[PATCH 14/15] msm_serial: serial driver for MSM7K onboard serialperipheral.
From: Alan Cox
Date: Mon Jun 22 2009 - 12:46:50 EST
From: Robert Love <rlove@xxxxxxxxxx>
Signed-off-by: Brian Swetland <swetland@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/serial/Kconfig | 10 +
drivers/serial/Makefile | 1
drivers/serial/msm_serial.c | 767 +++++++++++++++++++++++++++++++++++++++++++
drivers/serial/msm_serial.h | 117 +++++++
include/linux/serial_core.h | 3
5 files changed, 898 insertions(+), 0 deletions(-)
create mode 100644 drivers/serial/msm_serial.c
create mode 100644 drivers/serial/msm_serial.h
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1132c5c..037c1e0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1320,6 +1320,16 @@ config SERIAL_SGI_IOC3
If you have an SGI Altix with an IOC3 serial card,
say Y or M. Otherwise, say N.
+config SERIAL_MSM
+ bool "MSM on-chip serial port support"
+ depends on ARM && ARCH_MSM
+ select SERIAL_CORE
+
+config SERIAL_MSM_CONSOLE
+ bool "MSM serial console support"
+ depends on SERIAL_MSM=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_NETX
tristate "NetX serial port support"
depends on ARM && ARCH_NETX
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 45a8658..d5a2998 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
+obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
new file mode 100644
index 0000000..1a7c856
--- /dev/null
+++ b/drivers/serial/msm_serial.c
@@ -0,0 +1,767 @@
+/*
+ * drivers/serial/msm_serial.c - driver for msm7k serial device and console
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@xxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/hrtimer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_serial.h"
+
+struct msm_port {
+ struct uart_port uart;
+ char name[16];
+ struct clk *clk;
+ unsigned int imr;
+};
+
+#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port)
+
+static inline void msm_write(struct uart_port *port, unsigned int val,
+ unsigned int off)
+{
+ __raw_writel(val, port->membase + off);
+}
+
+static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+ return __raw_readl(port->membase + off);
+}
+
+static void msm_stop_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_start_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr |= UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_stop_rx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_enable_ms(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr |= UART_IMR_DELTA_CTS;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->port.tty;
+ unsigned int sr;
+
+ /*
+ * Handle overrun. My understanding of the hardware is that overrun
+ * is not tied to the RX buffer, so we handle the case out of band.
+ */
+ if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ }
+
+ /* and now the main RX loop */
+ while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+ unsigned int c;
+ char flag = TTY_NORMAL;
+
+ c = msm_read(port, UART_RF);
+
+ if (sr & UART_SR_RX_BREAK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & UART_SR_PAR_FRAME_ERR) {
+ port->icount.frame++;
+ } else {
+ port->icount.rx++;
+ }
+
+ /* Mask conditions we're ignorning. */
+ sr &= port->read_status_mask;
+
+ if (sr & UART_SR_RX_BREAK) {
+ flag = TTY_BREAK;
+ } else if (sr & UART_SR_PAR_FRAME_ERR) {
+ flag = TTY_FRAME;
+ }
+
+ if (!uart_handle_sysrq_char(port, c))
+ tty_insert_flip_char(tty, c, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ int sent_tx;
+
+ if (port->x_char) {
+ msm_write(port, port->x_char, UART_TF);
+ port->icount.tx++;
+ port->x_char = 0;
+ }
+
+ while (msm_read(port, UART_SR) & UART_SR_TX_READY) {
+ if (uart_circ_empty(xmit)) {
+ /* disable tx interrupts */
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+ break;
+ }
+
+ msm_write(port, xmit->buf[xmit->tail], UART_TF);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ sent_tx = 1;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+ msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ port->icount.cts++;
+ wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t msm_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int misr;
+
+ spin_lock(&port->lock);
+ misr = msm_read(port, UART_MISR);
+ msm_write(port, 0, UART_IMR); /* disable interrupt */
+
+ if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE))
+ handle_rx(port);
+ if (misr & UART_IMR_TXLEV)
+ handle_tx(port);
+ if (misr & UART_IMR_DELTA_CTS)
+ handle_delta_cts(port);
+
+ msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int msm_tx_empty(struct uart_port *port)
+{
+ return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int msm_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
+}
+
+static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned int mr;
+
+ mr = msm_read(port, UART_MR1);
+
+ if (!(mctrl & TIOCM_RTS)) {
+ mr &= ~UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
+ msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+ } else {
+ mr |= UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
+ }
+}
+
+static void msm_break_ctl(struct uart_port *port, int break_ctl)
+{
+ if (break_ctl)
+ msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+ else
+ msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+}
+
+static void msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+ unsigned int baud_code, rxstale, watermark;
+
+ switch (baud) {
+ case 300:
+ baud_code = UART_CSR_300;
+ rxstale = 1;
+ break;
+ case 600:
+ baud_code = UART_CSR_600;
+ rxstale = 1;
+ break;
+ case 1200:
+ baud_code = UART_CSR_1200;
+ rxstale = 1;
+ break;
+ case 2400:
+ baud_code = UART_CSR_2400;
+ rxstale = 1;
+ break;
+ case 4800:
+ baud_code = UART_CSR_4800;
+ rxstale = 1;
+ break;
+ case 9600:
+ baud_code = UART_CSR_9600;
+ rxstale = 2;
+ break;
+ case 14400:
+ baud_code = UART_CSR_14400;
+ rxstale = 3;
+ break;
+ case 19200:
+ baud_code = UART_CSR_19200;
+ rxstale = 4;
+ break;
+ case 28800:
+ baud_code = UART_CSR_28800;
+ rxstale = 6;
+ break;
+ case 38400:
+ baud_code = UART_CSR_38400;
+ rxstale = 8;
+ break;
+ case 57600:
+ baud_code = UART_CSR_57600;
+ rxstale = 16;
+ break;
+ case 115200:
+ default:
+ baud_code = UART_CSR_115200;
+ rxstale = 31;
+ break;
+ }
+
+ msm_write(port, baud_code, UART_CSR);
+
+ /* RX stale watermark */
+ watermark = UART_IPR_STALE_LSB & rxstale;
+ watermark |= UART_IPR_RXSTALE_LAST;
+ watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+ msm_write(port, watermark, UART_IPR);
+
+ /* set RX watermark */
+ watermark = (port->fifosize * 3) / 4;
+ msm_write(port, watermark, UART_RFWR);
+
+ /* set TX watermark */
+ msm_write(port, 10, UART_TFWR);
+}
+
+static void msm_reset(struct uart_port *port)
+{
+ /* reset everything */
+ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+}
+
+static void msm_init_clock(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ clk_enable(msm_port->clk);
+
+ msm_write(port, 0xC0, UART_MREG);
+ msm_write(port, 0xB2, UART_NREG);
+ msm_write(port, 0x7D, UART_DREG);
+ msm_write(port, 0x1C, UART_MNDREG);
+}
+
+static int msm_startup(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int data, rfr_level;
+ int ret;
+
+ snprintf(msm_port->name, sizeof(msm_port->name),
+ "msm_serial%d", port->line);
+
+ ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+ msm_port->name, port);
+ if (unlikely(ret))
+ return ret;
+
+ msm_init_clock(port);
+
+ if (likely(port->fifosize > 12))
+ rfr_level = port->fifosize - 12;
+ else
+ rfr_level = port->fifosize;
+
+ /* set automatic RFR level */
+ data = msm_read(port, UART_MR1);
+ data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+ data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+ data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+ data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+ msm_write(port, data, UART_MR1);
+
+ /* make sure that RXSTALE count is non-zero */
+ data = msm_read(port, UART_IPR);
+ if (unlikely(!data)) {
+ data |= UART_IPR_RXSTALE_LAST;
+ data |= UART_IPR_STALE_LSB;
