[GIT PULL] x86/kbuild for v2.6.31

From: Ingo Molnar
Date: Wed Jun 10 2009 - 17:24:02 EST

Next message: Stefan Schmidt: "Re: MSM6281 support was: HTC Dream aka. t-mobile g1 support"
Previous message: Ingo Molnar: "[GIT PULL] x86/fpu for v2.6.31"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Linus,

Please pull the latest x86-kbuild-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-kbuild-for-linus

A difficult unification, lots of cleanups and future-proofing - plus
fixes for relocatable kernels. This topic branch had three
regressions.

out-of-topic modifications in x86-kbuild-for-linus:
---------------------------------------------------
kernel/sysctl.c # 5031296: x86: add extension fields for boo
scripts/Makefile.lib # d3dd3b5: kbuild: allow compressors (gzip,
scripts/bin_size # d3dd3b5: kbuild: allow compressors (gzip,

Thanks,

Ingo

------------------>
H. Peter Anvin (26):
x86, boot: align the .bss section in the decompressor
kbuild: allow compressors (gzip, bzip2, lzma) to take multiple inputs
x86: add a Kconfig symbol for when relocations are needed
x86, boot: simplify arch/x86/boot/compressed/Makefile
x86, boot: follow standard Kbuild style for compression suffix
x86, boot: use BP_scratch in arch/x86/boot/compressed/head_*.S
x86, boot: stylistic cleanups for boot/compressed/head_32.S
x86, boot: stylistic cleanups for boot/compressed/head_64.S
x86, boot: straighten out ranges to copy/zero in compressed/head*.S
x86, boot: set up the decompression stack as early as possible
x86, boot: zero EFLAGS on 32 bits
x86, boot: use appropriate rep string for move and clear
x86, boot: determine compressed code offset at compile time
x86, boot: make symbols from the main vmlinux available
x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits
x86, boot: remove dead code from boot/compressed/head_*.S
x86, boot: make kernel_alignment adjustable; new bzImage fields
x86: document new bzImage fields
x86: default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN to 16 MB
x86: make CONFIG_RELOCATABLE the default
x86, defconfig: update to current, no material changes
x86, defconfig: update kernel position parameters
x86: add extension fields for bootloader type and version
x86, boot: correct sanity checks in boot/compressed/misc.c
x86-64: align __PHYSICAL_START, remove __KERNEL_ALIGN
x86, boot: correct the calculation of ZO_INIT_SIZE

Ingo Molnar (2):
x86, vmlinux.lds: add copyright
x86, vmlinux.lds: fix relocatable symbols

Linus Torvalds (1):
x86: unify arch/x86/boot/compressed/vmlinux_*.lds

Mike Galbraith (1):
x86, boot: add new generated files to the appropriate .gitignore files

Sam Ravnborg (16):
x86: standardize Kbuild rules
x86: beautify vmlinux_64.lds.S
x86: beautify vmlinux_32.lds.S
x86, vmlinux.lds: unify header/footer
x86, vmlinux.lds: unify PHDRS
x86, vmlinux.lds: unify start/end of SECTIONS
x86, vmlinux.lds: unify .text output sections
x86, vmlinux.lds: unify exception table
x86, vmlinux.lds: unify data output sections
x86, vmlinux.lds: move vsyscall output sections
x86, vmlinux.lds: unify first part of initdata
x86, vmlinux.lds: unify parainstructions
x86, vmlinux.lds: unify .exit.* and .init.ramfs
x86, vmlinux.lds: unify percpu
x86, vmlinux.lds: unify remaining parts
x86: boot/compressed/vmlinux.lds.S: fix build of bzImage with 64 bit compiler

Documentation/x86/boot.txt | 122 ++++++-
arch/x86/Kbuild | 16 +
arch/x86/Kconfig | 41 ++-
arch/x86/Makefile | 19 +-
arch/x86/boot/.gitignore | 2 +
arch/x86/boot/Makefile | 24 +-
arch/x86/boot/compressed/.gitignore | 3 +
arch/x86/boot/compressed/Makefile | 54 +--
arch/x86/boot/compressed/head_32.S | 194 +++++-----
arch/x86/boot/compressed/head_64.S | 169 ++++----
arch/x86/boot/compressed/misc.c | 12 +-
arch/x86/boot/compressed/mkpiggy.c | 97 +++++
.../compressed/{vmlinux_64.lds => vmlinux.lds.S} | 29 +-
arch/x86/boot/compressed/vmlinux.scr | 10 -
arch/x86/boot/compressed/vmlinux_32.lds | 43 --
arch/x86/boot/header.S | 28 +-
arch/x86/configs/i386_defconfig | 148 ++++++--
arch/x86/configs/x86_64_defconfig | 150 +++++--
arch/x86/include/asm/boot.h | 15 +
arch/x86/include/asm/bootparam.h | 3 +-
arch/x86/include/asm/page_64_types.h | 14 +-
arch/x86/include/asm/processor.h | 1 +
arch/x86/kernel/asm-offsets_32.c | 1 +
arch/x86/kernel/asm-offsets_64.c | 1 +
arch/x86/kernel/head_32.S | 7 -
arch/x86/kernel/setup.c | 10 +-
arch/x86/kernel/vmlinux.lds.S | 430 +++++++++++++++++++-
arch/x86/kernel/vmlinux_32.lds.S | 229 -----------
arch/x86/kernel/vmlinux_64.lds.S | 298 --------------
kernel/sysctl.c | 8 +
scripts/Makefile.lib | 28 +-
scripts/bin_size | 10 -
32 files changed, 1235 insertions(+), 981 deletions(-)
create mode 100644 arch/x86/Kbuild
create mode 100644 arch/x86/boot/compressed/mkpiggy.c
rename arch/x86/boot/compressed/{vmlinux_64.lds => vmlinux.lds.S} (57%)
delete mode 100644 arch/x86/boot/compressed/vmlinux.scr
delete mode 100644 arch/x86/boot/compressed/vmlinux_32.lds
delete mode 100644 arch/x86/kernel/vmlinux_32.lds.S
delete mode 100644 arch/x86/kernel/vmlinux_64.lds.S
delete mode 100644 scripts/bin_size

diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index e020366..8da3a79 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -50,6 +50,10 @@ Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format
Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical
pointer to single linked list of struct setup_data.

+Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
+ beyond the kernel_alignment added, new init_size and
+ pref_address fields. Added extended boot loader IDs.
+
**** MEMORY LAYOUT

The traditional memory map for the kernel loader, used for Image or
@@ -168,12 +172,13 @@ Offset Proto Name Meaning
021C/4 2.00+ ramdisk_size initrd size (set by boot loader)
0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only
0224/2 2.01+ heap_end_ptr Free memory after setup end
-0226/2 N/A pad1 Unused
+0226/1 2.02+(3 ext_loader_ver Extended boot loader version
+0227/1 2.02+(3 ext_loader_type Extended boot loader ID
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
022C/4 2.03+ ramdisk_max Highest legal initrd address
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
-0235/1 N/A pad2 Unused
+0235/1 2.10+ min_alignment Minimum alignment, as a power of two
0236/2 N/A pad3 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
@@ -182,6 +187,8 @@ Offset Proto Name Meaning
024C/4 2.08+ payload_length Length of kernel payload
0250/8 2.09+ setup_data 64-bit physical pointer to linked list
of struct setup_data
+0258/8 2.10+ pref_address Preferred loading address
+0260/4 2.10+ init_size Linear memory required during initialization

(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
@@ -190,6 +197,8 @@ Offset Proto Name Meaning
field are unusable, which means the size of a bzImage kernel
cannot be determined.

