Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controllerquestion)
From: Theodore Tso
Date: Thu Apr 30 2009 - 22:52:11 EST
On Thu, Apr 30, 2009 at 07:51:28PM -0600, Robert Hancock wrote:
>> Thinking about this a bit more, I'll bet the problem is the BIOS
>> setting is only affecting the primary SATA ports (which are being
>> grabed by ahci) and not the SATA port in the Ultrabay slot (which is
>> being picked up by either the ata_piix or piix driver). Sigh...
>
> dmesg and lspci -vv output might be useful..
Here you go...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.30-rc3-00369-ga774073 (root@closure) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #27 SMP Sun Apr 26 23:54:09 EDT 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
[ 0.000000] RAMDISK: 378b6000 - 37feff74
[ 0.000000] Allocated new RAMDISK: 00db1000 - 014eaf74
[ 0.000000] Move RAMDISK from 00000000378b6000 - 0000000037feff73 to 00db1000 - 014eaf73
[ 0.000000] ACPI: RSDP 000f6950 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bf6bd368 00094 (v01 LENOVO TP-7N 00002190 LTP 00000000)
[ 0.000000] ACPI: FACP bf6bd500 000F4 (v03 LENOVO TP-7N 00002190 LNVO 00000001)
[ 0.000000] ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320]
[ 0.000000] ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320]
[ 0.000000] ACPI: DSDT bf6bd8db 0E32A (v01 LENOVO TP-7N 00002190 MSFT 03000000)
[ 0.000000] ACPI: FACS bf6e4000 00040
[ 0.000000] ACPI: SSDT bf6bd6b4 00227 (v01 LENOVO TP-7N 00002190 MSFT 03000000)
[ 0.000000] ACPI: ECDT bf6cbc05 00052 (v01 LENOVO TP-7N 00002190 LNVO 00000001)
[ 0.000000] ACPI: TCPA bf6cbc57 00032 (v02 LENOVO TP-7N 00002190 LNVO 00000001)
[ 0.000000] ACPI: APIC bf6cbc89 00068 (v01 LENOVO TP-7N 00002190 LNVO 00000001)
[ 0.000000] ACPI: MCFG bf6cbcf1 0003C (v01 LENOVO TP-7N 00002190 LNVO 00000001)
[ 0.000000] ACPI: HPET bf6cbd2d 00038 (v01 LENOVO TP-7N 00002190 LNVO 00000001)
[ 0.000000] ACPI: SLIC bf6cbdf0 00176 (v01 LENOVO TP-7N 00002190 LTP 00000000)
[ 0.000000] ACPI: BOOT bf6cbf66 00028 (v01 LENOVO TP-7N 00002190 LTP 00000001)
[ 0.000000] ACPI: ASF! bf6cbf8e 00072 (v16 LENOVO TP-7N 00002190 PTL 00000001)
[ 0.000000] ACPI: SSDT bf6e2697 0025F (v01 LENOVO TP-7N 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT bf6e28f6 000A6 (v01 LENOVO TP-7N 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT bf6e299c 004F7 (v01 LENOVO TP-7N 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT bf6e2e93 001D8 (v01 LENOVO TP-7N 00002190 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X61
[ 0.000000] ACPI: Added _OSI(Linux)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4166MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00009000 - 0000ff40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000da6dcc] TEXT DATA BSS ==> [0000100000 - 0000da6dcc]
[ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
[ 0.000000] #5 [0000da7000 - 0000db0138] BRK ==> [0000da7000 - 0000db0138]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000db1000 - 00014eaf74] NEW RAMDISK ==> [0000db1000 - 00014eaf74]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f6980] f6980
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bf6b0
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1029709
[ 0.000000] free_area_init_node: node 0, pgdat c0713bc0, node_mem_map c14eb000
[ 0.000000] DMA zone: 60 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3937 pages, LIFO batch:0
[ 0.000000] Normal zone: 3278 pages used for memmap
[ 0.000000] Normal zone: 220464 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15623 pages used for memmap
[ 0.000000] HighMem zone: 786347 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 334 pages at c5f33000, static data 1346460 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1010748
[ 0.000000] Kernel command line: root=/dev/mapper/ssd-root rootfstype=ext4 ro thinkpad_acpi.brightness_enable=1 quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] CPU 0 irqstacks, hard=c5f33000 soft=c5f34000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.841 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 3103 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Initializing HighMem for node 0 (000379fe:0013c000)
[ 0.003333] Memory: 4018088k/5177344k available (4048k kernel code, 99964k reserved, 2251k data, 1660k init, 3207880k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 0.003333] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.003333] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.003333] .init : 0xc072d000 - 0xc08cc000 (1660 kB)
[ 0.003333] .data : 0xc04f411d - 0xc0726ff0 (2251 kB)
[ 0.003333] .text : 0xc0100000 - 0xc04f411d (4048 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.66 BogoMIPS (lpj=5319470)
[ 0.003333] Security Framework initialized
[ 0.003333] SELinux: Disabled at boot.
