Re: [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature

[Michael S. Zick]

On Fri June 12 2009, tomaz.mertelj@xxxxxxxxxxxxxx wrote:
> > On Fri June 12 2009, Michael S. Zick wrote:
> > 
> > And the output of sensors with H.W. driver built-in:
> > 
> > root@cb01:~# sensors
> > acpitz-virtual-0
> > Adapter: Virtual device
> > temp1:       +48.8ïC  (crit = +94.8ïC)
> > 
> > via-cputemp-isa-0000
> > Adapter: ISA adapter
> > Core 0:      +50.0ïC
> > 
> > Which looks reasonable to me, on this machine.
> > 
> > Mike 
> 
> On VIA VB7002  acpitz  obviously does not work so I can not compare. I 
> guess BIOS does not support the temperature reading since there is no 
> temperature readout in BIOS. 
> 
> acpitz-virtual-0
> Adapter: Virtual device
> temp1:      -247.7 C  (crit = +140.0 C)
> 
> via-cputemp-isa-0000
> Adapter: ISA adapter
> Core 0:      +27.0 C
> 
> Is there a way to reset the CPU temperature calibration to the factory 
> default?  
> 

There should be among those registers we dumped
for Harald.  He now has a good and a bad case to
look at - he also has access to the msr magic numbers.

Mike
> Tomaz Mertelj 
> 
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/