+(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+
If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
the boot protocol version is "old". Loading an old kernel, the
following parameters should be assumed:
@@ -343,18 +352,32 @@ Protocol: 2.00+
0xTV here, where T is an identifier for the boot loader and V is
a version number. Otherwise, enter 0xFF here.

+ For boot loader IDs above T = 0xD, write T = 0xE to this field and
+ write the extended ID minus 0x10 to the ext_loader_type field.
+ Similarly, the ext_loader_ver field can be used to provide more than
+ four bits for the bootloader version.
+
+ For example, for T = 0x15, V = 0x234, write:
+
+ type_of_loader <- 0xE4
+ ext_loader_type <- 0x05
+ ext_loader_ver <- 0x23
+
Assigned boot loader ids:
0 LILO (0x00 reserved for pre-2.00 bootloader)
1 Loadlin
2 bootsect-loader (0x20, all other values reserved)
- 3 SYSLINUX
- 4 EtherBoot
+ 3 Syslinux
+ 4 Etherboot/gPXE
5 ELILO
7 GRUB
- 8 U-BOOT
+ 8 U-Boot
9 Xen
A Gujin
B Qemu
+ C Arcturus Networks uCbootloader
+ E Extended (see ext_loader_type)
+ F Special (0xFF = undefined)

Please contact <hpa@xxxxxxxxx> if you need a bootloader ID
value assigned.
@@ -453,6 +476,35 @@ Protocol: 2.01+
Set this field to the offset (from the beginning of the real-mode
code) of the end of the setup stack/heap, minus 0x0200.

+Field name: ext_loader_ver
+Type: write (optional)
+Offset/size: 0x226/1
+Protocol: 2.02+
+
+ This field is used as an extension of the version number in the
+ type_of_loader field. The total version number is considered to be
+ (type_of_loader & 0x0f) + (ext_loader_ver << 4).
+
+ The use of this field is boot loader specific. If not written, it
+ is zero.
+
+ Kernels prior to 2.6.31 did not recognize this field, but it is safe
+ to write for protocol version 2.02 or higher.
+
+Field name: ext_loader_type
+Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0)
+Offset/size: 0x227/1
+Protocol: 2.02+
+
+ This field is used as an extension of the type number in
+ type_of_loader field. If the type in type_of_loader is 0xE, then
+ the actual type is (ext_loader_type + 0x10).
+
+ This field is ignored if the type in type_of_loader is not 0xE.
+
+ Kernels prior to 2.6.31 did not recognize this field, but it is safe
+ to write for protocol version 2.02 or higher.
+
Field name: cmd_line_ptr
Type: write (obligatory)
Offset/size: 0x228/4
@@ -482,11 +534,19 @@ Protocol: 2.03+
0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)

Field name: kernel_alignment
-Type: read (reloc)
+Type: read/modify (reloc)
Offset/size: 0x230/4
-Protocol: 2.05+
+Protocol: 2.05+ (read), 2.10+ (modify)
+
+ Alignment unit required by the kernel (if relocatable_kernel is
+ true.) A relocatable kernel that is loaded at an alignment
+ incompatible with the value in this field will be realigned during
+ kernel initialization.

- Alignment unit required by the kernel (if relocatable_kernel is true.)
+ Starting with protocol version 2.10, this reflects the kernel
+ alignment preferred for optimal performance; it is possible for the
+ loader to modify this field to permit a lesser alignment. See the
+ min_alignment and pref_address field below.

Field name: relocatable_kernel
Type: read (reloc)
@@ -498,6 +558,22 @@ Protocol: 2.05+
After loading, the boot loader must set the code32_start field to
point to the loaded code, or to a boot loader hook.

+Field name: min_alignment
+Type: read (reloc)
+Offset/size: 0x235/1
+Protocol: 2.10+
+
+ This field, if nonzero, indicates as a power of two the minimum
+ alignment required, as opposed to preferred, by the kernel to boot.
+ If a boot loader makes use of this field, it should update the
+ kernel_alignment field with the alignment unit desired; typically:
+
+ kernel_alignment = 1 << min_alignment
+
+ There may be a considerable performance cost with an excessively
+ misaligned kernel. Therefore, a loader should typically try each
+ power-of-two alignment from kernel_alignment down to this alignment.
+
Field name: cmdline_size
Type: read
Offset/size: 0x238/4
@@ -582,6 +658,36 @@ Protocol: 2.09+
sure to consider the case where the linked list already contains
entries.

+Field name: pref_address
+Type: read (reloc)
+Offset/size: 0x258/8
+Protocol: 2.10+
+
+ This field, if nonzero, represents a preferred load address for the
+ kernel. A relocating bootloader should attempt to load at this
+ address if possible.
+
+ A non-relocatable kernel will unconditionally move itself and to run
+ at this address.
+
+Field name: init_size
+Type: read
+Offset/size: 0x25c/4
+
+ This field indicates the amount of linear contiguous memory starting
+ at the kernel runtime start address that the kernel needs before it
+ is capable of examining its memory map. This is not the same thing
+ as the total amount of memory the kernel needs to boot, but it can
+ be used by a relocating boot loader to help select a safe load
+ address for the kernel.
+
+ The kernel runtime start address is determined by the following algorithm:
+
+ if (relocatable_kernel)
+ runtime_start = align_up(load_address, kernel_alignment)
+ else
+ runtime_start = pref_address
+

**** THE IMAGE CHECKSUM

diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
new file mode 100644
index 0000000..ad8ec35
--- /dev/null
+++ b/arch/x86/Kbuild
@@ -0,0 +1,16 @@
+
+obj-$(CONFIG_KVM) += kvm/
+
+# Xen paravirtualization support
+obj-$(CONFIG_XEN) += xen/
+
+# lguest paravirtualization support
+obj-$(CONFIG_LGUEST_GUEST) += lguest/
+
+obj-y += kernel/
+obj-y += mm/
+
+obj-y += crypto/
+obj-y += vdso/
+obj-$(CONFIG_IA32_EMULATION) += ia32/
+
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bc25b9f..3e0f80a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -47,6 +47,11 @@ config X86
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA

+config OUTPUT_FORMAT
+ string
+ default "elf32-i386" if X86_32
+ default "elf64-x86-64" if X86_64
+
config ARCH_DEFCONFIG
string
default "arch/x86/configs/i386_defconfig" if X86_32
@@ -1450,9 +1455,7 @@ config KEXEC_JUMP

config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x1000000" if X86_NUMAQ
- default "0x200000" if X86_64
- default "0x100000"
+ default "0x1000000"
---help---
This gives the physical address where the kernel is loaded.

@@ -1471,15 +1474,15 @@ config PHYSICAL_START
to be specifically compiled to run from a specific memory area
(normally a reserved region) and this option comes handy.

- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
+ So if you are using bzImage for capturing the crash dump,
+ leave the value here unchanged to 0x1000000 and set
+ CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux
+ for capturing the crash dump change this value to start of
+ the reserved region. In other words, it can be set based on
+ the "X" value as specified in the "crashkernel=YM@XM"
+ command line boot parameter passed to the panic-ed
+ kernel. Please take a look at Documentation/kdump/kdump.txt
+ for more details about crash dumps.

Usage of bzImage for capturing the crash dump is recommended as
one does not have to build two kernels. Same kernel can be used
@@ -1492,8 +1495,8 @@ config PHYSICAL_START
Don't change this unless you know what you are doing.

config RELOCATABLE
- bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Build a relocatable kernel"
+ default y
---help---
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
@@ -1508,12 +1511,16 @@ config RELOCATABLE
it has been loaded at and the compile time physical address
(CONFIG_PHYSICAL_START) is ignored.

+# Relocation on x86-32 needs some additional build support
+config X86_NEED_RELOCS
+ def_bool y
+ depends on X86_32 && RELOCATABLE
+
config PHYSICAL_ALIGN
hex
prompt "Alignment value to which kernel should be aligned" if X86_32
- default "0x100000" if X86_32
- default "0x200000" if X86_64
- range 0x2000 0x400000
+ default "0x1000000"
+ range 0x2000 0x1000000
---help---
This value puts the alignment restrictions on physical address
where kernel is loaded and run from. Kernel is compiled for an
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f05d8c9..e81f0b2 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -7,8 +7,6 @@ else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif

-core-$(CONFIG_KVM) += arch/x86/kvm/
-
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
@@ -118,21 +116,8 @@ head-y += arch/x86/kernel/init_task.o

libs-y += arch/x86/lib/

-# Sub architecture files that needs linking first
-core-y += $(fcore-y)
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-core-y += arch/x86/kernel/
-core-y += arch/x86/mm/
-
-core-y += arch/x86/crypto/
-core-y += arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+# See arch/x86/Kbuild for content of core part of the kernel
+core-y += arch/x86/

# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore
index 172cf8a..851fe93 100644
--- a/arch/x86/boot/.gitignore
+++ b/arch/x86/boot/.gitignore
@@ -3,6 +3,8 @@ bzImage
cpustr.h
mkcpustr
offsets.h
+voffset.h
+zoffset.h
setup
setup.bin
setup.elf
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 6633b6e..619d297 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -86,19 +86,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE

SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))

-sed-offsets := -e 's/^00*/0/' \
- -e 's/^$[0-9a-fA-F]*$ . $input_data\|input_data_end$$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^$[0-9a-fA-F]*$ . $_text\|_end$$$/\#define VO_\2 0x\1/p'

-quiet_cmd_offsets = OFFSETS $@
- cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+ cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@

-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+ $(call if_changed,voffset)
+
+sed-zoffset := -e 's/^$[0-9a-fA-F]*$ . $startup_32\|input_data\|_end\|z_.*$$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,zoffset)

-targets += offsets.h

AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h

LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 63eff3b..4a46fab 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -1,3 +1,6 @@
relocs
vmlinux.bin.all
vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 65551c9..49c8a4c 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -19,7 +19,9 @@ KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
LDFLAGS := -m elf_$(UTS_MACHINE)
LDFLAGS_vmlinux := -T

-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y := mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:

@@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE

targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs

quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
$(call if_changed,relocs)

vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD $@
- cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
- $(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs

-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T

-else
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA) := lzma

-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+ cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )

-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+ $(call if_changed,mkpiggy)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 3a8a866..75e4f00 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -12,16 +12,16 @@
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
- * Page 0 is deliberately kept safe, since System Management Mode code in
+ * Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
+ * useful for future device drivers that either access the BIOS via VM86
* mode.
*/

/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.text
+ .text

#include <linux/linkage.h>
#include <asm/segment.h>
@@ -29,161 +29,151 @@
#include <asm/boot.h>
#include <asm/asm-offsets.h>

-.section ".text.head","ax",@progbits
+ .section ".text.head","ax",@progbits
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
- testb $(1<<6), BP_loadflags(%esi)
- jnz 1f
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 1f

cli
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
- movl %eax,%ss
+ movl $__BOOT_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ movl %eax, %ss
1:

-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
+ leal (BP_scratch+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp

-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/

#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+ movl %ebp, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $LOAD_PHYSICAL_ADDR, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif

- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack */
- addl $(32768 + 18), %ebx
- /* Align on a 4K boundary */
- addl $4095, %ebx
- andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
+
+ /* Set up the stack */
+ leal boot_stack_end(%ebx), %esp
+
+ /* Zero EFLAGS */
+ pushl $0
+ popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- pushl %esi
- leal _end(%ebp), %esi
- leal _end(%ebx), %edi
- movl $(_end - startup_32), %ecx
+ pushl %esi
+ leal (_bss-4)(%ebp), %esi
+ leal (_bss-4)(%ebx), %edi
+ movl $(_bss - startup_32), %ecx
+ shrl $2, %ecx
std
- rep
- movsb
+ rep movsl
cld
- popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebp
-#endif
+ popl %esi

/*
* Jump to the relocated address.
*/
- leal relocated(%ebx), %eax
- jmp *%eax
+ leal relocated(%ebx), %eax
+ jmp *%eax
ENDPROC(startup_32)

-.section ".text"
+ .text
relocated:

/*
- * Clear BSS
- */
- xorl %eax,%eax
- leal _edata(%ebx),%edi
- leal _end(%ebx), %ecx
- subl %edi,%ecx
- cld
- rep
- stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
*/
- leal boot_stack_end(%ebx), %esp
+ xorl %eax, %eax
+ leal _bss(%ebx), %edi
+ leal _ebss(%ebx), %ecx
+ subl %edi, %ecx
+ shrl $2, %ecx
+ rep stosl

/*
* Do the decompression, and jump to the new kernel..
*/
- movl output_len(%ebx), %eax
- pushl %eax
- # push arguments for decompress_kernel:
- pushl %ebp # output address
- movl input_len(%ebx), %eax
- pushl %eax # input_len
- leal input_data(%ebx), %eax
- pushl %eax # input_data
- leal boot_heap(%ebx), %eax
- pushl %eax # heap area
- pushl %esi # real mode pointer
- call decompress_kernel
- addl $20, %esp
- popl %ecx
+ leal z_extract_offset_negative(%ebx), %ebp
+ /* push arguments for decompress_kernel: */
+ pushl %ebp /* output address */
+ pushl $z_input_len /* input_len */
+ leal input_data(%ebx), %eax
+ pushl %eax /* input_data */
+ leal boot_heap(%ebx), %eax
+ pushl %eax /* heap area */
+ pushl %esi /* real mode pointer */
+ call decompress_kernel
+ addl $20, %esp

#if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
*/
- movl %ebp, %edi
- addl %ecx, %edi
+ leal z_output_len(%ebp), %edi

