&pxa168_device_uart2, NULL, 0);
+}
+
+static inline int pxa168_add_uart3(void)
+{
+ return pxa_register_device(&pxa168_device_uart3, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
new file mode 100644
index 0000000..64c063d
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
+ *
+ * Application Peripheral Bus Clock Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APBC_H
+#define __ASM_MACH_REGS_APBC_H
+
+#include <mach/addr-map.h>
+
+#define APBC_VIRT_BASE (APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x) (APBC_VIRT_BASE + (x))
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_PXA168_UART1 APBC_REG(0x000)
+#define APBC_PXA168_UART2 APBC_REG(0x004)
+#define APBC_PXA168_GPIO APBC_REG(0x008)
+#define APBC_PXA168_PWM0 APBC_REG(0x00c)
+#define APBC_PXA168_PWM1 APBC_REG(0x010)
+#define APBC_PXA168_SSP1 APBC_REG(0x01c)
+#define APBC_PXA168_SSP2 APBC_REG(0x020)
+#define APBC_PXA168_RTC APBC_REG(0x028)
+#define APBC_PXA168_TWSI APBC_REG(0x02c)
+#define APBC_PXA168_KPC APBC_REG(0x030)
+#define APBC_PXA168_TIMERS APBC_REG(0x034)
+#define APBC_PXA168_AIB APBC_REG(0x03c)
+#define APBC_PXA168_SW_JTAG APBC_REG(0x040)
+#define APBC_PXA168_ONEWIRE APBC_REG(0x048)
+#define APBC_PXA168_SSP3 APBC_REG(0x04c)
+#define APBC_PXA168_ASFAR APBC_REG(0x050)
+#define APBC_PXA168_ASSAR APBC_REG(0x054)
+#define APBC_PXA168_SSP4 APBC_REG(0x058)
+#define APBC_PXA168_SSP5 APBC_REG(0x05c)
+#define APBC_PXA168_PI2C APBC_REG(0x06c)
+#define APBC_PXA168_UART3 APBC_REG(0x070)
+#define APBC_PXA168_AC97 APBC_REG(0x084)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
+#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
+#define APBC_RST (1 << 2) /* Reset Generation */
+
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
+
+#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
new file mode 100644
index 0000000..9190305
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
+ *
+ * Application Subsystem Power Management Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APMU_H
+#define __ASM_MACH_REGS_APMU_H
+
+#include <mach/addr-map.h>
+
+#define APMU_VIRT_BASE (AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x) (APMU_VIRT_BASE + (x))
+
+/* Clock Reset Control */
+#define APMU_IRE APMU_REG(0x048)
+#define APMU_LCD APMU_REG(0x04c)
+#define APMU_CCIC APMU_REG(0x050)
+#define APMU_SDH0 APMU_REG(0x054)
+#define APMU_SDH1 APMU_REG(0x058)
+#define APMU_USB APMU_REG(0x05c)
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_DMA APMU_REG(0x064)
+#define APMU_GEU APMU_REG(0x068)
+#define APMU_BUS APMU_REG(0x06c)
+
+#define APMU_FNCLK_EN (1 << 4)
+#define APMU_AXICLK_EN (1 << 3)
+#define APMU_FNRST_DIS (1 << 1)
+#define APMU_AXIRST_DIS (1 << 0)
+
+#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
new file mode 100644
index 0000000..e5f0872
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
+ *
+ * Interrupt Control Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ICU_H
+#define __ASM_MACH_ICU_H
+
+#include <mach/addr-map.h>
+
+#define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000)
+#define ICU_REG(x) (ICU_VIRT_BASE + (x))
+
+#define ICU_INT_CONF(n) ICU_REG((n) << 2)
+#define ICU_INT_CONF_AP_INT (1 << 6)
+#define ICU_INT_CONF_CP_INT (1 << 5)
+#define ICU_INT_CONF_IRQ (1 << 4)
+#define ICU_INT_CONF_MASK (0xf)
+
+#define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108) /* AP FIQ Selected Interrupt */
+#define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C) /* AP IRQ Selected Interrupt */
+#define ICU_AP_GBL_IRQ_MSK ICU_REG(0x114) /* AP Global Interrupt Mask */
+#define ICU_INT_STATUS_0 ICU_REG(0x128) /* Interrupt Stuats 0 */
+#define ICU_INT_STATUS_1 ICU_REG(0x12C) /* Interrupt Status 1 */
+
+#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/include/mach/regs-timers.h
new file mode 100644
index 0000000..45589fe
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-timers.h
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
+ *
+ * Timers Module
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#include <mach/addr-map.h>
+
+#define TIMERS1_VIRT_BASE (APB_VIRT_BASE + 0x14000)
+#define TIMERS2_VIRT_BASE (APB_VIRT_BASE + 0x16000)
+
+#define TMR_CCR (0x0000)
+#define TMR_TN_MM(n, m) (0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n) (0x0028 + ((n) << 2))
+#define TMR_SR(n) (0x0034 + ((n) << 2))
+#define TMR_IER(n) (0x0040 + ((n) << 2))
+#define TMR_PLVR(n) (0x004c + ((n) << 2))
