[PATCH] crypto: tcrypt: add option to not exit on success
From: Jarod Wilson
Date: Mon May 11 2009 - 10:10:06 EST
At present, the tcrypt module always exits with an -EAGAIN upon
successfully completing all the tests its been asked to run. There
are cases where it would be much simpler to verify all tests passed
if tcrypt simply stayed loaded (i.e. returned 0). Specifically, in
fips mode, all self-tests need to be run from the initrd, and its
much simpler to check the ret from modprobe for success than to
scrape dmesg. To make this doable, I've simply added a module param
to allow this behavior, leaving the default behavior more or less
the same as before, although now we're tracking all success/failure
rets as well.
The tcrypt_test() portion of the patch is dependent on my earlier
pair of patches that skip non-fips algs in fips mode, at least to
achieve the fully intended behavior.
Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
---
crypto/tcrypt.c | 168 +++++++++++++++++++++++++++++++------------------------
1 files changed, 94 insertions(+), 74 deletions(-)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 9e4974e..dee729c 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -27,6 +27,7 @@
#include <linux/timex.h>
#include <linux/interrupt.h>
#include "tcrypt.h"
+#include "internal.h"
/*
* Need slab memory for testing (size in number of pages).
@@ -45,6 +46,7 @@
static unsigned int sec;
static int mode;
+static int noexit;
static char *tvmem[TVMEMSIZE];
static char *check[] = {
@@ -468,248 +470,255 @@ static void test_available(void)
static inline int tcrypt_test(const char *alg)
{
- return alg_test(alg, alg, 0, 0);
+ int ret;
+
+ ret = alg_test(alg, alg, 0, 0);
+ /* non-fips algs return -EINVAL in fips mode */
+ if (fips_enabled && ret == -EINVAL)
+ ret = 0;
+ return ret;
}
-static void do_test(int m)
+static int do_test(int m)
{
int i;
+ int ret = 0;
switch (m) {
case 0:
for (i = 1; i < 200; i++)
- do_test(i);
+ ret += do_test(i);
break;
case 1:
- tcrypt_test("md5");
+ ret += tcrypt_test("md5");
break;
case 2:
- tcrypt_test("sha1");
+ ret += tcrypt_test("sha1");
break;
case 3:
- tcrypt_test("ecb(des)");
- tcrypt_test("cbc(des)");
+ ret += tcrypt_test("ecb(des)");
+ ret += tcrypt_test("cbc(des)");
break;
case 4:
- tcrypt_test("ecb(des3_ede)");
- tcrypt_test("cbc(des3_ede)");
+ ret += tcrypt_test("ecb(des3_ede)");
+ ret += tcrypt_test("cbc(des3_ede)");
break;
case 5:
- tcrypt_test("md4");
+ ret += tcrypt_test("md4");
break;
case 6:
- tcrypt_test("sha256");
+ ret += tcrypt_test("sha256");
break;
case 7:
- tcrypt_test("ecb(blowfish)");
- tcrypt_test("cbc(blowfish)");
+ ret += tcrypt_test("ecb(blowfish)");
+ ret += tcrypt_test("cbc(blowfish)");
break;
case 8:
- tcrypt_test("ecb(twofish)");
- tcrypt_test("cbc(twofish)");
+ ret += tcrypt_test("ecb(twofish)");
+ ret += tcrypt_test("cbc(twofish)");
break;
case 9:
- tcrypt_test("ecb(serpent)");
+ ret += tcrypt_test("ecb(serpent)");
break;
case 10:
- tcrypt_test("ecb(aes)");
- tcrypt_test("cbc(aes)");
- tcrypt_test("lrw(aes)");
- tcrypt_test("xts(aes)");
- tcrypt_test("ctr(aes)");
- tcrypt_test("rfc3686(ctr(aes))");
+ ret += tcrypt_test("ecb(aes)");
+ ret += tcrypt_test("cbc(aes)");
+ ret += tcrypt_test("lrw(aes)");
+ ret += tcrypt_test("xts(aes)");
+ ret += tcrypt_test("ctr(aes)");
+ ret += tcrypt_test("rfc3686(ctr(aes))");
break;
case 11:
- tcrypt_test("sha384");
+ ret += tcrypt_test("sha384");
break;
case 12:
- tcrypt_test("sha512");
+ ret += tcrypt_test("sha512");
break;
case 13:
- tcrypt_test("deflate");
+ ret += tcrypt_test("deflate");
break;
case 14:
- tcrypt_test("ecb(cast5)");
+ ret += tcrypt_test("ecb(cast5)");
break;
case 15:
- tcrypt_test("ecb(cast6)");
+ ret += tcrypt_test("ecb(cast6)");
break;
case 16:
- tcrypt_test("ecb(arc4)");
+ ret += tcrypt_test("ecb(arc4)");
break;
case 17:
- tcrypt_test("michael_mic");
+ ret += tcrypt_test("michael_mic");
break;
case 18:
- tcrypt_test("crc32c");
+ ret += tcrypt_test("crc32c");
break;
case 19:
- tcrypt_test("ecb(tea)");
+ ret += tcrypt_test("ecb(tea)");
break;
case 20:
- tcrypt_test("ecb(xtea)");
+ ret += tcrypt_test("ecb(xtea)");
break;
case 21:
- tcrypt_test("ecb(khazad)");
+ ret += tcrypt_test("ecb(khazad)");
break;
case 22:
- tcrypt_test("wp512");