-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
* and where it was actually loaded.
*/
- movl %ebp, %ebx
- subl $LOAD_PHYSICAL_ADDR, %ebx
- jz 2f /* Nothing to be done if loaded at compiled addr. */
+ movl %ebp, %ebx
+ subl $LOAD_PHYSICAL_ADDR, %ebx
+ jz 2f /* Nothing to be done if loaded at compiled addr. */
/*
* Process relocations.
*/

-1: subl $4, %edi
- movl 0(%edi), %ecx
- testl %ecx, %ecx
- jz 2f
- addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
- jmp 1b
+1: subl $4, %edi
+ movl (%edi), %ecx
+ testl %ecx, %ecx
+ jz 2f
+ addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+ jmp 1b
2:
#endif

/*
* Jump to the decompressed kernel.
*/
- xorl %ebx,%ebx
- jmp *%ebp
+ xorl %ebx, %ebx
+ jmp *%ebp

-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index ed4a829..f62c284 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -21,8 +21,8 @@
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.code32
-.text
+ .code32
+ .text

#include <linux/linkage.h>
#include <asm/segment.h>
@@ -33,12 +33,14 @@
#include <asm/processor-flags.h>
#include <asm/asm-offsets.h>

-.section ".text.head"
+ .section ".text.head"
.code32
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
testb $(1<<6), BP_loadflags(%esi)
jnz 1f

@@ -49,14 +51,15 @@ ENTRY(startup_32)
movl %eax, %ss
1:

-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
+ leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
@@ -70,32 +73,28 @@ ENTRY(startup_32)
testl %eax, %eax
jnz no_longmode

-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
* and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/

#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
- addl $(PMD_PAGE_SIZE -1), %ebx
- andl $PMD_PAGE_MASK, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $CONFIG_PHYSICAL_START, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif

- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx

/*
* Prepare for entering 64 bit mode
@@ -114,7 +113,7 @@ ENTRY(startup_32)
/*
* Build early 4G boot pagetable
*/
- /* Initialize Page tables to 0*/
+ /* Initialize Page tables to 0 */
leal pgtable(%ebx), %edi
xorl %eax, %eax
movl $((4096*6)/4), %ecx
@@ -155,7 +154,8 @@ ENTRY(startup_32)
btsl $_EFER_LME, %eax
wrmsr

- /* Setup for the jump to 64bit mode
+ /*
+ * Setup for the jump to 64bit mode
*
* When the jump is performend we will be in long mode but
* in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
@@ -184,7 +184,8 @@ no_longmode:

#include "../../kernel/verify_cpu_64.S"

- /* Be careful here startup_64 needs to be at a predictable
+ /*
+ * Be careful here startup_64 needs to be at a predictable
* address so I can export it in an ELF header. Bootloaders
* should look at the ELF header to find this address, as
* it may change in the future.
@@ -192,7 +193,8 @@ no_longmode:
.code64
.org 0x200
ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
+ /*
+ * We come here either from startup_32 or directly from a
* 64bit bootloader. If we come here from a bootloader we depend on
* an identity mapped page table being provied that maps our
* entire text+data+bss and hopefully all of memory.
@@ -209,50 +211,54 @@ ENTRY(startup_64)
movl $0x20, %eax
ltr %ax

- /* Compute the decompressed kernel start address. It is where
+ /*
+ * Compute the decompressed kernel start address. It is where
* we were loaded at aligned to a 2M boundary. %rbp contains the
* decompressed kernel start address.
*
* If it is a relocatable kernel then decompress and run the kernel
* from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
+ * run the kernel from LOAD_PHYSICAL_ADDR
+ *
+ * We cannot rely on the calculation done in 32-bit mode, since we
+ * may have been invoked via the 64-bit entry point.
*/

/* Start with the delta to where the kernel will run at. */
#ifdef CONFIG_RELOCATABLE
leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(PMD_PAGE_SIZE - 1), %rbp
- andq $PMD_PAGE_MASK, %rbp
- movq %rbp, %rbx
+ movl BP_kernel_alignment(%rsi), %eax
+ decl %eax
+ addq %rax, %rbp
+ notq %rax
+ andq %rax, %rbp
#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
+ movq $LOAD_PHYSICAL_ADDR, %rbp
#endif

- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ leaq z_extract_offset(%rbp), %rbx
+
+ /* Set up the stack */
+ leaq boot_stack_end(%rbx), %rsp
+
+ /* Zero EFLAGS */
+ pushq $0
+ popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- leaq _end_before_pgt(%rip), %r8
- leaq _end_before_pgt(%rbx), %r9
- movq $_end_before_pgt /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
+ pushq %rsi
+ leaq (_bss-8)(%rip), %rsi
+ leaq (_bss-8)(%rbx), %rdi
+ movq $_bss /* - $startup_32 */, %rcx
+ shrq $3, %rcx
+ std
+ rep movsq
+ cld
+ popq %rsi

/*
* Jump to the relocated address.
@@ -260,37 +266,28 @@ ENTRY(startup_64)
leaq relocated(%rbx), %rax
jmp *%rax

-.section ".text"
+ .text
relocated:

/*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
*/
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end_before_pgt(%rbx), %rcx
+ xorl %eax, %eax
+ leaq _bss(%rip), %rdi
+ leaq _ebss(%rip), %rcx
subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq boot_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
+ shrq $3, %rcx
+ rep stosq

/*
* Do the decompression, and jump to the new kernel..
*/
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq boot_heap(%rip), %rsi # malloc area for uncompression
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
+ pushq %rsi /* Save the real mode argument */
+ movq %rsi, %rdi /* real mode address */
+ leaq boot_heap(%rip), %rsi /* malloc area for uncompression */
+ leaq input_data(%rip), %rdx /* input_data */
+ movl $z_input_len, %ecx /* input_len */
+ movq %rbp, %r8 /* output target address */
call decompress_kernel
popq %rsi

@@ -311,11 +308,21 @@ gdt:
.quad 0x0000000000000000 /* TS continued */
gdt_end:

-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+ .section ".pgtable","a",@nobits
+ .balign 4096
+pgtable:
+ .fill 6*4096, 1, 0
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index e45be73..842b2a3 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;

+ if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+ error("Destination address inappropriately aligned");
#ifdef CONFIG_X86_64
- if ((unsigned long)output & (__KERNEL_ALIGN - 1))
- error("Destination address not 2M aligned");
- if ((unsigned long)output >= 0xffffffffffUL)
+ if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
- error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
error("Destination address too large");
+#endif
#ifndef CONFIG_RELOCATABLE
- if ((u32)output != LOAD_PHYSICAL_ADDR)
+ if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
error("Wrong destination address");
#endif
-#endif

