[PATCH 07/18] Staging: rtl8187se: remove dead code

[Bartlomiej Zolnierkiewicz]

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] Staging: rtl8187se: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/staging/rtl8187se/ieee80211/dot11d.c               |   10 
 drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c      |   13 
 drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c |    7 
 drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c |   19 
 drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c  |    5 
 drivers/staging/rtl8187se/ieee80211/ieee80211_module.c     |   88 --
 drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c         |   56 -
 drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c    |  289 -------
 drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c |   19 
 drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c         |    4 
 drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c         |   63 -
 drivers/staging/rtl8187se/r8180_core.c                     |  522 -------------
 drivers/staging/rtl8187se/r8180_dm.c                       |   12 
 drivers/staging/rtl8187se/r8180_max2820.c                  |   69 -
 drivers/staging/rtl8187se/r8180_rtl8225.c                  |  200 ----
 drivers/staging/rtl8187se/r8180_rtl8225z2.c                |  375 ---------
 drivers/staging/rtl8187se/r8180_rtl8255.c                  |   33 
 drivers/staging/rtl8187se/r8180_wx.c                       |   29 
 drivers/staging/rtl8187se/r8185b_init.c                    |  285 -------
 19 files changed, 13 insertions(+), 2085 deletions(-)

Index: b/drivers/staging/rtl8187se/ieee80211/dot11d.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
@@ -222,13 +222,3 @@ int ToLegalChannel(
 
 	return default_chn;
 }
-
-#if 0
-EXPORT_SYMBOL(Dot11d_Init);
-EXPORT_SYMBOL(Dot11d_Reset);
-EXPORT_SYMBOL(Dot11d_UpdateCountryIe);
-EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);
-EXPORT_SYMBOL(DOT11D_ScanComplete);
-EXPORT_SYMBOL(IsLegalChannel);
-EXPORT_SYMBOL(ToLegalChannel);
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
@@ -247,16 +247,3 @@ void ieee80211_crypto_deinit(void)
 	}
 	kfree(hcrypt);
 }
-
-#if 0
-EXPORT_SYMBOL(ieee80211_crypt_deinit_entries);
-EXPORT_SYMBOL(ieee80211_crypt_deinit_handler);
-EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit);
-
-EXPORT_SYMBOL(ieee80211_register_crypto_ops);
-EXPORT_SYMBOL(ieee80211_unregister_crypto_ops);
-EXPORT_SYMBOL(ieee80211_get_crypto_ops);
-#endif
-
-//module_init(ieee80211_crypto_init);
-//module_exit(ieee80211_crypto_deinit);
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
@@ -472,10 +472,3 @@ void ieee80211_crypto_ccmp_exit(void)
 {
 	ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
 }
-
-#if 0
-EXPORT_SYMBOL(ieee80211_ccmp_null);
-#endif
-
-//module_init(ieee80211_crypto_ccmp_init);
-//module_exit(ieee80211_crypto_ccmp_exit);
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
@@ -327,17 +327,6 @@ static int ieee80211_tkip_encrypt(struct
 		return -1;
 
 	hdr = (struct ieee80211_hdr *) skb->data;
-#if 0
-printk("@@ tkey\n");
-printk("%x|", ((u32*)tkey->key)[0]);
-printk("%x|", ((u32*)tkey->key)[1]);
-printk("%x|", ((u32*)tkey->key)[2]);
-printk("%x|", ((u32*)tkey->key)[3]);
-printk("%x|", ((u32*)tkey->key)[4]);
-printk("%x|", ((u32*)tkey->key)[5]);
-printk("%x|", ((u32*)tkey->key)[6]);
-printk("%x\n", ((u32*)tkey->key)[7]);
-#endif
 
 	if (!tkey->tx_phase1_done) {
 		tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
@@ -767,11 +756,3 @@ void ieee80211_tkip_null(void)
 //    printk("============>%s()\n", __func__);
         return;
 }
-
-#if 0
-EXPORT_SYMBOL(ieee80211_tkip_null);
-#endif
-
-
-//module_init(ieee80211_crypto_tkip_init);
-//module_exit(ieee80211_crypto_tkip_exit);
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
@@ -298,8 +298,3 @@ void ieee80211_wep_null(void)
 //	printk("============>%s()\n", __func__);
         return;
 }
-#if 0
-EXPORT_SYMBOL(ieee80211_wep_null);
-#endif
-//module_init(ieee80211_crypto_wep_init);
-//module_exit(ieee80211_crypto_wep_exit);
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
@@ -210,91 +210,3 @@ void free_ieee80211(struct net_device *d
 
 	free_netdev(dev);
 }
-
-//#ifdef CONFIG_IEEE80211_DEBUG
-#if 0
-
-static int debug = 0;
-u32 ieee80211_debug_level = 0;
-struct proc_dir_entry *ieee80211_proc = NULL;
-
-static int show_debug_level(char *page, char **start, off_t offset,
-			    int count, int *eof, void *data)
-{
-	return snprintf(page, count, "0x%08X\n", ieee80211_debug_level);
-}
-
-static int store_debug_level(struct file *file, const char *buffer,
-			     unsigned long count, void *data)
-{
-	char buf[] = "0x00000000";
-	unsigned long len = min(sizeof(buf) - 1, (u32)count);
-	char *p = (char *)buf;
-	unsigned long val;
-
-	if (copy_from_user(buf, buffer, len))
-		return count;
-	buf[len] = 0;
-	if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
-		p++;
-		if (p[0] == 'x' || p[0] == 'X')
-			p++;
-		val = simple_strtoul(p, &p, 16);
-	} else
-		val = simple_strtoul(p, &p, 10);
-	if (p == buf)
-		printk(KERN_INFO DRV_NAME
-		       ": %s is not in hex or decimal form.\n", buf);
-	else
-		ieee80211_debug_level = val;
-
-	return strnlen(buf, count);
-}
-
-static int __init ieee80211_init(void)
-{
-	struct proc_dir_entry *e;
-
-	ieee80211_debug_level = debug;
-	ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, proc_net);
-	if (ieee80211_proc == NULL) {
-		IEEE80211_ERROR("Unable to create " DRV_NAME
-				" proc directory\n");
-		return -EIO;
-	}
-	e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
-			      ieee80211_proc);
-	if (!e) {
-		remove_proc_entry(DRV_NAME, proc_net);
-		ieee80211_proc = NULL;
-		return -EIO;
-	}
-	e->read_proc = show_debug_level;
-	e->write_proc = store_debug_level;
-	e->data = NULL;
-
-	return 0;
-}
-
-static void __exit ieee80211_exit(void)
-{
-	if (ieee80211_proc) {
-		remove_proc_entry("debug_level", ieee80211_proc);
-		remove_proc_entry(DRV_NAME, proc_net);
-		ieee80211_proc = NULL;
-	}
-}
-
-#include <linux/moduleparam.h>
-module_param(debug, int, 0444);
-MODULE_PARM_DESC(debug, "debug output mask");
-
-
-module_exit(ieee80211_exit);
-module_init(ieee80211_init);
-#endif
-
-#if 0
-EXPORT_SYMBOL(alloc_ieee80211);
-EXPORT_SYMBOL(free_ieee80211);
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -650,22 +650,6 @@ int ieee80211_rx(struct ieee80211_device
 
 
 	if (type == IEEE80211_FTYPE_MGMT) {
-
-	#if 0
-		if ( stype == IEEE80211_STYPE_AUTH &&
-		    fc & IEEE80211_FCTL_WEP && ieee->host_decrypt &&
-		    (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0)
-		{
-			printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
-			       "from " MAC_FMT "\n", dev->name,
-			       MAC_ARG(hdr->addr2));
-			/* TODO: could inform hostapd about this so that it
-			 * could send auth failure report */
-			goto rx_dropped;
-		}
-	#endif
-
-
 		if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
 			goto rx_dropped;
 		else
@@ -1077,15 +1061,6 @@ static inline void ieee80211_extract_cou
 	u8 * addr2
 )
 {
-#if 0
-	u32 i = 0;
-	u8 * p = (u8*)info_element->data;
-	printk("-----------------------\n");
-	printk("%s Country IE:", network->ssid);
-	for(i=0; i<info_element->len; i++)
-		printk("\t%2.2x", *(p+i));
-	printk("\n-----------------------\n");
-#endif
 	if(IS_DOT11D_ENABLE(ieee))
 	{
 		if(info_element->len!= 0)
@@ -1277,11 +1252,8 @@ inline int ieee80211_network_init(
 
 			if(ieee->state != IEEE80211_LINKED)
 				break;
-#if 0
-			network->last_dtim_sta_time[0] = stats->mac_time[0];
-#else
+
 			network->last_dtim_sta_time[0] = jiffies;
-#endif
 			network->last_dtim_sta_time[1] = stats->mac_time[1];
 
 			network->dtim_data = IEEE80211_DTIM_VALID;
@@ -1425,9 +1397,7 @@ inline int ieee80211_network_init(
 
 	if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
 		network->flags |= NETWORK_EMPTY_ESSID;
-#if 0
-	stats->signal = ieee80211_SignalStrengthTranslate(stats->signal);
-#endif
+
 	stats->signal = ieee80211_TranslateToDbm(stats->signalstrength);
 	//stats->noise = stats->signal - stats->noise;
 	stats->noise = ieee80211_TranslateToDbm(100 - stats->signalstrength) - 25;
@@ -1581,21 +1551,7 @@ inline void ieee80211_process_probe_resp
 		(beacon->capability & (1<<0x2)) ? '1' : '0',
 		(beacon->capability & (1<<0x1)) ? '1' : '0',
 		(beacon->capability & (1<<0x0)) ? '1' : '0');
-#if 0
-	if(strcmp(escape_essid(beacon->info_element.data, beacon->info_element.len), "rtl_softap") == 0)
-	{
-		if(WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON)
-		{
-			u32 i = 0, len = stats->len;
-			u8 * p = (u8*)beacon;
-			printk("-----------------------\n");
-			printk("rtl_softap Beacon:");
-			for(i=0; i<len; i++)
-				printk("\t%2.2x", *(p+i));
-			printk("\n-----------------------\n");
-		}
-	}
-#endif
+
 	if (ieee80211_network_init(ieee, beacon, &network, stats)) {
 		IEEE80211_DEBUG_SCAN("Dropped '%s' (" MAC_FMT ") via %s.\n",
 				     escape_essid(info_element->data,
@@ -1781,9 +1737,3 @@ void ieee80211_rx_mgt(struct ieee80211_d
 		break;
 	}
 }
-
-#if 0
-EXPORT_SYMBOL(ieee80211_rx_mgt);
-EXPORT_SYMBOL(ieee80211_rx);
-EXPORT_SYMBOL(ieee80211_network_init);
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -574,25 +574,6 @@ out:
 		DOT11D_ScanComplete(ieee);
 }
 
-
-#if 0
-/* called both by wq with ieee->lock held */
-void ieee80211_softmac_scan(struct ieee80211_device *ieee)
-{
-	short watchdog = 0;
-
-	do{
-		ieee->current_network.channel =
-			(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
-		if (watchdog++ > MAX_CHANNEL_NUMBER)
-				return; /* no good chans */
-
-	}while(!ieee->channel_map[ieee->current_network.channel]);
-
-
-	schedule_work(&ieee->softmac_scan_wq);
-}
-#endif
 #ifdef ENABLE_IPS
 void ieee80211_softmac_scan_wq(struct work_struct *work)
 {
@@ -1172,206 +1153,10 @@ inline struct sk_buff *ieee80211_associa
 