+ msm_write(port, data, UART_IPR);
+ }
+
+ msm_reset(port);
+
+ msm_write(port, 0x05, UART_CR); /* enable TX & RX */
+
+ /* turn on RX and CTS interrupts */
+ msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
+ UART_IMR_CURRENT_CTS;
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ return 0;
+}
+
+static void msm_shutdown(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr = 0;
+ msm_write(port, 0, UART_IMR); /* disable interrupts */
+
+ clk_disable(msm_port->clk);
+
+ free_irq(port->irq, port);
+}
+
+static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, mr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* calculate and set baud rate */
+ baud = uart_get_baud_rate(port, termios, old, 300, 115200);
+ msm_set_baud_rate(port, baud);
+
+ /* calculate parity */
+ mr = msm_read(port, UART_MR2);
+ mr &= ~UART_MR2_PARITY_MODE;
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ mr |= UART_MR2_PARITY_MODE_ODD;
+ else if (termios->c_cflag & CMSPAR)
+ mr |= UART_MR2_PARITY_MODE_SPACE;
+ else
+ mr |= UART_MR2_PARITY_MODE_EVEN;
+ }
+
+ /* calculate bits per char */
+ mr &= ~UART_MR2_BITS_PER_CHAR;
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mr |= UART_MR2_BITS_PER_CHAR_5;
+ break;
+ case CS6:
+ mr |= UART_MR2_BITS_PER_CHAR_6;
+ break;
+ case CS7:
+ mr |= UART_MR2_BITS_PER_CHAR_7;
+ break;
+ case CS8:
+ default:
+ mr |= UART_MR2_BITS_PER_CHAR_8;
+ break;
+ }
+
+ /* calculate stop bits */
+ mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+ if (termios->c_cflag & CSTOPB)
+ mr |= UART_MR2_STOP_BIT_LEN_TWO;
+ else
+ mr |= UART_MR2_STOP_BIT_LEN_ONE;
+
+ /* set parity, bits per char, and stop bit */
+ msm_write(port, mr, UART_MR2);
+
+ /* calculate and set hardware flow control */
+ mr = msm_read(port, UART_MR1);
+ mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+ if (termios->c_cflag & CRTSCTS) {
+ mr |= UART_MR1_CTS_CTL;
+ mr |= UART_MR1_RX_RDY_CTL;
+ }
+ msm_write(port, mr, UART_MR1);
+
+ /* Configure status bits to ignore based on termio flags. */
+ port->read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART_SR_RX_BREAK;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *msm_type(struct uart_port *port)
+{
+ return "MSM";
+}
+
+static void msm_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *resource;
+ resource_size_t size;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return;
+ size = resource->end - resource->start + 1;
+
+ release_mem_region(port->mapbase, size);
+ iounmap(port->membase);
+ port->membase = NULL;
+}
+
+static int msm_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *resource;
+ resource_size_t size;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return -ENXIO;
+ size = resource->end - resource->start + 1;
+
+ if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial")))
+ return -EBUSY;
+
+ port->membase = ioremap(port->mapbase, size);
+ if (!port->membase) {
+ release_mem_region(port->mapbase, size);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void msm_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_MSM;
+ msm_request_port(port);
+ }
+}
+
+static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
+ return -EINVAL;
+ if (unlikely(port->irq != ser->irq))
+ return -EINVAL;
+ return 0;
+}
+
+static void msm_power(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ switch (state) {
+ case 0:
+ clk_enable(msm_port->clk);
+ break;
+ case 3:
+ clk_disable(msm_port->clk);
+ break;
+ default:
+ printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state);
+ }
+}
+
+static struct uart_ops msm_uart_pops = {
+ .tx_empty = msm_tx_empty,
+ .set_mctrl = msm_set_mctrl,
+ .get_mctrl = msm_get_mctrl,
+ .stop_tx = msm_stop_tx,
+ .start_tx = msm_start_tx,
+ .stop_rx = msm_stop_rx,
+ .enable_ms = msm_enable_ms,
+ .break_ctl = msm_break_ctl,
+ .startup = msm_startup,
+ .shutdown = msm_shutdown,
+ .set_termios = msm_set_termios,
+ .type = msm_type,
+ .release_port = msm_release_port,
+ .request_port = msm_request_port,
