Re: da9030: ldo11 ignores disable

[Liam Girdwood]

On Thu, 2009-06-25 at 15:39 +0000, Jonathan Cameron wrote:
> Hi All,
> 
> Whilst testing a regulator machine config I've run into a weird issue.
> 
> The preliminary data sheet I have suggests that there are two enable
> registers
> for ldo11 but neither rctl22 or rctl11 seems to have any effect (on
> their own
> or both cleared together). I can change the voltage just fine, but not
> actually turn it off.
> 
> Anyone come across this problem or have any idea what is going on?

I've come across something similar in the past with two enable bits
causing I2C register cache coherency issues. The cache bits became out
of sync with reality and stopped some I2C writes happening.

Another option is that your hardware config doesn't allow ldo11 to be
disabled ?

HTH

Liam

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/