 	//add rsn==0 condition for ap's mix security mode(wpa+wpa2), john2007.8.9
 	//choose AES encryption as default algorithm while using mixed mode
-#if 0
-	if(rsn_len == 0){
-
-		tag = skb_put(skb,wpa_len);
-
-		if(wpa_len) {
-
-
-		  //{add by david. 2006.8.31
-		  //fix linksys compatibility bug
-		  //}
-		  if(wpa_len > 24) {//22+2, mean include the capability
-			beacon->wpa_ie[wpa_len - 2] = 0;
-		  }
-		//multicast cipher OUI
-                  if(  beacon->wpa_ie[11]==0x2      ){ //0x0050f202 is the oui of tkip
-                  ieee->broadcast_key_type = KEY_TYPE_TKIP;
-                }
-                  else if(  beacon->wpa_ie[11]==0x4      ){//0x0050f204 is the oui of ccmp
-                  ieee->broadcast_key_type = KEY_TYPE_CCMP;
-                }
- 		//unicast cipher OUI
-		  if(	beacon->wpa_ie[14]==0
-			&& beacon->wpa_ie[15]==0x50
-                        && beacon->wpa_ie[16]==0xf2
-                        && beacon->wpa_ie[17]==0x2  	){ //0x0050f202 is the oui of tkip
-                  ieee->pairwise_key_type = KEY_TYPE_TKIP;
-		}
-
-                  else if(   beacon->wpa_ie[14]==0
-                        && beacon->wpa_ie[15]==0x50
-                        && beacon->wpa_ie[16]==0xf2
-                        && beacon->wpa_ie[17]==0x4      ){//0x0050f204 is the oui of ccmp
-                  ieee->pairwise_key_type = KEY_TYPE_CCMP;
-		}
-		//indicate the wpa_ie content to WPA_SUPPLICANT
-		buff = kmalloc(IW_CUSTOM_MAX, GFP_ATOMIC);
-		memset(buff, 0, IW_CUSTOM_MAX);
-		p=buff;
-		p += sprintf(p, "ASSOCINFO(ReqIEs=");
-		for(i=0;i<wpa_len;i++){
-			p += sprintf(p, "%02x", beacon->wpa_ie[i]);
-		}
-		p += sprintf(p, ")");
-		memset(&wrqu, 0, sizeof(wrqu) );
-		wrqu.data.length = p - buff;
-
-		wireless_send_event(dev, IWEVCUSTOM, &wrqu, buff);
-		  memcpy(tag,beacon->wpa_ie,wpa_len);
-		}
-
-	}
-
-	if(rsn_len > 22) {
-
-	  					if(     beacon->rsn_ie[4]==0x0 &&
-                                beacon->rsn_ie[5]==0xf &&
-                                beacon->rsn_ie[6]==0xac){
-
-                                switch(beacon->rsn_ie[7]){
-                                        case 0x1:
-                                                ieee->broadcast_key_type = KEY_TYPE_WEP40;
-                                                break;
-                                        case 0x2:
-                                                ieee->broadcast_key_type = KEY_TYPE_TKIP;
-                                                break;
-                                        case 0x4:
-                                                ieee->broadcast_key_type = KEY_TYPE_CCMP;
-                                                break;
-                                        case 0x5:
-                                                ieee->broadcast_key_type = KEY_TYPE_WEP104;
-                                                break;
-                                        default:
-                                                printk("fault suite type in RSN broadcast key\n");
-                                                break;
-                                }
-                        }
-
-                        if(     beacon->rsn_ie[10]==0x0 &&
-                                beacon->rsn_ie[11]==0xf &&
-                                beacon->rsn_ie[12]==0xac){
-				if(beacon->rsn_ie[8]==1){//not mixed mode
-	                                switch(beacon->rsn_ie[13]){
-        	                                case 0x2:
-                	                                ieee->pairwise_key_type = KEY_TYPE_TKIP;
-                        	                        break;
-                                	        case 0x4:
-                                        	        ieee->pairwise_key_type = KEY_TYPE_CCMP;
-                                                	break;
-        	                                default:
-	                                                printk("fault suite type in RSN pairwise key\n");
-                	                                break;
-                                	}
-				}
-				else if(beacon->rsn_ie[8]==2){//mixed mode
-					ieee->pairwise_key_type = KEY_TYPE_CCMP;
-				}
-                        }
 
-
-
-		tag = skb_put(skb,22);
-		memcpy(tag,(beacon->rsn_ie + info_addr),8);
-		tag[1] =  20;
-		tag += 8;
-		info_addr += 8;
-
-		spin_lock_irqsave(&ieee->wpax_suitlist_lock,flags);
-		for (i = 0; i < 2; i++) {
-			tag[0] = 1;
-			tag[1] = 0;
-			tag += 2;
-			suite_count = beacon->rsn_ie[info_addr] + \
-				      (beacon->rsn_ie[info_addr + 1] << 8);
-			info_addr += 2;
-			if(1 == suite_count) {
-				memcpy(tag,(beacon->rsn_ie + info_addr),4);
-				info_addr += 4;
-			} else {
-				// if the wpax_type_notify has been set by the application,
-				// just use it, otherwise just use the default one.
-				if(ieee->wpax_type_set) {
-					suit_select = ((0 == i) ? pairwise_type:authen_type)&0x0f ;
-					memcpy(tag,rsn_authen_cipher_suite[suit_select],4);
-				} else {
-					//default set as ccmp, or none authentication
-					if(i == 0) {
-						memcpy(tag,rsn_authen_cipher_suite[4],4);
-					} else {
-						memcpy(tag,rsn_authen_cipher_suite[2],4);
-					}
-
-				}
-
-				info_addr += (suite_count * 4);
-			}
-			tag += 4;
-		}
-		spin_unlock_irqrestore(&ieee->wpax_suitlist_lock,flags);
-
-		tag[0] = 0;
-		tag[1] = beacon->rsn_ie[info_addr+1];
-
-	} else {
-		tag = skb_put(skb,rsn_len);
-		if(rsn_len) {
-
-
-			if( 	beacon->rsn_ie[4]==0x0 &&
-				beacon->rsn_ie[5]==0xf &&
-				beacon->rsn_ie[6]==0xac){
-				switch(beacon->rsn_ie[7]){
-					case 0x1:
-						ieee->broadcast_key_type = KEY_TYPE_WEP40;
-                                                break;
-					case 0x2:
-						ieee->broadcast_key_type = KEY_TYPE_TKIP;
-						break;
-					case 0x4:
-   	                                        ieee->broadcast_key_type = KEY_TYPE_CCMP;
-                                                break;
-                                        case 0x5:
-                                                ieee->broadcast_key_type = KEY_TYPE_WEP104;
-                                                break;
-					default:
-						printk("fault suite type in RSN broadcast key\n");
-						break;
-				}
-			}
-                        if(     beacon->rsn_ie[10]==0x0 &&
-                                beacon->rsn_ie[11]==0xf &&
-                                beacon->rsn_ie[12]==0xac){
-                                if(beacon->rsn_ie[8]==1){//not mixed mode
-                                        switch(beacon->rsn_ie[13]){
-                                                case 0x2:
-                                                        ieee->pairwise_key_type = KEY_TYPE_TKIP;
-                                                        break;
-                                                case 0x4:
-                                                        ieee->pairwise_key_type = KEY_TYPE_CCMP;
-                                                        break;
-                                                default:
-                                                        printk("fault suite type in RSN pairwise key\n");
-                                                        break;
-                                	}
-
-				}
-                                else if(beacon->rsn_ie[8]==2){//mixed mode
-                                        ieee->pairwise_key_type = KEY_TYPE_CCMP;
-                                }
-                        }
-
-
-			beacon->rsn_ie[rsn_len - 2] = 0;
-			memcpy(tag,beacon->rsn_ie,rsn_len);
-		}
-	}
-#else
 	tag = skb_put(skb,ieee->wpa_ie_len);
 	memcpy(tag,ieee->wpa_ie,ieee->wpa_ie_len);
-#endif
+
 	tag = skb_put(skb,wmm_info_len);
 	if(wmm_info_len) {
 	  ieee80211_WMM_Info(ieee, &tag);
@@ -1827,12 +1612,6 @@ ieee80211_rx_assoc_rq(struct ieee80211_d
 	}
 
 	printk(KERN_INFO"New client associated: "MAC_FMT"\n", MAC_ARG(dest));
-	//FIXME
-	#if 0
-	spin_lock_irqsave(&ieee->lock,flags);
-	add_associate(ieee,dest);
-	spin_unlock_irqrestore(&ieee->lock,flags);
-	#endif
 }
 
 
@@ -1850,11 +1629,8 @@ void ieee80211_sta_ps_send_null_frame(st
 
 short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *time_l)
 {
-#if 0
-        int timeout = ieee->ps_timeout;
-#else
         int timeout = 0;
-#endif
+
 	u8 dtim;
 	/*if(ieee->ps == IEEE80211_PS_DISABLED ||
 		ieee->iw_mode != IW_MODE_INFRA ||
@@ -1885,13 +1661,7 @@ short ieee80211_sta_ps_sleep(struct ieee
 	if((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE ) &&
 		(ieee->mgmt_queue_tail != ieee->mgmt_queue_head))
 		return 0;
-#if 0
-	if(time_l){
-		*time_l = ieee->current_network.last_dtim_sta_time[0]
-			+ (ieee->current_network.beacon_interval
-			* ieee->current_network.dtim_period) * 1000;
-	}
-#else
+
 	if(time_l){
 		*time_l = ieee->current_network.last_dtim_sta_time[0]
 			+ MSECS((ieee->current_network.beacon_interval));
@@ -1899,7 +1669,6 @@ short ieee80211_sta_ps_sleep(struct ieee
 			//printk("beacon_interval:%x, dtim_period:%x, totol to Msecs:%x, HZ:%x\n", ieee->current_network.beacon_interval, ieee->current_network.dtim_period, MSECS(((ieee->current_network.beacon_interval * ieee->current_network.dtim_period))), HZ);
 	}
 
-#endif
 	if(time_h){
 		*time_h = ieee->current_network.last_dtim_sta_time[1];
 		if(time_l && *time_l < ieee->current_network.last_dtim_sta_time[0])
@@ -2247,29 +2016,6 @@ void ieee80211_softmac_xmit(struct ieee8
 	int  i;
 
 	spin_lock_irqsave(&ieee->lock,flags);
-	#if 0
-	if(ieee->queue_stop){
-		IEEE80211DMESG("EE: IEEE hard_start_xmit invoked when kernel queue should be stopped");
-		netif_stop_queue(ieee->dev);
-		ieee->ieee_stats.swtxstop++;
-		//dev_kfree_skb_any(skb);
-		err = 1;
-		goto exit;
-	}
-
-	ieee->stats.tx_bytes+=skb->len;
-
-
-	txb=ieee80211_skb_to_txb(ieee,skb);
-
-
-	if(txb==NULL){
-		IEEE80211DMESG("WW: IEEE stack failed to provide txb");
-		//dev_kfree_skb_any(skb);
-		err = 1;
-		goto exit;
-	}
-	#endif
 
 	/* called with 2nd parm 0, no tx mgmt lock required */
 	ieee80211_sta_wakeup(ieee,0);
@@ -2844,11 +2590,7 @@ void ieee80211_softmac_init(struct ieee8
 //by amy
 
 	init_mgmt_queue(ieee);
-#if 0
-	init_timer(&ieee->scan_timer);
-	ieee->scan_timer.data = (unsigned long)ieee;
-	ieee->scan_timer.function = ieee80211_softmac_scan_cb;
-#endif
+
 	ieee->tx_pending.txb = NULL;
 
 	init_timer(&ieee->associate_timer);
@@ -3306,26 +3048,3 @@ void notify_wx_assoc_event(struct ieee80
 		memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
 	wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
 }
-
-
-#if 0
-EXPORT_SYMBOL(ieee80211_get_beacon);
-EXPORT_SYMBOL(ieee80211_wake_queue);
-EXPORT_SYMBOL(ieee80211_stop_queue);
-EXPORT_SYMBOL(ieee80211_reset_queue);
-EXPORT_SYMBOL(ieee80211_softmac_stop_protocol);
-EXPORT_SYMBOL(ieee80211_softmac_start_protocol);
-EXPORT_SYMBOL(ieee80211_is_shortslot);
-EXPORT_SYMBOL(ieee80211_is_54g);
-EXPORT_SYMBOL(ieee80211_wpa_supplicant_ioctl);
-EXPORT_SYMBOL(ieee80211_ps_tx_ack);
-EXPORT_SYMBOL(ieee80211_start_protocol);
-EXPORT_SYMBOL(ieee80211_stop_protocol);
-EXPORT_SYMBOL(notify_wx_assoc_event);
-EXPORT_SYMBOL(ieee80211_stop_send_beacons);
-EXPORT_SYMBOL(SendDisassociation);
-EXPORT_SYMBOL(ieee80211_disassociate);
-EXPORT_SYMBOL(ieee80211_start_scan);
-EXPORT_SYMBOL(ieee80211_softmac_ips_scan_syncro);
-EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame);
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -570,22 +570,3 @@ exit:
 	return ret;
 