[ 0.003333] Mount-cache hash table entries: 512
[ 0.003333] Initializing cgroup subsys debug
[ 0.003333] Initializing cgroup subsys ns
[ 0.003333] Initializing cgroup subsys cpuacct
[ 0.003333] Initializing cgroup subsys devices
[ 0.003333] Initializing cgroup subsys freezer
[ 0.003333] Initializing cgroup subsys net_cls
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 4096K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#0.
[ 0.003333] using mwait in idle threads.
[ 0.003333] Checking 'hlt' instruction... OK.
[ 0.016543] ACPI: Core revision 20090320
[ 0.086699] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.086714] ftrace: allocating 20570 entries in 41 pages
[ 0.093788] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.126813] CPU0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b
[ 0.129999] lockdep: fixing up alternatives.
[ 0.129999] CPU 1 irqstacks, hard=c6081000 soft=c6082000
[ 0.129999] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 3193.95 BogoMIPS (lpj=5319934)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 4096K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#1.
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.226619] CPU1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b
[ 0.226648] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.226666] Measured 882784 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.226666] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.226778] Brought up 2 CPUs
[ 0.226786] Total of 2 processors activated (6386.62 BogoMIPS).
[ 0.227002] CPU0 attaching sched-domain:
[ 0.227010] domain 0: span 0-1 level MC
[ 0.227018] groups: 0 1
[ 0.227067] CPU1 attaching sched-domain:
[ 0.227074] domain 0: span 0-1 level MC
[ 0.227081] groups: 1 0
[ 0.227498] khelper used greatest stack depth: 2804 bytes left
[ 0.227626] net_namespace: 1264 bytes
[ 0.230236] Booting paravirtualized kernel on bare hardware
[ 0.230728] regulator: core version 0.5
[ 0.230728] NET: Registered protocol family 16
[ 0.233621] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.233668] ACPI: bus type pci registered
[ 0.233724] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.233724] PCI: MCFG area at f0000000 reserved in E820
[ 0.233724] PCI: Using MMCONFIG for extended config space
[ 0.233724] PCI: Using configuration type 1 for base access
[ 0.260318] bio: create slab <bio-0> at 0
[ 0.280223] ACPI: EC: EC description table is found, configuring boot EC
[ 0.320473] ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.323421] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.353763] ACPI: Interpreter enabled
[ 0.353775] ACPI: (supports S0 S3 S4 S5)
[ 0.353936] ACPI: Using IOAPIC for interrupt routing
[ 0.413636] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.413644] ACPI: EC: driver started in interrupt mode
[ 0.413795] ACPI: Power Resource [PUBS] (on)
[ 0.426165] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.427619] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.427887] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf80fffff]
[ 0.427887] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
[ 0.427887] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.427887] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
[ 0.428024] pci 0000:00:19.0: reg 10 32bit mmio: [0xf8200000-0xf821ffff]
[ 0.428057] pci 0000:00:19.0: reg 14 32bit mmio: [0xf8225000-0xf8225fff]
[ 0.428089] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[ 0.428307] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.428326] pci 0000:00:19.0: PME# disabled
[ 0.428548] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[ 0.430189] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[ 0.430458] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8426c00-0xf8426fff]
[ 0.430701] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.430720] pci 0000:00:1a.7: PME# disabled
[ 0.430934] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8220000-0xf8223fff]
[ 0.431195] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.431213] pci 0000:00:1b.0: PME# disabled
[ 0.431571] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.431590] pci 0000:00:1c.0: PME# disabled
[ 0.431959] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.431977] pci 0000:00:1c.1: PME# disabled
[ 0.432271] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
[ 0.432547] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
[ 0.432852] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8427000-0xf84273ff]
[ 0.433118] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.433137] pci 0000:00:1d.7: PME# disabled
[ 0.433818] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.433835] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.433849] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.433863] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.433877] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.434079] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.434111] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.434142] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.434173] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.434205] pci 0000:00:1f.1: reg 20 io port: [0x18e0-0x18ef]
