Re: [PATCH 1/3] [ARM] msm_serial: serial driver for MSM7K onboard serial peripheral.
From: Linus Walleij
Date: Mon Jun 15 2009 - 05:05:52 EST
Hi Brian, some comments:
2009/6/15 Brian Swetland <swetland@xxxxxxxxxx>:
> From: Robert Love <rlove@xxxxxxxxxx>
>
> Signed-off-by: Brian Swetland <swetland@xxxxxxxxxx>
> ---
> drivers/serial/Kconfig | 10 +
> drivers/serial/Makefile | 1 +
> drivers/serial/msm_serial.c | 767 +++++++++++++++++++++++++++++++++++++++++++
> drivers/serial/msm_serial.h | 117 +++++++
> include/linux/serial_core.h | 3 +
> 5 files changed, 898 insertions(+), 0 deletions(-)
> create mode 100644 drivers/serial/msm_serial.c
> create mode 100644 drivers/serial/msm_serial.h
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 1132c5c..037c1e0 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -1320,6 +1320,16 @@ config SERIAL_SGI_IOC3
> If you have an SGI Altix with an IOC3 serial card,
> say Y or M. Otherwise, say N.
>
> +config SERIAL_MSM
> + bool "MSM on-chip serial port support"
> + depends on ARM && ARCH_MSM
> + select SERIAL_CORE
> +
> +config SERIAL_MSM_CONSOLE
> + bool "MSM serial console support"
> + depends on SERIAL_MSM=y
> + select SERIAL_CORE_CONSOLE
> +
> config SERIAL_NETX
> tristate "NetX serial port support"
> depends on ARM && ARCH_NETX
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 45a8658..d5a2998 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
> obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
> obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
> obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
> +obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
> obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
> obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
> obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
> diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
> new file mode 100644
> index 0000000..1a7c856
> --- /dev/null
> +++ b/drivers/serial/msm_serial.c
> @@ -0,0 +1,767 @@
> +/*
> + * drivers/serial/msm_serial.c - driver for msm7k serial device and console
> + *
> + * Copyright (C) 2007 Google, Inc.
> + * Author: Robert Love <rlove@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
> +# define SUPPORT_SYSRQ
> +#endif
> +
> +#include <linux/hrtimer.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/irq.h>
> +#include <linux/init.h>
> +#include <linux/console.h>
> +#include <linux/tty.h>
> +#include <linux/tty_flip.h>
> +#include <linux/serial_core.h>
> +#include <linux/serial.h>
> +#include <linux/clk.h>
> +#include <linux/platform_device.h>
> +
> +#include "msm_serial.h"
> +
> +struct msm_port {
> + struct uart_port uart;
> + char name[16];
> + struct clk *clk;
> + unsigned int imr;
> +};
> +
> +#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port)
> +
> +static inline void msm_write(struct uart_port *port, unsigned int val,
> + unsigned int off)
> +{
> + __raw_writel(val, port->membase + off);
> +}
> +
> +static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
> +{
> + return __raw_readl(port->membase + off);
> +}
> +
> +static void msm_stop_tx(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + msm_port->imr &= ~UART_IMR_TXLEV;
> + msm_write(port, msm_port->imr, UART_IMR);
> +}
> +
> +static void msm_start_tx(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + msm_port->imr |= UART_IMR_TXLEV;
> + msm_write(port, msm_port->imr, UART_IMR);
> +}
> +
> +static void msm_stop_rx(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
> + msm_write(port, msm_port->imr, UART_IMR);
> +}
> +
> +static void msm_enable_ms(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + msm_port->imr |= UART_IMR_DELTA_CTS;
> + msm_write(port, msm_port->imr, UART_IMR);
> +}
> +
> +static void handle_rx(struct uart_port *port)
> +{
> + struct tty_struct *tty = port->info->port.tty;
> + unsigned int sr;
> +
> + /*
> + * Handle overrun. My understanding of the hardware is that overrun
> + * is not tied to the RX buffer, so we handle the case out of band.