+ ret += tcrypt_test("wp512");
break;
case 23:
- tcrypt_test("wp384");
+ ret += tcrypt_test("wp384");
break;
case 24:
- tcrypt_test("wp256");
+ ret += tcrypt_test("wp256");
break;
case 25:
- tcrypt_test("ecb(tnepres)");
+ ret += tcrypt_test("ecb(tnepres)");
break;
case 26:
- tcrypt_test("ecb(anubis)");
- tcrypt_test("cbc(anubis)");
+ ret += tcrypt_test("ecb(anubis)");
+ ret += tcrypt_test("cbc(anubis)");
break;
case 27:
- tcrypt_test("tgr192");
+ ret += tcrypt_test("tgr192");
break;
case 28:
- tcrypt_test("tgr160");
+ ret += tcrypt_test("tgr160");
break;
case 29:
- tcrypt_test("tgr128");
+ ret += tcrypt_test("tgr128");
break;
case 30:
- tcrypt_test("ecb(xeta)");
+ ret += tcrypt_test("ecb(xeta)");
break;
case 31:
- tcrypt_test("pcbc(fcrypt)");
+ ret += tcrypt_test("pcbc(fcrypt)");
break;
case 32:
- tcrypt_test("ecb(camellia)");
- tcrypt_test("cbc(camellia)");
+ ret += tcrypt_test("ecb(camellia)");
+ ret += tcrypt_test("cbc(camellia)");
break;
case 33:
- tcrypt_test("sha224");
+ ret += tcrypt_test("sha224");
break;
case 34:
- tcrypt_test("salsa20");
+ ret += tcrypt_test("salsa20");
break;
case 35:
- tcrypt_test("gcm(aes)");
+ ret += tcrypt_test("gcm(aes)");
break;
case 36:
- tcrypt_test("lzo");
+ ret += tcrypt_test("lzo");
break;
case 37:
- tcrypt_test("ccm(aes)");
+ ret += tcrypt_test("ccm(aes)");
break;
case 38:
- tcrypt_test("cts(cbc(aes))");
+ ret += tcrypt_test("cts(cbc(aes))");
break;
case 39:
- tcrypt_test("rmd128");
+ ret += tcrypt_test("rmd128");
break;
case 40:
- tcrypt_test("rmd160");
+ ret += tcrypt_test("rmd160");
break;
case 41:
- tcrypt_test("rmd256");
+ ret += tcrypt_test("rmd256");
break;
case 42:
- tcrypt_test("rmd320");
+ ret += tcrypt_test("rmd320");
break;
case 43:
- tcrypt_test("ecb(seed)");
+ ret += tcrypt_test("ecb(seed)");
break;
case 44:
- tcrypt_test("zlib");
+ ret += tcrypt_test("zlib");
break;
case 45:
- tcrypt_test("rfc4309(ccm(aes))");
+ ret += tcrypt_test("rfc4309(ccm(aes))");
break;
case 100:
- tcrypt_test("hmac(md5)");
+ ret += tcrypt_test("hmac(md5)");
break;
case 101:
- tcrypt_test("hmac(sha1)");
+ ret += tcrypt_test("hmac(sha1)");
break;
case 102:
- tcrypt_test("hmac(sha256)");
+ ret += tcrypt_test("hmac(sha256)");
break;
case 103:
- tcrypt_test("hmac(sha384)");
+ ret += tcrypt_test("hmac(sha384)");
break;
case 104:
- tcrypt_test("hmac(sha512)");
+ ret += tcrypt_test("hmac(sha512)");
break;
case 105:
- tcrypt_test("hmac(sha224)");
+ ret += tcrypt_test("hmac(sha224)");
break;
case 106:
- tcrypt_test("xcbc(aes)");
+ ret += tcrypt_test("xcbc(aes)");
break;
case 107:
- tcrypt_test("hmac(rmd128)");
+ ret += tcrypt_test("hmac(rmd128)");
break;
case 108:
- tcrypt_test("hmac(rmd160)");
+ ret += tcrypt_test("hmac(rmd160)");
break;
case 150:
- tcrypt_test("ansi_cprng");
+ ret += tcrypt_test("ansi_cprng");
break;
case 200:
@@ -873,6 +882,8 @@ static void do_test(int m)
test_available();
break;
}
+
+ return ret;
}
static int __init tcrypt_mod_init(void)
@@ -886,15 +897,21 @@ static int __init tcrypt_mod_init(void)
goto err_free_tv;
}
- do_test(mode);
+ err = do_test(mode);
+ if (err) {
+ printk(KERN_ERR "tcrypt: one or more tests failed!\n");
+ goto err_free_tv;
+ }
- /* We intentionaly return -EAGAIN to prevent keeping
- * the module. It does all its work from init()
- * and doesn't offer any runtime functionality
+ /* We intentionaly return -EAGAIN to prevent keeping the module,
+ * unless it was loaded w/the noexit param set. It does all its
+ * work from init() and doesn't offer any runtime functionality,
+ * but in some cases, checking for a successful load is helpful.
* => we don't need it in the memory, do we?
* -- mludvig
*/
- err = -EAGAIN;
+ if (!noexit)
+ err = -EAGAIN;
err_free_tv:
for (i = 0; i < TVMEMSIZE && tvmem[i]; i++)
@@ -916,6 +933,9 @@ module_param(mode, int, 0);
module_param(sec, uint, 0);
MODULE_PARM_DESC(sec, "Length in seconds of speed tests "
"(defaults to zero which uses CPU cycles instead)");
+module_param(noexit, int, 0);
+MODULE_PARM_DESC(noexit, "Whether or not the module should simply exit "
+ "after running tests. (default is to exit).");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Quick & dirty crypto testing module");
--
Jarod Wilson
jarod@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/