Re: EeePC 900 trackpad often not detected at boot in 2.6.30-rc4
From: Sitsofe Wheeler
Date: Mon May 18 2009 - 05:50:02 EST
On Mon, May 18, 2009 at 09:41:46AM +0100, Sitsofe Wheeler wrote:
>
> And of course just as soon as I finish building a new kernel the issue
> disappears. Even in older kernels that were seemingly showing the
> problem all the time. Sigh.
After numerous reboots I finally managed to reproduce the problem the
original way with your patch installed. I have no idea what the
necessary triggers are but I suspect it involves suspend to ram...
dmesg below:
[ 0.000000] Linux version 2.6.30-rc6-00026-g0f6f49a-dirty (@milan) (gcc version 4.2.4) #141 Sun May 17 16:30:00 BST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f780000 (usable)
[ 0.000000] BIOS-e820: 000000003f780000 - 000000003f790000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f790000 - 000000003f7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7de000 (reserved)
[ 0.000000] BIOS-e820: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3f780 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1016MB, range: 8MB, type UC
[ 0.000000] total RAM coverred: 1016M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1016MB, range: 8MB, type UC
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f780000 (usable)
[ 0.000000] modified: 000000003f780000 - 000000003f790000 (ACPI data)
[ 0.000000] modified: 000000003f790000 - 000000003f7d0000 (ACPI NVS)
[ 0.000000] modified: 000000003f7d0000 - 000000003f7de000 (reserved)
[ 0.000000] modified: 000000003f7e0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI: RSDP 000fbe60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3f780000 00034 (v01 A M I OEMRSDT 09000811 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f780200 00081 (v01 A M I OEMFACP 09000811 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f780400 06109 (v01 A0979 A0979034 00000034 INTL 20060113)
[ 0.000000] ACPI: FACS 3f790000 00040
[ 0.000000] ACPI: APIC 3f780390 00068 (v01 A M I OEMAPIC 09000811 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f790040 00046 (v01 A M I AMI_OEM 09000811 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f786510 0003C (v01 A M I OEMMCFG 09000811 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 0000aec0d8] TEXT DATA BSS ==> [0000100000 - 0000aec0d8]
[ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #3 [0000aed000 - 0000af11f8] BRK ==> [0000aed000 - 0000af11f8]
[ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #5 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f780
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f780
[ 0.000000] On node 0 totalpages: 259856
[ 0.000000] free_area_init_node: node 0, pgdat c05a5840, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32386 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257824
[ 0.000000] Kernel command line: root=/dev/sdb2 cfg80211.ieee80211_regdom=GB usb_storage.delay_use=0 cfg80211 pcie_aspm=force pcie_aspm.policy=powersave fastboot ro rootfstype=ext2 i8042.debug single
[ 0.000000] PCIe ASPM is forcedly enabled
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:288
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 899.984 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000999] ... MAX_LOCK_DEPTH: 48
[ 0.000999] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000999] ... CLASSHASH_SIZE: 4096
[ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.000999] ... CHAINHASH_SIZE: 8192
[ 0.000999] memory used by lock dependency info: 2847 kB
[ 0.000999] per task-struct memory footprint: 1152 bytes
[ 0.000999] ------------------------
[ 0.000999] | Locking API testsuite:
[ 0.000999] ----------------------------------------------------------------------------
[ 0.000999] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000999] --------------------------------------------------------------------------
[ 0.000999] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000999] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000999] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000999] --------------------------------------------------------------------------
[ 0.000999] recursive read-lock: | ok | | ok |
[ 0.000999] recursive read-lock #2: | ok | | ok |
[ 0.000999] mixed read-write-lock: | ok | | ok |
[ 0.000999] mixed write-read-lock: | ok | | ok |
[ 0.000999] --------------------------------------------------------------------------
[ 0.000999] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000999] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000999] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000999] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000999] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000999] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000999] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000999] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000999] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000999] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000999] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000999] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000999] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000999] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000999] hard-irq read-recursion/123: ok |
[ 0.000999] soft-irq read-recursion/123: ok |
[ 0.000999] hard-irq read-recursion/132: ok |
[ 0.000999] soft-irq read-recursion/132: ok |
[ 0.000999] hard-irq read-recursion/213: ok |
[ 0.000999] soft-irq read-recursion/213: ok |
[ 0.000999] hard-irq read-recursion/231: ok |
[ 0.000999] soft-irq read-recursion/231: ok |
[ 0.000999] hard-irq read-recursion/312: ok |
[ 0.000999] soft-irq read-recursion/312: ok |
[ 0.000999] hard-irq read-recursion/321: ok |
[ 0.000999] soft-irq read-recursion/321: ok |