 }
-
-#if 0
-EXPORT_SYMBOL(ieee80211_wx_get_essid);
-EXPORT_SYMBOL(ieee80211_wx_set_essid);
-EXPORT_SYMBOL(ieee80211_wx_set_rate);
-EXPORT_SYMBOL(ieee80211_wx_get_rate);
-EXPORT_SYMBOL(ieee80211_wx_set_wap);
-EXPORT_SYMBOL(ieee80211_wx_get_wap);
-EXPORT_SYMBOL(ieee80211_wx_set_mode);
-EXPORT_SYMBOL(ieee80211_wx_get_mode);
-EXPORT_SYMBOL(ieee80211_wx_set_scan);
-EXPORT_SYMBOL(ieee80211_wx_get_freq);
-EXPORT_SYMBOL(ieee80211_wx_set_freq);
-EXPORT_SYMBOL(ieee80211_wx_set_rawtx);
-EXPORT_SYMBOL(ieee80211_wx_get_name);
-EXPORT_SYMBOL(ieee80211_wx_set_power);
-EXPORT_SYMBOL(ieee80211_wx_get_power);
-EXPORT_SYMBOL(ieee80211_wlan_frequencies);
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -585,7 +585,3 @@ int ieee80211_xmit(struct sk_buff *skb,
 	return NETDEV_TX_BUSY;
 
 }
-
-#if 0
-EXPORT_SYMBOL(ieee80211_txb_free);
-#endif
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -174,33 +174,6 @@ static inline char *rtl818x_translate_sc
 	if (iwe.u.data.length)
 		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
 
-#if 0
-	if (ieee->wpa_enabled && network->wpa_ie_len){
-		char buf[MAX_WPA_IE_LEN * 2 + 30];
-	//	printk("WPA IE\n");
-		u8 *p = buf;
-		p += sprintf(p, "wpa_ie=");
-		for (i = 0; i < network->wpa_ie_len; i++) {
-			p += sprintf(p, "%02x", network->wpa_ie[i]);
-		}
-
-		memset(&iwe, 0, sizeof(iwe));
-		iwe.cmd = IWEVCUSTOM;
-		iwe.u.data.length = strlen(buf);
-		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-	}
-
-	if (ieee->wpa_enabled && network->rsn_ie_len){
-		char buf[MAX_WPA_IE_LEN * 2 + 30];
-
-		u8 *p = buf;
-		p += sprintf(p, "rsn_ie=");
-		for (i = 0; i < network->rsn_ie_len; i++) {
-			p += sprintf(p, "%02x", network->rsn_ie[i]);
-		}
-
-
-#else
 		memset(&iwe, 0, sizeof(iwe));
         if (network->wpa_ie_len) {
 	//	printk("wpa_ie_len:%d\n", network->wpa_ie_len);
@@ -214,14 +187,6 @@ static inline char *rtl818x_translate_sc
         memset(&iwe, 0, sizeof(iwe));
         if (network->rsn_ie_len) {
 	//	printk("=====>rsn_ie_len:\n", network->rsn_ie_len);
-		#if 0
-		{
-			int i;
-			for (i=0; i<network->rsn_ie_len; i++);
-			printk("%2x ", network->rsn_ie[i]);
-			printk("\n");
-		}
-		#endif
                 char buf[MAX_WPA_IE_LEN];
                 memcpy(buf, network->rsn_ie, network->rsn_ie_len);
                 iwe.cmd = IWEVGENIE;
@@ -229,8 +194,6 @@ static inline char *rtl818x_translate_sc
 		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
 	}
 
-#endif
-
 	/* Add EXTRA: Age to display seconds since last beacon/probe response
 	 * for given network. */
 	iwe.cmd = IWEVCUSTOM;
@@ -578,12 +541,7 @@ int ieee80211_wx_set_encode_ext(struct i
 
 	sec.enabled = 1;
     //    sec.encrypt = 1;
-#if 0
-        if (group_key ? !ieee->host_mc_decrypt :
-            !(ieee->host_encrypt || ieee->host_decrypt ||
-              ieee->host_encrypt_msdu))
-                goto skip_host_crypt;
-#endif
+
         switch (ext->alg) {
         case IW_ENCODE_ALG_WEP:
                 alg = "WEP";
@@ -769,15 +727,6 @@ int ieee80211_wx_set_auth(struct ieee802
 #if 1
 int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
 {
-#if 0
-	printk("====>%s()\n", __func__);
-	{
-		int i;
-		for (i=0; i<len; i++)
-		printk("%2x ", ie[i]&0xff);
-		printk("\n");
-	}
-#endif
 	u8 *buf = NULL;
 
 	if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
@@ -812,13 +761,3 @@ int ieee80211_wx_set_gen_ie(struct ieee8
 
 }
 #endif
-
-#if 0
-EXPORT_SYMBOL(ieee80211_wx_set_gen_ie);
-EXPORT_SYMBOL(ieee80211_wx_set_mlme);
-EXPORT_SYMBOL(ieee80211_wx_set_auth);
-EXPORT_SYMBOL(ieee80211_wx_set_encode_ext);
-EXPORT_SYMBOL(ieee80211_wx_get_scan);
-EXPORT_SYMBOL(ieee80211_wx_set_encode);
-EXPORT_SYMBOL(ieee80211_wx_get_encode);
-#endif
Index: b/drivers/staging/rtl8187se/r8180_core.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -24,16 +24,6 @@
    add RTL8185 and RTL8225 support, and to David Young also.
 */
 
-#if 0
-double __floatsidf (int i) { return i; }
-unsigned int __fixunsdfsi (double d) { return d; }
-double __adddf3(double a, double b) { return a+b; }
-double __addsf3(float a, float b) { return a+b; }
-double __subdf3(double a, double b) { return a-b; }
-double __extendsfdf2(float a) {return a;}
-#endif
-
-
 #undef DEBUG_TX_DESC2
 #undef RX_DONT_PASS_UL
 #undef DEBUG_EPROM
@@ -93,36 +83,6 @@ static struct pci_device_id rtl8180_pci_
                 .subdevice = PCI_ANY_ID,
                 .driver_data = 0,
         },
-#if 0
-        {
-                .vendor = PCI_VENDOR_ID_BELKIN,
-                .device = 0x6001,
-                .subvendor = PCI_ANY_ID,
-                .subdevice = PCI_ANY_ID,
-                .driver_data = 1,
-        },
-        {       /* Belkin F5D6020 v3 */
-	        .vendor = PCI_VENDOR_ID_BELKIN,
-                .device = 0x6020,
-                .subvendor = PCI_ANY_ID,
-                .subdevice = PCI_ANY_ID,
-                .driver_data = 2,
-        },
-        {       /* D-Link DWL-610 */
-                .vendor = PCI_VENDOR_ID_DLINK,
-                .device = 0x3300,
-                .subvendor = PCI_ANY_ID,
-                .subdevice = PCI_ANY_ID,
-                .driver_data = 3,
-        },
-	{
-		.vendor = PCI_VENDOR_ID_REALTEK,
-		.device = 0x8185,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = 4,
-	},
-#endif
         {
                 .vendor = 0,
                 .device = 0,
@@ -360,82 +320,6 @@ static int proc_get_stats_rx(char *page,
 	return len;
 }
 
-#if 0
-static int proc_get_stats_ieee(char *page, char **start,
-			  off_t offset, int count,
-			  int *eof, void *data)
-{
-	struct net_device *dev = data;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	int len = 0;
-
-	len += snprintf(page + len, count - len,
-		"TXed association requests: %u\n"
-		"TXed authentication requests: %u\n"
-		"RXed successful association response: %u\n"
-		"RXed failed association response: %u\n"
-		"RXed successful authentication response: %u\n"
-		"RXed failed authentication response: %u\n"
-		"Association requests without response: %u\n"
-		"Authentication requests without response: %u\n"
-		"TX probe response: %u\n"
-		"RX probe request: %u\n"
-		"TX probe request: %lu\n"
-		"RX authentication requests: %lu\n"
-		"RX association requests: %lu\n"
-		"Reassociations: %lu\n",
-		priv->ieee80211->ieee_stats.tx_ass,
-		priv->ieee80211->ieee_stats.tx_aut,
-		priv->ieee80211->ieee_stats.rx_ass_ok,
-		priv->ieee80211->ieee_stats.rx_ass_err,
-		priv->ieee80211->ieee_stats.rx_aut_ok,
-		priv->ieee80211->ieee_stats.rx_aut_err,
-		priv->ieee80211->ieee_stats.ass_noresp,
-		priv->ieee80211->ieee_stats.aut_noresp,
-		priv->ieee80211->ieee_stats.tx_probe,
-		priv->ieee80211->ieee_stats.rx_probe,
-		priv->ieee80211->ieee_stats.tx_probe_rq,
-		priv->ieee80211->ieee_stats.rx_auth_rq,
-		priv->ieee80211->ieee_stats.rx_assoc_rq,
-		priv->ieee80211->ieee_stats.reassoc);
-
-	*eof = 1;
-	return len;
-}
-#endif
-#if 0
-static int proc_get_stats_ap(char *page, char **start,
-			  off_t offset, int count,
-			  int *eof, void *data)
-{
-	struct net_device *dev = data;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct mac_htable_t *list;
-	int i;
-	int len = 0;
-
-	if(priv->ieee80211->iw_mode != IW_MODE_MASTER){
-		len += snprintf(page + len, count - len,
-		"Card is not acting as AP...\n"
-		);
-	}else{
-		len += snprintf(page + len, count - len,
-		"List of associated STA:\n"
-		);
-
-		for(i=0;i<MAC_HTABLE_ENTRY;i++)
-			for (list = priv->ieee80211->assoc_htable[i]; list!=NULL; list = list->next){
-				len += snprintf(page + len, count - len,
-					MACSTR"\n",MAC2STR(list->adr));
-			}
-
-	}
-	*eof = 1;
-	return len;
-}
-#endif
-
 static int proc_get_stats_tx(char *page, char **start,
 			  off_t offset, int count,
 			  int *eof, void *data)
@@ -561,26 +445,6 @@ void rtl8180_proc_init_one(struct net_de
 		      "/proc/net/r8180/%s/stats-tx\n",
 		      dev->name);
 	}
-	#if 0
-	e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO,
-				   priv->dir_dev, proc_get_stats_ieee, dev);
-
-	if (!e) {
-		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-ieee\n",
-		      dev->name);
-	}
-	#endif
-	#if 0
-	e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
-				   priv->dir_dev, proc_get_stats_ap, dev);
-
-	if (!e) {
-		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-ap\n",
-		      dev->name);
-	}
-	#endif
 
 	e = create_proc_read_entry("registers", S_IFREG | S_IRUGO,
 				   priv->dir_dev, proc_get_registers, dev);
@@ -731,10 +595,6 @@ int get_curr_tx_free_desc(struct net_dev
 
 	/* FIXME FIXME FIXME FIXME */
 
-#if 0
-	if( head <= tail ) return priv->txringcount-1 - (tail - head)/8;
-	return (head - tail)/8/4;
-#else
 	if( head <= tail )
 		ret = priv->txringcount - (tail - head)/8;
 	else
@@ -742,7 +602,6 @@ int get_curr_tx_free_desc(struct net_dev
 
 	if(ret > priv->txringcount ) DMESG("BUG");
 	return ret;
-#endif
 }
 
 
@@ -1540,34 +1399,6 @@ void rtl8180_rtx_disable(struct net_devi
 		dev_kfree_skb_any(priv->rx_skb);
 }
 
-#if 0
-int alloc_tx_beacon_desc_ring(struct net_device *dev, int count)
-{
-	int i;
-	u32 *tmp;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	priv->txbeaconring = (u32*)pci_alloc_consistent(priv->pdev,
-					  sizeof(u32)*8*count,
-					  &priv->txbeaconringdma);
-	if (!priv->txbeaconring) return -1;
-	for (tmp=priv->txbeaconring,i=0;i<count;i++){
-		*tmp = *tmp &~ (1<<31); // descriptor empty, owned by the drv
-		/*
-		*(tmp+2) = (u32)dma_tmp;
-		*(tmp+3) = bufsize;
-		*/
-		if(i+1<count)
-			*(tmp+4) = (u32)priv->txbeaconringdma+((i+1)*8*4);
-		else
-			*(tmp+4) = (u32)priv->txbeaconringdma;
-
-		tmp=tmp+8;
-	}
-	return 0;
-}
-#endif
-
 short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
 			 int addr)
 {
@@ -1601,28 +1432,6 @@ short alloc_tx_desc_ring(struct net_devi
 		if (buf == NULL) return -ENOMEM;
 
 		switch(addr) {
-#if 0
-		case TX_NORMPRIORITY_RING_ADDR:
-			if(-1 == buffer_add(&(priv->txnpbufs),buf,dma_tmp,NULL)){
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-
-		case TX_LOWPRIORITY_RING_ADDR:
-			if(-1 == buffer_add(&(priv->txlpbufs),buf,dma_tmp,NULL)){
-				DMESGE("Unable to allocate mem for buffer LP");
-				return -ENOMEM;
-			}
-			break;
-
-		case TX_HIGHPRIORITY_RING_ADDR:
-			if(-1 == buffer_add(&(priv->txhpbufs),buf,dma_tmp,NULL)){
-				DMESGE("Unable to allocate mem for buffer HP");
-				return -ENOMEM;
-			}
-			break;
-#else
 		case TX_MANAGEPRIORITY_RING_ADDR:
 			if(-1 == buffer_add(&(priv->txmapbufs),buf,dma_tmp,NULL)){
 				DMESGE("Unable to allocate mem for buffer NP");
@@ -1655,7 +1464,6 @@ short alloc_tx_desc_ring(struct net_devi
 				return -ENOMEM;
 			}
 			break;
-#endif
 		case TX_HIGHPRIORITY_RING_ADDR:
 			if(-1 == buffer_add(&(priv->txhpbufs),buf,dma_tmp,NULL)){
 				DMESGE("Unable to allocate mem for buffer HP");
@@ -1764,22 +1572,6 @@ void free_tx_desc_rings(struct net_devic
 	buffer_free(dev,&(priv->txbeaconbufs),priv->txbuffsize,1);
 }
 