> + */
> + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
> + port->icount.overrun++;
> + tty_insert_flip_char(tty, 0, TTY_OVERRUN);
> + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
> + }
> +
> + /* and now the main RX loop */
> + while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
> + unsigned int c;
> + char flag = TTY_NORMAL;
> +
> + c = msm_read(port, UART_RF);
> +
> + if (sr & UART_SR_RX_BREAK) {
> + port->icount.brk++;
> + if (uart_handle_break(port))
> + continue;
> + } else if (sr & UART_SR_PAR_FRAME_ERR) {
> + port->icount.frame++;
> + } else {
> + port->icount.rx++;
> + }
> +
> + /* Mask conditions we're ignorning. */
> + sr &= port->read_status_mask;
> +
> + if (sr & UART_SR_RX_BREAK) {
> + flag = TTY_BREAK;
> + } else if (sr & UART_SR_PAR_FRAME_ERR) {
> + flag = TTY_FRAME;
> + }
> +
> + if (!uart_handle_sysrq_char(port, c))
> + tty_insert_flip_char(tty, c, flag);
> + }
> +
> + tty_flip_buffer_push(tty);
> +}
> +
> +static void handle_tx(struct uart_port *port)
> +{
> + struct circ_buf *xmit = &port->info->xmit;
> + struct msm_port *msm_port = UART_TO_MSM(port);
> + int sent_tx;
> +
> + if (port->x_char) {
> + msm_write(port, port->x_char, UART_TF);
> + port->icount.tx++;
> + port->x_char = 0;
> + }
> +
> + while (msm_read(port, UART_SR) & UART_SR_TX_READY) {
> + if (uart_circ_empty(xmit)) {
> + /* disable tx interrupts */
> + msm_port->imr &= ~UART_IMR_TXLEV;
> + msm_write(port, msm_port->imr, UART_IMR);
> + break;
> + }
> +
> + msm_write(port, xmit->buf[xmit->tail], UART_TF);
> +
> + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
> + port->icount.tx++;
> + sent_tx = 1;
> + }
> +
> + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
> + uart_write_wakeup(port);
> +}
> +
> +static void handle_delta_cts(struct uart_port *port)
> +{
> + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
> + port->icount.cts++;
> + wake_up_interruptible(&port->info->delta_msr_wait);
> +}
> +
> +static irqreturn_t msm_irq(int irq, void *dev_id)
> +{
> + struct uart_port *port = dev_id;
> + struct msm_port *msm_port = UART_TO_MSM(port);
> + unsigned int misr;
> +
> + spin_lock(&port->lock);
> + misr = msm_read(port, UART_MISR);
> + msm_write(port, 0, UART_IMR); /* disable interrupt */
> +
> + if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE))
> + handle_rx(port);
> + if (misr & UART_IMR_TXLEV)
> + handle_tx(port);
> + if (misr & UART_IMR_DELTA_CTS)
> + handle_delta_cts(port);
> +
> + msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
> + spin_unlock(&port->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static unsigned int msm_tx_empty(struct uart_port *port)
> +{
> + return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
> +}
> +
> +static unsigned int msm_get_mctrl(struct uart_port *port)
> +{
> + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
> +}
> +
> +static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
> +{
> + unsigned int mr;
> +
> + mr = msm_read(port, UART_MR1);
> +
> + if (!(mctrl & TIOCM_RTS)) {
> + mr &= ~UART_MR1_RX_RDY_CTL;
> + msm_write(port, mr, UART_MR1);
> + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
> + } else {
> + mr |= UART_MR1_RX_RDY_CTL;
> + msm_write(port, mr, UART_MR1);
> + }
> +}
> +
> +static void msm_break_ctl(struct uart_port *port, int break_ctl)
> +{
> + if (break_ctl)
> + msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
> + else
> + msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
> +}
> +
> +static void msm_set_baud_rate(struct uart_port *port, unsigned int baud)
> +{
> + unsigned int baud_code, rxstale, watermark;
> +
> + switch (baud) {
