Re: [RFC][PATCH 2/2] PM: Rework handling of interrupts during suspend-resume

From: Arve Hjønnevåg
Date: Mon Feb 23 2009 - 17:44:30 EST


On Mon, Feb 23, 2009 at 2:23 PM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> On Monday 23 February 2009, Arve Hjønnevåg wrote:
>> On Sun, Feb 22, 2009 at 9:39 AM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
>> > From: Rafael J. Wysocki <rjw@xxxxxxx>
>> >
>> > Introduce two helper functions allowing us to disable device
>> > interrupts (at the IO-APIC level) during suspend or hibernation
>> > and enable them during the subsequent resume, respectively, so that
>> > the timer interrupts are enabled while "late" suspend callbacks and
>> > "early" resume callbacks provided by device drivers are being
>> > executed.
>> >
>> > Use these functions to rework the handling of interrupts during
>> > suspend (hibernation) and resume. Namely, interrupts will only be
>> > disabled on the CPU right before suspending sysdevs, while device
>> > interrupts will be disabled (at the IO-APIC level), with the help of
>> > the new helper function, before calling "late" suspend callbacks
>> > provided by device drivers and analogously during resume.
>> >
>>
>> What impact does this have on wakeup interrupts? Unless you add a
>> check, after masking all interrupt at the CPU, to abort suspend if any
>> wakeup interrupt has IRQ_PENDING set I think you will loose wakeup
>> interrupts (at least for irqs that use default_disable).
>
> I _think_ they would have to be reenabled after we've called
> local_irq_disable().

Are you talking about the irq_chip switching from enabled interrupts
to wake interrupts? It is not enough for the irq_chip to reenable the
hardware interrupt. If the interrupt is edge triggered and occurred
after you disabled it, but before local_irq_disable, the only record
of it is the IRQ_PENDING flag.

--
Arve Hjønnevåg
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/