if (!quiet)
putstr("\nDecompressing Linux... ");
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
new file mode 100644
index 0000000..bcbd36c
--- /dev/null
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -0,0 +1,97 @@
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+ const uint8_t *cp = p;
+
+ return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+ ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+ uint32_t olen;
+ long ilen;
+ unsigned long offs;
+ FILE *f;
+
+ if (argc < 2) {
+ fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+ return 1;
+ }
+
+ /* Get the information for the compressed kernel image first */
+
+ f = fopen(argv[1], "r");
+ if (!f) {
+ perror(argv[1]);
+ return 1;
+ }
+
+
+ if (fseek(f, -4L, SEEK_END)) {
+ perror(argv[1]);
+ }
+ fread(&olen, sizeof olen, 1, f);
+ ilen = ftell(f);
+ olen = getle32(&olen);
+ fclose(f);
+
+ /*
+ * Now we have the input (compressed) and output (uncompressed)
+ * sizes, compute the necessary decompression offset...
+ */
+
+ offs = (olen > ilen) ? olen - ilen : 0;
+ offs += olen >> 12; /* Add 8 bytes for each 32K block */
+ offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */
+ offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+ printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+ printf(".globl z_input_len\n");
+ printf("z_input_len = %lu\n", ilen);
+ printf(".globl z_output_len\n");
+ printf("z_output_len = %lu\n", (unsigned long)olen);
+ printf(".globl z_extract_offset\n");
+ printf("z_extract_offset = 0x%lx\n", offs);
+ /* z_extract_offset_negative allows simplification of head_32.S */
+ printf(".globl z_extract_offset_negative\n");
+ printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+ printf(".globl input_data, input_data_end\n");
+ printf("input_data:\n");
+ printf(".incbin \"%s\"\n", argv[1]);
+ printf("input_data_end:\n");
+
+ return 0;
+}
diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S
similarity index 57%
rename from arch/x86/boot/compressed/vmlinux_64.lds
rename to arch/x86/boot/compressed/vmlinux.lds.S
index bef1ac8..cc353e1 100644
--- a/arch/x86/boot/compressed/vmlinux_64.lds
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,6 +1,17 @@
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
OUTPUT_ARCH(i386:x86-64)
ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
SECTIONS
{
/* Be careful parts of head_64.S assume startup_32 is at
@@ -33,16 +44,22 @@ SECTIONS
*(.data.*)
_edata = . ;
}
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.bss : {
_bss = . ;
*(.bss)
*(.bss.*)
*(COMMON)
- . = ALIGN(8);
- _end_before_pgt = . ;
- . = ALIGN(4096);
- pgtable = . ;
- . = . + 4096 * 6;
+ . = ALIGN(8); /* For convenience during zeroing */
_ebss = .;
}
+#ifdef CONFIG_X86_64
+ . = ALIGN(PAGE_SIZE);
+ .pgtable : {
+ _pgtable = . ;
+ *(.pgtable)
+ _epgtable = . ;
+ }
+#endif
+ _end = .;
}
diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr
deleted file mode 100644
index f02382a..0000000
--- a/arch/x86/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
- .rodata.compressed : {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds
deleted file mode 100644
index bb3c483..0000000
--- a/arch/x86/boot/compressed/vmlinux_32.lds
+++ /dev/null
@@ -1,43 +0,0 @@
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
- /* Be careful parts of head_32.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text.head : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- }
- .rodata.compressed : {
- *(.rodata.compressed)
- }
- .text : {
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- _end = . ;
- }
-}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 5d84d1c..1040f6e 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,7 +22,8 @@
#include <asm/page_types.h>
#include <asm/setup.h>
#include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"

BOOTSEG = 0x07C0 /* original address of boot-sector */
SYSSEG = 0x1000 /* historical load address >> 4 */
@@ -115,7 +116,7 @@ _start:
# Part 2 of the header, from the old setup.S

.ascii "HdrS" # header signature
- .word 0x0209 # header version number (>= 0x0105)
+ .word 0x020a # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@@ -168,7 +169,11 @@ heap_end_ptr: .word _end+STACK_SIZE-512
# end of setup code can be used by setup
# for local heap purposes.

-pad1: .word 0
+ext_loader_ver:
+ .byte 0 # Extended boot loader version
+ext_loader_type:
+ .byte 0 # Extended boot loader type
+
cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
# If nonzero, a 32-bit pointer
# to the kernel command line.
@@ -200,7 +205,7 @@ relocatable_kernel: .byte 1
#else
relocatable_kernel: .byte 0
#endif
-pad2: .byte 0
+min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
pad3: .word 0

cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
@@ -212,13 +217,24 @@ hardware_subarch: .long 0 # subarchitecture, added with 2.07

hardware_subarch_data: .quad 0

-payload_offset: .long input_data
-payload_length: .long input_data_end-input_data
+payload_offset: .long ZO_input_data
+payload_length: .long ZO_z_input_len

setup_data: .quad 0 # 64-bit physical pointer to
# single linked list of
# struct setup_data

+pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE (VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size: .long INIT_SIZE # kernel initialization size
+
# End of setup header #####################################################

.section ".inittext", "ax"
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 235b81d..edb992e 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:50:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:21:55 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -33,6 +34,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -40,15 +42,16 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
+CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

@@ -60,10 +63,17 @@ CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
@@ -113,23 +123,26 @@ CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -139,6 +152,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -154,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -167,7 +183,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

@@ -194,12 +209,12 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
@@ -230,8 +245,10 @@ CONFIG_M686=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
@@ -247,7 +264,7 @@ CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
@@ -279,6 +296,7 @@ CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
@@ -302,6 +320,8 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
@@ -312,6 +332,7 @@ CONFIG_MTRR=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
@@ -322,8 +343,9 @@ CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_X86_NEED_RELOCS=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -363,7 +385,6 @@ CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
@@ -425,6 +446,7 @@ CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
@@ -435,6 +457,7 @@ CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
@@ -481,7 +504,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -639,6 +661,7 @@ CONFIG_LLC=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y

#
@@ -696,6 +719,7 @@ CONFIG_NET_SCH_FIFO=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
@@ -706,12 +730,10 @@ CONFIG_HAMRADIO=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
@@ -789,6 +811,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
@@ -842,6 +865,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
@@ -940,6 +964,7 @@ CONFIG_DM_ZERO=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -977,6 +1002,8 @@ CONFIG_MII=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
@@ -1026,6 +1053,7 @@ CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -1040,6 +1068,7 @@ CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -1049,6 +1078,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -1058,6 +1088,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
@@ -1073,8 +1104,8 @@ CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
@@ -1084,21 +1115,21 @@ CONFIG_WLAN_80211=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1209,6 +1240,8 @@ CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@@ -1303,6 +1336,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
@@ -1390,7 +1424,6 @@ CONFIG_I2C_I801=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1424,6 +1457,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1433,6 +1467,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
@@ -1448,11 +1483,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1643,7 +1681,6 @@ CONFIG_FB_EFI=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
@@ -1652,6 +1689,7 @@ CONFIG_FB_EFI=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -1738,6 +1776,8 @@ CONFIG_SND_PCI=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1811,15 +1851,17 @@ CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1885,11 +1927,11 @@ CONFIG_USB_PRINTER=y
# CONFIG_USB_TMC is not set

#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1931,7 +1973,6 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1947,6 +1988,7 @@ CONFIG_USB_LIBUSUAL=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1958,8 +2000,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
@@ -1969,6 +2013,10 @@ CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
@@ -2037,6 +2085,7 @@ CONFIG_DMADEVICES=y
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
@@ -2071,6 +2120,7 @@ CONFIG_DMIID=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
@@ -2101,6 +2151,11 @@ CONFIG_AUTOFS4_FS=y
CONFIG_GENERIC_ACL=y