[ 0.000999] -------------------------------------------------------
[ 0.000999] Good, all 218 testcases passed! |
[ 0.000999] ---------------------------------
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Initializing HighMem for node 0 (000377fe:0003f780)
[ 0.000999] Memory: 1019988k/1039872k available (3290k kernel code, 19168k reserved, 1506k data, 308k init, 130568k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff9c000 - 0xfffff000 ( 396 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc05b2000 - 0xc05ff000 ( 308 kB)
[ 0.000999] .data : 0xc04369a5 - 0xc05af4b8 (1506 kB)
[ 0.000999] .text : 0xc0100000 - 0xc04369a5 (3290 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000999] ODEBUG: 4 of 4 active objects replaced
[ 0.000999] ODEBUG: selftest passed
[ 0.001040] Calibrating delay loop (skipped), value calculated using timer frequency.. 1799.96 BogoMIPS (lpj=899984)
[ 0.001346] Security Framework initialized
[ 0.001519] Mount-cache hash table entries: 512
[ 0.004029] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004152] CPU: L2 cache: 512K
[ 0.004226] Intel machine check architecture supported.
[ 0.004306] Intel machine check reporting enabled on CPU#0.
[ 0.004394] CPU: Intel(R) Celeron(R) M processor 900MHz stepping 08
[ 0.004579] Checking 'hlt' instruction... OK.
[ 0.008938] ACPI: Core revision 20090320
[ 0.061022] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.061113] ftrace: allocating 14721 entries in 29 pages
[ 0.064990] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077594] net_namespace: 396 bytes
[ 0.078808] Time: 9:03:23 Date: 05/18/09
[ 0.080346] NET: Registered protocol family 16
[ 0.085437] ACPI: bus type pci registered
[ 0.085583] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.085667] PCI: Not using MMCONFIG.
[ 0.085952] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.086137] PCI: Using configuration type 1 for base access
[ 0.133937] bio: create slab <bio-0> at 0
[ 0.141898] ACPI: EC: Look up EC in DSDT
[ 0.216388] ACPI: Interpreter enabled
[ 0.216483] ACPI: (supports S0 S1 S3 S5)
[ 0.216993] ACPI: Using IOAPIC for interrupt routing
[ 0.217419] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.231512] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.231597] PCI: Using MMCONFIG for extended config space
[ 0.293925] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.294017] ACPI: EC: driver started in poll mode
[ 0.297310] ACPI: No dock devices found.
[ 0.297777] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.298865] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
[ 0.298883] pci 0000:00:02.0: reg 14 io port: [0xec00-0xec07]
[ 0.298899] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.298914] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.299075] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
[ 0.299364] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
[ 0.299474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.299561] pci 0000:00:1b.0: PME# disabled
[ 0.299788] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.299872] pci 0000:00:1c.0: PME# disabled
[ 0.300212] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.300299] pci 0000:00:1c.1: PME# disabled
[ 0.300528] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.300613] pci 0000:00:1c.2: PME# disabled
[ 0.300809] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.300935] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.301073] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.301199] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.301334] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.301451] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.301537] pci 0000:00:1d.7: PME# disabled
[ 0.301880] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.301895] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.301964] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.302054] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0380-038f
[ 0.302217] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.302233] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.302249] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.302265] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.302281] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.302345] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.302426] pci 0000:00:1f.2: PME# disabled
[ 0.302600] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.302976] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.303043] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff]
[ 0.303121] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.303206] pci 0000:03:00.0: PME# disabled
[ 0.305396] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.305535] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[ 0.306139] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.306156] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.306289] pci 0000:00:1e.0: transparent bridge
[ 0.306427] pci_bus 0000:00: on NUMA node 0
[ 0.306474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.308462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.308861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.309242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.367738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.369107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.370429] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.371745] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.373079] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.374503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.376017] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.377477] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.381423] SCSI subsystem initialized
[ 0.381710] libata version 3.00 loaded.