[ 0.434514] pci 0000:00:1f.2: reg 10 io port: [0x1c30-0x1c37]
[ 0.434546] pci 0000:00:1f.2: reg 14 io port: [0x1c24-0x1c27]
[ 0.434578] pci 0000:00:1f.2: reg 18 io port: [0x1c28-0x1c2f]
[ 0.434610] pci 0000:00:1f.2: reg 1c io port: [0x1c20-0x1c23]
[ 0.434641] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f]
[ 0.434673] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8426000-0xf84267ff]
[ 0.434853] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.434871] pci 0000:00:1f.2: PME# disabled
[ 0.435007] pci 0000:00:1f.3: reg 10 32bit mmio: [0xf8427400-0xf84274ff]
[ 0.435112] pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f]
[ 0.435508] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.435528] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.435560] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8500000-0xf85fffff]
[ 0.435961] pci 0000:03:00.0: reg 10 64bit mmio: [0xf7f00000-0xf7f01fff]
[ 0.436453] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.436497] pci 0000:03:00.0: PME# disabled
[ 0.436881] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.436900] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.436932] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf8600000-0xf86fffff]
[ 0.437116] pci 0000:05:00.0: reg 10 32bit mmio: [0xd7eff000-0xd7efffff]
[ 0.437218] pci 0000:05:00.0: supports D1 D2
[ 0.437224] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.437244] pci 0000:05:00.0: PME# disabled
[ 0.437422] pci 0000:05:00.1: reg 10 32bit mmio: [0xd7efe800-0xd7efefff]
[ 0.437680] pci 0000:05:00.1: supports D1 D2
[ 0.437686] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.437705] pci 0000:05:00.1: PME# disabled
[ 0.437882] pci 0000:05:00.2: reg 10 32bit mmio: [0xd7efe400-0xd7efe4ff]
[ 0.438139] pci 0000:05:00.2: supports D1 D2
[ 0.438145] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.438165] pci 0000:05:00.2: PME# disabled
[ 0.438472] pci 0000:00:1e.0: transparent bridge
[ 0.438492] pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff]
[ 0.438511] pci 0000:00:1e.0: bridge 32bit mmio: [0xd4000000-0xd7efffff]
[ 0.438543] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdbffffff]
[ 0.438718] pci_bus 0000:00: on NUMA node 0
[ 0.438742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.439500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.439787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.440114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.473923] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.474701] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.475472] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.476239] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.477055] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.477824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.478637] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.479404] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.480353] SCSI subsystem initialized
[ 0.480353] libata version 3.00 loaded.
[ 0.480353] ACPI: WMI: Mapper loaded
[ 0.480353] PCI: Using ACPI for IRQ routing
[ 0.496845] NET: Registered protocol family 8
[ 0.496853] NET: Registered protocol family 20
[ 0.543541] cfg80211: Using static regulatory domain info
[ 0.543541] cfg80211: Regulatory domain: US
[ 0.543541] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.543541] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.543541] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.543541] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.543541] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.543541] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.543541] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.543817] cfg80211: Calling CRDA for country: US
[ 0.544057] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544073] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.553402] Switched to high resolution mode on CPU 0
[ 0.553465] Switched to high resolution mode on CPU 1
[ 0.570063] pnp: PnP ACPI init
[ 0.570156] ACPI: bus type pnp registered
[ 0.587454] pnp: PnP ACPI: found 11 devices
[ 0.587463] ACPI: ACPI bus type pnp unregistered
[ 0.587471] PnPBIOS: Disabled by ACPI PNP
[ 0.587631] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.587644] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.587655] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.587665] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.587674] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.587685] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.587696] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.587707] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.587718] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.587728] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.587739] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.587750] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.587762] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.587773] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.587815] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.587825] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.587835] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.587845] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.587855] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.587866] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.587877] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.587887] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.587898] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.587909] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.587920] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.587930] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[ 