#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
@@ -2151,6 +2206,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -2164,7 +2220,6 @@ CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -2251,6 +2306,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
@@ -2266,6 +2322,7 @@ CONFIG_TIMER_STATS=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
@@ -2289,13 +2346,19 @@ CONFIG_FRAME_POINTER=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y

#
# Tracers
@@ -2305,13 +2368,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -2321,7 +2392,6 @@ CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
@@ -2329,7 +2399,7 @@ CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2365,6 +2435,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
@@ -2380,10 +2452,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
@@ -2456,6 +2530,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
@@ -2467,11 +2542,13 @@ CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y

#
# Library routines
@@ -2489,7 +2566,10 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 9fe5d21..4ba7d4e 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:44:16 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:22:00 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
@@ -34,6 +35,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -41,14 +43,14 @@ CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -61,10 +63,17 @@ CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
@@ -114,23 +123,26 @@ CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -140,6 +152,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -155,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -167,7 +182,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
@@ -196,11 +210,10 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
+# CONFIG_X86_UV is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
@@ -230,10 +243,10 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
@@ -242,7 +255,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_CPU_SUP_CENTAUR=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
@@ -269,6 +282,7 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
@@ -276,6 +290,7 @@ CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
@@ -309,6 +324,8 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
@@ -317,6 +334,7 @@ CONFIG_MTRR=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
@@ -325,9 +343,10 @@ CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -370,7 +389,6 @@ CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
@@ -436,6 +454,7 @@ CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
@@ -481,7 +500,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -639,6 +657,7 @@ CONFIG_LLC=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y

#
@@ -696,6 +715,7 @@ CONFIG_NET_SCH_FIFO=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y

#
@@ -706,12 +726,10 @@ CONFIG_HAMRADIO=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
@@ -788,9 +806,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
-# CONFIG_SGI_GRU is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
@@ -844,6 +861,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
@@ -940,6 +958,7 @@ CONFIG_DM_ZERO=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -977,6 +996,8 @@ CONFIG_MII=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
@@ -1026,6 +1047,7 @@ CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -1040,6 +1062,7 @@ CONFIG_TIGON3=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -1049,6 +1072,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -1058,6 +1082,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
@@ -1072,8 +1097,8 @@ CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
@@ -1083,21 +1108,21 @@ CONFIG_WLAN_80211=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1208,6 +1233,8 @@ CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@@ -1301,6 +1328,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
@@ -1382,7 +1410,6 @@ CONFIG_I2C_I801=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1416,6 +1443,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1425,6 +1453,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
@@ -1440,11 +1469,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1635,6 +1667,7 @@ CONFIG_FB_EFI=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -1720,6 +1753,8 @@ CONFIG_SND_PCI=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1792,15 +1827,17 @@ CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1866,11 +1903,11 @@ CONFIG_USB_PRINTER=y
# CONFIG_USB_TMC is not set

#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1912,7 +1949,6 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1928,6 +1964,7 @@ CONFIG_USB_LIBUSUAL=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1939,8 +1976,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
@@ -1950,6 +1989,10 @@ CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
@@ -2018,6 +2061,7 @@ CONFIG_DMADEVICES=y
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
@@ -2051,6 +2095,7 @@ CONFIG_DMIID=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
@@ -2082,6 +2127,11 @@ CONFIG_AUTOFS4_FS=y
CONFIG_GENERIC_ACL=y

#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
@@ -2132,6 +2182,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -2145,7 +2196,6 @@ CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -2232,6 +2282,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
@@ -2247,6 +2298,7 @@ CONFIG_TIMER_STATS=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
@@ -2269,13 +2321,19 @@ CONFIG_FRAME_POINTER=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y

#
# Tracers
@@ -2285,13 +2343,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -2301,14 +2367,13 @@ CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2344,6 +2409,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
@@ -2359,10 +2426,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
@@ -2414,6 +2483,7 @@ CONFIG_CRYPTO_SHA1=y
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -2435,6 +2505,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
@@ -2444,10 +2515,12 @@ CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y

#
# Library routines
@@ -2464,7 +2537,10 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 6ba23dd..418e632 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,11 +8,26 @@

#ifdef __KERNEL__

+#include <asm/page_types.h>
+
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+ (CONFIG_PHYSICAL_ALIGN - 1)) \
& ~(CONFIG_PHYSICAL_ALIGN - 1))

+/* Minimum kernel alignment, as a power of two */
+#ifdef CONFIG_x86_64
+#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
+#else
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#endif
+#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
+
+#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
+ (CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
+#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+#endif
+
#ifdef CONFIG_KERNEL_BZIP2
#define BOOT_HEAP_SIZE 0x400000
#else /* !CONFIG_KERNEL_BZIP2 */
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 433adae..1724e8d 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -50,7 +50,8 @@ struct setup_header {
__u32 ramdisk_size;
__u32 bootsect_kludge;
__u16 heap_end_ptr;
- __u16 _pad1;
+ __u8 ext_loader_ver;
+ __u8 ext_loader_type;
__u32 cmd_line_ptr;
__u32 initrd_addr_max;
__u32 kernel_alignment;
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index d38c91b..e11900f 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -32,17 +32,9 @@
*/
#define __PAGE_OFFSET _AC(0xffff880000000000, UL)

-#define __PHYSICAL_START CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN 0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
+#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \
+ (CONFIG_PHYSICAL_ALIGN - 1)) & \
+ ~(CONFIG_PHYSICAL_ALIGN - 1))

#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fcf4d92..6384d25 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -814,6 +814,7 @@ extern unsigned int BIOS_revision;

/* Boot loader type from the setup header: */
extern int bootloader_type;
+extern int bootloader_version;

extern char ignore_fpu_irq;

diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 5a6aa1c..1a830cb 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -146,4 +146,5 @@ void foo(void)
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
+ OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
}
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index e72f062..898ecc4 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -125,6 +125,7 @@ int main(void)
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
+ OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);

BLANK();
DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 3068388..dc5ed4b 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -608,13 +608,6 @@ ignore_int:
ENTRY(initial_code)
.long i386_start_kernel

-.section .text
-/*
- * Real beginning of normal "text" segment
- */
-ENTRY(stext)
-ENTRY(_stext)
-
/*
* BSS section
*/
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b415843..2b09345 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -214,8 +214,8 @@ unsigned long mmu_cr4_features;
unsigned long mmu_cr4_features = X86_CR4_PAE;
#endif

-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
+/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
+int bootloader_type, bootloader_version;

/*
* Setup options
@@ -706,6 +706,12 @@ void __init setup_arch(char **cmdline_p)
#endif
saved_video_mode = boot_params.hdr.vid_mode;
bootloader_type = boot_params.hdr.type_of_loader;
+ if ((bootloader_type >> 4) == 0xe) {
+ bootloader_type &= 0xf;
+ bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
+ }
+ bootloader_version = bootloader_type & 0xf;
+ bootloader_version |= boot_params.hdr.ext_loader_ver << 4;