[ 0.383208] usbcore: registered new interface driver usbfs
[ 0.383691] usbcore: registered new interface driver hub
[ 0.384445] usbcore: registered new device driver usb
[ 0.387450] PCI: Using ACPI for IRQ routing
[ 0.391754] cfg80211: Using static regulatory domain info
[ 0.391839] cfg80211: Regulatory domain: US
[ 0.391912] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.392127] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.392211] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.392293] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.392376] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.392458] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.392540] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.392945] cfg80211: Calling CRDA for country: GB
[ 0.393847] hpet clockevent registered
[ 0.393859] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.394108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.394341] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.402243] pnp: PnP ACPI init
[ 0.402414] ACPI: bus type pnp registered
[ 0.422205] pnp: PnP ACPI: found 13 devices
[ 0.422288] ACPI: ACPI bus type pnp unregistered
[ 0.422440] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.422566] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.422652] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.422736] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.422822] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.422908] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.423008] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.423142] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.423276] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.423363] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.423472] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.423600] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.423715] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.423806] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.423897] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.463396] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.463483] pci 0000:00:1c.0: IO window: disabled
[ 0.463568] pci 0000:00:1c.0: MEM window: disabled
[ 0.463649] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.463736] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.463814] pci 0000:00:1c.1: IO window: disabled
[ 0.463899] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.463983] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.464080] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[ 0.464159] pci 0000:00:1c.2: IO window: disabled
[ 0.464242] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff
[ 0.464327] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.464442] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.464520] pci 0000:00:1e.0: IO window: disabled
[ 0.464602] pci 0000:00:1e.0: MEM window: disabled
[ 0.464682] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.464802] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.464892] pci 0000:00:1c.0: setting latency timer to 64
[ 0.464915] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.465011] pci 0000:00:1c.1: setting latency timer to 64
[ 0.465034] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.465121] pci 0000:00:1c.2: setting latency timer to 64
[ 0.465138] pci 0000:00:1e.0: setting latency timer to 64
[ 0.465150] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.465157] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.465165] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.465172] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.465179] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.465186] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.465193] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.465291] NET: Registered protocol family 2
[ 0.465741] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.466783] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.468960] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.483553] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.483742] TCP reno registered
[ 0.484262] NET: Registered protocol family 1
[ 0.487489] Machine check exception polling timer started.
[ 0.492010] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.492123] Scanning for low memory corruption every 60 seconds
[ 0.494845] ====[ backtrace testing ]===========
[ 0.494924] Testing a backtrace from process context.
[ 0.495146] The following trace is a kernel self test and not a bug!