0.626003] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.626018] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.626044] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.626064] pci 0000:00:1c.0: PREFETCH window: 0x000000f8500000-0x000000f85fffff
[ 0.626096] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.626109] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.626134] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
[ 0.626153] pci 0000:00:1c.1: PREFETCH window: 0x000000f8600000-0x000000f86fffff
[ 0.626201] pci 0000:05:00.0: CardBus bridge, secondary bus 0000:06
[ 0.626207] pci 0000:05:00.0: IO window: 0x004000-0x0040ff
[ 0.626227] pci 0000:05:00.0: IO window: 0x004400-0x0044ff
[ 0.626247] pci 0000:05:00.0: PREFETCH window: 0xd8000000-0xdbffffff
[ 0.626266] pci 0000:05:00.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.626286] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.626299] pci 0000:00:1e.0: IO window: 0x4000-0x7fff
[ 0.626324] pci 0000:00:1e.0: MEM window: 0xd4000000-0xd7efffff
[ 0.626343] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
[ 0.626424] alloc irq_desc for 20 on cpu 0 node 0
[ 0.626431] alloc kstat_irqs on cpu 0 node 0
[ 0.626449] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.626469] pci 0000:00:1c.0: setting latency timer to 64
[ 0.626501] alloc irq_desc for 21 on cpu 0 node 0
[ 0.626507] alloc kstat_irqs on cpu 0 node 0
[ 0.626521] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.626540] pci 0000:00:1c.1: setting latency timer to 64
[ 0.626563] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.626588] pci 0000:00:1e.0: setting latency timer to 64
[ 0.626620] alloc irq_desc for 16 on cpu 0 node 0
[ 0.626626] alloc kstat_irqs on cpu 0 node 0
[ 0.626640] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.626663] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.626671] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.626679] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.626686] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.626694] pci_bus 0000:02: resource 2 mem: [0xf8500000-0xf85fffff]
[ 0.626701] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.626708] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.626715] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 0.626722] pci_bus 0000:03: resource 2 mem: [0xf8600000-0xf86fffff]
[ 0.626729] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.626736] pci_bus 0000:05: resource 0 io: [0x4000-0x7fff]
[ 0.626743] pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd7efffff]
[ 0.626750] pci_bus 0000:05: resource 2 mem: [0xd8000000-0xdbffffff]
[ 0.626757] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.626764] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.626772] pci_bus 0000:06: resource 0 io: [0x4000-0x40ff]
[ 0.626778] pci_bus 0000:06: resource 1 io: [0x4400-0x44ff]
[ 0.626785] pci_bus 0000:06: resource 2 mem: [0xd8000000-0xdbffffff]
[ 0.626792] pci_bus 0000:06: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.627007] NET: Registered protocol family 2
[ 0.664749] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.667224] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.668577] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
[ 0.682796] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.682877] TCP reno registered
[ 0.691312] NET: Registered protocol family 1
[ 0.692110] checking if image is initramfs...
[ 1.326442] rootfs image is initramfs; unpacking...
[ 1.326933] Freeing initrd memory: 7399k freed
[ 1.336034] Simple Boot Flag at 0x35 set to 0x1
[ 1.344812] cpu0(2) debug files 133
[ 1.350111] cpu1(2) debug files 133
[ 1.353269] audit: initializing netlink socket (disabled)
[ 1.353361] type=2000 audit(1241126574.350:1): initialized
[ 1.377950] highmem bounce pool size: 64 pages
[ 1.377971] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.395390] VFS: Disk quotas dquot_6.5.2
[ 1.395999] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.402228] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 1.404511] fuse init (API version 7.11)
[ 1.405466] msgmni has been set to 1598
[ 1.407143] alg: No test for cipher_null (cipher_null-generic)
[ 1.407279] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 1.407413] alg: No test for digest_null (digest_null-generic)
[ 1.407563] alg: No test for compress_null (compress_null-generic)
[ 1.407946] cryptomgr_test used greatest stack depth: 2252 bytes left
[ 1.410677] alg: No test for stdrng (krng)
