Re: Lava dual parallel PCI card IRQ problem

[Meelis Roos]

> You may need to stick a few printks in the port registration path to see
> why it made that decision.

Got it - it's a simple copypaste mistake:

+               irq = dev->irq;
+               if (irq == IRQ_NONE) {
+                       printk (KERN_DEBUG
+       "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
+                               parport_pc_pci_tbl[i + last_sio].vendor,
+                               parport_pc_pci_tbl[i + last_sio].device,
+                               io_lo, io_hi);
+                       irq = PARPORT_IRQ_NONE;
+               } else {
+                       printk (KERN_DEBUG
+       "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
+                               parport_pc_pci_tbl[i + last_sio].vendor,
+                               parport_pc_pci_tbl[i + last_sio].device,
+                               io_lo, io_hi, irq);
+                       irq = PARPORT_IRQ_NONE;
+               }

If I remove the second "irq = PARPORT_IRQ_NONE;" it starts to load fine. 
Will test later with a rela printer attached.

-- 
Meelis Roos (mroos@xxxxxxxx)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/