[PATCH 01/18] Staging: rtl8187se: remove ENABLE_DOT11D ifdefs

From: Bartlomiej Zolnierkiewicz
Date: Sun Jun 28 2009 - 10:12:34 EST

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] Staging: rtl8187se: remove ENABLE_DOT11D ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
on top of http://patchwork.kernel.org/patch/30083/

drivers/staging/rtl8187se/Makefile | 3
drivers/staging/rtl8187se/ieee80211/dot11d.c | 2
drivers/staging/rtl8187se/ieee80211/ieee80211.h | 10 --
drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c | 12 ---
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c | 62 ----------------
drivers/staging/rtl8187se/r8180_core.c | 20 -----
drivers/staging/rtl8187se/r8180_rtl8225z2.c | 6 -
drivers/staging/rtl8187se/r8180_wx.c | 14 ---
drivers/staging/rtl8187se/r8185b_init.c | 4 -
9 files changed, 133 deletions(-)

Index: b/drivers/staging/rtl8187se/Makefile
===================================================================
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -17,9 +17,6 @@ EXTRA_CFLAGS += -DSW_DIG
EXTRA_CFLAGS += -DRATE_ADAPT
EXTRA_CFLAGS += -DCONFIG_RTL8180_PM

-#+YJ,080626
-EXTRA_CFLAGS += -DENABLE_DOT11D
-
#enable it for legacy power save, disable it for leisure power save
EXTRA_CFLAGS += -DENABLE_LPS

Index: b/drivers/staging/rtl8187se/ieee80211/dot11d.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
@@ -1,4 +1,3 @@
-#ifdef ENABLE_DOT11D
//-----------------------------------------------------------------------------
// File:
// Dot11d.c
@@ -233,4 +232,3 @@ EXPORT_SYMBOL(DOT11D_ScanComplete);
EXPORT_SYMBOL(IsLegalChannel);
EXPORT_SYMBOL(ToLegalChannel);
#endif
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -694,7 +694,6 @@ struct ieee80211_header_data {
#define MFIE_TYPE_RATES_EX 50
#define MFIE_TYPE_GENERIC 221

-#ifdef ENABLE_DOT11D
typedef enum
{
COUNTRY_CODE_FCC = 0,
@@ -709,7 +708,6 @@ typedef enum
COUNTRY_CODE_GLOBAL_DOMAIN = 9,
COUNTRY_CODE_WORLD_WIDE_13_INDEX = 10
}country_code_type_t;
-#endif

struct ieee80211_info_element_hdr {
u8 id;
@@ -961,10 +959,8 @@ struct ieee80211_network {
#ifdef THOMAS_TURBO
u8 Turbo_Enable;//enable turbo mode, added by thomas
#endif
-#ifdef ENABLE_DOT11D
u16 CountryIeLen;
u8 CountryIeBuf[MAX_IE_LEN];
-#endif
};

enum ieee80211_state {
@@ -1105,18 +1101,12 @@ struct ieee80211_device {
*/
short sync_scan_hurryup;

-#ifdef ENABLE_DOT11D
void * pDot11dInfo;
bool bGlobalDomain;

// For Liteon Ch12~13 passive scan
u8 MinPassiveChnlNum;
u8 IbssStartChnl;
-#else
- /* map of allowed channels. 0 is dummy */
- // FIXME: remeber to default to a basic channel plan depending of the PHY type
- int channel_map[MAX_CHANNEL_NUMBER+1];
-#endif

int rate; /* current rate */
int basic_rate;
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -44,9 +44,7 @@
#include <linux/ctype.h>

#include "ieee80211.h"
-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats)
@@ -1072,7 +1070,6 @@ static inline int ieee80211_SignalStreng
return RetSS;
}

-#ifdef ENABLE_DOT11D
static inline void ieee80211_extract_country_ie(
struct ieee80211_device *ieee,
struct ieee80211_info_element *info_element,
@@ -1114,7 +1111,6 @@ static inline void ieee80211_extract_cou
}