[ 1.411325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.411392] io scheduler noop registered
[ 1.411454] io scheduler cfq registered (default)
[ 1.411790] pci 0000:00:02.0: Boot video device
[ 1.413290] alloc irq_desc for 24 on cpu 0 node 0
[ 1.413298] alloc kstat_irqs on cpu 0 node 0
[ 1.413344] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.413423] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.414718] alloc irq_desc for 25 on cpu 0 node 0
[ 1.414726] alloc kstat_irqs on cpu 0 node 0
[ 1.414766] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 1.414841] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.417963] power_supply AC: uevent
[ 1.417969] power_supply AC: No power supply yet
[ 1.418465] power_supply AC: power_supply_changed
[ 1.418488] ACPI: AC Adapter [AC] (off-line)
[ 1.418665] power_supply AC: power_supply_changed_work
[ 1.418693] power_supply AC: power_supply_update_gen_leds 0
[ 1.418760] power_supply AC: uevent
[ 1.418766] power_supply AC: POWER_SUPPLY_NAME=AC
[ 1.418778] power_supply AC: Static prop TYPE=Mains
[ 1.418785] power_supply AC: 1 dynamic props
[ 1.418793] power_supply AC: prop ONLINE=0
[ 1.419864] input: Power Button as /class/input/input0
[ 1.420001] ACPI: Power Button [PWRF]
[ 1.420476] input: Lid Switch as /class/input/input1
[ 1.421396] ACPI: Lid Switch [LID]
[ 1.421837] input: Sleep Button as /class/input/input2
[ 1.421858] ACPI: Sleep Button [SLPB]
[ 1.425163] ACPI: SSDT bf6e1b32 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 1.430074] ACPI: SSDT bf6e1e39 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 1.445612] Monitor-Mwait will be used to enter C-1 state
[ 1.445732] Monitor-Mwait will be used to enter C-2 state
[ 1.445849] Monitor-Mwait will be used to enter C-3 state
[ 1.446586] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.447192] processor ACPI_CPU:00: registered as cooling_device0
[ 1.447215] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.448489] ACPI: SSDT bf6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 1.453397] ACPI: SSDT bf6e1db4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 1.462414] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.462674] processor ACPI_CPU:01: registered as cooling_device1
[ 1.462695] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.483603] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.483661] ACPI: Thermal Zone [THM0] (37 C)
[ 1.488706] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.488769] ACPI: Thermal Zone [THM1] (38 C)
[ 1.489094] isapnp: Scanning for PnP cards...
[ 1.648436] power_supply BAT0: uevent
[ 1.648443] power_supply BAT0: No power supply yet
[ 1.663634] power_supply BAT0: power_supply_changed
[ 1.663873] power_supply BAT0: power_supply_changed_work
[ 1.670468] ACPI: Battery Slot [BAT0] (battery present)
[ 1.677096] power_supply BAT0: power_supply_update_bat_leds 2
[ 1.677121] power_supply BAT0: uevent
[ 1.677128] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 1.677140] power_supply BAT0: Static prop TYPE=Battery
[ 1.677147] power_supply BAT0: 13 dynamic props
[ 1.677155] power_supply BAT0: prop STATUS=Discharging
[ 1.677164] power_supply BAT0: prop PRESENT=1
[ 1.677173] power_supply BAT0: prop TECHNOLOGY=Li-ion
[ 1.677183] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=14400000
[ 1.677192] power_supply BAT0: prop VOLTAGE_NOW=16507000
[ 1.677201] power_supply BAT0: prop CURRENT_NOW=16820000
[ 1.677210] power_supply BAT0: prop POWER_NOW=16820000
[ 1.677219] power_supply BAT0: prop ENERGY_FULL_DESIGN=74880000
[ 1.677229] power_supply BAT0: prop ENERGY_FULL=74880000
[ 1.677238] power_supply BAT0: prop ENERGY_NOW=74810000
[ 1.677247] power_supply BAT0: prop MODEL_NAME=93P5030
[ 1.677256] power_supply BAT0: prop MANUFACTURER=SONY
[ 1.677264] power_supply BAT0: prop SERIAL_NUMBER= 6895
[ 1.852770] isapnp: No Plug & Play device found
[ 2.011099] Non-volatile memory driver v1.3
[ 2.011312] Linux agpgart interface v0.103
[ 2.011549] [drm] Initialized drm 1.1.0 20060810
[ 2.011557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.025958] brd: module loaded
[ 2.031102] loop: module loaded
[ 2.031460] input: Macintosh mouse button emulation as /class/input/input3
[ 2.031616] Uniform Multi-Platform E-IDE driver
[ 2.032039] ide-gd driver 1.18
[ 2.033140] Driver 'sd' needs updating - please use bus_type methods
[ 2.033433] ahci 0000:00:1f.2: version 3.0
[ 2.033476] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.033644] alloc irq_desc for 26 on cpu 0 node 0
[ 2.033651] alloc kstat_irqs on cpu 0 node 0
[ 2.033696] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 2.033901] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
[ 2.033911] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 2.033932] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.034660] scsi0 : ahci
[ 2.035662] scsi1 : ahci
[ 2.036134] scsi2 : ahci
[ 2.036740] ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 26
[ 2.036747] ata2: DUMMY
[ 2.036757] ata3: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426200 irq 26
[ 2.037065] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 2.037071] Copyright (c) 1999-2006 Intel Corporation.