[ 0.495230] Pid: 1, comm: swapper Not tainted 2.6.30-rc6-00026-g0f6f49a-dirty #141
[ 0.495334] Call Trace:
[ 0.495415] [<c0153860>] ? backtrace_regression_test+0x0/0xe0
[ 0.495497] [<c0153895>] backtrace_regression_test+0x35/0xe0
[ 0.495580] [<c01d0cd6>] ? proc_create_data+0x66/0xb0
[ 0.495660] [<c05c3a00>] ? kallsyms_init+0x0/0x30
[ 0.495738] [<c05c3a24>] ? kallsyms_init+0x24/0x30
[ 0.495816] [<c0153860>] ? backtrace_regression_test+0x0/0xe0
[ 0.497142] [<c0101122>] do_one_initcall+0x32/0x1d0
[ 0.497225] [<c014ca69>] ? validate_chain+0xe9/0xfd0
[ 0.497305] [<c014dc89>] ? __lock_acquire+0x339/0x5e0
[ 0.497387] [<c014dc89>] ? __lock_acquire+0x339/0x5e0
[ 0.497469] [<c018ee26>] ? check_bytes_and_report+0x26/0xd0
[ 0.497551] [<c018f2f4>] ? slab_pad_check+0x74/0x110
[ 0.497631] [<c014ca69>] ? validate_chain+0xe9/0xfd0
[ 0.497710] [<c018feaf>] ? check_object+0xef/0x1f0
[ 0.497790] [<c014dc89>] ? __lock_acquire+0x339/0x5e0
[ 0.497869] [<c01d0441>] ? proc_register+0x121/0x1e0
[ 0.497953] [<c0435672>] ? _spin_unlock+0x22/0x30
[ 0.498039] [<c01d0441>] ? proc_register+0x121/0x1e0
[ 0.498117] [<c01d0c5b>] ? __proc_create+0xeb/0x100
[ 0.498197] [<c01d0d7a>] ? create_proc_entry+0x5a/0xa0
[ 0.498280] [<c0156752>] ? register_irq_proc+0x92/0xb0
[ 0.498362] [<c05b288a>] kernel_init+0x9a/0xf0
[ 0.498439] [<c05b27f0>] ? kernel_init+0x0/0xf0
[ 0.498518] [<c010366b>] kernel_thread_helper+0x7/0x10
[ 0.498593] Testing a backtrace from irq context.
[ 0.498667] The following trace is a kernel self test and not a bug!
[ 0.498761] Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.30-rc6-00026-g0f6f49a-dirty #141
[ 0.498865] Call Trace:
[ 0.498938] [<c014c66b>] ? trace_hardirqs_on_caller+0x5b/0x180
[ 0.499068] [<c015384d>] backtrace_test_irq_callback+0xd/0x20
[ 0.499151] [<c012d624>] tasklet_action+0x44/0x90
[ 0.499230] [<c012d105>] __do_softirq+0x75/0x1a0
[ 0.499307] [<c012d360>] ? ksoftirqd+0x0/0xb0
[ 0.499384] [<c012d285>] do_softirq+0x55/0x60
[ 0.499460] [<c012d3a5>] ksoftirqd+0x45/0xb0
[ 0.499539] [<c013bda2>] kthread+0x52/0x80
[ 0.499616] [<c013bd50>] ? kthread+0x0/0x80
[ 0.499692] [<c010366b>] kernel_thread_helper+0x7/0x10
[ 0.499779] Testing a saved backtrace.
[ 0.499850] The following trace is a kernel self test and not a bug!
