Re: [PATCH 0/5] [GIT PULL] updates for tip/tracing/ftrace

[Frederic Weisbecker]

On Sat, Mar 21, 2009 at 05:58:04PM +0100, Ingo Molnar wrote:
> 
> * Ingo Molnar <mingo@xxxxxxx> wrote:
> 
> > 
> > * Steven Rostedt <rostedt@xxxxxxxxxxx> wrote:
> > 
> > > 
> > > On Fri, 20 Mar 2009, Frederic Weisbecker wrote:
> > > > > >  
> > > > > >  	VERBOSE_PRINTK_STRING("rcu_torture_reader task started");
> > > > > > -	set_user_nice(current, 19);
> > > > > > +	set_user_nice(current, -1);
> > > > > >  	if (irqreader && cur_ops->irqcapable)
> > > > > >  		setup_timer_on_stack(&t, rcu_torture_timer, 0);
> > > > > 
> > > > > i dont have a reproducer right now. Can you trigger it with latest 
> > > > > -tip, which has this commit included:
> > > > > 
> > > > > 04cb9ac: rcu: rcu_barrier VS cpu_hotplug: Ensure callbacks in dead cpu are migrated to o
> > > > > 
> > > > > ?
> > > > > 
> > > > > 	Ingo
> > > > 
> > > > 
> > > > I tested three times the same things but with 04cb9ac and... it didn't triggered
> > > > anymore :-)
> > > 
> > > So lets hope that was the culprit.
> > > 
> > > Great work Frederic!
> > 
> > No new lockups of this nature in overnight -tip testing. It's 
> > still a bit too early to tell for sure but it's promising ;-)
> 
> just got a lockup again :-/ It hangs here:
> 
> calling  init_mmio_trace+0x0/0x12 @ 1
> initcall init_mmio_trace+0x0/0x12 returned 0 after 0 usecs
> calling  init_graph_trace+0x0/0x12 @ 1
> Testing tracer function_graph: 
> 
> and this time i got good stackdumps as well - see below. Config 
> attached.
> 
> 	Ingo
> 
> Testing tracer sched_switch: PASSED
> initcall init_sched_switch_trace+0x0/0x12 returned 0 after 99609 usecs
> calling  init_stack_trace+0x0/0x12 @ 1
> Testing tracer sysprof: .. no entries found ..FAILED!
> initcall init_stack_trace+0x0/0x12 returned -1 after 101562 usecs
> initcall init_stack_trace+0x0/0x12 returned with error code -1 
> calling  init_function_trace+0x0/0x12 @ 1
> Testing tracer function: PASSED
> initcall init_function_trace+0x0/0x12 returned 0 after 104492 usecs
> calling  init_irqsoff_tracer+0x0/0x2c @ 1
> Testing tracer irqsoff: .. no entries found ..FAILED!
> Testing tracer preemptoff: .. no entries found ..FAILED!
> Testing tracer preemptirqsoff: .. no entries found ..FAILED!


It's strange that the {*}_off tracers have failed.


> initcall init_irqsoff_tracer+0x0/0x2c returned 0 after 8789 usecs
> calling  init_wakeup_tracer+0x0/0x58 @ 1
> Testing tracer wakeup: .. no entries found ..FAILED!


This one too. (sysprof doesn't count, it fails for some weeks, I think
it's not a hard deal to fix).


> initcall init_wakeup_tracer+0x0/0x58 returned -1 after 298828 usecs
> initcall init_wakeup_tracer+0x0/0x58 returned with error code -1 
> calling  stack_trace_init+0x0/0xc7 @ 1
> initcall stack_trace_init+0x0/0xc7 returned 0 after 0 usecs
> calling  init_mmio_trace+0x0/0x12 @ 1
> initcall init_mmio_trace+0x0/0x12 returned 0 after 0 usecs
> calling  init_graph_trace+0x0/0x12 @ 1
> Testing tracer function_graph: <3>INFO: RCU detected CPU 0 stall (t=4294678940/10000 jiffies)
> Pid: 1, comm: swapper Not tainted 2.6.29-rc8-tip-02752-g47b1aea-dirty #3264
> Call Trace:
>  <IRQ>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff80211150>] print_context_stack+0xa0/0xd3
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff8020fb26>] dump_trace+0x22d/0x2cc
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff80211008>] show_trace_log_lvl+0x51/0x5d
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff80211029>] show_trace+0x15/0x17
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff802111fa>] dump_stack+0x77/0x81
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff8029e6dd>] print_cpu_stall+0x40/0xa4
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff8029e8be>] check_cpu_stall+0x49/0x76
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff8029e902>] __rcu_pending+0x17/0xfc
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff8029ea13>] rcu_pending+0x2c/0x5e
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff8026abef>] update_process_times+0x3c/0x77
>  [<ffffffff8020c79d>] return_to_handler+0x0/0x73
>  [<ffffffff802875dd>] tick_periodic+0x6e/0x70


Still hanging in the timer interrupt.
I guess it makes the timer interrupt servicing too slow and then
once it is serviced, another one is raised.

But the cause is perhaps more complex

I think you have had too much hanging of this type.
I'm preparing a fix that checks periodically if the function graph
tracer is spending too much time in an interrupt.

I guess I could count the number of function executed between the irq entry
and its exit.

That's the best: if we are hanging in an interrupt, it could be whatever
interrupt and the jiffies could not be progressing so I can't rely
on time but only on number of functions executed.

May be 10000 calls is a good threshold before killing the function graph
inside an interrupt?

Let's try, I will also provide a way to dump the function graph traces from
the ring-buffer on the screen, it could help to debug it in this case.

Thanks,
Frederic.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/