[ 2.037398] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 2.037404] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.037559] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.037585] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.037980] alloc irq_desc for 27 on cpu 0 node 0
[ 2.037987] alloc kstat_irqs on cpu 0 node 0
[ 2.038034] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 2.241383] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:72:86:9c:c6
[ 2.241391] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.241445] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
[ 2.241774] Fusion MPT base driver 3.04.07
[ 2.241779] Copyright (c) 1999-2008 LSI Corporation
[ 2.241816] Fusion MPT SPI Host driver 3.04.07
[ 2.242583] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.254066] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.254172] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.256597] mice: PS/2 mouse device common for all mice
[ 2.261048] cpuidle: using governor ladder
[ 2.264582] cpuidle: using governor menu
[ 2.265962] input: AT Translated Set 2 keyboard as /class/input/input4
[ 2.267372] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 2.267380] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.267385] thinkpad_acpi: ThinkPad BIOS 7NETB9WW (2.19 ), EC 7MHT25WW-1.03
[ 2.267392] thinkpad_acpi: Lenovo ThinkPad X61s, model 76663EU
[ 2.269206] thinkpad_acpi: radio switch found; radios are enabled
[ 2.269695] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.269702] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.294270] Registered led device: tpacpi::thinklight
[ 2.294908] thinkpad_acpi: acpi_bus_get_device(bay) failed: -19
[ 2.295009] thinkpad_acpi: disabling subdriver bay
[ 2.295422] Registered led device: tpacpi::power
[ 2.295791] Registered led device: tpacpi::standby
[ 2.301867] thinkpad_acpi: Backlight control force enabled, even if standard ACPI backlight interface is available
[ 2.301884] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 2.303912] input: ThinkPad Extra Buttons as /class/input/input5
[ 2.305011] Advanced Linux Sound Architecture Driver Version 1.0.19.
[ 2.318861] ALSA device list:
[ 2.318867] No soundcards found.
[ 2.322404] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.338239] TCP cubic registered
[ 2.340433] RPC: Registered udp transport module.
[ 2.340441] RPC: Registered tcp transport module.
[ 2.345586] Using IPI No-Shortcut mode
[ 2.347755] PM: Resume from disk failed.
[ 2.347832] registered taskstats version 1
[ 2.353550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.353611] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.354675] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.354686] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.354695] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.355096] ata1.00: ATA-7: INTEL SSDSA2MH080G1GC, 045C8820, max UDMA/133
[ 2.355105] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31)
[ 2.356477] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.356487] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.356496] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.357033] ata1.00: configured for UDMA/133
[ 2.371806] ata1.00: configured for UDMA/133
[ 2.371820] ata1: EH complete
[ 2.373030] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
[ 2.376159] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.376260] sd 0:0:0:0: [sda] Write Protect is off
[ 2.376269] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.376412] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.377373] sda: sda1 sda2
[ 2.380923] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.381142] Freeing unused kernel memory: 1660k freed
[ 2.383383] Write protecting the kernel text: 4052k
[ 2.384091] Write protecting the kernel read-only data: 1940k
[ 2.651972] usplash[1299] general protection ip:b7f63d3b sp:bfee4e88 error:0 in libusplash.so.0[b7f50000+29000]
[ 2.673160] device-mapper: uevent: version 1.0.3
[ 2.673594] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 2.779159] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.790509] power_supply AC: uevent
[ 2.790513] power_supply AC: POWER_SUPPLY_NAME=AC
[ 2.790520] power_supply AC: Static prop TYPE=Mains
[ 2.790524] power_supply AC: 1 dynamic props
[ 2.790529] power_supply AC: prop ONLINE=0
[ 2.790574] power_supply BAT0: uevent
[ 2.790577] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 2.790582] power_supply BAT0: Static prop TYPE=Battery
[ 2.790586] power_supply BAT0: 13 dynamic props
[ 2.798123] input: TPPS/2 IBM TrackPoint as /class/input/input6
[ 2.798578] power_supply BAT0: prop STATUS=Discharging
[ 2.798585] power_supply BAT0: prop PRESENT=1
[ 2.798590] power_supply BAT0: prop TECHNOLOGY=Li-ion
[ 2.798595] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=14400000
[ 2.798600] power_supply BAT0: prop VOLTAGE_NOW=16507000
[ 2.798604] power_supply BAT0: prop CURRENT_NOW=16820000
[ 2.798609] power_supply BAT0: prop POWER_NOW=16820000
[ 2.798613] power_supply BAT0: prop ENERGY_FULL_DESIGN=74880000
[ 2.798618] power_supply BAT0: prop ENERGY_FULL=74880000
[ 2.798623] power_supply BAT0: prop ENERGY_NOW=74810000
[ 2.798627] power_supply BAT0: prop MODEL_NAME=93P5030
[ 2.798632] power_supply BAT0: prop MANUFACTURER=SONY
[ 2.798636] power_supply BAT0: prop SERIAL_NUMBER= 6895
[ 2.827310] udevadm used greatest stack depth: 2172 bytes left
[ 2.859474] scsi_id used greatest stack depth: 1888 bytes left
[ 3.605170] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.785967] PM: Starting manual resume from disk
[ 3.785997] PM: Resume from partition 8:2
[ 3.786002] PM: Checking hibernation image.