[ 0.499937] [<c010bb00>] save_stack_trace+0x30/0x50
[ 0.500175] [<c015391d>] backtrace_regression_test+0xbd/0xe0
[ 0.500294] [<c0101122>] do_one_initcall+0x32/0x1d0
[ 0.500409] [<c05b288a>] kernel_init+0x9a/0xf0
[ 0.500524] [<c010366b>] kernel_thread_helper+0x7/0x10
[ 0.500641] [<ffffffff>] 0xffffffff
[ 0.500751] ====[ end of backtrace testing ]====
[ 0.501911] highmem bounce pool size: 64 pages
[ 0.555415] fuse init (API version 7.11)
[ 0.557179] msgmni has been set to 1737
[ 0.559120] alg: No test for stdrng (krng)
[ 0.559331] io scheduler noop registered
[ 0.559407] io scheduler deadline registered
[ 0.560865] io scheduler cfq registered (default)
[ 0.561045] pci 0000:00:02.0: Boot video device
[ 0.562558] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.562594] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.564225] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.564260] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.565748] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.565782] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.571120] ACPI: AC Adapter [AC0] (on-line)
[ 0.573202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.573417] ACPI: Power Button [PWRF]
[ 0.574392] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.576009] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.582335] ACPI: Lid Switch [LID]
[ 0.583143] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.583260] ACPI: Sleep Button [SLPB]
[ 0.583960] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.584095] ACPI: Power Button [PWRB]
[ 0.587912] Marking TSC unstable due to TSC halts in idle
[ 0.588896] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]<7>Switched to high resolution mode on CPU 0
[ 0.589403] )
[ 0.590376] processor ACPI_CPU:00: registered as cooling_device0
[ 0.590478] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.612314] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.612482] ACPI: Thermal Zone [TZ00] (53 C)
[ 0.859722] Non-volatile memory driver v1.3
[ 0.859807] Linux agpgart interface v0.103
[ 0.859957] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 0.860849] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.865094] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.866421] [drm] Initialized drm 1.1.0 20060810
[ 0.866682] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.866770] pci 0000:00:02.0: setting latency timer to 64
[ 0.873248] [drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
[ 0.873422] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.090077] loop: module loaded
[ 1.090564] Driver 'sd' needs updating - please use bus_type methods
[ 1.091289] ahci 0000:00:1f.2: version 3.0
[ 1.091338] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.091483] ahci 0000:00:1f.2: PCI INT B disabled
[ 1.091591] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.092159] ata_piix 0000:00:1f.2: version 2.13
[ 1.092184] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.092278] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.092705] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.093217] scsi0 : ata_piix
[ 1.096468] scsi1 : ata_piix
[ 1.120067] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.120157] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.120775] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 1.120855] Copyright (c) 2007 Atheros Corporation.
[ 1.121070] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.121168] atl2 0000:03:00.0: setting latency timer to 64
[ 3.020696] ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.020807] ath5k 0000:01:00.0: setting latency timer to 64
[ 3.020891] ath5k 0000:01:00.0: registered as 'phy0'
[ 3.097308] phy0: Selected rate control algorithm 'minstrel'
[ 3.098662] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 3.099253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.099470] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.099594] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.099604] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.102605] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.106826] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.106913] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.106987] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 3.117077] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.118638] usb usb1: configuration #1 chosen from 1 choice
[ 3.120704] hub 1-0:1.0: USB hub found
[ 3.120992] hub 1-0:1.0: 8 ports detected
[ 3.124771] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.125512] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.125623] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.125633] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.126380] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.126574] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 3.127669] usb usb2: configuration #1 chosen from 1 choice
[ 3.128442] hub 2-0:1.0: USB hub found
[ 3.128698] hub 2-0:1.0: 2 ports detected
[ 3.130523] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.130634] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.130645] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.131299] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.131527] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 3.132714] usb usb3: configuration #1 chosen from 1 choice
[ 3.133365] hub 3-0:1.0: USB hub found
[ 3.133487] hub 3-0:1.0: 2 ports detected
[ 3.135100] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.135210] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.135220] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.135801] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.135979] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 3.137317] usb usb4: configuration #1 chosen from 1 choice
[ 4.147734] hub 4-0:1.0: USB hub found
[ 4.147872] hub 4-0:1.0: 2 ports detected
[ 4.149470] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 4.149584] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.149594] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.150218] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 4.150432] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 4.151636] usb usb5: configuration #1 chosen from 1 choice
[ 4.152277] hub 5-0:1.0: USB hub found
[ 4.152404] hub 5-0:1.0: 2 ports detected
[ 4.154239] Initializing USB Mass Storage driver...
[ 4.154742] usbcore: registered new interface driver usb-storage
[ 4.154831] USB Mass Storage support registered.