+ .config_port = msm_config_port,
+ .verify_port = msm_verify_port,
+ .pm = msm_power,
+};
+
+static struct msm_port msm_uart_ports[] = {
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 512,
+ .line = 0,
+ },
+ },
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 512,
+ .line = 1,
+ },
+ },
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 64,
+ .line = 2,
+ },
+ },
+};
+
+#define UART_NR ARRAY_SIZE(msm_uart_ports)
+
+static inline struct uart_port *get_port_from_line(unsigned int line)
+{
+ return &msm_uart_ports[line].uart;
+}
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+
+static void msm_console_putchar(struct uart_port *port, int c)
+{
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ ;
+ msm_write(port, c, UART_TF);
+}
+
+static void msm_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port;
+ struct msm_port *msm_port;
+
+ BUG_ON(co->index < 0 || co->index >= UART_NR);
+
+ port = get_port_from_line(co->index);
+ msm_port = UART_TO_MSM(port);
+
+ spin_lock(&port->lock);
+ uart_console_write(port, s, count, msm_console_putchar);
+ spin_unlock(&port->lock);
+}
+
+static int __init msm_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud, flow, bits, parity;
+
+ if (unlikely(co->index >= UART_NR || co->index < 0))
+ return -ENXIO;
+
+ port = get_port_from_line(co->index);
+
+ if (unlikely(!port->membase))
+ return -ENXIO;
+
+ port->cons = co;
+
+ msm_init_clock(port);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ bits = 8;
+ parity = 'n';
+ flow = 'n';
+ msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE,
+ UART_MR2); /* 8N1 */
+
+ if (baud < 300 || baud > 115200)
+ baud = 115200;
+ msm_set_baud_rate(port, baud);
+
+ msm_reset(port);
+
+ printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver msm_uart_driver;
+
+static struct console msm_console = {
+ .name = "ttyMSM",
+ .write = msm_console_write,
+ .device = uart_console_device,
+ .setup = msm_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &msm_uart_driver,
+};
+
+#define MSM_CONSOLE (&msm_console)
+
+#else
+#define MSM_CONSOLE NULL
+#endif
+
+static struct uart_driver msm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "msm_serial",
+ .dev_name = "ttyMSM",
+ .nr = UART_NR,
+ .cons = MSM_CONSOLE,
+};
+
+static int __init msm_serial_probe(struct platform_device *pdev)
+{
+ struct msm_port *msm_port;
+ struct resource *resource;
+ struct uart_port *port;
+
+ if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
+ return -ENXIO;
+
+ printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id);
+
+ port = get_port_from_line(pdev->id);
+ port->dev = &pdev->dev;
+ msm_port = UART_TO_MSM(port);
+
+ msm_port->clk = clk_get(&pdev->dev, "uart_clk");
+ if (unlikely(IS_ERR(msm_port->clk)))
+ return PTR_ERR(msm_port->clk);
+ port->uartclk = clk_get_rate(msm_port->clk);
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return -ENXIO;
+ port->mapbase = resource->start;
+
+ port->irq = platform_get_irq(pdev, 0);
+ if (unlikely(port->irq < 0))
+ return -ENXIO;
+
+ platform_set_drvdata(pdev, port);
+
+ return uart_add_one_port(&msm_uart_driver, port);
+}
+
+static int __devexit msm_serial_remove(struct platform_device *pdev)
+{
+ struct msm_port *msm_port = platform_get_drvdata(pdev);
+
+ clk_put(msm_port->clk);
+
+ return 0;
+}
+
+static struct platform_driver msm_platform_driver = {
+ .probe = msm_serial_probe,
+ .remove = msm_serial_remove,
+ .driver = {
+ .name = "msm_serial",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init msm_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&msm_uart_driver);
+ if (unlikely(ret))
+ return ret;
+
+ ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+ if (unlikely(ret))
+ uart_unregister_driver(&msm_uart_driver);
+
+ printk(KERN_INFO "msm_serial: driver initialized\n");
+
+ return ret;
+}
+
+static void __exit msm_serial_exit(void)
+{
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+ unregister_console(&msm_console);
+#endif
