df -h shows ~10 times bigger size when umounting pendrive

From: Arkadiusz Miskiewicz
Date: Sat Mar 21 2009 - 20:50:38 EST



I have 1GiB pendrive:

[ 1494.641661] scsi 4:0:0:0: Direct-Access GOODDRIVE 1100
PQ: 0 ANSI: 0 CCS
[ 1494.643482] sd 4:0:0:0: [sdb] 1957888 512-byte hardware sectors: (1.00
GB/956 MiB)
[ 1494.644599] sd 4:0:0:0: [sdb] Write Protect is off
[ 1494.644604] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1494.644609] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1494.647107] sd 4:0:0:0: [sdb] 1957888 512-byte hardware sectors: (1.00
GB/956 MiB)
[ 1494.648224] sd 4:0:0:0: [sdb] Write Protect is off
[ 1494.648230] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1494.648234] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1494.648241] sdb: sdb1
[ 1494.657345] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1494.657564] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1494.658212] usb-storage: device scan complete

pendrive was mounted on /media/floppy

[arekm@t400 ~]$ df -h
System plikïw rozm. uïyte dost. %uï. zamont. na
/dev/sda3 9,6G 4,2G 5,5G 44% /
/dev/mapper/home 127G 52G 75G 42% /home
tmpfs 1,0G 28K 1,0G 1% /tmp
none 2,0G 12K 2,0G 1% /dev/shm
/dev/sdb1 956M 657M 299M 69% /media/floppy

then I copied 650MB file and run umount /media/floppy

While umount was running and data were synced on the
pendrive df -h showed:

[arekm@t400 ~]$ df -h
System plikïw rozm. uïyte dost. %uï. zamont. na
/dev/sda3 9,6G 4,2G 5,5G 44% /
/dev/mapper/home 127G 52G 75G 42% /home
tmpfs 1,0G 28K 1,0G 1% /tmp
none 2,0G 12K 2,0G 1% /dev/shm
/dev/sdb1 9,6G 4,2G 5,5G 44% /media/floppy


So it started to show 9.6G size when in process of umount.

Doesn't sound "normal" and correct.

[arekm@t400 ~]$ uname -a
Linux t400 2.6.29-rc8 #105 SMP Sun Mar 22 00:47:52 CET 2009 x86_64
Intel(R)_Core(TM)2_Duo_CPU_____T9400__@xxxxxxxx PLD Linux

(actually from git from about 1 hour ago)
--
Arkadiusz MiÅkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/