[ 4.155898] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.157170] drivers/input/serio/i8042.c: 20 -> i8042 (command) [3]
[ 4.157182] drivers/input/serio/i8042.c: 65 <- i8042 (return) [3]
[ 4.157220] drivers/input/serio/i8042.c: 60 -> i8042 (command) [3]
[ 4.158014] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [3]
[ 4.159075] drivers/input/serio/i8042.c: d3 -> i8042 (command) [4]
[ 4.159075] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [4]
[ 4.159075] drivers/input/serio/i8042.c: 5a <- i8042 (return) [4]
[ 4.162334] drivers/input/serio/i8042.c: a7 -> i8042 (command) [8]
[ 4.163013] drivers/input/serio/i8042.c: 20 -> i8042 (command) [8]
[ 4.163013] drivers/input/serio/i8042.c: 74 <- i8042 (return) [8]
[ 4.163517] drivers/input/serio/i8042.c: a8 -> i8042 (command) [9]
[ 4.164508] drivers/input/serio/i8042.c: 20 -> i8042 (command) [9]
[ 4.164508] drivers/input/serio/i8042.c: 54 <- i8042 (return) [9]
[ 4.166244] drivers/input/serio/i8042.c: 60 -> i8042 (command) [12]
[ 4.167194] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [12]
[ 4.168463] drivers/input/serio/i8042.c: d3 -> i8042 (command) [13]
[ 4.168463] drivers/input/serio/i8042.c: a5 -> i8042 (parameter) [13]
[ 4.173360] drivers/input/serio/i8042.c: 60 -> i8042 (command) [19]
[ 4.174010] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [19]
[ 4.177444] drivers/input/serio/i8042.c: d3 -> i8042 (command) [22]
[ 4.177444] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [22]
[ 4.177444] drivers/input/serio/i8042.c: f0 <- i8042 (return) [22]
[ 4.183982] drivers/input/serio/i8042.c: d3 -> i8042 (command) [29]
[ 4.184684] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [29]
[ 4.184684] drivers/input/serio/i8042.c: 56 <- i8042 (return) [29]
[ 4.187554] drivers/input/serio/i8042.c: d3 -> i8042 (command) [33]
[ 4.188233] drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [33]
[ 4.188233] drivers/input/serio/i8042.c: a4 <- i8042 (return) [33]
[ 4.190439] drivers/input/serio/i8042.c: Interrupt 12, without any data [36]
[ 4.190763] drivers/input/serio/i8042.c: 60 -> i8042 (command) [36]
[ 4.191390] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [36]
[ 4.192039] drivers/input/serio/i8042.c: Interrupt 1, without any data [38]
[ 4.192053] drivers/input/serio/i8042.c: Interrupt 1, without any data [38]
[ 4.193012] drivers/input/serio/i8042.c: 60 -> i8042 (command) [38]
[ 4.193012] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [38]
[ 4.195469] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.195632] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.198167] mice: PS/2 mouse device common for all mice
[ 4.201881] drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [47]
[ 4.202635] rtc_cmos 00:03: RTC can wake from S4
[ 4.203739] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.203879] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 4.204574] Linux video capture interface: v2.00
[ 4.205987] usbcore: registered new interface driver uvcvideo
[ 4.206106] USB Video Class driver (v0.1.0)
[ 4.208266] cpuidle: using governor ladder
[ 4.212082] ACPI: Battery Slot [BAT0] (battery present)
[ 4.213037] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [59]
[ 4.214070] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [60]
[ 4.216170] cpuidle: using governor menu
[ 4.216351] eeepc: Eee PC Hotkey Driver
[ 4.217073] eeepc: Hotkey init flags 0x41
[ 4.217160] drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [63]
[ 4.219576] eeepc: Get control methods supported: 0x101711
[ 4.220054] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [66]
[ 4.220373] input: Asus EeePC extra buttons as /devices/virtual/input/input4
[ 4.226234] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [72]
[ 4.229566] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [75]
[ 4.232490] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [78]
[ 4.232533] drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [78]
[ 4.233815] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 4.235581] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.235802] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.237209] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [83]
[ 4.237281] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [83]
[ 4.243975] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [89]
[ 4.244042] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [90]
[ 4.249562] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [95]
[ 4.250660] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.251650] drivers/input/serio/i8042.c: d4 -> i8042 (command) [97]
[ 4.252017] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [97]
[ 4.263873] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [109]