}
-#endif

int
ieee80211_TranslateToDbm(
@@ -1166,10 +1162,8 @@ inline int ieee80211_network_init(
#ifdef THOMAS_TURBO
network->Turbo_Enable = 0;
#endif
-#ifdef ENABLE_DOT11D
network->CountryIeLen = 0;
memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-#endif

if (stats->freq == IEEE80211_52GHZ_BAND) {
/* for A band (No DS info) */
@@ -1394,14 +1388,12 @@ inline int ieee80211_network_init(
memcpy(network->rsn_ie, info_element,
network->rsn_ie_len);
break;
-#ifdef ENABLE_DOT11D
case MFIE_TYPE_COUNTRY:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
info_element->len);
// printk("=====>Receive <%s> Country IE\n",network->ssid);
ieee80211_extract_country_ie(ieee, info_element, network, beacon->header.addr2);
break;
-#endif
default:
IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
info_element->id);
@@ -1552,10 +1544,8 @@ inline void update_network(struct ieee80
#ifdef THOMAS_TURBO
dst->Turbo_Enable = src->Turbo_Enable;
#endif
-#ifdef ENABLE_DOT11D
dst->CountryIeLen = src->CountryIeLen;
memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
-#endif
}


@@ -1623,7 +1613,6 @@ inline void ieee80211_process_probe_resp
return;
}

-#ifdef ENABLE_DOT11D
// For Asus EeePc request,
// (1) if wireless adapter receive get any 802.11d country code in AP beacon,
// wireless adapter should follow the country code.
@@ -1677,7 +1666,6 @@ inline void ieee80211_process_probe_resp
}
}
}
-#endif
/* The network parsed correctly -- so now we scan our known networks
* to see if we can find it in our list.
*
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -21,9 +21,7 @@
#include <linux/version.h>
#include <asm/uaccess.h>

-#ifdef ENABLE_DOT11D
#include "dot11d.h"
-#endif
u8 rsn_authen_cipher_suite[16][4] = {
{0x00,0x0F,0xAC,0x00}, //Use group key, //Reserved
{0x00,0x0F,0xAC,0x01}, //WEP-40 //RSNA default
@@ -443,10 +441,8 @@ void ieee80211_send_probe_requests(struc
void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
{
short ch = 0;
-#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
down(&ieee->scan_sem);
// printk("==================> Sync scan\n");

@@ -458,11 +454,7 @@ void ieee80211_softmac_scan_syncro(struc
if (ch > MAX_CHANNEL_NUMBER)
goto out; /* scan completed */

-#ifdef ENABLE_DOT11D
}while(!channel_map[ch]);
-#else
- }while(!ieee->channel_map[ch]);
-#endif
/* this fuction can be called in two situations
* 1- We have switched to ad-hoc mode and we are
* performing a complete syncro scan before conclude
@@ -487,9 +479,7 @@ void ieee80211_softmac_scan_syncro(struc

ieee->set_chan(ieee->dev, ch);
// printk("=====>channel=%d ",ch);
-#ifdef ENABLE_DOT11D
if(channel_map[ch] == 1)
-#endif
{
// printk("====send probe request\n");
ieee80211_send_probe_requests(ieee);
@@ -507,20 +497,16 @@ void ieee80211_softmac_scan_syncro(struc
out:
ieee->sync_scan_hurryup = 0;
up(&ieee->scan_sem);
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
DOT11D_ScanComplete(ieee);
-#endif
}

void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
{
int ch;
unsigned int watch_dog = 0;
-#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
down(&ieee->scan_sem);
ch = ieee->current_network.channel;
// if(ieee->sync_scan_hurryup)
@@ -554,16 +540,12 @@ void ieee80211_softmac_ips_scan_syncro(s
{
goto out;
}
-#ifdef ENABLE_DOT11D
if(channel_map[ieee->current_network.channel] > 0)
-#endif
{
ieee->set_chan(ieee->dev, ieee->current_network.channel);
// printk("======>channel=%d ",ieee->current_network.channel);
}
-#ifdef ENABLE_DOT11D
if(channel_map[ieee->current_network.channel] == 1)
-#endif
{
// printk("====send probe request\n");
ieee80211_send_probe_requests(ieee);
@@ -582,11 +564,7 @@ void ieee80211_softmac_ips_scan_syncro(s
goto out; /* scan completed */

ieee->current_network.channel = (ieee->current_network.channel + 1)%MAX_CHANNEL_NUMBER;
-#ifdef ENABLE_DOT11D
}while(!channel_map[ieee->current_network.channel]);
-#else
- }while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
}
out:
//ieee->sync_scan_hurryup = 0;
@@ -594,10 +572,8 @@ out:
//ieee->current_network.channel = ch;
ieee->actscanning = false;
up(&ieee->scan_sem);
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
DOT11D_ScanComplete(ieee);
-#endif
}


