Re: [spi-devel-general] [PATCH v4] powerpc/5200: Add mpc5200-spi(non-PSC) device driver
From: Wolfram Sang
Date: Thu Jun 18 2009 - 10:29:13 EST
Hi Grant,
> The double spaces at the end of sentences are intentional. It is
> perhaps a bit quaint and old fashioned, but it is my writing style.
Ah, okay.
> >> +
> >> + /* Statistics */
> >> + int msg_count;
> >> + int wcol_count;
> >> + int wcol_ticks;
> >> + u32 wcol_tx_timestamp;
> >> + int modf_count;
> >> + int byte_count;
> >
> > Hmm, there isn't even a debug-printout for those. Putting #ifdef DEBUG around
> > them will be ugly. Well, I can't make up if this is just overhead or useful
> > debugging aid, so no real objection :)
>
> There used to be a sysfs interface for dumping these, but it was an
> ugly misuse. I'd like to leave these in. I still have the sysfs bits
> in a private patch and I'm going to rework them for debugfs.
Okay. Maybe a comment stating the future use will be nice.
>
> > But I wonder more about the usage of the SS pin and if this chipsel is needed
> > at all (sadly I cannot test as I don't have any board with SPI connected to
> > that device). You define the SS-pin as output, but do not set the SSOE-bit.
> > More, you use the MODF-feature, so the SS-pin should be defined as input?
> > According to Table 17.3 in the PM, you have that pin defined as generic purpose
> > output.
>
> That's right. The SS handling by the SPI device is completely
> useless, so this driver uses it as a GPIO and asserts it manually.
That definately needs a comment :D (perhaps with some more details if you know them).
> The MODF irq is probably irrelevant, but I'd like to leave it in for
> completeness.
But it won't work if the pin is set to output, no? Are you sure there are no
side-effects?
> >> + /* initialize the device */
> >> + out_8(regs+SPI_CTRL1, SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR);
> >
> > spaces around operator.
>
> Intentional to keep from spilling past column 80; but I'll move the
> missing spaces to around the | operators. I think it is easier to
> read that way.
Ah, I remember, we had this topic a while ago :D
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Attachment:
signature.asc
Description: Digital signature