Re: [PATCH v4 07/12] PCI: Introduce /sys/bus/pci/rescan

[Alex Chiang]

* Trent Piepho <xyzzy@xxxxxxxxxxxxx>:
> On Thu, 19 Mar 2009, Alex Chiang wrote:
> > * Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>:
> > > > + +struct bus_attribute pci_bus_attrs[] = { +
> > > > __ATTR(rescan, S_IWUSR, NULL, bus_rescan_store), +
> > > > __ATTR_NULL +}; +#endif
> > >
> > > Why CONFIG_HOTPLUG rather than CONFIG_HOTPLUG_PCI (or
> > > similar)?
> >
> > I first started out with CONFIG_HOTPLUG_PCI but then all that
> > stuff got compiled out, and I couldn't figure out why at the
> > time.
>
> HOTPLUG_PCI is a subset of HOTPLUG.  It gives you support for
> actual hotplug hardware.  The rescan/remove functions don't do
> anything to hotplug hardware and don't use any code from the
> pci hotplug core (which is designed to support hotplug
> hardware).  Rescan and remove just need the ability to unbind a
> driver from device, delete a device and create a new device.
> Which HOTPLUG gives us.
> 
> So, we use HOTPLUG because that's all we need.  The idea is to
> make the sysfs interface for PCI have the most features it can
> support.
> 
> If we wanted to make the interface not have remove/rescan
> unless needed, then using HOTPLUG_PCI wouldn't make much sense.
> It would be better to have a new option "PCI remove/rescan
> sysfs interface" or something that turned it on.  But it isn't
> much code, so I don't think it's necessary to do that.
 
Well, I don't know what I did wrong last time, but I no longer
have technical difficulty putting it under CONFIG_HOTPLUG_PCI.

Looking at Documentation/PCI/pci.txt, and the various archs, it
seems they all assume CONFIG_HOTPLUG means PCI.

This could be cleaned up, but it's certainly non-trivial, and a
bit more than I'd want to bite off for this particular patchset.

Plus, Trent is right. Looks like we use HOTPLUG_PCI to really
mean physically supported hotplug, not the logical stuff that
this patchset is adding.

Thanks.

/ac

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/