Re: [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature

[Michael S. Zick]

On Fri June 12 2009, Harald Welte wrote:
> On Fri, Jun 12, 2009 at 06:46:45AM -0500, Michael S. Zick wrote:
> > > Temperature values are supposed to be expressed in millidegrees C, not
> > > degrees C as it seems to be doing (although 25 degrees C seems pretty
> > > low for a CPU temperature?) The drivers needs to multiply values by
> > > 1000 before exporting them to sysfs. Then "sensors" will report the
> > > correct temperature value.
> > > 
> > 
> > Ah, 25 degrees C is room temperature - real hard for the junction temperature
> > to be 25 degrees C with power applied; lacking an infinitely perfect heatsink.
> > 
> > Look for an "off by one" error in shifting or masking the value.
> 
> there is no shifting and the masking is 0xffffffff :)
> 
> it might be that the BIOS is doing something wrong when programming the
> calibration MSR's at early botoup.  I would need the contents of MSR 
> 0x1160 ... 0x116C as well as 0x1152 and 0x1153 to be able to determine that.
> 

I was commenting on someone else's observation - -
Will build with your patch and poke at it a bit.

I should be able to read those registers from /dev/cpu/0/msr, correct?
Or is there a "safe" mask in the msr driver that prevents reading random
MSR registers?

Mike
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/