> + case 300:
> + baud_code = UART_CSR_300;
> + rxstale = 1;
> + break;
> + case 600:
> + baud_code = UART_CSR_600;
> + rxstale = 1;
> + break;
> + case 1200:
> + baud_code = UART_CSR_1200;
> + rxstale = 1;
> + break;
> + case 2400:
> + baud_code = UART_CSR_2400;
> + rxstale = 1;
> + break;
> + case 4800:
> + baud_code = UART_CSR_4800;
> + rxstale = 1;
> + break;
> + case 9600:
> + baud_code = UART_CSR_9600;
> + rxstale = 2;
> + break;
> + case 14400:
> + baud_code = UART_CSR_14400;
> + rxstale = 3;
> + break;
> + case 19200:
> + baud_code = UART_CSR_19200;
> + rxstale = 4;
> + break;
> + case 28800:
> + baud_code = UART_CSR_28800;
> + rxstale = 6;
> + break;
> + case 38400:
> + baud_code = UART_CSR_38400;
> + rxstale = 8;
> + break;
> + case 57600:
> + baud_code = UART_CSR_57600;
> + rxstale = 16;
> + break;
> + case 115200:
> + default:
> + baud_code = UART_CSR_115200;
> + rxstale = 31;
> + break;
> + }
> +
> + msm_write(port, baud_code, UART_CSR);
> +
> + /* RX stale watermark */
> + watermark = UART_IPR_STALE_LSB & rxstale;
> + watermark |= UART_IPR_RXSTALE_LAST;
> + watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
> + msm_write(port, watermark, UART_IPR);
> +
> + /* set RX watermark */
> + watermark = (port->fifosize * 3) / 4;
> + msm_write(port, watermark, UART_RFWR);
> +
> + /* set TX watermark */
> + msm_write(port, 10, UART_TFWR);
> +}
> +
> +static void msm_reset(struct uart_port *port)
> +{
> + /* reset everything */
> + msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
> + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
> + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
> + msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
> + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
> + msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
> +}
> +
> +static void msm_init_clock(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + clk_enable(msm_port->clk);
> +
> + msm_write(port, 0xC0, UART_MREG);
> + msm_write(port, 0xB2, UART_NREG);
> + msm_write(port, 0x7D, UART_DREG);
> + msm_write(port, 0x1C, UART_MNDREG);
> +}
> +
> +static int msm_startup(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> + unsigned int data, rfr_level;
> + int ret;
> +
> + snprintf(msm_port->name, sizeof(msm_port->name),
> + "msm_serial%d", port->line);
Perhaps be sure that you terminate this string with
msm_port->name[sizeof(msm_port->name)-1] = '\0';
> +
> + ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
> + msm_port->name, port);
> + if (unlikely(ret))
> + return ret;
> +
> + msm_init_clock(port);
> +
> + if (likely(port->fifosize > 12))
> + rfr_level = port->fifosize - 12;
> + else
> + rfr_level = port->fifosize;
> +
> + /* set automatic RFR level */
> + data = msm_read(port, UART_MR1);
> + data &= ~UART_MR1_AUTO_RFR_LEVEL1;
> + data &= ~UART_MR1_AUTO_RFR_LEVEL0;
> + data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
> + data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
> + msm_write(port, data, UART_MR1);
> +
> + /* make sure that RXSTALE count is non-zero */
> + data = msm_read(port, UART_IPR);
> + if (unlikely(!data)) {
> + data |= UART_IPR_RXSTALE_LAST;
> + data |= UART_IPR_STALE_LSB;
> + msm_write(port, data, UART_IPR);
> + }
> +
> + msm_reset(port);
> +
> + msm_write(port, 0x05, UART_CR); /* enable TX & RX */
> +
> + /* turn on RX and CTS interrupts */
> + msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
> + UART_IMR_CURRENT_CTS;
> + msm_write(port, msm_port->imr, UART_IMR);
> +
> + return 0;
> +}
> +
> +static void msm_shutdown(struct uart_port *port)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + msm_port->imr = 0;