+#define TMR_PLCR(n) (0x0058 + ((n) << 2))
+#define TMR_WMER (0x0064)
+#define TMR_WMR (0x0068)
+#define TMR_WVR (0x006c)
+#define TMR_WSR (0x0070)
+#define TMR_ICR(n) (0x0074 + ((n) << 2))
+#define TMR_WICR (0x0080)
+#define TMR_CER (0x0084)
+#define TMR_CMR (0x0088)
+#define TMR_ILR(n) (0x008c + ((n) << 2))
+#define TMR_WCR (0x0098)
+#define TMR_WFAR (0x009c)
+#define TMR_WSAR (0x00A0)
+#define TMR_CVWR(n) (0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x) (((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x) (((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x) (((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
new file mode 100644
index 0000000..001edfe
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_SYSTEM_H
+#define __ASM_MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
new file mode 100644
index 0000000..6cebbd0
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE 3250000
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
new file mode 100644
index 0000000..c93d5fa
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-mmp/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/addr-map.h>
+
+#define UART1_BASE (APB_PHYS_BASE + 0x36000)
+#define UART2_BASE (APB_PHYS_BASE + 0x17000)
+#define UART3_BASE (APB_PHYS_BASE + 0x18000)
+
+static inline void putc(char c)
+{
+ volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
+ /* UART enabled? */
+ if (!(UART[UART_IER] & UART_IER_UUE))
+ return;
+
+ while (!(UART[UART_LSR] & UART_LSR_THRE))
+ barrier();
+
+ UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
new file mode 100644
index 0000000..b60ccaf
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 0000000..f6b93b1
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,58 @@
+/*
+ * linux/arch/arm/mach-mmp/irq.c
+ *
+ * Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ * Author: Bin Yang <bin.yang@xxxxxxxxxxx>
+ * Created: Sep 30, 2008
+ * Copyright: Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+#define PRIORITY_DEFAULT 0x1
+#define PRIORITY_NONE 0x0
+
+static void icu_mask_irq(unsigned int irq)
+{
+ uint32_t conf = __raw_readl(ICU_INT_CONF(irq)) & ~ICU_INT_CONF_MASK;
+
+ __raw_writel(conf | PRIORITY_NONE, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+ uint32_t conf = __raw_readl(ICU_INT_CONF(irq)) & ~ICU_INT_CONF_MASK;
+
+ __raw_writel(conf | PRIORITY_DEFAULT, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+ .name = "icu_irq",
+ .ack = icu_mask_irq,
+ .mask = icu_mask_irq,
+ .unmask = icu_unmask_irq,
+};
+
+void __init icu_init_irq(void)
+{
+ uint32_t conf = ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ;
+ int irq;
+
+ for (irq = 0; irq < 64; irq++) {
+ __raw_writel(conf, ICU_INT_CONF(irq));
+ set_irq_chip(irq, &icu_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
new file mode 100644
index 0000000..546db19
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-mmp/pxa168.c
+ *
+ * Code specific to PXA168
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include <mach/addr-map.h>
+#include <mach/cputype.h>
+#include <mach/regs-apbc.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+
+#include "common.h"
+#include "clock.h"
+
+void __init pxa168_init_irq(void)
+{
+ icu_init_irq();
+}
+
+/* clocks for external use */
+APBC_CLK(pxa168_gpio, PXA168_GPIO, 0, 0);
+APBC_CLK(pxa168_timers, PXA168_TIMERS, 3, 3250000);
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
+static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
+
+static struct clk_lookup pxa168_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+};
+
+static int __init pxa168_init(void)
+{
+ if (cpu_is_pxa168()) {
+ pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
+ clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(pxa168_init);
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
new file mode 100644
index 0000000..3d29b4b
--- /dev/null
+++ b/arch/arm/mach-mmp/time.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ * Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ * 2008-04-11: Jason Chagas <Jason.chagas@xxxxxxxxxxx>
+ * 2008-10-08: Bin Yang <bin.yang@xxxxxxxxxxx>
+ *
+ * The timers module actually includes three timers, each timer with upto
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/regs-timers.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+
+#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
+
+#define MAX_DELTA (0xfffffffe)
