[PATCH 1/2] regulator: Make virtual consumer use dev_printk

From: Mark Brown
Date: Wed Jun 17 2009 - 10:45:31 EST


Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/regulator/virtual.c | 34 ++++++++++++++++++----------------
1 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index e953c18..5c1d756 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -27,17 +27,18 @@ struct virtual_consumer_data {
unsigned int mode;
};

-static void update_voltage_constraints(struct virtual_consumer_data *data)
+static void update_voltage_constraints(struct device *dev,
+ struct virtual_consumer_data *data)
{
int ret;

if (data->min_uV && data->max_uV
&& data->min_uV <= data->max_uV) {
ret = regulator_set_voltage(data->regulator,
- data->min_uV, data->max_uV);
+ data->min_uV, data->max_uV);
if (ret != 0) {
- printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
- ret);
+ dev_err(dev,
+ "regulator_set_voltage() failed: %d\n", ret);
return;
}
}
@@ -47,7 +48,7 @@ static void update_voltage_constraints(struct virtual_consumer_data *data)
if (ret == 0)
data->enabled = 1;
else
- printk(KERN_ERR "regulator_enable() failed: %d\n",
+ dev_err(dev, "regulator_enable() failed: %d\n",
ret);
}

@@ -56,13 +57,13 @@ static void update_voltage_constraints(struct virtual_consumer_data *data)
if (ret == 0)
data->enabled = 0;
else
- printk(KERN_ERR "regulator_disable() failed: %d\n",
+ dev_err(dev, "regulator_disable() failed: %d\n",
ret);
}
}

-static void update_current_limit_constraints(struct virtual_consumer_data
- *data)
+static void update_current_limit_constraints(struct device *dev,
+ struct virtual_consumer_data *data)
{
int ret;

@@ -71,8 +72,9 @@ static void update_current_limit_constraints(struct virtual_consumer_data
ret = regulator_set_current_limit(data->regulator,
data->min_uA, data->max_uA);
if (ret != 0) {
- pr_err("regulator_set_current_limit() failed: %d\n",
- ret);
+ dev_err(dev,
+ "regulator_set_current_limit() failed: %d\n",
+ ret);
return;
}
}
@@ -82,7 +84,7 @@ static void update_current_limit_constraints(struct virtual_consumer_data
if (ret == 0)
data->enabled = 1;
else
- printk(KERN_ERR "regulator_enable() failed: %d\n",
+ dev_err(dev, "regulator_enable() failed: %d\n",
ret);
}

@@ -91,7 +93,7 @@ static void update_current_limit_constraints(struct virtual_consumer_data
if (ret == 0)
data->enabled = 0;
else
- printk(KERN_ERR "regulator_disable() failed: %d\n",
+ dev_err(dev, "regulator_disable() failed: %d\n",
ret);
}
}
@@ -115,7 +117,7 @@ static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);

data->min_uV = val;
- update_voltage_constraints(data);
+ update_voltage_constraints(dev, data);

mutex_unlock(&data->lock);

@@ -141,7 +143,7 @@ static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);

data->max_uV = val;
- update_voltage_constraints(data);
+ update_voltage_constraints(dev, data);

mutex_unlock(&data->lock);

@@ -167,7 +169,7 @@ static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);

data->min_uA = val;
- update_current_limit_constraints(data);
+ update_current_limit_constraints(dev, data);

mutex_unlock(&data->lock);

@@ -193,7 +195,7 @@ static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);

data->max_uA = val;
- update_current_limit_constraints(data);
+ update_current_limit_constraints(dev, data);

mutex_unlock(&data->lock);

--
1.6.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/