> + msm_write(port, 0, UART_IMR); /* disable interrupts */
> +
> + clk_disable(msm_port->clk);
> +
> + free_irq(port->irq, port);
> +}
> +
> +static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
> + struct ktermios *old)
> +{
> + unsigned long flags;
> + unsigned int baud, mr;
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + /* calculate and set baud rate */
> + baud = uart_get_baud_rate(port, termios, old, 300, 115200);
> + msm_set_baud_rate(port, baud);
> +
> + /* calculate parity */
> + mr = msm_read(port, UART_MR2);
> + mr &= ~UART_MR2_PARITY_MODE;
> + if (termios->c_cflag & PARENB) {
> + if (termios->c_cflag & PARODD)
> + mr |= UART_MR2_PARITY_MODE_ODD;
> + else if (termios->c_cflag & CMSPAR)
> + mr |= UART_MR2_PARITY_MODE_SPACE;
> + else
> + mr |= UART_MR2_PARITY_MODE_EVEN;
> + }
> +
> + /* calculate bits per char */
> + mr &= ~UART_MR2_BITS_PER_CHAR;
> + switch (termios->c_cflag & CSIZE) {
> + case CS5:
> + mr |= UART_MR2_BITS_PER_CHAR_5;
> + break;
> + case CS6:
> + mr |= UART_MR2_BITS_PER_CHAR_6;
> + break;
> + case CS7:
> + mr |= UART_MR2_BITS_PER_CHAR_7;
> + break;
> + case CS8:
> + default:
> + mr |= UART_MR2_BITS_PER_CHAR_8;
> + break;
> + }
> +
> + /* calculate stop bits */
> + mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
> + if (termios->c_cflag & CSTOPB)
> + mr |= UART_MR2_STOP_BIT_LEN_TWO;
> + else
> + mr |= UART_MR2_STOP_BIT_LEN_ONE;
> +
> + /* set parity, bits per char, and stop bit */
> + msm_write(port, mr, UART_MR2);
> +
> + /* calculate and set hardware flow control */
> + mr = msm_read(port, UART_MR1);
> + mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
> + if (termios->c_cflag & CRTSCTS) {
> + mr |= UART_MR1_CTS_CTL;
> + mr |= UART_MR1_RX_RDY_CTL;
> + }
> + msm_write(port, mr, UART_MR1);
> +
> + /* Configure status bits to ignore based on termio flags. */
> + port->read_status_mask = 0;
> + if (termios->c_iflag & INPCK)
> + port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
> + if (termios->c_iflag & (BRKINT | PARMRK))
> + port->read_status_mask |= UART_SR_RX_BREAK;
> +
> + uart_update_timeout(port, termios->c_cflag, baud);
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static const char *msm_type(struct uart_port *port)
> +{
> + return "MSM";
> +}
> +
> +static void msm_release_port(struct uart_port *port)
> +{
> + struct platform_device *pdev = to_platform_device(port->dev);
> + struct resource *resource;
> + resource_size_t size;
Remove size variable
> +
> + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (unlikely(!resource))
> + return;
> + size = resource->end - resource->start + 1;
Remove assignment
> +
> + release_mem_region(port->mapbase, size);
release_mem_region(port->mapbase, resource_size(resource));
> + iounmap(port->membase);
> + port->membase = NULL;
> +}
> +
> +static int msm_request_port(struct uart_port *port)
> +{
> + struct platform_device *pdev = to_platform_device(port->dev);
> + struct resource *resource;
> + resource_size_t size;
Hm here it may be warranted
> +
> + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (unlikely(!resource))
> + return -ENXIO;
> + size = resource->end - resource->start + 1;
size = resource_size(resource);
> +
> + if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial")))
> + return -EBUSY;
> +
> + port->membase = ioremap(port->mapbase, size);
> + if (!port->membase) {
> + release_mem_region(port->mapbase, size);
> + return -EBUSY;
> + }
> +
> + return 0;
> +}
> +
> +static void msm_config_port(struct uart_port *port, int flags)
> +{
> + if (flags & UART_CONFIG_TYPE) {