+#define MIN_DELTA (16)
+
+#define TCR2NS_SCALE_FACTOR 10
+
+static unsigned long tcr2ns_scale;
+
+static void __init set_tcr2ns_scale(unsigned long tcr_rate)
+{
+ unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
+ do_div(v, tcr_rate);
+ tcr2ns_scale = v;
+ /*
+ * We want an even value to automatically clear the top bit
+ * returned by cnt32_to_63() without an additional run time
+ * instruction. So if the LSB is 1 then round it up.
+ */
+ if (tcr2ns_scale & 1)
+ tcr2ns_scale++;
+}
+
+/*
+ * Note: the timer needs some delay to stablize the counter capture
+ */
+static inline uint32_t timer_read(void)
+{
+ int delay = 100;
+
+ __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+
+ while (delay--)
+ cpu_relax();
+
+ return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+}
+
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(timer_read());
+ return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* disable and clear pending interrupt status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+ __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+ c->event_handler(c);
+ return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ unsigned long flags, next;
+
+ local_irq_save(flags);
+
+ /* clear pending interrupt status and enable */
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+
+ next = timer_read() + delta;
+ __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* disable the matching interrupt */
+ __raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ }
+ local_irq_restore(flags);
+}
+
+static struct clock_event_device ckevt = {
+ .name = "clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .set_next_event = timer_set_next_event,
+ .set_mode = timer_set_mode,
+};
+
+static cycle_t clksrc_read(void)
+{
+ return timer_read();
+}
+
+static struct clocksource cksrc = {
+ .name = "clocksource",
+ .shift = 20,
+ .rating = 200,
+ .read = clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+ uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+ uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
+ uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
+
+ __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+
+ ccr &= TMR_CCR_CS_0(0x3);
+ __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+
+ /* free-running mode */
+ __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+
+ /* enable timer counter */
+ __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+}
+
+static struct irqaction timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = timer_interrupt,
+ .dev_id = &ckevt,
+};
+
+static void __init timer_init(int irq)
+{
+ timer_config();
+
+ set_tcr2ns_scale(CLOCK_TICK_RATE);
+
+ ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
+ ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
+ ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
+ ckevt.cpumask = cpumask_of(0);
+
+ cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
+
+ setup_irq(irq, &timer_irq);
+
+ clocksource_register(&cksrc);
+ clockevents_register_device(&ckevt);
+}
+
+static void __init pxa168_timer_init(void)
+{
+ clk_enable(&clk_pxa168_timers);
+
+ timer_init(IRQ_PXA168_TIMER1);
+}
+
+struct sys_timer pxa168_timer = {
+ .init = pxa168_timer_init,
+};
diff --git a/arch/arm/mach-mmp/zylonite2.c b/arch/arm/mach-mmp/zylonite2.c
new file mode 100644
index 0000000..82319b5
--- /dev/null
+++ b/arch/arm/mach-mmp/zylonite2.c
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-mmp/zylonite2.c
+ *
+ * Support for the Marvell PXA168-based Zylonite2 Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static void __init zylonite2_init(void)
+{
+}
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = zylonite2_init,
+MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f37..64086f4 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -340,6 +340,17 @@ config CPU_XSC3
select CPU_TLB_V4WBI if MMU
select IO_36
+# Marvell PJ1 (Mohawk)
+config CPU_MOHAWK
+ bool
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_PABRT_NOIFAR
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_TLB_V4WBI if MMU
+ select CPU_COPY_V4WB if MMU
+
# Feroceon
config CPU_FEROCEON
bool
@@ -569,7 +580,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
@@ -653,7 +664,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
+ depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
help