#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 849ee61..4c85b2e 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -1,5 +1,431 @@
+/*
+ * ld script for the x86 kernel
+ *
+ * Historic 32-bit version written by Martin Mares <mj@xxxxxxxxxxxxxxxxxxxxxxxx>
+ *
+ * Modernisation, unification and other changes and fixes:
+ * Copyright (C) 2007-2009 Sam Ravnborg <sam@xxxxxxxxxxxx>
+ *
+ *
+ * Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
+ */
+
#ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
+#define LOAD_OFFSET __PAGE_OFFSET
#else
-# include "vmlinux_64.lds.S"
+#define LOAD_OFFSET __START_KERNEL_map
#endif
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page_types.h>
+#include <asm/cache.h>
+#include <asm/boot.h>
+
+#undef i386 /* in case the preprocessor is a 32bit one */
+
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#ifdef CONFIG_X86_32
+OUTPUT_ARCH(i386)
+ENTRY(phys_startup_32)
+jiffies = jiffies_64;
+#else
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(phys_startup_64)
+jiffies_64 = jiffies;
+#endif
+
+PHDRS {
+ text PT_LOAD FLAGS(5); /* R_E */
+ data PT_LOAD FLAGS(7); /* RWE */
+#ifdef CONFIG_X86_64
+ user PT_LOAD FLAGS(7); /* RWE */
+ data.init PT_LOAD FLAGS(7); /* RWE */
+#ifdef CONFIG_SMP
+ percpu PT_LOAD FLAGS(7); /* RWE */
+#endif
+ data.init2 PT_LOAD FLAGS(7); /* RWE */
+#endif
+ note PT_NOTE FLAGS(0); /* ___ */
+}
+
+SECTIONS
+{
+#ifdef CONFIG_X86_32
+ . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+ phys_startup_32 = startup_32 - LOAD_OFFSET;
+#else
+ . = __START_KERNEL;
+ phys_startup_64 = startup_64 - LOAD_OFFSET;
+#endif
+
+ /* Text and read-only data */
+
+ /* bootstrapping code */
+ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+ _text = .;
+ *(.text.head)
+ } :text = 0x9090
+
+ /* The rest of the text */
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+#ifdef CONFIG_X86_32
+ /* not really needed, already page aligned */
+ . = ALIGN(PAGE_SIZE);
+ *(.text.page_aligned)
+#endif
+ . = ALIGN(8);
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ /* End of text section */
+ _etext = .;
+ } :text = 0x9090
+
+ NOTES :text :note
+
+ /* Exception table */
+ . = ALIGN(16);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ } :text = 0x9090
+
+ RODATA
+
+ /* Data */
+ . = ALIGN(PAGE_SIZE);
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
+ DATA_DATA
+ CONSTRUCTORS
+
+#ifdef CONFIG_X86_64
+ /* End of data section */
+ _edata = .;
+#endif
+ } :data
+
+#ifdef CONFIG_X86_32
+ /* 32 bit has nosave before _edata */
+ . = ALIGN(PAGE_SIZE);
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ *(.data.page_aligned)
+ *(.data.idt)
+ }
+
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(PAGE_SIZE);
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+#endif
+ .data.cacheline_aligned :
+ AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ *(.data.cacheline_aligned)
+ }
+
+ /* rarely changed data like cpu maps */
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
+#endif
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
+
+#ifdef CONFIG_X86_32
+ /* End of data section */
+ _edata = .;
+#endif
+ }
+
+#ifdef CONFIG_X86_64
+
+#define VSYSCALL_ADDR (-10*1024*1024)
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+
+#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
+
+#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
+
+ . = VSYSCALL_ADDR;
+ .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+ *(.vsyscall_0)
+ } :user
+
+ __vsyscall_0 = VSYSCALL_VIRT_ADDR;
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
+ *(.vsyscall_fn)
+ }
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
+ *(.vsyscall_gtod_data)
+ }
+
+ vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
+ .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) {
+ *(.vsyscall_clock)
+ }
+ vsyscall_clock = VVIRT(.vsyscall_clock);
+
+
+ .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) {
+ *(.vsyscall_1)
+ }
+ .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) {
+ *(.vsyscall_2)
+ }
+
+ .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) {
+ *(.vgetcpu_mode)
+ }
+ vgetcpu_mode = VVIRT(.vgetcpu_mode);
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .jiffies : AT(VLOAD(.jiffies)) {
+ *(.jiffies)
+ }
+ jiffies = VVIRT(.jiffies);
+
+ .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
+ *(.vsyscall_3)
+ }
+
+ . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+
+#undef VSYSCALL_ADDR
+#undef VSYSCALL_PHYS_ADDR
+#undef VSYSCALL_VIRT_ADDR
+#undef VLOAD_OFFSET
+#undef VLOAD
+#undef VVIRT_OFFSET
+#undef VVIRT
+
+#endif /* CONFIG_X86_64 */
+
+ /* init_task */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
+#ifdef CONFIG_X86_64
+ :data.init
+#endif
+
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
+ .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+ __parainstructions = .;
+ *(.parainstructions)
+ __parainstructions_end = .;
+ }
+
+ . = ALIGN(8);
+ .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+
+ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ *(.altinstr_replacement)
+ }
+
+ /*
+ * .exit.text is discard at runtime, not link time, to deal with
+ * references from .altinstructions and .eh_frame
+ */
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ EXIT_TEXT
+ }
+
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+ EXIT_DATA
+ }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
+ /*
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - __data_nosave - should
+ * start another section data.init2. Also, pda should be at the head of
+ * percpu area. Preallocate it and define the percpu offset symbol
+ * so that it can be accessed as a percpu variable.
+ */
+ . = ALIGN(PAGE_SIZE);
+ PERCPU_VADDR(0, :percpu)
+#else
+ PERCPU(PAGE_SIZE)
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+
+ /* freed after init ends here */
+ .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
+ __init_end = .;
+ }
+
+#ifdef CONFIG_X86_64
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ . = ALIGN(PAGE_SIZE);
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ } :data.init2
+ /* use another section data.init2, see PERCPU_VADDR() above */
+#endif
+
+ /* BSS */
+ . = ALIGN(PAGE_SIZE);
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __bss_start = .;
+ *(.bss.page_aligned)
+ *(.bss)
+ . = ALIGN(4);
+ __bss_stop = .;
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+ __brk_base = .;
+ . += 64 * 1024; /* 64k alignment slop space */
+ *(.brk_reservation) /* areas brk users have reserved */
+ __brk_limit = .;
+ }
+
+ .end : AT(ADDR(.end) - LOAD_OFFSET) {
+ _end = .;
+ }
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.eh_frame)
+ *(.discard)
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+}
+
+
+#ifdef CONFIG_X86_32
+ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
+#else
+/*
+ * Per-cpu symbols which need to be offset from __per_cpu_load
+ * for the boot processor.
+ */
+#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+INIT_PER_CPU(gdt_page);
+INIT_PER_CPU(irq_stack_union);
+
+/*
+ * Build-time check on the image size:
+ */
+ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
+
+#ifdef CONFIG_SMP
+ASSERT((per_cpu__irq_stack_union == 0),
+ "irq_stack_union is not at start of per-cpu area");
+#endif
+
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big")
+#endif
+
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
deleted file mode 100644
index 62ad500..0000000
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ /dev/null
@@ -1,229 +0,0 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@xxxxxxxxxxxxxxxxxxxxxxxx>;
- *
- * Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-
-#define LOAD_OFFSET __PAGE_OFFSET
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/page_types.h>
-#include <asm/cache.h>
-#include <asm/boot.h>
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(phys_startup_32)
-jiffies = jiffies_64;
-
-PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
-}
-SECTIONS
-{
- . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
- phys_startup_32 = startup_32 - LOAD_OFFSET;
-
- .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- *(.text.head)
- } :text = 0x9090
-
- /* read-only */
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
- *(.text.page_aligned)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- /* writeable */
- . = ALIGN(PAGE_SIZE);
- .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
- DATA_DATA
- CONSTRUCTORS
- } :data
-
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
- *(.data.idt)
- }
-
- . = ALIGN(32);
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- _edata = .; /* End of data section */
- }
-
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
- }
-
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- }
- /* will be freed after init
- * Following ALIGN() is required to make sure no other data falls on the
- * same page where __smp_alt_end is pointing as that page might be freed
- * after boot. Always make sure that ALIGN() directive is present after
- * the section which contains __smp_alt_end.
- */
- . = ALIGN(PAGE_SIZE);
-
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
- . = ALIGN(4);
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- . = ALIGN(4);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
- PERCPU(PAGE_SIZE)
- . = ALIGN(PAGE_SIZE);
- /* freed after init ends here */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- . = ALIGN(4);
- __bss_stop = .;
- }
-
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
- }
-
- .end : AT(ADDR(.end) - LOAD_OFFSET) {
- _end = . ;
- }
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.discard)
- }
-
- STABS_DEBUG
-
- DWARF_DEBUG
-}
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_KEXEC
-/* Link time checks */
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
-#endif
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
deleted file mode 100644
index c874250..0000000
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ /dev/null
@@ -1,298 +0,0 @@
-/* ld script to make x86-64 Linux kernel
- * Written by Martin Mares <mj@xxxxxxxxxxxxxxxxxxxxxxxx>;
- */
-
-#define LOAD_OFFSET __START_KERNEL_map
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/asm-offsets.h>
-#include <asm/page_types.h>
-
-#undef i386 /* in case the preprocessor is a 32bit one */
-
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
-PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
-#ifdef CONFIG_SMP
- percpu PT_LOAD FLAGS(7); /* RWE */
-#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
-}
-SECTIONS
-{
- . = __START_KERNEL;
- phys_startup_64 = startup_64 - LOAD_OFFSET;
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- /* First the code that has to be first for bootstrapping */
- *(.text.head)
- _stext = .;
- /* Then the rest */
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */
- /* Data */
- .data : AT(ADDR(.data) - LOAD_OFFSET) {
- DATA_DATA
- CONSTRUCTORS
- _edata = .; /* End of data section */
- } :data
-
-
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- *(.data.cacheline_aligned)
- }
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- }
-
-#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
-#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
-
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
-#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
-
- . = VSYSCALL_ADDR;
- .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
- __vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) }
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data))
- { *(.vsyscall_gtod_data) }
- vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
- .vsyscall_clock : AT(VLOAD(.vsyscall_clock))
- { *(.vsyscall_clock) }
- vsyscall_clock = VVIRT(.vsyscall_clock);
-
-
- .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
- { *(.vsyscall_1) }
- .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
- { *(.vsyscall_2) }
-
- .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
- vgetcpu_mode = VVIRT(.vgetcpu_mode);
-
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
- jiffies = VVIRT(.jiffies);
-
- .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
- { *(.vsyscall_3) }
-
- . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
-
-#undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
-#undef VLOAD_OFFSET
-#undef VLOAD
-#undef VVIRT_OFFSET
-#undef VVIRT
-
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- . = ALIGN(THREAD_SIZE); /* init_task */
- *(.data.init_task)
- }:data.init
-
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- *(.data.page_aligned)
- }
-
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- __smp_alt_begin = .;
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- __smp_alt_end = .;
- }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .; /* paired with __init_end */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- __initdata_begin = .;
- INIT_DATA
- __initdata_end = .;
- }
-
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
-
- . = ALIGN(8);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
-
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- . = ALIGN(8);
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
-#ifdef CONFIG_SMP
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
- PERCPU(PAGE_SIZE)
-#endif
-
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- __bss_stop = .;
- }
-
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
- }
-
- _end = . ;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.eh_frame)
- *(.discard)
- }
-
- STABS_DEBUG
-
- DWARF_DEBUG
-}
-
- /*
- * Per-cpu symbols which need to be offset from __per_cpu_load
- * for the boot processor.
- */
-#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
-INIT_PER_CPU(gdt_page);
-INIT_PER_CPU(irq_stack_union);
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
- "irq_stack_union is not at start of per-cpu area");
-#endif
-
-#ifdef CONFIG_KEXEC
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
-#endif
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index e3d2c7d..cf91c93 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -729,6 +729,14 @@ static struct ctl_table kern_table[] = {
},
{
.ctl_name = CTL_UNNUMBERED,
+ .procname = "bootloader_version",
+ .data = &bootloader_version,
+ .maxlen = sizeof (int),
+ .mode = 0444,
+ .proc_handler = &proc_dointvec,
+ },
+ {
+ .ctl_name = CTL_UNNUMBERED,
.procname = "kstack_depth_to_print",
.data = &kstack_depth_to_print,
.maxlen = sizeof(int),
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 9796195..f8cf938 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -183,20 +183,34 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
# ---------------------------------------------------------------------------