[ 4.266201] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 4.266368] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.266467] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.266543] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.266616] mono: mono_out=0x0
[ 4.266687] inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0
[ 4.267050] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [113]
[ 4.270440] drivers/input/serio/i8042.c: d4 -> i8042 (command) [116]
[ 4.271016] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [116]
[ 4.274883] ALSA device list:
[ 4.274963] #0: HDA Intel at 0xf7eb8000 irq 16
[ 4.275258] TCP cubic registered
[ 4.276597] NET: Registered protocol family 17
[ 4.276802] Using IPI Shortcut mode
[ 4.279191] Magic number: 9:810:70
[ 4.279548] rtc_cmos 00:03: setting system clock to 2009-05-18 09:03:27 UTC (1242637407)
[ 4.281412] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 1, 12) [127]
[ 4.283338] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 1, 12) [129]
[ 5.406620] libps2: errorneously fail 754 command
[ 5.412384] ata2.00: CFA: ASUS-PHISON OB SSD, TST2.04P, max UDMA/66
[ 5.412468] ata2.00: 7880544 sectors, multi 0: LBA
[ 5.412617] ata2.01: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 5.412697] ata2.01: 31522176 sectors, multi 0: LBA
[ 5.416319] ata2.00: configured for UDMA/66
[ 5.419416] ata2.01: configured for UDMA/66
[ 5.420806] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON OB S TST2 PQ: 0 ANSI: 5
[ 5.425842] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5
[ 5.428258] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors: (4.03 GB/3.75 GiB)
[ 5.428471] sd 1:0:0:0: [sda] Write Protect is off
[ 5.428548] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.428736] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.429957] sda: sda1 sda2 sda3 sda4
[ 5.434227] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[ 5.434441] sd 1:0:1:0: [sdb] Write Protect is off
[ 5.434518] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.434707] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.435537] sdb: sdb1 sdb2
[ 5.442845] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 5.443249] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.448147] EXT2-fs warning (device sdb2): ext2_fill_super: mounting ext3 filesystem as ext2
[ 5.448559] VFS: Mounted root (ext2 filesystem) readonly on device 8:18.
[ 5.448835] Freeing unused kernel memory: 308k freed
[ 5.449922] Write protecting the kernel text: 3292k
[ 5.450037] Testing CPA: Reverting c0100000-c0437000
[ 5.450723] Testing CPA: write protecting again
[ 5.451643] Write protecting the kernel read-only data: 1108k
[ 5.451728] Testing CPA: undo c0437000-c054c000
[ 5.452036] Testing CPA: write protecting again
[ 5.628141] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 5.746226] usb 1-5: configuration #1 chosen from 1 choice
[ 5.749232] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.756692] usb-storage: device found at 2
[ 5.757384] usb-storage: device scan complete
[ 5.758534] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 5.893045] Clocksource tsc unstable (delta = -125052842 ns)
[ 6.304373] sd 2:0:0:0: [sdc] 15661056 512-byte hardware sectors: (8.01 GB/7.46 GiB)
[ 6.305088] sd 2:0:0:0: [sdc] Write Protect is on
[ 6.305169] sd 2:0:0:0: [sdc] Mode Sense: 03 00 80 00
[ 6.305175] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.309334] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.309460] sdc: sdc1 sdc2
[ 6.316659] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 17.311968] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [13157]
[ 17.315226] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 0, 1) [13161]
[ 17.418399] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [13264]
[ 17.422965] drivers/input/serio/i8042.c: d0 <- i8042 (interrupt, 0, 1) [13268]
[ 17.487371] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [13333]
[ 17.490538] drivers/input/serio/i8042.c: 50 <- i8042 (interrupt, 0, 1) [13336]
[ 17.590392] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [13436]
[ 17.594934] drivers/input/serio/i8042.c: d0 <- i8042 (interrupt, 0, 1) [13440]
[ 17.917153] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [13763]
[ 18.025255] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [13871]
[ 18.378129] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [14224]
[ 18.380531] drivers/input/serio/i8042.c: 48 <- i8042 (interrupt, 0, 1) [14226]
[ 18.481050] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [14327]
[ 18.485641] drivers/input/serio/i8042.c: c8 <- i8042 (interrupt, 0, 1) [14331]
[ 18.566358] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [14412]
[ 18.569816] drivers/input/serio/i8042.c: 48 <- i8042 (interrupt, 0, 1) [14415]
[ 18.636537] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [14482]