Say Y here to disable branch prediction. If unsure, say N.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a..64149d9 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_CPU_SA110) += proc-sa110.o
obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
+obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
new file mode 100644
index 0000000..719659a
--- /dev/null
+++ b/arch/arm/mm/proc-mohawk.S
@@ -0,0 +1,421 @@
+/*
+ * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
+ *
+ * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
+ *
+ * Heavily based on proc-arm926.S and proc-xsc3.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed. If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define CACHE_DLIMIT 32768
+
+/*
+ * The cache line size of the L1 D cache.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * cpu_mohawk_proc_init()
+ */
+ENTRY(cpu_mohawk_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_mohawk_proc_fin()
+ */
+ENTRY(cpu_mohawk_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl mohawk_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1800 @ ...iz...........
+ bic r0, r0, #0x0006 @ .............ca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_mohawk_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * (same as arm926)
+ */
+ .align 5
+ENTRY(cpu_mohawk_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x0007 @ .............cam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_mohawk_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 5
+ENTRY(cpu_mohawk_do_idle)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(mohawk_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(mohawk_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(mohawk_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(mohawk_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(mohawk_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(mohawk_cache_fns)
+ .long mohawk_flush_kern_cache_all
+ .long mohawk_flush_user_cache_all
+ .long mohawk_flush_user_cache_range
+ .long mohawk_coherent_kern_range
+ .long mohawk_coherent_user_range
+ .long mohawk_flush_kern_dcache_page
+ .long mohawk_dma_inv_range
+ .long mohawk_dma_clean_range
+ .long mohawk_dma_flush_range
+
+ENTRY(cpu_mohawk_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * cpu_mohawk_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_mohawk_switch_mm)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ orr r0, r0, #0x18 @ cache the page table in L2
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_mohawk_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_mohawk_set_pte_ext)
+ armv3_set_pte_ext
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __mohawk_setup, #function
+__mohawk_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
+ orr r4, r4, #0x18 @ cache the page table in L2
+ mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+
+ mov r0, #0 @ don't allow CP access
+ mcr p15, 0, r0, c15, c1, 0 @ write CP access register
+
+ adr r5, mohawk_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register
+ bic r0, r0, r5
+ orr r0, r0, r6
+ mov pc, lr
+
+ .size __mohawk_setup, . - __mohawk_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..00 0101
+ *
+ */
+ .type mohawk_crval, #object
+mohawk_crval:
+ crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type mohawk_processor_functions, #object
+mohawk_processor_functions:
+ .word v5t_early_abort
+ .word pabort_noifar
+ .word cpu_mohawk_proc_init
+ .word cpu_mohawk_proc_fin
+ .word cpu_mohawk_reset
+ .word cpu_mohawk_do_idle
+ .word cpu_mohawk_dcache_clean_area
+ .word cpu_mohawk_switch_mm
+ .word cpu_mohawk_set_pte_ext
+ .size mohawk_processor_functions, . - mohawk_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_mohawk_name, #object
+cpu_mohawk_name:
+ .asciz "Marvell 88SV331x"
+ .size cpu_mohawk_name, . - cpu_mohawk_name
+
+ .type cpu_pxa168_name, #object
+cpu_pxa168_name:
+ .asciz "Marvell PXA168"
+ .size cpu_pxa168_name, . - cpu_pxa168_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __pxa168_proc_info,#object
+__pxa168_proc_info:
+ .long 0x56158400 @ Marvell PXA168
+ .long 0xff0fff00
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __mohawk_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pxa168_name
+ .long mohawk_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long mohawk_cache_fns
+ .size __pxa168_proc_info, . - __pxa168_proc_info
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/