Re: [PATCH] USB: isp1760: allow platform devices to customizedevflags

[Ben Dooks]

On Tue, Jun 23, 2009 at 09:18:34AM -0400, Mike Frysinger wrote:
> From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> 
> Platform device support was merged earlier, but support for boards to
> customize the devflags aspect of the controller was not.  We want this on
> Blackfin systems to control the bus width, but might as well expose all of
> the fields while we're at it.
> 
> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx>
> Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
> ---
>  drivers/usb/host/isp1760-hcd.c |    4 ++++
>  drivers/usb/host/isp1760-hcd.h |    2 ++
>  drivers/usb/host/isp1760-if.c  |   21 ++++++++++++++++++++-
>  include/linux/usb/isp1760.h    |   18 ++++++++++++++++++
>  4 files changed, 44 insertions(+), 1 deletions(-)
>  create mode 100644 include/linux/usb/isp1760.h
> 
> diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
> index 1543846..9600a58 100644
> --- a/drivers/usb/host/isp1760-hcd.c
> +++ b/drivers/usb/host/isp1760-hcd.c
> @@ -386,6 +386,10 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
>  		hwmode |= HW_DACK_POL_HIGH;
>  	if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
>  		hwmode |= HW_DREQ_POL_HIGH;
> +	if (priv->devflags & ISP1760_FLAG_INTR_POL_HIGH)
> +		hwmode |= HW_INTR_HIGH_ACT;
> +	if (priv->devflags & ISP1760_FLAG_INTR_EDGE_TRIG)
> +		hwmode |= HW_INTR_EDGE_TRIG;

better move these to the irq resource flags from the resource array
in the platfrom device.
  
>  	/*
>  	 * We have to set this first in case we're in 16-bit mode.
> diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
> index 462f494..6931ef5 100644
> --- a/drivers/usb/host/isp1760-hcd.h
> +++ b/drivers/usb/host/isp1760-hcd.h
> @@ -142,6 +142,8 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
>  #define ISP1760_FLAG_DACK_POL_HIGH	0x00000010 /* DACK active high */
>  #define ISP1760_FLAG_DREQ_POL_HIGH	0x00000020 /* DREQ active high */
>  #define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
> +#define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
> +#define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
>  
>  /* chip memory management */
>  struct memory_chunk {
> diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
> index d4feebf..1c9f977 100644
> --- a/drivers/usb/host/isp1760-if.c
> +++ b/drivers/usb/host/isp1760-if.c
> @@ -3,6 +3,7 @@
>   * Currently there is support for
>   * - OpenFirmware
>   * - PCI
> + * - PDEV (generic platform device centralized driver model)
>   *
>   * (c) 2007 Sebastian Siewior <bigeasy@xxxxxxxxxxxxx>
>   *
> @@ -11,6 +12,7 @@
>  #include <linux/usb.h>
>  #include <linux/io.h>
>  #include <linux/platform_device.h>
> +#include <linux/usb/isp1760.h>
>  
>  #include "../core/hcd.h"
>  #include "isp1760-hcd.h"
> @@ -308,6 +310,8 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
>  	struct resource *mem_res;
>  	struct resource *irq_res;
>  	resource_size_t mem_size;
> +	struct isp1760_platform_data *priv = pdev->dev.platform_data;
> +	unsigned int devflags = 0;
>  	unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED;
>  
>  	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -330,8 +334,23 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
>  	}
>  	irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
>  
> +	if (priv) {
> +		if (priv->is_isp1761)
> +			devflags |= ISP1760_FLAG_ISP1761;
> +		if (priv->bus_width_16)
> +			devflags |= ISP1760_FLAG_BUS_WIDTH_16;
> +		if (priv->port1_otg)
> +			devflags |= ISP1760_FLAG_OTG_EN;
> +		if (priv->analog_oc)
> +			devflags |= ISP1760_FLAG_ANALOG_OC;
> +		if (priv->dack_polarity_high)
> +			devflags |= ISP1760_FLAG_DACK_POL_HIGH;
> +		if (priv->dreq_polarity_high)
> +			devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
> +	}
> +
>  	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
> -			       irqflags, &pdev->dev, dev_name(&pdev->dev), 0);
> +			       irqflags, &pdev->dev, dev_name(&pdev->dev), devflags);
>  	if (IS_ERR(hcd)) {
>  		pr_warning("isp1760: Failed to register the HCD device\n");
>  		ret = -ENODEV;
> diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h
> new file mode 100644
> index 0000000..de7de53
> --- /dev/null
> +++ b/include/linux/usb/isp1760.h
> @@ -0,0 +1,18 @@
> +/*
> + * board initialization should put one of these into dev->platform_data
> + * and place the isp1760 onto platform_bus named "isp1760-hcd".
> + */
> +
> +#ifndef __LINUX_USB_ISP1760_H
> +#define __LINUX_USB_ISP1760_H
> +
> +struct isp1760_platform_data {
> +	unsigned is_isp1761:1;			/* Chip is ISP1761 */
> +	unsigned bus_width_16:1;		/* 16/32-bit data bus width */
> +	unsigned port1_otg:1;			/* Port 1 supports OTG */
> +	unsigned analog_oc:1;			/* Analog overcurrent */
> +	unsigned dack_polarity_high:1;		/* DACK active high */
> +	unsigned dreq_polarity_high:1;		/* DREQ active high */
> +};
> +
> +#endif /* __LINUX_USB_ISP1760_H */
> -- 
> 1.6.3.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
Ben (ben@xxxxxxxxx, http://www.fluff.org/)

  'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/