> + port->type = PORT_MSM;
> + msm_request_port(port);
> + }
> +}
> +
> +static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
> +{
> + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
> + return -EINVAL;
> + if (unlikely(port->irq != ser->irq))
> + return -EINVAL;
> + return 0;
> +}
> +
> +static void msm_power(struct uart_port *port, unsigned int state,
> + unsigned int oldstate)
> +{
> + struct msm_port *msm_port = UART_TO_MSM(port);
> +
> + switch (state) {
> + case 0:
> + clk_enable(msm_port->clk);
> + break;
> + case 3:
> + clk_disable(msm_port->clk);
> + break;
> + default:
> + printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state);
dev_err(port->dev, "unknown PM state...");
> + }
> +}
> +
> +static struct uart_ops msm_uart_pops = {
> + .tx_empty = msm_tx_empty,
> + .set_mctrl = msm_set_mctrl,
> + .get_mctrl = msm_get_mctrl,
> + .stop_tx = msm_stop_tx,
> + .start_tx = msm_start_tx,
> + .stop_rx = msm_stop_rx,
> + .enable_ms = msm_enable_ms,
> + .break_ctl = msm_break_ctl,
> + .startup = msm_startup,
> + .shutdown = msm_shutdown,
> + .set_termios = msm_set_termios,
> + .type = msm_type,
> + .release_port = msm_release_port,
> + .request_port = msm_request_port,
> + .config_port = msm_config_port,
> + .verify_port = msm_verify_port,
> + .pm = msm_power,
> +};
> +
> +static struct msm_port msm_uart_ports[] = {
> + {
> + .uart = {
> + .iotype = UPIO_MEM,
> + .ops = &msm_uart_pops,
> + .flags = UPF_BOOT_AUTOCONF,
> + .fifosize = 512,
> + .line = 0,
> + },
> + },
> + {
> + .uart = {
> + .iotype = UPIO_MEM,
> + .ops = &msm_uart_pops,
> + .flags = UPF_BOOT_AUTOCONF,
> + .fifosize = 512,
> + .line = 1,
> + },
> + },
> + {
> + .uart = {
> + .iotype = UPIO_MEM,
> + .ops = &msm_uart_pops,
> + .flags = UPF_BOOT_AUTOCONF,
> + .fifosize = 64,
> + .line = 2,
> + },
> + },
> +};
> +
> +#define UART_NR ARRAY_SIZE(msm_uart_ports)
> +
> +static inline struct uart_port *get_port_from_line(unsigned int line)
> +{
> + return &msm_uart_ports[line].uart;
> +}
> +
> +#ifdef CONFIG_SERIAL_MSM_CONSOLE
> +
> +static void msm_console_putchar(struct uart_port *port, int c)
> +{
> + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
> + ;
> + msm_write(port, c, UART_TF);
> +}
> +
> +static void msm_console_write(struct console *co, const char *s,
> + unsigned int count)
> +{
> + struct uart_port *port;
> + struct msm_port *msm_port;
> +
> + BUG_ON(co->index < 0 || co->index >= UART_NR);
> +
> + port = get_port_from_line(co->index);
> + msm_port = UART_TO_MSM(port);
> +
> + spin_lock(&port->lock);
> + uart_console_write(port, s, count, msm_console_putchar);
> + spin_unlock(&port->lock);
> +}
> +
> +static int __init msm_console_setup(struct console *co, char *options)
> +{
> + struct uart_port *port;
> + int baud, flow, bits, parity;
> +
> + if (unlikely(co->index >= UART_NR || co->index < 0))
> + return -ENXIO;
> +
> + port = get_port_from_line(co->index);
> +
> + if (unlikely(!port->membase))
> + return -ENXIO;
> +
> + port->cons = co;
> +
> + msm_init_clock(port);
> +
> + if (options)
> + uart_parse_options(options, &baud, &parity, &bits, &flow);
> +
> + bits = 8;
> + parity = 'n';
> + flow = 'n';
> + msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE,
> + UART_MR2); /* 8N1 */
> +
> + if (baud < 300 || baud > 115200)
> + baud = 115200;
> + msm_set_baud_rate(port, baud);
> +
> + msm_reset(port);
> +
> + printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line);
dev_info(port->dev, "console set...");
But perhaps a check that port->dev is not NULL then pr_info() instead,
I don't know the exact details if console can be used before port is init()
below.