quiet_cmd_gzip = GZIP $@
-cmd_gzip = gzip -f -9 < $< > $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \
+ (rm -f $@ ; false)

# Bzip2
# ---------------------------------------------------------------------------

-# Bzip2 does not include size in file... so we have to fake that
-size_append=$(CONFIG_SHELL) $(srctree)/scripts/bin_size
-
-quiet_cmd_bzip2 = BZIP2 $@
-cmd_bzip2 = (bzip2 -9 < $< && $(size_append) $<) > $@ || (rm -f $@ ; false)
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = echo -ne $(shell \
+dec_size=0; \
+for F in $1; do \
+ fsize=$$(stat -c "%s" $$F); \
+ dec_size=$$(expr $$dec_size + $$fsize); \
+done; \
+printf "%08x" $$dec_size | \
+ sed 's/$..$$..$$..$$..$/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
+)
+
+quiet_cmd_bzip2 = BZIP2 $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+ bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)

# Lzma
# ---------------------------------------------------------------------------

quiet_cmd_lzma = LZMA $@
-cmd_lzma = (lzma -9 -c $< && $(size_append) $<) >$@ || (rm -f $@ ; false)
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
diff --git a/scripts/bin_size b/scripts/bin_size
deleted file mode 100644
index 43e1b36..0000000
--- a/scripts/bin_size
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-if [ $# = 0 ] ; then
- echo Usage: $0 file
-fi
-
-size_dec=`stat -c "%s" $1`
-size_hex_echo_string=`printf "%08x" $size_dec |
- sed 's/$..$$..$$..$$..$/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'`
-/bin/echo -ne $size_hex_echo_string
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Stefan Schmidt: "Re: MSM6281 support was: HTC Dream aka. t-mobile g1 support"
Previous message: Ingo Molnar: "[GIT PULL] x86/fpu for v2.6.31"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]