Re: [PATCH] [drivers] [SPI] SPI_GPIO: add support for controllers with missing MISO pin

[Ben Dooks]

On Mon, May 18, 2009 at 10:30:55AM +0200, Marek Szyprowski wrote:
> Hello,
> 
> On Thursday, May 07, 2009 2:32 PM Ben Dooks wrote:
> 
> > On Thu, May 07, 2009 at 02:24:11PM +0200, Marek Szyprowski wrote:
> > > There are some boards that do not strictly follow SPI standard and
> > use only 3 wires (SCLK, MOSI, SS) for connecting some simple auxiliary
> > chips and controls them with GPIO based 'spi controller'. In this
> > configuration the MISO line is missing (it is not required if the chip
> > does not transfer any data back to host). The example of such board is
> > a NCP ARM S3C64XX based machine. This patch adds support for such non-
> > standard configuration in GPIO-based SPI controller.
> > [...]
> > > diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
> > > index 26bd03e..5b75601 100644
> > > --- a/drivers/spi/spi_gpio.c
> > > +++ b/drivers/spi/spi_gpio.c
> > > @@ -114,7 +114,10 @@ static inline void setmosi(const struct
> > spi_device *spi, int is_on)
> > >
> > >  static inline int getmiso(const struct spi_device *spi)
> > >  {
> > > -	return !!gpio_get_value(SPI_MISO_GPIO);
> > > +	if (SPI_MISO_GPIO)
> > > +		return !!gpio_get_value(SPI_MISO_GPIO);
> > > +	else
> > > +		return 0;
> > >  }
> > 
> > Is zero a good approximation for 'no gpio' ?
> 
> Now I found that zero might be a valid gpio pin number on some architectures
> (it just means GPIO0 pin). This is imho a bit strange behavior of gpiolib as
> there should be also a special values for INVALID or NOGPIO cases. Does 
> anyone have any ideas how such cases should be handled properly? 

I belive there is a gpio_is_valid() function to tell you precisely if the
given GPIO is valid.

-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/