+ platform_driver_unregister(&msm_platform_driver);
+ uart_unregister_driver(&msm_uart_driver);
+}
+
+module_init(msm_serial_init);
+module_exit(msm_serial_exit);
+
+MODULE_AUTHOR("Robert Love <rlove@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Driver for msm7x serial device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
new file mode 100644
index 0000000..689f1fa
--- /dev/null
+++ b/drivers/serial/msm_serial.h
@@ -0,0 +1,117 @@
+/*
+ * drivers/serial/msm_serial.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@xxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
+#define __DRIVERS_SERIAL_MSM_SERIAL_H
+
+#define UART_MR1 0x0000
+
+#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
+#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
+#define UART_MR1_RX_RDY_CTL (1 << 7)
+#define UART_MR1_CTS_CTL (1 << 6)
+
+#define UART_MR2 0x0004
+#define UART_MR2_ERROR_MODE (1 << 6)
+#define UART_MR2_BITS_PER_CHAR 0x30
+#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
+#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
+#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
+#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
+#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
+#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
+#define UART_MR2_PARITY_MODE_NONE 0x0
+#define UART_MR2_PARITY_MODE_ODD 0x1
+#define UART_MR2_PARITY_MODE_EVEN 0x2
+#define UART_MR2_PARITY_MODE_SPACE 0x3
+#define UART_MR2_PARITY_MODE 0x3
+
+#define UART_CSR 0x0008
+#define UART_CSR_115200 0xFF
+#define UART_CSR_57600 0xEE
+#define UART_CSR_38400 0xDD
+#define UART_CSR_28800 0xCC
+#define UART_CSR_19200 0xBB
+#define UART_CSR_14400 0xAA
+#define UART_CSR_9600 0x99
+#define UART_CSR_4800 0x77
+#define UART_CSR_2400 0x55
+#define UART_CSR_1200 0x44
+#define UART_CSR_600 0x33
+#define UART_CSR_300 0x22
+
+#define UART_TF 0x000C
+
+#define UART_CR 0x0010
+#define UART_CR_CMD_NULL (0 << 4)
+#define UART_CR_CMD_RESET_RX (1 << 4)
+#define UART_CR_CMD_RESET_TX (2 << 4)
+#define UART_CR_CMD_RESET_ERR (3 << 4)
+#define UART_CR_CMD_RESET_BREAK_INT (4 << 4)
+#define UART_CR_CMD_START_BREAK (5 << 4)
+#define UART_CR_CMD_STOP_BREAK (6 << 4)
+#define UART_CR_CMD_RESET_CTS (7 << 4)
+#define UART_CR_CMD_PACKET_MODE (9 << 4)
+#define UART_CR_CMD_MODE_RESET (12 << 4)
+#define UART_CR_CMD_SET_RFR (13 << 4)
+#define UART_CR_CMD_RESET_RFR (14 << 4)
+#define UART_CR_TX_DISABLE (1 << 3)
+#define UART_CR_TX_ENABLE (1 << 3)
+#define UART_CR_RX_DISABLE (1 << 3)
+#define UART_CR_RX_ENABLE (1 << 3)
+
+#define UART_IMR 0x0014
+#define UART_IMR_TXLEV (1 << 0)
+#define UART_IMR_RXSTALE (1 << 3)
+#define UART_IMR_RXLEV (1 << 4)
+#define UART_IMR_DELTA_CTS (1 << 5)
+#define UART_IMR_CURRENT_CTS (1 << 6)
+
+#define UART_IPR_RXSTALE_LAST 0x20
+#define UART_IPR_STALE_LSB 0x1F
+#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
+
+#define UART_IPR 0x0018
+#define UART_TFWR 0x001C
+#define UART_RFWR 0x0020
+#define UART_HCR 0x0024
+
+#define UART_MREG 0x0028
+#define UART_NREG 0x002C
+#define UART_DREG 0x0030
+#define UART_MNDREG 0x0034
+#define UART_IRDA 0x0038
+#define UART_MISR_MODE 0x0040
+#define UART_MISR_RESET 0x0044
+#define UART_MISR_EXPORT 0x0048
+#define UART_MISR_VAL 0x004C
+#define UART_TEST_CTRL 0x0050
+
+#define UART_SR 0x0008
+#define UART_SR_HUNT_CHAR (1 << 7)
+#define UART_SR_RX_BREAK (1 << 6)
+#define UART_SR_PAR_FRAME_ERR (1 << 5)
+#define UART_SR_OVERRUN (1 << 4)
+#define UART_SR_TX_EMPTY (1 << 3)
+#define UART_SR_TX_READY (1 << 2)
+#define UART_SR_RX_FULL (1 << 1)
+#define UART_SR_RX_READY (1 << 0)
+
+#define UART_RF 0x000C
+#define UART_MISR 0x0010
+#define UART_ISR 0x0014
+
+#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6fd80c4..23d2fb0 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -171,6 +171,9 @@
/* Timberdale UART */
#define PORT_TIMBUART 87
+/* Qualcomm MSM SoCs */
+#define PORT_MSM 88
+
#ifdef __KERNEL__
#include <linux/compiler.h>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/