[ 3.786681] PM: Resume from disk failed.
[ 3.799831] EXT4-fs: barriers enabled
[ 3.800518] kjournald2 starting: pid 2375, dev dm-0:8, commit interval 5 seconds
[ 3.800707] EXT4-fs: delayed allocation enabled
[ 3.800714] EXT4-fs: file extents enabled
[ 3.804557] EXT4-fs: mballoc enabled
[ 3.804774] EXT4-fs: mounted filesystem dm-0 with ordered data mode
[ 4.798246] readahead-list used greatest stack depth: 1736 bytes left
[ 5.000919] Clocksource tsc unstable (delta = -100432316 ns)
[ 5.103417] udev: starting version 141
[ 5.103471] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 5.227965] power_supply AC: uevent
[ 5.227969] power_supply AC: POWER_SUPPLY_NAME=AC
[ 5.227976] power_supply AC: Static prop TYPE=Mains
[ 5.227980] power_supply AC: 1 dynamic props
[ 5.227984] power_supply AC: prop ONLINE=0
[ 5.228034] power_supply BAT0: uevent
[ 5.228038] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 5.228044] power_supply BAT0: Static prop TYPE=Battery
[ 5.228048] power_supply BAT0: 13 dynamic props
[ 5.270580] power_supply BAT0: prop STATUS=Discharging
[ 5.270587] power_supply BAT0: prop PRESENT=1
[ 5.270593] power_supply BAT0: prop TECHNOLOGY=Li-ion
[ 5.270598] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=14400000
[ 5.270603] power_supply BAT0: prop VOLTAGE_NOW=16471000
[ 5.270608] power_supply BAT0: prop CURRENT_NOW=16998000
[ 5.270612] power_supply BAT0: prop POWER_NOW=16998000
[ 5.270617] power_supply BAT0: prop ENERGY_FULL_DESIGN=74880000
[ 5.270622] power_supply BAT0: prop ENERGY_FULL=74880000
[ 5.270626] power_supply BAT0: prop ENERGY_NOW=74790000
[ 5.270631] power_supply BAT0: prop MODEL_NAME=93P5030
[ 5.270636] power_supply BAT0: prop MANUFACTURER=SONY
[ 5.270640] power_supply BAT0: prop SERIAL_NUMBER= 6895
[ 6.215565] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 6.217612] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 6.221034] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 6.246233] alloc irq_desc for 17 on cpu 0 node 0
[ 6.246238] alloc kstat_irqs on cpu 0 node 0
[ 6.246249] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.246256] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 6.246326] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.286013] input: PC Speaker as /class/input/input7
[ 6.671367] input: HDA Digital PCBeep as /class/input/input8
[ 6.678697] modprobe used greatest stack depth: 1536 bytes left
[ 6.958358] ata_piix 0000:00:1f.1: version 2.12
[ 6.958400] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 6.958566] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 6.958879] scsi3 : ata_piix
[ 6.960236] scsi4 : ata_piix
[ 6.964812] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 6.964821] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 7.131740] ata5: port disabled. ignoring.