@@ -625,10 +601,8 @@ void ieee80211_softmac_scan_wq(struct wo
struct delayed_work *dwork = to_delayed_work(work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
static short watchdog = 0;
-#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
// printk("ieee80211_softmac_scan_wq ENABLE_IPS\n");
// printk("in %s\n",__func__);
down(&ieee->scan_sem);
@@ -639,11 +613,7 @@ void ieee80211_softmac_scan_wq(struct wo
if (watchdog++ > MAX_CHANNEL_NUMBER)
goto out; /* no good chans */

-#ifdef ENABLE_DOT11D
}while(!channel_map[ieee->current_network.channel]);
-#else
- }while(!ieee->channel_map[ieee->current_network.channel]);
-#endif

//printk("current_network.channel:%d\n", ieee->current_network.channel);
if (ieee->scanning == 0 )
@@ -652,9 +622,7 @@ void ieee80211_softmac_scan_wq(struct wo
goto out;
}
ieee->set_chan(ieee->dev, ieee->current_network.channel);
-#ifdef ENABLE_DOT11D
if(channel_map[ieee->current_network.channel] == 1)
-#endif
ieee80211_send_probe_requests(ieee);

queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
@@ -666,10 +634,8 @@ out:
ieee->scanning = 0;
up(&ieee->scan_sem);

-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
DOT11D_ScanComplete(ieee);
-#endif
return;
}
#else
@@ -678,10 +644,8 @@ void ieee80211_softmac_scan_wq(struct wo
struct delayed_work *dwork = to_delayed_work(work);
struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, softmac_scan_wq);
short watchdog = 0;
-#ifdef ENABLE_DOT11D
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
// printk("enter scan wq,watchdog is %d\n",watchdog);
down(&ieee->scan_sem);

@@ -691,11 +655,7 @@ void ieee80211_softmac_scan_wq(struct wo
if (watchdog++ > MAX_CHANNEL_NUMBER)
goto out; /* no good chans */

-#ifdef ENABLE_DOT11D
}while(!channel_map[ieee->current_network.channel]);
-#else
- }while(!ieee->channel_map[ieee->current_network.channel]);
-#endif

// printk("current_network.channel:%d\n", ieee->current_network.channel);
if (ieee->scanning == 0 )
@@ -704,18 +664,14 @@ void ieee80211_softmac_scan_wq(struct wo
goto out;
}
ieee->set_chan(ieee->dev, ieee->current_network.channel);
-#ifdef ENABLE_DOT11D
if(channel_map[ieee->current_network.channel] == 1)
-#endif
ieee80211_send_probe_requests(ieee);

queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
out:
up(&ieee->scan_sem);
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
DOT11D_ScanComplete(ieee);
-#endif
}

#endif
@@ -794,7 +750,6 @@ void ieee80211_stop_scan(struct ieee8021
/* called with ieee->lock held */
void ieee80211_start_scan(struct ieee80211_device *ieee)
{
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee) )
{
if(IS_COUNTRY_IE_VALID(ieee))
@@ -802,7 +757,6 @@ void ieee80211_start_scan(struct ieee802
RESET_CIE_WATCHDOG(ieee);
}
}
-#endif
if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
if (ieee->scanning == 0)
{
@@ -822,7 +776,6 @@ void ieee80211_start_scan(struct ieee802
/* called with wx_sem held */
void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
{
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee) )
{
if(IS_COUNTRY_IE_VALID(ieee))
@@ -830,7 +783,6 @@ void ieee80211_start_scan_syncro(struct
RESET_CIE_WATCHDOG(ieee);
}
}
-#endif
ieee->sync_scan_hurryup = 0;

if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
@@ -2534,10 +2486,8 @@ void ieee80211_start_ibss_wq(struct work
/* check if we have this cell in our network list */
ieee80211_softmac_check_all_nets(ieee);

