[GIT PULL] ALSA fixes for 2.6.29-rc5
From: Takashi Iwai
Date: Thu Feb 19 2009 - 10:22:43 EST
Linus,
please pull ALSA fixes for v2.6.29-rc5 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
All small fixes, including two reverts for regressions.
Thanks!
Takashi
===
Clemens Ladisch (2):
sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces
sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
Joris van Rantwijk (1):
ALSA: usb-audio - Workaround for misdetected sample rate with CM6207
Takashi Iwai (3):
Revert "Sound: hda - Restore PCI configuration space with interrupts off"
ALSA: usb-audio - Fix non-continuous rate detection
ALSA: jack - Use card->shortname for input name
---
sound/core/jack.c | 2 +-
sound/pci/hda/hda_intel.c | 8 ++------
sound/pci/oxygen/virtuoso.c | 17 ++++-------------
sound/usb/usbaudio.c | 20 +++++++++++---------
sound/usb/usbmidi.c | 1 +
5 files changed, 19 insertions(+), 29 deletions(-)
diff --git a/sound/core/jack.c b/sound/core/jack.c
index dd4a12d..077a852 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -47,7 +47,7 @@ static int snd_jack_dev_register(struct snd_device *device)
int err;
snprintf(jack->name, sizeof(jack->name), "%s %s",
- card->longname, jack->id);
+ card->shortname, jack->id);
jack->input_dev->name = jack->name;
/* Default to the sound card device. */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 11e791b..c8d9178 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1947,16 +1947,13 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state)
return 0;
}
-static int azx_resume_early(struct pci_dev *pci)
-{
- return pci_restore_state(pci);
-}
-
static int azx_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
printk(KERN_ERR "hda-intel: pci_enable_device failed, "
"disabling device\n");
@@ -2468,7 +2465,6 @@ static struct pci_driver driver = {
.remove = __devexit_p(azx_remove),
#ifdef CONFIG_PM
.suspend = azx_suspend,
- .resume_early = azx_resume_early,
.resume = azx_resume,
#endif
};
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 18c7c91..6c870c1 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -26,7 +26,7 @@
* SPI 0 -> 1st PCM1796 (front)
* SPI 1 -> 2nd PCM1796 (surround)
* SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
+ * SPI 4 -> 4th PCM1796 (back)
*
* GPIO 2 -> M0 of CS5381
* GPIO 3 -> M1 of CS5381
@@ -207,12 +207,6 @@ static void xonar_gpio_changed(struct oxygen *chip);
static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
u8 reg, u8 value)
{
- /*
- * We don't want to do writes on SPI 4 because the EEPROM, which shares
- * the same pin, might get confused and broken. We'd better take care
- * that the driver works with the default register values ...
- */
-#if 0
/* maps ALSA channel pair number to SPI output */
static const u8 codec_map[4] = {
0, 1, 2, 4
@@ -223,7 +217,6 @@ static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
(codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
(reg << 8) | value);
-#endif
}
static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -757,9 +750,6 @@ static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -12700, 100, 0);
static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
{
- if (!strncmp(template->name, "Master Playback ", 16))
- /* disable volume/mute because they would require SPI writes */
- return 1;
if (!strncmp(template->name, "CD Capture ", 11))
/* CD in is actually connected to the video in pin */
template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -850,8 +840,9 @@ static const struct oxygen_model model_xonar_d2 = {
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
.misc_flags = OXYGEN_MISC_MIDI,
- .function_flags = OXYGEN_FUNCTION_SPI,
- .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
+ .function_flags = OXYGEN_FUNCTION_SPI |
+ OXYGEN_FUNCTION_ENABLE_SPI_4_5,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
};
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 2ab8312..19e3745 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2524,7 +2524,6 @@ static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioform
* build the rate table and bitmap flags
*/
int r, idx;
- unsigned int nonzero_rates = 0;
fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
if (fp->rate_table == NULL) {
@@ -2532,24 +2531,27 @@ static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioform
return -1;
}
- fp->nr_rates = nr_rates;
- fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
+ fp->nr_rates = 0;
+ fp->rate_min = fp->rate_max = 0;
for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
unsigned int rate = combine_triple(&fmt[idx]);
+ if (!rate)
+ continue;
/* C-Media CM6501 mislabels its 96 kHz altsetting */
if (rate == 48000 && nr_rates == 1 &&
- chip->usb_id == USB_ID(0x0d8c, 0x0201) &&
+ (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
+ chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
- fp->rate_table[r] = rate;
- nonzero_rates |= rate;
- if (rate < fp->rate_min)
+ fp->rate_table[fp->nr_rates] = rate;
+ if (!fp->rate_min || rate < fp->rate_min)
fp->rate_min = rate;
- else if (rate > fp->rate_max)
+ if (!fp->rate_max || rate > fp->rate_max)
fp->rate_max = rate;
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+ fp->nr_rates++;
}
- if (!nonzero_rates) {
+ if (!fp->nr_rates) {
hwc_debug("All rates were zero. Skipping format!\n");
return -1;
}
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 320641a..26bad37 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1625,6 +1625,7 @@ static int snd_usbmidi_create_endpoints_midiman(struct snd_usb_midi* umidi,
}
ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ ep_info.out_interval = 0;
ep_info.out_cables = endpoint->out_cables & 0x5555;
err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
if (err < 0)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/