Re: [Ilw] iwlagn crash on 2.6.29.4

[Robby Workman]

On Fri, 12 Jun 2009, reinette chatre wrote:

> On Thu, 2009-06-11 at 22:51 -0700, Robby Workman wrote:
> > On 2.6.29.4, I just got a crash in iwlagn under heavy network
> > throughput.  I was transferring a dvd iso from one box in my
> > lan to another, and the following occurred:
> >
> >    http://slackware.com/~rworkman/OOPS
> >
> > It didn't bring the entire system to a halt (thankfully);
> > removing and reloading the iwlagn module made everything
> > just fine. :-)
> >
> > If any more information is needed, let me know.  I'm more than
> > willing to test patches and such...
>
> Which hardware are you using?

3:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
	Subsystem: Intel Corporation Device 1211
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: [c8] Power Management version 3
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [d0] MSI: Mask- 64bit+ Count=1/1 Enable+
		Address: 00000000fee0300c  Data: 41e1
	Capabilities: [e0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140] Device Serial Number 78-31-d5-ff-ff-fa-22-00
	Kernel driver in use: iwlagn
	Kernel modules: iwlagn


> We released new ucode for 4965, 5100, 5300, and 5350 that address this
> issue. The new 4965 ucode should work fine with your driver. If you are
> using later hardware then you need a more recent driver to be able to
> use its new ucode.
>
> You can download the new ucode from:
> http://intellinuxwireless.org/?n=Downloads


Best I can tell, I'll need 2.6.30 for the new 5100 firmware, as 2.6.29.4
doesn't seem to care that the newer firmware is present:

  root@liberty:~# ls /lib/firmware/iwlwifi-5000-*
  /lib/firmware/iwlwifi-5000-1.ucode  /lib/firmware/iwlwifi-5000-2.ucode

  ... and from dmesg:
  iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
  iwlagn loaded firmware version 5.4.1.16

I guess I'll have to wait a bit, as 2.6.30 is off the table for now.
No big deal - at least it's fixed, even if not for me yet.

Thanks!

-RW

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/