[PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi-v2
From: Yinghai Lu
Date: Wed May 06 2009 - 13:08:17 EST
it seems that change about calling mp_config_acpi_gsi in acpi_pci_irq_enable()
never get into mainline.
actually we could call that in mp_register_gsi with struct device...
also could make mp_config_acpi_gsi to be static
v2: some calling could have to be pci device, need to check that
[Impact: make update_mptable working]
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
arch/x86/include/asm/mpspec.h | 9 -----
arch/x86/kernel/acpi/boot.c | 66 +++++++++++++++++++++++++-----------------
2 files changed, 40 insertions(+), 35 deletions(-)
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -77,17 +77,8 @@ extern int mp_register_gsi(struct device
int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity);
extern int mp_find_ioapic(int gsi);
extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
- return 0;
-}
#endif
#else /* !CONFIG_ACPI: */
static inline int acpi_probe_gsi(void)
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -33,6 +33,7 @@
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
@@ -1158,6 +1159,44 @@ void __init mp_config_acpi_legacy_irqs(v
}
}
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
int ioapic;
@@ -1189,6 +1228,7 @@ int mp_register_gsi(struct device *dev,
ioapic_pin);
return gsi;
}
+ mp_config_acpi_gsi(dev, gsi, triggering, polarity);
/*
* Avoid pin reprogramming. PRTs typically include entries
@@ -1208,32 +1248,6 @@ int mp_register_gsi(struct device *dev,
return gsi;
}
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
-
- if (!acpi_ioapic)
- return 0;
-
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
-}
-
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/