[PATCH 1/3] spi_mpc83xx: Handles other Freescale processors

[Anton Vorontsov]

With this patch we'll able to select spi_mpc83xx driver on the MPC86xx
platforms. Let the driver depend on FSL_SOC, so we don't have to worry
about Kconfig anymore.

Also remove the "experimental" dependency, the driver has been tested
to work on a various hardware, and surely not experimental anymore.

Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
---
 drivers/spi/Kconfig |   14 ++++++--------
 1 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d..3c1845c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -140,16 +140,14 @@ config SPI_MPC52xx_PSC
 	  Controller in master SPI mode.
 
 config SPI_MPC83xx
-	tristate "Freescale MPC83xx/QUICC Engine SPI controller"
-	depends on (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
+	tristate "Freescale MPC8xxx SPI controller"
+	depends on FSL_SOC
 	help
-	  This enables using the Freescale MPC83xx and QUICC Engine SPI
-	  controllers in master mode.
+	  This enables using the Freescale MPC8xxx SPI controllers in master
+	  mode.
 
-	  Note, this driver uniquely supports the SPI controller on the MPC83xx
-	  family of PowerPC processors, plus processors with QUICC Engine
-	  technology. This driver uses a simple set of shift registers for data
-	  (opposed to the CPM based descriptor model).
+	  This driver uses a simple set of shift registers for data (opposed
+	  to the CPM based descriptor model).
 
 config SPI_OMAP_UWIRE
 	tristate "OMAP1 MicroWire"
-- 
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/