-#if 0
-void free_beacon_desc_ring(struct net_device *dev,int count)
-{
-
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev=priv->pdev;
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbeaconring, priv->txbeaconringdma);
-
-	if (priv->beacon_buf)
-		pci_free_consistent(priv->pdev,
-			priv->master_beaconsize,priv->beacon_buf,priv->beacondmabuf);
-
-}
-#endif
 void free_rx_desc_ring(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -2247,39 +2039,6 @@ void rtl8180_rx(struct net_device *dev)
 
 		}else{*/
 
-		#if 0
-		/* Maybe it is possible that the NIC has skipped some descriptors or
-		 * it has reset its internal pointer to the beginning of the ring
-		 * we search for the first filled descriptor in the ring, or we break
-		 * putting again the pointer in the old location if we do not found any.
-		 * This is quite dangerous, what does happen if the nic writes
-		 * two descriptor (say A and B) when we have just checked the descriptor
-		 * A and we are going to check the descriptor B..This might happen if the
-		 * interrupt was dummy, there was not really filled descriptors and
-		 * the NIC didn't lose pointer
-		 */
-
-		//priv->stats.rxwrkaround++;
-
-		tmp = priv->rxringtail;
-		while (*(priv->rxringtail) & (1<<31)){
-
-			priv->rxringtail+=4;
-
-			if(priv->rxringtail >=
-				(priv->rxring)+(priv->rxringcount )*4)
-				priv->rxringtail=priv->rxring;
-
-			priv->rxbuffer=(priv->rxbuffer->next);
-
-			if(priv->rxringtail == tmp ){
-				//DMESG("EE: Could not find RX pointer");
-				priv->stats.rxnopointer++;
-				break;
-			}
-		}
-		#else
-
 		tmp2 = NULL;
 		tmp = priv->rxringtail;
 		do{
@@ -2294,7 +2053,6 @@ void rtl8180_rx(struct net_device *dev)
 		}while(tmp != priv->rxring);
 
 		if(tmp2) priv->rxringtail = tmp2;
-		#endif
 		//}
 	}
 
@@ -2529,30 +2287,6 @@ void rtl8180_rx(struct net_device *dev)
 			/* support for prism header has been originally added by Christian */
 			if(priv->prism_hdr && priv->ieee80211->iw_mode == IW_MODE_MONITOR){
 
-#if 0
-				priv->rx_skb = dev_alloc_skb(len+2+PRISM_HDR_SIZE);
-				if(! priv->rx_skb) goto drop;
-
-				prism_hdr = (u32*) skb_put(priv->rx_skb,PRISM_HDR_SIZE);
-				prism_hdr[0]=htonl(0x80211001);        //version
-				prism_hdr[1]=htonl(0x40);              //length
-				prism_hdr[2]=htonl(stats.mac_time[1]);    //mactime (HIGH)
-				prism_hdr[3]=htonl(stats.mac_time[0]);    //mactime (LOW)
-				rdtsc(prism_hdr[5], prism_hdr[4]);         //hostime (LOW+HIGH)
-				prism_hdr[4]=htonl(prism_hdr[4]);          //Byte-Order aendern
-				prism_hdr[5]=htonl(prism_hdr[5]);          //Byte-Order aendern
-				prism_hdr[6]=0x00;                     //phytype
-				prism_hdr[7]=htonl(priv->chan);        //channel
-				prism_hdr[8]=htonl(stats.rate);        //datarate
-				prism_hdr[9]=0x00;                     //antenna
-				prism_hdr[10]=0x00;                    //priority
-				prism_hdr[11]=0x00;                    //ssi_type
-				prism_hdr[12]=htonl(stats.signal);     //ssi_signal
-				prism_hdr[13]=htonl(stats.noise);      //ssi_noise
-				prism_hdr[14]=0x00;                    //preamble
-				prism_hdr[15]=0x00;                    //encoding
-
-#endif
 			}else{
 				priv->rx_skb = dev_alloc_skb(len+2);
 				if( !priv->rx_skb) goto drop;
@@ -2737,21 +2471,6 @@ void rtl8180_dma_kick(struct net_device 
 	force_pci_posting(dev);
 }
 
-#if 0
-void rtl8180_tx_queues_stop(struct net_device *dev)
-{
-	//struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8 dma_poll_mask = (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
-	dma_poll_mask |= (1<<TX_DMA_STOP_HIPRIORITY_SHIFT);
-	dma_poll_mask |= (1<<TX_DMA_STOP_NORMPRIORITY_SHIFT);
-	dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
-
-	rtl8180_set_mode(dev,EPROM_CMD_CONFIG);
-	write_nic_byte(dev,TX_DMA_POLLING,dma_poll_mask);
-	rtl8180_set_mode(dev,EPROM_CMD_NORMAL);
-}
-#endif
-
 void rtl8180_data_hard_stop(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -2938,39 +2657,6 @@ void rtl8180_prepare_beacon(struct net_d
 			0,0,ieeerate2rtlrate(priv->ieee80211->basic_rate));
 		dev_kfree_skb_any(skb);
 	}
-	#if 0
-	//DMESG("size %x",len);
-	if(*tail & (1<<31)){
-
-		//DMESG("No more beacon TX desc");
-		return ;
-
-	}
-	//while(! (*tail & (1<<31))){
-		*tail= 0; // zeroes header
-
-		*tail = *tail| (1<<29) ; //fist segment of the packet
-		*tail = (*tail) | (1<<28); // last segment
-	//	*tail = *tail | (1<<18); // this is  a beacon frame
-		*(tail+3)=*(tail+3) &~ 0xfff;
-		*(tail+3)=*(tail+3) | len; // buffer lenght
-		*tail = *tail |len;
-		// zeroes the second 32-bits dword of the descriptor
-		*(tail+1)= 0;
-		*tail = *tail | (rate << 24);
-
-			duration = rtl8180_len2duration(len,rate,&ext);
-
-		*(tail+1) = *(tail+1) | ((duration & 0x7fff)<<16);
-
-		*tail = *tail | (1<<31);
-		//^ descriptor ready to be txed
-		if((tail - begin)/8 == priv->txbeaconcount-1)
-			tail=begin;
-		else
-			tail=tail+8;
-	//}
-#endif
 }
 
 /* This function do the real dirty work: it enqueues a TX command
@@ -3233,21 +2919,6 @@ short rtl8180_tx(struct net_device *dev,
 		//DMESG("rate %d",rate);
 
 		if(priv->card_8185){
-
-			#if 0
-			*(tail+5)&= ~(1<<24); /* tx ant 0 */
-
-			*(tail+5) &= ~(1<<23); /* random tx agc 23-16 */
-			*(tail+5) |= (1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16);
-
-			*(tail+5) &=
-~((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8));
-			*(tail+5) |= (7<<8); // Max retry limit
-
-			*(tail+5) &= ~((1<<7)|(1<<6)|(1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|(1<<0));
-			*(tail+5) |= (8<<4); // Max contention window
-			*(tail+6) |= 4; // Min contention window
-			#endif
            //    	*(tail+5) = 0;
 		}
 
@@ -3387,29 +3058,6 @@ void rtl8180_link_change(struct net_devi
 	u16 = u16 &~ ATIM_MASK;
 	u16 = u16 | beacon->atim;
 	*/
-#if 0
-	if (net->capability & WLAN_CAPABILITY_PRIVACY) {
-		if (priv->hw_wep) {
-			DMESG("Enabling hardware WEP support");
-			rtl8180_set_hw_wep(dev);
-			priv->ieee80211->host_encrypt=0;
-			priv->ieee80211->host_decrypt=0;
-		}
-#ifndef CONFIG_IEEE80211_NOWEP
-		else {
-			priv->ieee80211->host_encrypt=1;
-			priv->ieee80211->host_decrypt=1;
-		}
-#endif
-	}
-#ifndef CONFIG_IEEE80211_NOWEP
-	else{
-		priv->ieee80211->host_encrypt=0;
-		priv->ieee80211->host_decrypt=0;
-	}
-#endif
-#endif
-
 
 	if(priv->card_8185)
 		rtl8180_set_chan(dev, priv->chan);
@@ -3811,13 +3459,6 @@ short rtl8180_init(struct net_device *de
 	u16 tmpu16;
 	int i, j;
 
-#if 0
-	for(i=0;i<0xFF;i++) {
-		if(i%16 == 0)
-			printk("\n[%x]: ", i/16);
-		printk("\t%4.4x", eprom_read(dev,i));
-	}
-#endif
 	priv->channel_plan = eprom_read(dev, EEPROM_COUNTRY_CODE>>1) & 0xFF;
 	if(priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN){
 		printk("rtl8180_init:Error channel plan! Set to default.\n");
@@ -3853,39 +3494,8 @@ short rtl8180_init(struct net_device *de
 	priv->irq_enabled=0;
 
 //YJ,modified,080828
-#if 0
-	priv->stats.rxdmafail=0;
-	priv->stats.txrdu=0;
-	priv->stats.rxrdu=0;
-	priv->stats.rxnolast=0;
-	priv->stats.rxnodata=0;
-	//priv->stats.rxreset=0;
-	//priv->stats.rxwrkaround=0;
-	priv->stats.rxnopointer=0;
-	priv->stats.txnperr=0;
-	priv->stats.txresumed=0;
-	priv->stats.rxerr=0;
-	priv->stats.rxoverflow=0;
-	priv->stats.rxint=0;
-	priv->stats.txnpokint=0;
-	priv->stats.txhpokint=0;
-	priv->stats.txhperr=0;
-	priv->stats.ints=0;
-	priv->stats.shints=0;
-	priv->stats.txoverflow=0;
-	priv->stats.txbeacon=0;
-	priv->stats.txbeaconerr=0;
-	priv->stats.txlperr=0;
-	priv->stats.txlpokint=0;
-	priv->stats.txretry=0;//tony 20060601
-	priv->stats.rxcrcerrmin=0;
-	priv->stats.rxcrcerrmid=0;
-	priv->stats.rxcrcerrmax=0;
-	priv->stats.rxicverr=0;
-#else
 	rtl8180_statistics_init(&priv->stats);
 	rtl8180_link_detect_init(&priv->link_detect);
-#endif
 //YJ,modified,080828,end
 
 
@@ -4532,24 +4142,13 @@ void rtl8185_write_phy(struct net_device
 	adr |= 0x80;
 
 	phyw= ((data<<8) | adr);
-#if 0
-
-	write_nic_dword(dev, PHY_ADR, phyw);
-
-	//read_nic_dword(dev, PHY_ADR);
-	for(i=0;i<10;i++){
-		write_nic_dword(dev, PHY_ADR, 0xffffff7f & phyw);
-		phyr = read_nic_byte(dev, PHY_READ);
-		if(phyr == (data&0xff)) break;
 
