[PATCH 13/20] omapfb: dispc: Various typo fixes

[Imre Deak]

- value and register offset was swapped in a dispc write
- DISPC_CONTROL register was used instead of DISPC_SYSCONFIG
- FIFO size bit field had incorrect length for OMAP3

Fixed-by: arun <arunedarath@xxxxxxxxxxxxxxxxxxxx>
Fixed-by: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
Fixed-by: Andrzej Zaborowski <balrog@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
Acked-by: Krzysztof Helt <krzysztof.h1@xxxxx>
---
 drivers/video/omap/dispc.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 148cbcc..2db8fbb 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -286,7 +286,7 @@ static void setup_plane_fifo(int plane, int ext_mode)
 	BUG_ON(plane > 2);
 
 	l = dispc_read_reg(fsz_reg[plane]);
-	l &= FLD_MASK(0, 9);
+	l &= FLD_MASK(0, 11);
 	if (ext_mode) {
 		low = l * 3 / 4;
 		high = l;
@@ -294,7 +294,7 @@ static void setup_plane_fifo(int plane, int ext_mode)
 		low = l / 4;
 		high = l * 3 / 4;
 	}
-	MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 9) | FLD_MASK(0, 9),
+	MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 12) | FLD_MASK(0, 12),
 			(high << 16) | low);
 }
 
@@ -1397,7 +1397,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
 	}
 
 	/* Enable smart idle and autoidle */
-	l = dispc_read_reg(DISPC_CONTROL);
+	l = dispc_read_reg(DISPC_SYSCONFIG);
 	l &= ~((3 << 12) | (3 << 3));
 	l |= (2 << 12) | (2 << 3) | (1 << 0);
 	dispc_write_reg(DISPC_SYSCONFIG, l);
@@ -1409,7 +1409,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
 	dispc_write_reg(DISPC_CONFIG, l);
 
 	l = dispc_read_reg(DISPC_IRQSTATUS);
-	dispc_write_reg(l, DISPC_IRQSTATUS);
+	dispc_write_reg(DISPC_IRQSTATUS, l);
 
 	/* Enable those that we handle always */
 	omap_dispc_enable_irqs(DISPC_IRQ_FRAMEMASK);
-- 
1.6.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/