> +
> + return uart_set_options(port, co, baud, parity, bits, flow);
> +}
> +
> +static struct uart_driver msm_uart_driver;
> +
> +static struct console msm_console = {
> + .name = "ttyMSM",
> + .write = msm_console_write,
> + .device = uart_console_device,
> + .setup = msm_console_setup,
> + .flags = CON_PRINTBUFFER,
> + .index = -1,
> + .data = &msm_uart_driver,
> +};
> +
> +#define MSM_CONSOLE (&msm_console)
> +
> +#else
> +#define MSM_CONSOLE NULL
> +#endif
> +
> +static struct uart_driver msm_uart_driver = {
> + .owner = THIS_MODULE,
> + .driver_name = "msm_serial",
> + .dev_name = "ttyMSM",
> + .nr = UART_NR,
> + .cons = MSM_CONSOLE,
> +};
> +
> +static int __init msm_serial_probe(struct platform_device *pdev)
> +{
> + struct msm_port *msm_port;
> + struct resource *resource;
> + struct uart_port *port;
> +
> + if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
> + return -ENXIO;
> +
> + printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id);
dev_info(pdev->dev, "detected...");
> +
> + port = get_port_from_line(pdev->id);
> + port->dev = &pdev->dev;
> + msm_port = UART_TO_MSM(port);
> +
> + msm_port->clk = clk_get(&pdev->dev, "uart_clk");
> + if (unlikely(IS_ERR(msm_port->clk)))
> + return PTR_ERR(msm_port->clk);
> + port->uartclk = clk_get_rate(msm_port->clk);
> +
> + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (unlikely(!resource))
> + return -ENXIO;
> + port->mapbase = resource->start;
> +
> + port->irq = platform_get_irq(pdev, 0);
> + if (unlikely(port->irq < 0))
> + return -ENXIO;
> +
> + platform_set_drvdata(pdev, port);
> +
> + return uart_add_one_port(&msm_uart_driver, port);
> +}
> +
> +static int __devexit msm_serial_remove(struct platform_device *pdev)
__devexit, that means that the MSM serial port can be hot-plugged.
Is this possible on this platform? Do you mean __exit?
> +{
> + struct msm_port *msm_port = platform_get_drvdata(pdev);
> +
> + clk_put(msm_port->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver msm_platform_driver = {
> + .probe = msm_serial_probe,
> + .remove = msm_serial_remove,
__exit_p(msm_serial_remove), or __devexit_p(msm_serial_remove) at
your choice.
> + .driver = {
> + .name = "msm_serial",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init msm_serial_init(void)
> +{
> + int ret;
> +
> + ret = uart_register_driver(&msm_uart_driver);
> + if (unlikely(ret))
> + return ret;
> +
> + ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
> + if (unlikely(ret))
> + uart_unregister_driver(&msm_uart_driver);
> +
> + printk(KERN_INFO "msm_serial: driver initialized\n");
pr_info()
> +
> + return ret;
> +}
> +
> +static void __exit msm_serial_exit(void)
> +{
> +#ifdef CONFIG_SERIAL_MSM_CONSOLE
> + unregister_console(&msm_console);
> +#endif
> + platform_driver_unregister(&msm_platform_driver);
> + uart_unregister_driver(&msm_uart_driver);
> +}
> +
> +module_init(msm_serial_init);
> +module_exit(msm_serial_exit);
> +
> +MODULE_AUTHOR("Robert Love <rlove@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Driver for msm7x serial device");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
> new file mode 100644
> index 0000000..689f1fa
> --- /dev/null
> +++ b/drivers/serial/msm_serial.h
> @@ -0,0 +1,117 @@
> +/*
> + * drivers/serial/msm_serial.h
> + *
> + * Copyright (C) 2007 Google, Inc.