-#ifdef ENABLE_DOT11D
if(ieee->state == IEEE80211_NOLINK)
ieee->current_network.channel = 10;
-#endif
/* if not then the state is not linked. Maybe the user swithced to
* ad-hoc mode just after being in monitor mode, or just after
* being very few time in managed mode (so the card have had no
@@ -2626,7 +2576,6 @@ inline void ieee80211_start_ibss(struct
void ieee80211_start_bss(struct ieee80211_device *ieee)
{
unsigned long flags;
-#ifdef ENABLE_DOT11D
//
// Ref: 802.11d 11.1.3.3
// STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
@@ -2638,7 +2587,6 @@ void ieee80211_start_bss(struct ieee8021
return;
}
}
-#endif
/* check if we have already found the net we
* are interested in (if any).
* if not (we are disassociated and we are not
@@ -2677,10 +2625,8 @@ void ieee80211_disassociate(struct ieee8
if (ieee->data_hard_stop)
ieee->data_hard_stop(ieee->dev);

-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(ieee))
Dot11d_Reset(ieee);
-#endif
ieee->state = IEEE80211_NOLINK;
ieee->link_change(ieee->dev);
notify_wx_assoc_event(ieee);
@@ -2822,11 +2768,7 @@ void ieee80211_start_protocol(struct iee
if (ch > MAX_CHANNEL_NUMBER)
return; /* no channel found */

-#ifdef ENABLE_DOT11D
}while(!GET_DOT11D_INFO(ieee)->channel_map[ch]);
-#else
- }while(!ieee->channel_map[ch]);
-#endif

ieee->current_network.channel = ch;
}
@@ -2954,9 +2896,7 @@ void ieee80211_softmac_init(struct ieee8
tasklet_init(&ieee->ps_task,
(void(*)(unsigned long)) ieee80211_sta_ps,
(unsigned long)ieee);
-#ifdef ENABLE_DOT11D
ieee->pDot11dInfo = kmalloc(sizeof(RT_DOT11D_INFO), GFP_ATOMIC);
-#endif
}

void ieee80211_softmac_free(struct ieee80211_device *ieee)
@@ -2971,10 +2911,8 @@ void ieee80211_softmac_free(struct ieee8
cancel_delayed_work(&ieee->GPIOChangeRFWorkItem);

destroy_workqueue(ieee->wq);
-#ifdef ENABLE_DOT11D
if(NULL != ieee->pDot11dInfo)
kfree(ieee->pDot11dInfo);
-#endif
up(&ieee->wx_sem);
}

Index: b/drivers/staging/rtl8187se/r8180_core.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -78,9 +78,7 @@ double __extendsfdf2(float a) {return a;
#include "r8180_pm.h"
#endif

-#ifdef ENABLE_DOT11D
#include "ieee80211/dot11d.h"
-#endif

#ifdef CONFIG_RTL8185B
//#define CONFIG_RTL8180_IO_MAP
@@ -3899,7 +3897,6 @@ void watch_dog_adaptive(unsigned long da
// DMESG("<----watch_dog_adaptive()\n");
}

-#ifdef ENABLE_DOT11D

static CHANNEL_LIST ChannelPlan[] = {
{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64},19}, //FCC
@@ -3975,7 +3972,6 @@ static void rtl8180_set_channel_map(u8 c
}
}
}
-#endif

//Add for RF power on power off by lizhaoming 080512
void GPIOChangeRFWorkItemCallBack(struct work_struct *work);
@@ -4003,7 +3999,6 @@ short rtl8180_init(struct net_device *de
u16 tmpu16;
int i, j;

-#ifdef ENABLE_DOT11D
#if 0
for(i=0;i<0xFF;i++) {
if(i%16 == 0)
@@ -4020,21 +4015,6 @@ short rtl8180_init(struct net_device *de