-	}
-#else
 	// Note that, we must write 0xff7c after 0x7d-0x7f to write BB register.
 	write_nic_byte(dev, 0x7f, ((phyw & 0xff000000) >> 24));
 	write_nic_byte(dev, 0x7e, ((phyw & 0x00ff0000) >> 16));
 	write_nic_byte(dev, 0x7d, ((phyw & 0x0000ff00) >> 8));
 	write_nic_byte(dev, 0x7c, ((phyw & 0x000000ff) ));
-#endif
+
 	/* this is ok to fail when we write AGC table. check for AGC table might be
 	 * done by masking with 0x7f instead of 0xff
 	 */
@@ -4806,19 +4405,7 @@ void rtl8180_start_tx_beacon(struct net_
 	rtl8180_prepare_beacon(dev);
 	rtl8180_irq_disable(dev);
 	rtl8180_beacon_tx_enable(dev);
-#if 0
-	rtl8180_set_mode(dev,EPROM_CMD_CONFIG);
-	//write_nic_byte(dev,0x9d,0x20); //DMA Poll
-	//write_nic_word(dev,0x7a,0);
-	//write_nic_word(dev,0x7a,0x8000);
 
-#if 0
-	word  = read_nic_word(dev, BcnItv);
-	word &= ~BcnItv_BcnItv; // clear Bcn_Itv
-	word |= priv->ieee80211->current_network.beacon_interval;//0x64;
-	write_nic_word(dev, BcnItv, word);
-#endif
-#endif
 	word = read_nic_word(dev, AtimWnd) &~ AtimWnd_AtimWnd;
 	write_nic_word(dev, AtimWnd,word);// word |=
 //priv->ieee80211->current_network.atim_window);
@@ -4887,16 +4474,7 @@ MgntActSet_802_11_PowerSaveMode(
 //	priv->dot11PowerSaveMode = rtPsMode;
 	priv->ieee80211->ps = rtPsMode;
 	// Determine ListenInterval.
-#if 0
-	if(priv->dot11PowerSaveMode == eMaxPs)
-	{
-		priv->ieee80211->ListenInterval = 10;
-	}
-	else
-	{
-		priv->ieee80211->ListenInterval = 2;
-	}
-#endif
+
 	return true;
 }
 
@@ -5058,31 +4636,6 @@ void rtl8180_watch_dog(struct net_device
 	}
 #endif
 
-#if 0
-#ifndef ENABLE_LPS
-	if(priv->ieee80211->state == IEEE80211_LINKED){
-		if(	priv->NumRxOkInPeriod> 666 ||
-			priv->NumTxOkInPeriod > 666 ) {
-			bBusyTraffic = true;
-		}
-		if((priv->ieee80211->NumRxData + priv->NumTxOkInPeriod)<8) {
-			bEnterPS= true;
-		}
-		if(bEnterPS) {
-			LeisurePSEnter(priv);
-		}
-		else {
-			LeisurePSLeave(priv);
-		}
-	}
-	else	{
-		LeisurePSLeave(priv);
-	}
-#endif
-	priv->NumRxOkInPeriod = 0;
-	priv->NumTxOkInPeriod = 0;
-	priv->ieee80211->NumRxData = 0;
-#else
 #ifdef ENABLE_LPS
 	if(priv->ieee80211->state == IEEE80211_LINKED){
 		priv->link_detect.NumRxOkInPeriod = priv->ieee80211->NumRxDataInPeriod;
@@ -5115,7 +4668,6 @@ void rtl8180_watch_dog(struct net_device
 	priv->link_detect.NumTxOkInPeriod = 0;
 	priv->ieee80211->NumRxDataInPeriod = 0;
 	priv->ieee80211->NumRxBcnInPeriod = 0;
-#endif
 }
 int _rtl8180_up(struct net_device *dev)
 {
@@ -5288,21 +4840,6 @@ static void r8180_set_multicast(struct n
 	//up(&priv->wx_sem);
 }
 
-#if 0
-/* this is called by the kernel when it needs to TX a 802.3 encapsulated frame*/
-int rtl8180_8023_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->tx_lock,flags);
-	ret = ieee80211_r8180_8023_hardstartxmit(skb,priv->ieee80211);
-	spin_unlock_irqrestore(&priv->tx_lock,flags);
-	return ret;
-}
-#endif
-
 int r8180_set_mac_adr(struct net_device *dev, void *mac)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -5766,20 +5303,7 @@ priv->txnpring)/8);
 		else
 			head+=8;
 	}
-#if 0
-	if(nicv == begin)
-		txdv = begin + (priv->txringcount -1)*8;
-	else
-		txdv = nicv - 8;
 
-	txed = !(txdv[0] &(1<<31));
-
-	if(txed){
-		if(!(txdv[0] & (1<<15))) error = 1;
-		//if(!(txdv[0] & (1<<30))) error = 1;
-		if(error)DMESG("%x",txdv[0]);
- 	}
-#endif
 	//DMESG("%x",txdv[0]);
 	/* the head has been moved to the last certainly TXed
 	 * (or at least processed by the nic) packet.
@@ -6131,14 +5655,6 @@ void GPIOChangeRFWorkItemCallBack(struct
 
 	readf_count = (readf_count+1)%0xffff;
 #endif
-#if 0
-	if(priv->up == 0)//driver stopped
-		{
-			printk("\nDo nothing...");
-			goto out;
-		}
-	else
-#endif
 		{
 			// We should turn off LED before polling FF51[4].
 
@@ -6193,40 +5709,6 @@ void GPIOChangeRFWorkItemCallBack(struct
 
 static u8 read_acadapter_file(char *filename)
 {
-#if 0
-	int fd;
-	char buf[1];
-	char ret[50];
-	int i = 0;
-	int n = 0;
-	mm_segment_t old_fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	fd = sys_open(filename, O_RDONLY, 0);
-	if (fd >= 0) {
-		while (sys_read(fd, buf, 1) == 1)
-		{
-			i++;
-			if(i>10)
-			{
-				if(buf[0]!=' ')
-				{
-					ret[n]=buf[0];
-					n++;
-				}
-			}
-		}
-		sys_close(fd);
-	}
-	ret[n]='\0';
-//	printk("%s \n", ret);
-	set_fs(old_fs);
-
-	if(strncmp(ret, "off-line",8) == 0)
-	{
-		return 1;
-	}
-#endif
 	return 0;
 }
 
Index: b/drivers/staging/rtl8187se/r8180_dm.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -1380,12 +1380,6 @@ SwitchAntenna(
 
 	if(priv->CurrAntennaIndex == 0)
 	{
-#if 0//lzm del 080826
-//by amy 080312
-		if(priv->bSwAntennaDiverity)
-			bResult = SetAntennaConfig87SE(dev, 1, true);
-		else
-#endif
 			bResult = SetAntenna8185(dev, 1);
 //by amy 080312
 //		printk("SwitchAntenna(): switching to antenna 1 ......\n");
@@ -1393,12 +1387,6 @@ SwitchAntenna(
 	}
 	else
 	{
-#if 0//lzm del 080826
-//by amy 080312
-		if(priv->bSwAntennaDiverity)
-			bResult = SetAntennaConfig87SE(dev, 0, true);
-		else
-#endif
 			bResult = SetAntenna8185(dev, 0);
 //by amy 080312
 //		printk("SwitchAntenna(): switching to antenna 0 ......\n");
Index: b/drivers/staging/rtl8187se/r8180_max2820.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_max2820.c
+++ b/drivers/staging/rtl8187se/r8180_max2820.c
@@ -50,75 +50,6 @@ u32 maxim_chan[] = {
 	84, //14
 };
 
-#if 0
-/* maxim expects 4 bit address MSF, then 12 bit data MSF*/
-void write_maxim(struct net_device *dev,u8 adr, u32 data)
-{
-
-	int shift;
-	short bit;
-	u16 word;
-
-	adr = adr &0xf;
-	word = (u16)data & 0xfff;
-	word |= (adr<<12);
-	/*write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | BB_HOST_BANG_EN);
-	read_nic_dword(dev,PHY_CONFIG);
-	mdelay(1);
-
-	write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | BB_HOST_BANG_EN | BB_HOST_BANG_CLK);
-	read_nic_dword(dev,PHY_CONFIG);
-	mdelay(1);
-	*/
-
-	/* MAX2820 will sample data on rising edge of clock */
-	for(shift = 15;shift >=0; shift--){
-		bit = word>>shift & 1;
-
-		write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA));
-
-		read_nic_dword(dev,PHY_CONFIG);
-		mdelay(2);
-
-		write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG |
-		(bit<<BB_HOST_BANG_DATA) | BB_HOST_BANG_CLK); /* sample data */
-
-		read_nic_dword(dev,PHY_CONFIG);
-		mdelay(1);
-
-		write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG |
-		(bit<<BB_HOST_BANG_DATA));
-
-		read_nic_dword(dev,PHY_CONFIG);
-		mdelay(2);
-
-	}
-	write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA)|
-					BB_HOST_BANG_EN);
-	read_nic_dword(dev,PHY_CONFIG);
-	mdelay(2);
-
-	/* The shift register fill flush to the requested register the
-	 * last 12 bits data shifted in
-	 */
-	write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA)|
-					BB_HOST_BANG_EN | BB_HOST_BANG_CLK);
-	read_nic_dword(dev,PHY_CONFIG);
-	mdelay(2);
-
-	write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA)|
-					BB_HOST_BANG_EN);
-	read_nic_dword(dev,PHY_CONFIG);
-	mdelay(2);
-
-
-#ifdef DEBUG_MAXIM
-	DMESG("Writing maxim: %x (adr %x)",phy_config,adr);
-#endif
-
-}
-#endif
-
 void write_maxim(struct net_device *dev,u8 adr, u32 data) {
 	u32 temp;
 	temp =  0x90 + (data & 0xf);
Index: b/drivers/staging/rtl8187se/r8180_rtl8225.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8225.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225.c
@@ -26,18 +26,6 @@ u8 rtl8225_gain[]={
 	0x63,0x58,0x70,0xc5,// -66dbm
 };
 
-#if 0
-u8 rtl8225_init_gain[]={
-	//0x00,0x00,0x00,0x00,//0x00,0x00,0x00,0x00,
-	0x33,0x80,0x6c,0xc5,//0x00,0x49,0x06,0xb5,//Gain = 0 ~ -78dbm
-	0x43,0x78,0x69,0xc5,//0x00,0x45,0x06,0xb1,//Gain = 1 ~ -74dbm
-	0x53,0x60,0x66,0xc5,//0x00,0x41,0x06,0xab,//Gain = 2 ~ -70dbm
-	0x63,0x58,0x63,0xc5,//0x00,0x3d,0x06,0xa5,//Gain = 3 ~ -66dbm
-	0x73,0x50,0x62,0xc5,//0x00,0x39,0x06,0xa1,//Gain = 4 ~ -62dbm
-	0x83,0x43,0x61,0xc5,//0x00,0x35,0x06,0x9b,//Gain = 5 ~ -58dbm
-	0x93,0x38,0x5a,0xc5,//0x00,0x31,0x06,0x99,//Gain = 6 ~ -54dbm
-};
-#endif
 u32 rtl8225_chan[] ={
               0,
 		0x0080, //ch1
@@ -72,41 +60,6 @@ u16 rtl8225bcd_rxgain[]={
 
 };
 
-
-#if 0
-u16 rtl8225bc_rxgain[]={
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x039a, 0x039b, 0x039c, 0x039d,
-	0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
-	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
-	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
-
-};
-
-
-u16 rtl8225a_rxgain[]={
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad,
-	0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad
-};
-#endif
-
 u8 rtl8225_agc[]={
 	0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96,
 	0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86,
@@ -156,40 +109,6 @@ void rtl8225_set_gain(struct net_device 
 	write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]);
 	write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]);
 }
-#if 0
-
-void rtl8225_set_gain(struct net_device *dev, short gain)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
-	if(priv->card_8185 == 2)
-		write_phy_ofdm(dev, 0x21, 0x27);
-	else
-		write_phy_ofdm(dev, 0x21, 0x37);
-
-	write_phy_ofdm(dev, 0x25, 0x20);
-	write_phy_ofdm(dev, 0x11, 0x6);
-
-	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-		write_phy_ofdm(dev, 0x27, 0x8);
-	else
-		write_phy_ofdm(dev, 0x27, 0x88);
-
-	write_phy_ofdm(dev, 0x14, 0);
-	write_phy_ofdm(dev, 0x16, 0);
-	write_phy_ofdm(dev, 0x15, 0x40);
-	write_phy_ofdm(dev, 0x17, 0x40);
-
-	write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]);
-	write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]);
-	write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]);
-	write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]);
-	//rtl8225_set_gain_usb(dev, gain);
-}
-#endif
-
 
 void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
 {
@@ -366,14 +285,7 @@ void rtl8225_SetTXPowerLevel(struct net_
 	mdelay(1);
 	//write_nic_byte(dev, TX_AGC_CONTROL,4);
 }
-#if 0
-/* switch between mode B and G */
-void rtl8225_set_mode(struct net_device *dev, short modeb)
-{
-	write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40));
-	write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40));
-}
-#endif
+
 void rtl8225_rf_set_chan(struct net_device *dev, short ch)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -441,33 +353,6 @@ void rtl8225_host_pci_init(struct net_de
 
 void rtl8225_host_usb_init(struct net_device *dev)
 {
-	#if 0
-	write_nic_byte(dev,RFPinsSelect+1,0);
-
-	write_nic_byte(dev,GPIO,0);
-
-	write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7));
-
-	write_nic_byte(dev,RFPinsSelect+1,4);
-
-	write_nic_byte(dev,GPIO,0x20);
-
-	write_nic_byte(dev,GP_ENABLE,0);
-
-
-	/* Config BB & RF */
-	write_nic_word(dev, RFPinsOutput, 0x80);
-
-	write_nic_word(dev, RFPinsSelect, 0x80);
-
-	write_nic_word(dev, RFPinsEnable, 0x80);
-
-
-	mdelay(100);
-
-	mdelay(1000);
-#endif
-
 }
 
 void rtl8225_rf_sleep(struct net_device *dev)
@@ -511,20 +396,6 @@ void rtl8225_rf_init(struct net_device *
 
 	write_nic_word(dev, BRSR, 0xffff);
 