> + * Author: Robert Love <rlove@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
> +#define __DRIVERS_SERIAL_MSM_SERIAL_H
> +
> +#define UART_MR1 0x0000
> +
> +#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
> +#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
> +#define UART_MR1_RX_RDY_CTL (1 << 7)
> +#define UART_MR1_CTS_CTL (1 << 6)
> +
> +#define UART_MR2 0x0004
> +#define UART_MR2_ERROR_MODE (1 << 6)
> +#define UART_MR2_BITS_PER_CHAR 0x30
> +#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
> +#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
> +#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
> +#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
> +#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
> +#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
> +#define UART_MR2_PARITY_MODE_NONE 0x0
> +#define UART_MR2_PARITY_MODE_ODD 0x1
> +#define UART_MR2_PARITY_MODE_EVEN 0x2
> +#define UART_MR2_PARITY_MODE_SPACE 0x3
> +#define UART_MR2_PARITY_MODE 0x3
> +
> +#define UART_CSR 0x0008
> +#define UART_CSR_115200 0xFF
> +#define UART_CSR_57600 0xEE
> +#define UART_CSR_38400 0xDD
> +#define UART_CSR_28800 0xCC
> +#define UART_CSR_19200 0xBB
> +#define UART_CSR_14400 0xAA
> +#define UART_CSR_9600 0x99
> +#define UART_CSR_4800 0x77
> +#define UART_CSR_2400 0x55
> +#define UART_CSR_1200 0x44
> +#define UART_CSR_600 0x33
> +#define UART_CSR_300 0x22
> +
> +#define UART_TF 0x000C
> +
> +#define UART_CR 0x0010
> +#define UART_CR_CMD_NULL (0 << 4)
> +#define UART_CR_CMD_RESET_RX (1 << 4)
> +#define UART_CR_CMD_RESET_TX (2 << 4)
> +#define UART_CR_CMD_RESET_ERR (3 << 4)
> +#define UART_CR_CMD_RESET_BREAK_INT (4 << 4)
> +#define UART_CR_CMD_START_BREAK (5 << 4)
> +#define UART_CR_CMD_STOP_BREAK (6 << 4)
> +#define UART_CR_CMD_RESET_CTS (7 << 4)
> +#define UART_CR_CMD_PACKET_MODE (9 << 4)
> +#define UART_CR_CMD_MODE_RESET (12 << 4)
> +#define UART_CR_CMD_SET_RFR (13 << 4)
> +#define UART_CR_CMD_RESET_RFR (14 << 4)
> +#define UART_CR_TX_DISABLE (1 << 3)
> +#define UART_CR_TX_ENABLE (1 << 3)
> +#define UART_CR_RX_DISABLE (1 << 3)
> +#define UART_CR_RX_ENABLE (1 << 3)
> +
> +#define UART_IMR 0x0014
> +#define UART_IMR_TXLEV (1 << 0)
> +#define UART_IMR_RXSTALE (1 << 3)
> +#define UART_IMR_RXLEV (1 << 4)
> +#define UART_IMR_DELTA_CTS (1 << 5)
> +#define UART_IMR_CURRENT_CTS (1 << 6)
> +
> +#define UART_IPR_RXSTALE_LAST 0x20
> +#define UART_IPR_STALE_LSB 0x1F
> +#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
> +
> +#define UART_IPR 0x0018
> +#define UART_TFWR 0x001C
> +#define UART_RFWR 0x0020
> +#define UART_HCR 0x0024
> +
> +#define UART_MREG 0x0028
> +#define UART_NREG 0x002C
> +#define UART_DREG 0x0030
> +#define UART_MNDREG 0x0034
> +#define UART_IRDA 0x0038
> +#define UART_MISR_MODE 0x0040
> +#define UART_MISR_RESET 0x0044
> +#define UART_MISR_EXPORT 0x0048
> +#define UART_MISR_VAL 0x004C
> +#define UART_TEST_CTRL 0x0050
> +
> +#define UART_SR 0x0008
> +#define UART_SR_HUNT_CHAR (1 << 7)
> +#define UART_SR_RX_BREAK (1 << 6)
> +#define UART_SR_PAR_FRAME_ERR (1 << 5)
> +#define UART_SR_OVERRUN (1 << 4)
> +#define UART_SR_TX_EMPTY (1 << 3)
> +#define UART_SR_TX_READY (1 << 2)
> +#define UART_SR_RX_FULL (1 << 1)
> +#define UART_SR_RX_READY (1 << 0)
> +
> +#define UART_RF 0x000C
> +#define UART_MISR 0x0010
> +#define UART_ISR 0x0014
> +
> +#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 6fd80c4..23d2fb0 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -171,6 +171,9 @@
> /* Timberdale UART */
> #define PORT_TIMBUART 87
>
> +/* Qualcomm MSM SoCs */
> +#define PORT_MSM 88
> +
> #ifdef __KERNEL__
>
> #include <linux/compiler.h>
> --
> 1.6.2.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/