[ 18.641163] drivers/input/serio/i8042.c: c8 <- i8042 (interrupt, 0, 1) [14487]
[ 19.336030] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [15182]
[ 19.339276] drivers/input/serio/i8042.c: 48 <- i8042 (interrupt, 0, 1) [15185]
[ 19.442418] drivers/input/serio/i8042.c: e0 <- i8042 (interrupt, 0, 1) [15288]
[ 19.447008] drivers/input/serio/i8042.c: c8 <- i8042 (interrupt, 0, 1) [15292]
[ 19.910757] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [15756]
[ 20.052248] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [15898]
[ 28.035061] drivers/input/serio/i8042.c: 1d <- i8042 (interrupt, 0, 1) [23881]
[ 28.247286] drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [24093]
[ 28.352789] drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [24198]
[ 29.090598] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [24936]
[ 29.160843] drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [25006]
[ 29.230654] drivers/input/serio/i8042.c: 9d <- i8042 (interrupt, 0, 1) [25076]
[ 29.394823] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [25240]
[ 29.500592] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [25346]
[ 29.670173] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [25516]
[ 29.739340] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [25585]
[ 29.775344] drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [25621]
[ 29.809773] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [25655]
[ 29.845395] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [25691]
[ 29.949493] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [25795]
[ 30.377098] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [26223]
[ 30.481153] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [26327]
[ 30.492087] CPA self-test:
[ 30.492277] 4k 4094 large 218 gb 0 x 4312[c0000000-f77fd000] miss 0
[ 30.520397] 4k 194558 large 32 gb 0 x 194590[c0000000-f77fd000] miss 0
[ 30.543425] 4k 194558 large 32 gb 0 x 194590[c0000000-f77fd000] miss 0
[ 30.543431] ok.
[ 32.686766] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [28532]
[ 32.766745] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [28612]
[ 32.792008] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [28637]
[ 32.931149] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [28777]
[ 32.953929] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [28799]
[ 33.061340] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [28907]
[ 33.096989] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [28942]
[ 33.166981] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [29012]
[ 33.170290] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [29016]
[ 33.201067] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [29047]
[ 33.332126] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [29178]
[ 33.540822] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [29386]
[ 33.614626] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [29460]
[ 33.825572] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [29671]
[ 34.002889] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [29848]
[ 34.038426] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [29884]
[ 34.107661] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [29953]
[ 34.142604] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [29988]
[ 34.511614] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [30357]
[ 34.582090] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [30428]
[ 34.584459] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [30430]
[ 34.721646] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [30567]
[ 34.757042] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [30603]
[ 34.861035] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [30707]
[ 34.897827] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [30743]
[ 34.968542] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [30814]
[ 34.971721] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [30817]
[ 35.037919] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [30883]
[ 37.908523] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [33754]
[ 38.050925] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [33896]
[ 38.956417] drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [34802]
[ 39.098163] drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [34944]
[ 39.103888] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [34949]
[ 39.211045] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [35057]
[ 39.760878] drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, 0, 1) [35606]
[ 39.902984] drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, 0, 1) [35748]
[ 40.101448] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [35947]
--
Sitsofe | http://sucs.org/~sits/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/