-	#if 0
-	if(priv->card_8185 == 1){/* version C or B */
-		if(priv->card_8185_Bversion)  /* version B*/
-			write_nic_dword(dev, RF_PARA, 0x44);
-		else    /* version C */
-			write_nic_dword(dev, RF_PARA, 0x100044);
-	}else{ /* version D */
-		if(priv->enable_gpio0)
-			write_nic_dword(dev, RF_PARA, 0x20100044);
-		else /* also USB */
-			write_nic_dword(dev, RF_PARA, 0x100044);
-	}
-	#endif
-
 	write_nic_dword(dev, RF_PARA, 0x100044);
 
 	#if 1  //0->1
@@ -555,13 +426,6 @@ void rtl8225_rf_init(struct net_device *
 
 	mdelay(1);
 
-
-	#if 0
-	}else if(priv->phy_ver == 1){
-		/* version A */
-		write_rtl8225(dev, 0x5, 0xbc0 + 2);
-	}else{
-	#endif
 	/* version B & C */
 
 	if(priv->card_type == USB)
@@ -628,12 +492,6 @@ void rtl8225_rf_init(struct net_device *
 	for(i=0;i<95;i++){
 		write_rtl8225(dev, 0x1, (u8)(i+1));
 
-		#if 0
-		if(priv->phy_ver == 1)
-			/* version A */
-			write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]);
-		else
-		#endif
 		/* version B & C & D*/
 
 		write_rtl8225(dev, 0x2, rtl8225bcd_rxgain[i]);
@@ -681,18 +539,6 @@ void rtl8225_rf_init(struct net_device *
 	write_phy_ofdm(dev, 0x8, 0x40); mdelay(1);
 	write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1);
 
-	#if 0
-	if(priv->card_type == USB){
-		write_phy_ofdm(dev, 0xa, 0x9);
-	}else{
-		if(priv->card_8185 == 1 && priv->card_8185_Bversion){
-			/* Ver B
-			* maybe later version can accept this also?
-			*/
-			write_phy_ofdm(dev, 0xa, 0x6);
-			write_phy_ofdm(dev, 0x18, 0x6f);
-		}else{
-	#endif
 			/* ver C & D */
 	write_phy_ofdm(dev, 0xa, 0x9); mdelay(1);
 
@@ -710,14 +556,6 @@ void rtl8225_rf_init(struct net_device *
 	write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
 
 
-	#if 0
-	if(priv->card_8185 == 1){
-		if(priv->card_8185_Bversion)
-			write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/
-		else
-			write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/
-	}else{
-	#endif
 	write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
 /*ver D & 8187*/
 //	}
@@ -738,13 +576,6 @@ void rtl8225_rf_init(struct net_device *
 
 	write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
 
-#if 0
-	}else{
-		/* Ver B & C*/
-		write_phy_ofdm(dev, 0x12, 0x0);
-		write_phy_ofdm(dev, 0x13, 0x0);
-	}
-#endif
 	write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
 	write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
 	write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
@@ -769,20 +600,6 @@ void rtl8225_rf_init(struct net_device *
 
 	write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1);
 
-#if 0
-	if(priv->card_8185 == 1){
-		if(priv->card_8185_Bversion){
-			/*ver B*/
-			write_phy_ofdm(dev, 0x1e, 0x95);
-			write_phy_ofdm(dev, 0x1f, 0x55);
-		}else{
-			/*ver C*/
-			write_phy_ofdm(dev, 0x1e, 0x90);
-			write_phy_ofdm(dev, 0x1f, 0x34);
-
-		}
-	}else{
-#endif
 		/*ver D & 8187*/
 	write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1);
 
@@ -802,11 +619,6 @@ void rtl8225_rf_init(struct net_device *
 	write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
 	write_phy_ofdm(dev, 0x25, 0x20); mdelay(1);
 	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
-#if 0
-	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-		write_phy_ofdm(dev, 0x27, 0x08); /* Ver B. might work also fo ver C&D ?*/
-	else
-#endif
 	write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
 /* Ver C & D & 8187*/
 
@@ -824,11 +636,6 @@ void rtl8225_rf_init(struct net_device *
 	write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
 	write_phy_cck(dev, 0x5, 0x12); mdelay(1);
 	write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
-#if 0
-	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-		write_phy_cck(dev, 0x7, 0xd8); /* Ver B */
-	else
-#endif
 	write_phy_cck(dev, 0x7, 0x78);mdelay(1);
  /* Ver C & D & 8187*/
 
@@ -837,11 +644,6 @@ void rtl8225_rf_init(struct net_device *
 	write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
 	write_phy_cck(dev, 0x11, 0x88); mdelay(1);
 	write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-#if 0
-	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-		write_phy_cck(dev, 0x13, 0x98); /* Ver B */
-	else
-#endif
 	write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
 
 	write_phy_cck(dev, 0x19, 0x0);
Index: b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -46,26 +46,6 @@ u8 rtl8225z2_gain_a[]={
 	0x63,0x24,0x4f,//,0x37,// -70dbm
 	0x73,0x0f,0x4c,//,0x37,// -66dbm
 };
-#if 0
-u32 rtl8225_chan[] = {
-	0,	//dummy channel 0
-	0x085c, //1
-	0x08dc, //2
-	0x095c, //3
-	0x09dc, //4
-	0x0a5c, //5
-	0x0adc, //6
-	0x0b5c, //7
-	0x0bdc, //8
-	0x0c5c, //9
-	0x0cdc, //10
-	0x0d5c, //11
-	0x0ddc, //12
-	0x0e5c, //13
-	//0x0f5c, //14
-	0x0f72, // 14
-};
-#endif
 
 //-
 u16 rtl8225z2_rxgain[]={
@@ -94,19 +74,6 @@ u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[]={
         0x1e,0x1f,0x20,0x21,0x22,0x23,
 };
 
-#if 0
-//-
-u8 rtl8225_agc[]={
-	0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96,
-	0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86,
-	0x85,0x84,0x83,0x82,0x81,0x80,0x3f,0x3e,0x3d,0x3c,0x3b,0x3a,0x39,0x38,0x37,0x36,
-	0x35,0x34,0x33,0x32,0x31,0x30,0x2f,0x2e,0x2d,0x2c,0x2b,0x2a,0x29,0x28,0x27,0x26,
-	0x25,0x24,0x23,0x22,0x21,0x20,0x1f,0x1e,0x1d,0x1c,0x1b,0x1a,0x19,0x18,0x17,0x16,
-	0x15,0x14,0x13,0x12,0x11,0x10,0x0f,0x0e,0x0d,0x0c,0x0b,0x0a,0x09,0x08,0x07,0x06,
-	0x05,0x04,0x03,0x02,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
-	0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
-};
-#endif
 /*
  from 0 to 0x23
 u8 rtl8225_tx_gain_cck_ofdm[]={
@@ -155,40 +122,6 @@ void rtl8225z2_set_gain(struct net_devic
 
 }
 
-#if 0
-
-void rtl8225_set_gain(struct net_device *dev, short gain)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
-	if(priv->card_8185 == 2)
-		write_phy_ofdm(dev, 0x21, 0x27);
-	else
-		write_phy_ofdm(dev, 0x21, 0x37);
-
-	write_phy_ofdm(dev, 0x25, 0x20);
-	write_phy_ofdm(dev, 0x11, 0x6);
-
-	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-		write_phy_ofdm(dev, 0x27, 0x8);
-	else
-		write_phy_ofdm(dev, 0x27, 0x88);
-
-	write_phy_ofdm(dev, 0x14, 0);
-	write_phy_ofdm(dev, 0x16, 0);
-	write_phy_ofdm(dev, 0x15, 0x40);
-	write_phy_ofdm(dev, 0x17, 0x40);
-
-	write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]);
-	write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]);
-	write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]);
-	write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]);
-	//rtl8225_set_gain_usb(dev, gain);
-}
-#endif
-
 u32 read_rtl8225(struct net_device *dev, u8 adr)
 {
 	u32 data2Write = ((u32)(adr & 0x1f)) << 27;
@@ -284,76 +217,7 @@ u32 read_rtl8225(struct net_device *dev,
 	return dataRead;
 
 }
-#if 0
-void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
-{
-	int i;
-	u16 out,select;
-	u8 bit;
-	u32 bangdata = (data << 4) | (adr & 0xf);
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	out = read_nic_word(dev, RFPinsOutput) & 0xfff3;
-
-	write_nic_word(dev,RFPinsEnable,
-		(read_nic_word(dev,RFPinsEnable) | 0x7));
-
-	select = read_nic_word(dev, RFPinsSelect);
-
-	write_nic_word(dev, RFPinsSelect, select | 0x7 |
-		((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO));
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN );//| 0x1fff);
-
-	force_pci_posting(dev);
-	udelay(2);
-
-	write_nic_word(dev, RFPinsOutput, out);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-
-	for(i=15; i>=0;i--){
-
-		bit = (bangdata & (1<<i)) >> i;
-
-		write_nic_word(dev, RFPinsOutput, bit | out);
-
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
-		i--;
-		bit = (bangdata & (1<<i)) >> i;
-
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
-		write_nic_word(dev, RFPinsOutput, bit | out);
 
-	}
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	write_nic_word(dev, RFPinsOutput, out |
-		((priv->card_type == USB) ? 4 : BB_HOST_BANG_EN));
-
-	write_nic_word(dev, RFPinsSelect, select |
-		((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO));
-
-	if(priv->card_type == USB)
-		mdelay(2);
-	else
-		rtl8185_rf_pins_enable(dev);
-}
-
-#endif
 short rtl8225_is_V_z2(struct net_device *dev)
 {
 	short vz2 = 1;
@@ -364,13 +228,7 @@ short rtl8225_is_V_z2(struct net_device 
 
 	/* reg 8 pg 1 = 23*/
 	//printk(KERN_WARNING "RF Rigisters:\n");
-#if 0
-	for(i = 0; i <= 0xf; i++)
-		printk(KERN_WARNING "%08x,", read_rtl8225(dev, i));
-	//printk(KERN_WARNING "reg[9]@pg1 = 0x%x\n", read_rtl8225(dev, 0x0F));
 
-//	printk(KERN_WARNING "RF:\n");
-#endif
 	if( read_rtl8225(dev, 8) != 0x588)
 		vz2 = 0;
 