DMESG("Channel plan is %d\n",priv->channel_plan);
rtl8180_set_channel_map(priv->channel_plan, priv->ieee80211);
-#else
- int ch;
- //Set Default Channel Plan
- if(!channels){
- DMESG("No channels, aborting");
- return -1;
- }
- ch=channels;
- priv->channel_plan = 0;//hikaru
- // set channels 1..14 allowed in given locale
- for (i=1; i<=14; i++) {
- (priv->ieee80211->channel_map)[i] = (u8)(ch & 0x01);
- ch >>= 1;
- }
-#endif

//memcpy(priv->stats,0,sizeof(struct Stats));

Index: b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -14,9 +14,7 @@
#include "r8180_rtl8225.h"
#include "r8180_93cx6.h"

-#ifdef ENABLE_DOT11D
#include "ieee80211/dot11d.h"
-#endif

#ifdef CONFIG_RTL8185B

@@ -431,7 +429,6 @@ void rtl8225z2_rf_close(struct net_devic
rtl8185_set_anaparam2(dev, RTL8225z2_ANAPARAM2_OFF);
}

-#ifdef ENABLE_DOT11D
//
// Description:
// Map dBm into Tx power index according to
@@ -502,7 +499,6 @@ DbmToTxPwrIdx(

return TxPwrIdx;
}
-#endif

void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
{
@@ -554,7 +550,6 @@ void rtl8225z2_SetTXPowerLevel(struct ne
CckTxPwrIdx, OfdmTxPwrIdx);
}
#endif
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(priv->ieee80211) &&
IS_DOT11D_STATE_DONE(priv->ieee80211) )
{
@@ -576,7 +571,6 @@ void rtl8225z2_SetTXPowerLevel(struct ne

//priv->CurrentCckTxPwrIdx = cck_power_level;
//priv->CurrentOfdmTxPwrIdx = ofdm_power_level;
-#endif

max_cck_power_level = 15;
max_ofdm_power_level = 25; // 12 -> 25
Index: b/drivers/staging/rtl8187se/r8180_wx.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -22,9 +22,7 @@
#include "r8180_hw.h"
#include "r8180_sa2400.h"

-#ifdef ENABLE_DOT11D
#include "ieee80211/dot11d.h"
-#endif

//#define RATE_COUNT 4
u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
@@ -313,11 +311,7 @@ static int rtl8180_wx_get_range(struct n
for (i = 0, val = 0; i < 14; i++) {

// Include only legal frequencies for some countries
-#ifdef ENABLE_DOT11D
if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
-#else
- if ((priv->ieee80211->channel_map)[i+1]) {
-#endif
range->freq[val].i = i + 1;
range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
range->freq[val].e = 1;
@@ -1189,20 +1183,12 @@ static int r8180_wx_set_channelplan(stru
// Clear old channel map
for (i=1;i<=MAX_CHANNEL_NUMBER;i++)
{
-#ifdef ENABLE_DOT11D
GET_DOT11D_INFO(priv->ieee80211)->channel_map[i] = 0;
-#else
- priv->ieee80211->channel_map[i] = 0;
-#endif
}
// Set new channel map
for (i=1;i<=DefaultChannelPlan[*val].Len;i++)
{
-#ifdef ENABLE_DOT11D
GET_DOT11D_INFO(priv->ieee80211)->channel_map[DefaultChannelPlan[*val].Channel[i-1]] = 1;
-#else
- priv->ieee80211->channel_map[DefaultChannelPlan[*val].Channel[i-1]] = 1;
-#endif
}
}
up(&priv->wx_sem);
Index: b/drivers/staging/rtl8187se/r8185b_init.c
===================================================================
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -34,9 +34,7 @@ Notes:
#include "r8180_pm.h"
#endif

-#ifdef ENABLE_DOT11D
#include "ieee80211/dot11d.h"
-#endif

#ifdef CONFIG_RTL8185B

@@ -2576,10 +2574,8 @@ MgntDisconnect(

// Indication of disassociation event.
//DrvIFIndicateDisassociation(Adapter, asRsn);
-#ifdef ENABLE_DOT11D
if(IS_DOT11D_ENABLE(priv->ieee80211))
Dot11d_Reset(priv->ieee80211);
-#endif
// In adhoc mode, update beacon frame.
if( priv->ieee80211->state == IEEE80211_LINKED )
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/