[ 7.164426] lp: driver loaded but no devices found
[ 7.577657] EXT4 FS on dm-0, internal journal on dm-0:8
[ 8.014466] EXT4-fs: barriers enabled
[ 8.015100] kjournald2 starting: pid 3879, dev sda1:8, commit interval 5 seconds
[ 8.015478] EXT4 FS on sda1, internal journal on sda1:8
[ 8.015484] EXT4-fs: delayed allocation enabled
[ 8.015603] EXT4-fs: mballoc enabled
[ 8.015682] EXT4-fs: mounted filesystem sda1 with ordered data mode
[ 10.269335] tun: Universal TUN/TAP device driver, 1.6
[ 10.269340] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 11.966942] power_supply AC: uevent
[ 11.966946] power_supply AC: POWER_SUPPLY_NAME=AC
[ 11.966952] power_supply AC: Static prop TYPE=Mains
[ 11.966955] power_supply AC: 1 dynamic props
[ 11.966959] power_supply AC: prop ONLINE=0
[ 11.967055] power_supply BAT0: uevent
[ 11.967058] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 11.967063] power_supply BAT0: Static prop TYPE=Battery
[ 11.967066] power_supply BAT0: 13 dynamic props
[ 11.973155] power_supply BAT0: prop STATUS=Discharging
[ 11.973160] power_supply BAT0: prop PRESENT=1
[ 11.973164] power_supply BAT0: prop TECHNOLOGY=Li-ion
[ 11.973169] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=14400000
[ 11.973173] power_supply BAT0: prop VOLTAGE_NOW=16442000
[ 11.973177] power_supply BAT0: prop CURRENT_NOW=16754000
[ 11.973181] power_supply BAT0: prop POWER_NOW=16754000
[ 11.973185] power_supply BAT0: prop ENERGY_FULL_DESIGN=74880000
[ 11.973189] power_supply BAT0: prop ENERGY_FULL=74880000
[ 11.973194] power_supply BAT0: prop ENERGY_NOW=74760000
[ 11.973198] power_supply BAT0: prop MODEL_NAME=93P5030
[ 11.973201] power_supply BAT0: prop MANUFACTURER=SONY
[ 11.973205] power_supply BAT0: prop SERIAL_NUMBER= 6895
[ 13.088134] ppdev: user-space parallel port driver
[ 14.150094] pci 0000:00:02.0: power state changed by ACPI to D0
[ 14.150109] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.150117] pci 0000:00:02.0: setting latency timer to 64
[ 14.152240] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 14.152246] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 14.152289] alloc irq_desc for 28 on cpu 0 node 0
[ 14.152293] alloc kstat_irqs on cpu 0 node 0
[ 14.152311] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 14.158652] acpi device:03: registered as cooling_device2
[ 14.159293] input: Video Bus as /class/input/input9
[ 14.159414] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.159572] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.140960] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 17.197077] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
Subsystem: Lenovo Device 20b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Lenovo Device 20b5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Lenovo Device 20b5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20de
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f8200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f8225000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20aa
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20aa
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
Subsystem: Lenovo Device 20ab
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f8426c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20ac
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f8220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 00000000f8500000-00000000f85fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f8600000-00000000f86fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20aa
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18a0 [size=32]
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20aa
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18c0 [size=32]
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
Subsystem: Lenovo Device 20ab
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f8427000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=08, sec-latency=32
I/O behind bridge: 00004000-00007fff
Memory behind bridge: d4000000-d7efffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20b6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Device 20a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin C routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18e0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, piix
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) (prog-if 01)
Subsystem: Lenovo Device 20a7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at 1c30 [size=8]
Region 1: I/O ports at 1c24 [size=4]
Region 2: I/O ports at 1c28 [size=8]
Region 3: I/O ports at 1c20 [size=4]
Region 4: I/O ports at 1c00 [size=32]
Region 5: Memory at f8426000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20a9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8427400 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c40 [size=32]
Kernel modules: i2c-i801
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: iwlagn
05:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Lenovo Device 20c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d7eff000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=05, secondary=06, subordinate=07, sec-latency=176
Memory window 0: d8000000-dbfff000 (prefetchable)
Memory window 1: c4000000-c7fff000 (prefetchable)
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel modules: yenta_socket
05:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10)
Subsystem: Lenovo Device 20c7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d7efe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel modules: ohci1394
05:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Subsystem: Lenovo Device 20c8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d7efe400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci-pci