@@ -385,38 +243,6 @@ short rtl8225_is_V_z2(struct net_device 
 
 }
 
-#if 0
-void rtl8225_rf_close(struct net_device *dev)
-{
-	write_rtl8225(dev, 0x4, 0x1f);
-
-	force_pci_posting(dev);
-	mdelay(1);
-
-	rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_OFF);
-	rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_OFF);
-}
-#endif
-#if 0
-short rtl8225_rf_set_sens(struct net_device *dev, short sens)
-{
-	if (sens <0 || sens > 6) return -1;
-
-	if(sens > 4)
-		write_rtl8225(dev, 0x0c, 0x850);
-	else
-		write_rtl8225(dev, 0x0c, 0x50);
-
-	sens= 6-sens;
-	rtl8225_set_gain(dev, sens);
-
-	write_phy_cck(dev, 0x41, rtl8225_threshold[sens]);
-	return 0;
-
-}
-#endif
-
-
 void rtl8225z2_rf_close(struct net_device *dev)
 {
 	RF_WriteReg(dev, 0x4, 0x1f);
@@ -514,39 +340,7 @@ void rtl8225z2_SetTXPowerLevel(struct ne
 //	u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];//-by amy 080312
 	char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);//+by amy 080312
 	char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);//+by amy 080312
-#if 0
-	//
-	// CCX 2 S31, AP control of client transmit power:
-	// 1. We shall not exceed Cell Power Limit as possible as we can.
-	// 2. Tolerance is +/- 5dB.
-	// 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit.
-	//
-	// TODO:
-	// 1. 802.11h power contraint
-	//
-	// 071011, by rcnjko.
-	//
-	if(	priv->OpMode == RT_OP_MODE_INFRASTRUCTURE &&
-		priv->bWithCcxCellPwr &&
-		ch == priv->dot11CurrentChannelNumber)
-	{
-		u8 CckCellPwrIdx = DbmToTxPwrIdx(dev, WIRELESS_MODE_B, pMgntInfo->CcxCellPwr);
-		u8 OfdmCellPwrIdx = DbmToTxPwrIdx(dev, WIRELESS_MODE_G, pMgntInfo->CcxCellPwr);
-
-		printk("CCX Cell Limit: %d dBm => CCK Tx power index : %d, OFDM Tx power index: %d\n",
-			priv->CcxCellPwr, CckCellPwrIdx, OfdmCellPwrIdx);
-		printk("EEPROM channel(%d) => CCK Tx power index: %d, OFDM Tx power index: %d\n",
-			channel, CckTxPwrIdx, OfdmTxPwrIdx);
-
-		if(cck_power_level > CckCellPwrIdx)
-			cck_power_level = CckCellPwrIdx;
-		if(ofdm_power_level > OfdmCellPwrIdx)
-			ofdm_power_level = OfdmCellPwrIdx;
 
-		printk("Altered CCK Tx power index : %d, OFDM Tx power index: %d\n",
-			CckTxPwrIdx, OfdmTxPwrIdx);
-	}
-#endif
 	if(IS_DOT11D_ENABLE(priv->ieee80211) &&
 		IS_DOT11D_STATE_DONE(priv->ieee80211) )
 	{
@@ -642,14 +436,6 @@ void rtl8225z2_SetTXPowerLevel(struct ne
 	mdelay(1);
 
 }
-#if 0
-/* switch between mode B and G */
-void rtl8225_set_mode(struct net_device *dev, short modeb)
-{
-	write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40));
-	write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40));
-}
-#endif
 
 void rtl8225z2_rf_set_chan(struct net_device *dev, short ch)
 {
@@ -672,86 +458,8 @@ void rtl8225z2_rf_set_chan(struct net_de
 
 	force_pci_posting(dev);
 	mdelay(10);
-//deleted by David : 2006/8/9
-#if 0
-	write_nic_byte(dev,SIFS,0x22);// SIFS: 0x22
-
-	if(gset)
-		write_nic_byte(dev,DIFS,20); //DIFS: 20
-	else
-		write_nic_byte(dev,DIFS,0x24); //DIFS: 36
-
-	if(priv->ieee80211->state == IEEE80211_LINKED &&
-		ieee80211_is_shortslot(priv->ieee80211->current_network))
-		write_nic_byte(dev,SLOT,0x9); //SLOT: 9
-
-	else
-		write_nic_byte(dev,SLOT,0x14); //SLOT: 20 (0x14)
-
-
-	if(gset){
-		write_nic_byte(dev,EIFS,91 - 20); // EIFS: 91 (0x5B)
-		write_nic_byte(dev,CW_VAL,0x73); //CW VALUE: 0x37
-		//DMESG("using G net params");
-	}else{
-		write_nic_byte(dev,EIFS,91 - 0x24); // EIFS: 91 (0x5B)
-		write_nic_byte(dev,CW_VAL,0xa5); //CW VALUE: 0x37
-		//DMESG("using B net params");
-	}
-#endif
-
 }
-#if 0
-void rtl8225_host_pci_init(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsOutput, 0x480);
-
-	rtl8185_rf_pins_enable(dev);
-
-	//if(priv->card_8185 == 2 && priv->enable_gpio0 ) /* version D */
-	//write_nic_word(dev, RFPinsSelect, 0x88);
-	//else
-	write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO); /* 0x488 | SW_CONTROL_GPIO */
-
-	write_nic_byte(dev, GP_ENABLE, 0);
-
-	force_pci_posting(dev);
-	mdelay(200);
-
-	write_nic_word(dev, GP_ENABLE, 0xff & (~(1<<6))); /* bit 6 is for RF on/off detection */
 
-
-}
-
-void rtl8225_host_usb_init(struct net_device *dev)
-{
-	write_nic_byte(dev,RFPinsSelect+1,0);
-
-	write_nic_byte(dev,GPIO,0);
-
-	write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7));
-
-	write_nic_byte(dev,RFPinsSelect+1,4);
-
-	write_nic_byte(dev,GPIO,0x20);
-
-	write_nic_byte(dev,GP_ENABLE,0);
-
-
-	/* Config BB & RF */
-	write_nic_word(dev, RFPinsOutput, 0x80);
-
-	write_nic_word(dev, RFPinsSelect, 0x80);
-
-	write_nic_word(dev, RFPinsEnable, 0x80);
-
-
-	mdelay(100);
-
-	mdelay(1000);
-
-}
-#endif
 void rtl8225z2_rf_init(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
@@ -840,12 +548,6 @@ void rtl8225z2_rf_init(struct net_device
 	for(i=0;i<95;i++){
 		write_rtl8225(dev, 0x1, (u8)(i+1));
 
-		#if 0
-		if(priv->phy_ver == 1)
-			/* version A */
-			write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]);
-		else
-		#endif
 		/* version B & C & D*/
 
 		write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
@@ -917,16 +619,6 @@ void rtl8225z2_rf_init(struct net_device
 
                 mdelay(1);
         }
-#if 0
-	for(i=0;i<128;i++){
-		write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
-
-		mdelay(1);
-		write_phy_ofdm(dev, 0xa, (u8)i+ 0x80);
-
-		mdelay(1);
-	}
-#endif
 
 	force_pci_posting(dev);
 	mdelay(1);
@@ -958,14 +650,6 @@ void rtl8225z2_rf_init(struct net_device
 	write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
 
 
-	#if 0
-	if(priv->card_8185 == 1){
-		if(priv->card_8185_Bversion)
-			write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/
-		else
-			write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/
-	}else{
-	#endif
 	write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
 /*ver D & 8187*/
 //	}
@@ -986,13 +670,6 @@ void rtl8225z2_rf_init(struct net_device
 
 	write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
 
-#if 0
-	}else{
-		/* Ver B & C*/
-		write_phy_ofdm(dev, 0x12, 0x0);
-		write_phy_ofdm(dev, 0x13, 0x0);
-	}
-#endif
 	write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
 	write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
 	write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
@@ -1052,11 +729,6 @@ void rtl8225z2_rf_init(struct net_device
 	write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
 	write_phy_cck(dev, 0x11, 0x88); mdelay(1);
 	write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-#if 0
-	if(priv->card_8185 == 1 && priv->card_8185_Bversion)
-		write_phy_cck(dev, 0x13, 0x98); /* Ver B */
-	else
-#endif
 	write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
 
 	write_phy_cck(dev, 0x19, 0x0);
@@ -1279,13 +951,6 @@ SetZebraRFPowerState8185(
 					QueueID++;
 					continue;
 				}
-#if 0		//reserved amy
-				else if(priv->NdisAdapter.CurrentPowerState != NdisDeviceStateD0)
-				{
-					RT_TRACE(COMP_POWER, DBG_LOUD, ("eRfSleep: %d times TcbBusyQueue[%d] !=0 but lower power state!\n", (pMgntInfo->TxPollingTimes+1), QueueID));
-					break;
-				}
-#endif
 				else//lzm mod 080826
 				{
 					priv->TxPollingTimes ++;
@@ -1388,13 +1053,6 @@ SetZebraRFPowerState8185(
 					QueueID++;
 					continue;
 				}
-#if 0
-				else if(Adapter->NdisAdapter.CurrentPowerState != NdisDeviceStateD0)
-				{
-					RT_TRACE(COMP_POWER, DBG_LOUD, ("%d times TcbBusyQueue[%d] !=0 but lower power state!\n", (i+1), QueueID));
-					break;
-				}
-#endif
 				else
 				{
 					udelay(10);
@@ -1477,39 +1135,6 @@ SetZebraRFPowerState8185(
 	{
 		// Update current RF state variable.
 		priv->eRFPowerState = eRFPowerState;
-#if 0
-		switch(priv->eRFPowerState)
-		{
-		case eRfOff:
-			//
-			//If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
-			//
-			if(priv->RfOffReason==RF_CHANGE_BY_IPS )
-			{
-				Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK);
-			}
-			else
-			{
-				// Turn off LED if RF is not ON.
-				Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
-			}
-			break;
-
-		case eRfOn:
-			// Turn on RF we are still linked, which might happen when
-			// we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
-			if( pMgntInfo->bMediaConnect == TRUE )
-			{
-				Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
-			}
-			break;
-
-		default:
-			// do nothing.
-			break;
-		}
-#endif
-
 	}
 
 	priv->SetRFPowerStateInProgress = false;
Index: b/drivers/staging/rtl8187se/r8180_rtl8255.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_rtl8255.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8255.c
@@ -256,14 +256,6 @@ void rtl8255_SetTXPowerLevel(struct net_
 	mdelay(1);
 	//write_nic_byte(dev, TX_AGC_CONTROL,4);
 }
-#if 0
-/* switch between mode B and G */
-void rtl8255_set_mode(struct net_device *dev, short modeb)
-{
-	write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40));
-	write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40));
-}
-#endif
 
 void rtl8255_rf_set_chan(struct net_device *dev, short ch)
 {
@@ -281,25 +273,6 @@ void rtl8255_rf_set_chan(struct net_devi
 
 	rtl8255_SetTXPowerLevel(dev, ch);
 	/* FIXME FIXME FIXME */
-
-	#if 0
-	write_nic_byte(dev,DIFS,0xe); //DIFS
-	write_nic_byte(dev,SLOT,0x14); //SLOT
-	write_nic_byte(dev,EIFS,0x5b); // EIFS
-	//write_nic_byte(dev,0xbc,0); //CW CONFIG
-	write_nic_byte(dev,0xbd,0xa4); //CW VALUE
-	//write_nic_byte(dev,TX_AGC_CONTROL,4);
-	//write_nic_byte(dev, 0x9d,7);
-//Apr 20 13:25:03 localhost kernel: w8. 409d<-7  // CCK AGC
-	/*write_nic_word(dev,0x84,0x488);
-	write_nic_byte(dev,0x91,0x3e);
-	write_nic_byte(dev,0x90,0x30);
-	write_nic_word(dev,0x84,0x488);
-	write_nic_byte(dev,0x91,0x3e);
-	write_nic_byte(dev,0x90,0x20);
-	*/
-	//mdelay(100);
-	#endif
 }
 
 void rtl8255_init_BGband(struct net_device *dev)
@@ -1807,11 +1780,7 @@ void rtl8255_rf_init(struct net_device *
 	write_phy_cck(dev, 0x4a, 0x0);
 	write_phy_cck(dev, 0x4b, 0x0);
 //	write_phy_cck(dev, 0x4c, 0x5);
-#if 0
-	write_phy_cck(dev, 0x41, 0x9d); /* Energy Threshold */
-	// TESTR 0xb 8187
-	write_phy_cck(dev, 0x10, 0x93);// & 0xfb);
-#endif
+
 	//rtl8255_set_gain(dev, 1); /* FIXME this '1' is random */
 
 	rtl8255_SetTXPowerLevel(dev, priv->chan);
Index: b/drivers/staging/rtl8187se/r8180_wx.c
===================================================================
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -1569,36 +1569,7 @@ static struct iw_statistics *r8180_get_w
 		wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
 		return wstats;
 	}
-#if 0
-	spin_lock_irqsave(&ieee->lock, flag);
-	list_for_each_entry(target, &ieee->network_list, list)
-	{
-		if (is_same_network(target, &ieee->current_network, ieee))
-		{
-			printk("it's same network:%s\n", target->ssid);
-#if 0
-			if (!tmp_level)
-			{
-				tmp_level = target->stats.signalstrength;
-				tmp_qual = target->stats.signal;
-			}
-			else
-			{
 
-				tmp_level = (15*tmp_level + target->stats.signalstrength)/16;
-				tmp_qual = (15*tmp_qual + target->stats.signal)/16;
-			}
-#else
-			tmp_level = target->stats.signal;
-			tmp_qual = target->stats.signalstrength;
-			tmp_noise = target->stats.noise;
-			printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
-#endif
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&ieee->lock, flag);
-#endif
 	tmp_level = (&ieee->current_network)->stats.signal;
 	tmp_qual = (&ieee->current_network)->stats.signalstrength;
 	tmp_noise = (&ieee->current_network)->stats.noise;
Index: b/drivers/staging/rtl8187se/r8185b_init.c
===================================================================
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -1194,11 +1194,6 @@ ZEBRA_Config_85BASIC_HardCode(
 	RF_WriteReg(dev, 0x05, 0x05ab);			mdelay(1); // Rx mode//+edward
 	RF_WriteReg(dev, 0x00, 0x009f);			mdelay(1); // Rx mode//+edward
 
-#if 0//-edward
-	RF_WriteReg(dev, 0x00, 0x0197);			mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x05ab);			mdelay(1);
-	RF_WriteReg(dev, 0x00, 0x009F);			mdelay(1);
-#endif
 	RF_WriteReg(dev, 0x01, 0x0000);			mdelay(1); // Rx mode//+edward
 	RF_WriteReg(dev, 0x02, 0x0000);			mdelay(1); // Rx mode//+edward
 	//power save parameters.
@@ -1218,14 +1213,7 @@ ZEBRA_Config_85BASIC_HardCode(
 		CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
 		CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
 	*/
-#if 0
-	write_nic_dword(dev, PHY_ADR, 0x0100c880);
-	write_nic_dword(dev, PHY_ADR, 0x01001c86);
-	write_nic_dword(dev, PHY_ADR, 0x01007890);
-	write_nic_dword(dev, PHY_ADR, 0x0100d0ae);
-	write_nic_dword(dev, PHY_ADR, 0x010006af);
-	write_nic_dword(dev, PHY_ADR, 0x01004681);
-#endif
+
 	write_phy_cck(dev,0x00,0xc8);
 	write_phy_cck(dev,0x06,0x1c);
 	write_phy_cck(dev,0x10,0x78);
@@ -1294,64 +1282,6 @@ ZEBRA_Config_85BASIC_HardCode(
 	// Config Sw/Hw  Combinational Antenna Diversity. Added by Roger, 2008.02.26.
 	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
 //by amy 080312}
-#if 0
-	// Config Sw/Hw  Antenna Diversity
-	if( priv->bSwAntennaDiverity )  //  Use SW+Hw Antenna Diversity
-	{
-		if( priv->bDefaultAntenna1 == true )  // aux antenna
-		{
-			// Mac register, aux antenna
-			write_nic_byte(dev, ANTSEL, 0x00);
-			// Config CCK RX antenna.
-			write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb
-			write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
-			write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7
-			// Config OFDM RX antenna.
-			write_phy_ofdm(dev, 0x0d, 0x54);   // Reg0d : 54
-			write_phy_ofdm(dev, 0x18, 0xb2);  // Reg18 : b2
-		}
-		else //  main antenna
-		{
-			// Mac register, main antenna
-			write_nic_byte(dev, ANTSEL, 0x03);
-			//base band
-			// Config CCK RX antenna.
-			write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b
-			write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
-			write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7
-			// Config OFDM RX antenna.
-			write_phy_ofdm(dev, 0x0d, 0x5c);   // Reg0d : 5c
-			write_phy_ofdm(dev, 0x18, 0xb2);  // Reg18 : b2
-		}
-	}
-	else   // Disable Antenna Diversity
-	{
-		if( priv->bDefaultAntenna1 == true ) // aux Antenna
-		{
-			// Mac register, aux antenna
-			write_nic_byte(dev, ANTSEL, 0x00);
-			// Config CCK RX antenna.
-			write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb
-			write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
-			write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47
-			// Config OFDM RX antenna.
-			write_phy_ofdm(dev, 0x0d, 0x54);   // Reg0d : 54
-			write_phy_ofdm(dev, 0x18, 0x32);  // Reg18 : 32
-		}
-		else // main Antenna
-		{
-			// Mac register, main antenna
-			write_nic_byte(dev, ANTSEL, 0x03);
-			// Config CCK RX antenna.
-			write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b
-			write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
-			write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47
-			// Config OFDM RX antenna.
-			write_phy_ofdm(dev, 0x0d, 0x5c);   // Reg0d : 5c
-			write_phy_ofdm(dev, 0x18, 0x32);  // Reg18 : 32
-		}
-	}
-#endif
 //by amy for antenna
 }
 
@@ -1378,69 +1308,6 @@ UpdateInitialGain(
 
 	switch(priv->rf_chip)
 	{
-#if 0
-	case RF_ZEBRA2:
-		// Dynamic set initial gain, by shien chang, 2006.07.14
-		switch(priv->InitialGain)
-		{
-			case 1: //m861dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 1: -82 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x2697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0x86a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfa85);	mdelay(1);
-				break;
-
-			case 2: //m862dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 2: -82 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x2697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0x86a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfb85);	mdelay(1);
-				break;
-
-			case 3: //m863dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 3: -82 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x2697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0x96a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfb85);	mdelay(1);
-				break;
-
-			case 4: //m864dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 4: -78 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x2697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xa6a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfb85);	mdelay(1);
-				break;
-
-			case 5: //m82dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 5: -74 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x3697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xa6a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfb85);	mdelay(1);
-				break;
-
-			case 6: //m78dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 6: -70 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x4697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xa6a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfb85);	mdelay(1);
-				break;
-
-			case 7: //m74dBm
-				DMESG("RTL8185B + 8225 Initial Gain State 7: -66 dBm \n");
-				write_nic_dword(dev, PhyAddr, 0x5697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xa6a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfb85);	mdelay(1);
-				break;
-
-			default:	//MP
-				DMESG("RTL8185B + 8225 Initial Gain State 1: -82 dBm (default)\n");
-				write_nic_dword(dev, PhyAddr, 0x2697);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0x86a4);	mdelay(1);
-				write_nic_dword(dev, PhyAddr, 0xfa85);	mdelay(1);
-				break;
-		}
-		break;
-#endif
 	case RF_ZEBRA4:
 		// Dynamic set initial gain, follow 87B
 		switch(priv->InitialGain)
@@ -1657,9 +1524,6 @@ HwConfigureRTL8185(
 		// <RJ_TODO_8185B> We shall set up the ARFR according to user's setting.
 		//write_nic_word(dev, ARFR, 0x0fff); // set 1M ~ 54M
 //by amy
-#if 0
-		PlatformIOWrite2Byte(dev, ARFR, 0x0fff); 	// set 1M ~ 54M
-#endif
 	        // Aadded by Roger, 2007.11.15.
 	        PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps.
 //by amy
@@ -1731,9 +1595,6 @@ MacConfig_85BASIC(
 	// Asked for by SD3 CM Lin, 2006.06.27, by rcnjko.
 	//PlatformIOWrite4Byte(dev, RFTiming, 0x00004001);
 //by amy
-#if 0
-	write_nic_dword(dev, RFTiming, 0x00004001);
-#endif
 	// power save parameter based on "87SE power save parameters 20071127.doc", as follow.
 
 	//Enable DA10 TX power saving
@@ -2118,16 +1979,6 @@ MgntDisconnectIBSS(
 	notify_wx_assoc_event(priv->ieee80211);
 
 	// Stop SW Beacon.Use hw beacon so do not need to do so.by amy
-#if 0
-	if(pMgntInfo->bEnableSwBeaconTimer)
-	{
-		// SwBeaconTimer will stop if pMgntInfo->mIbss==FALSE, see SwBeaconCallback() for details.
-// comment out by haich, 2007.10.01
-//#if DEV_BUS_TYPE==USB_INTERFACE
-		PlatformCancelTimer( Adapter, &pMgntInfo->SwBeaconTimer);
-//#endif
-	}
-#endif
 
 //		MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE );
 
@@ -2483,19 +2334,7 @@ InactivePowerSave(
 	//
 	// To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
 	//
-#if 0
-	while( index < 4 )
-	{
-		if( ( pMgntInfo->SecurityInfo.PairwiseEncAlgorithm == WEP104_Encryption ) ||
-			(pMgntInfo->SecurityInfo.PairwiseEncAlgorithm == WEP40_Encryption) )
-		{
-			if( pMgntInfo->SecurityInfo.KeyLen[index] != 0)
-			pAdapter->HalFunc.SetKeyHandler(pAdapter, index, 0, FALSE, pMgntInfo->SecurityInfo.PairwiseEncAlgorithm, TRUE, FALSE);
 
-		}
-		index++;
-	}
-#endif
 	priv->bSwRfProcessing = false;
 }
 
@@ -2782,58 +2621,6 @@ void rtl8185b_rx_enable(struct net_devic
 	//u32 rxconf;
 	/* for now we accept data, management & ctl frame*/
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-#if 0
-	rxconf=read_nic_dword(dev,RX_CONF);
-	rxconf = rxconf &~ MAC_FILTER_MASK;
-	rxconf = rxconf | (1<<ACCEPT_MNG_FRAME_SHIFT);
-	rxconf = rxconf | (1<<ACCEPT_DATA_FRAME_SHIFT);
-	rxconf = rxconf | (1<<ACCEPT_BCAST_FRAME_SHIFT);
-	rxconf = rxconf | (1<<ACCEPT_MCAST_FRAME_SHIFT);
-//	rxconf = rxconf | (1<<ACCEPT_CRCERR_FRAME_SHIFT);
-	if (dev->flags & IFF_PROMISC) DMESG ("NIC in promisc mode");
-
-	if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
-	   dev->flags & IFF_PROMISC){
-		rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
-	}else{
-		rxconf = rxconf | (1<<ACCEPT_NICMAC_FRAME_SHIFT);
-		if(priv->card_8185 == 0)
-			rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
-	}
-
-	/*if(priv->ieee80211->iw_mode == IW_MODE_MASTER){
-		rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
-		rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
-	}*/
-
-	if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){
-		rxconf = rxconf | (1<<ACCEPT_CTL_FRAME_SHIFT);
-		rxconf = rxconf | (1<<ACCEPT_ICVERR_FRAME_SHIFT);
-		rxconf = rxconf | (1<<ACCEPT_PWR_FRAME_SHIFT);
-	}
-
-	if( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		rxconf = rxconf | (1<<ACCEPT_CRCERR_FRAME_SHIFT);
-
-	//if(!priv->card_8185){
-		rxconf = rxconf &~ RX_FIFO_THRESHOLD_MASK;
-		rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE<<RX_FIFO_THRESHOLD_SHIFT);
-	//}
-
-	rxconf = rxconf | (1<<RX_AUTORESETPHY_SHIFT);
-	rxconf = rxconf &~ MAX_RX_DMA_MASK;
-	rxconf = rxconf | (MAX_RX_DMA_2048<<MAX_RX_DMA_SHIFT);
-
-	//if(!priv->card_8185)
-		rxconf = rxconf | RCR_ONLYERLPKT;
-
-	rxconf = rxconf &~ RCR_CS_MASK;
-	if(!priv->card_8185)
-		rxconf |= (priv->rcr_csense<<RCR_CS_SHIFT);
-//	rxconf &=~ 0xfff00000;
-//	rxconf |= 0x90100000;//9014f76f;
-	write_nic_dword(dev, RX_CONF, rxconf);
-#endif
 
 	if (dev->flags & IFF_PROMISC) DMESG ("NIC in promisc mode");
 
@@ -2875,76 +2662,6 @@ void rtl8185b_tx_enable(struct net_devic
 	//u32 txconf;
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
-#if 0
-	txconf= read_nic_dword(dev,TX_CONF);
-	if(priv->card_8185){
-
-
-		byte = read_nic_byte(dev,CW_CONF);
-		byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
-		byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
-		write_nic_byte(dev, CW_CONF, byte);
-
-		tx_agc_ctl = read_nic_byte(dev, TX_AGC_CTL);
-		tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
-		tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
-		tx_agc_ctl |=(1<<TX_AGC_CTL_FEEDBACK_ANT);
-		write_nic_byte(dev, TX_AGC_CTL, tx_agc_ctl);
-		/*
-		write_nic_word(dev, 0x5e, 0x01);
-		force_pci_posting(dev);
-		mdelay(1);
-		write_nic_word(dev, 0xfe, 0x10);
-		force_pci_posting(dev);
-		mdelay(1);
-		write_nic_word(dev, 0x5e, 0x00);
-		force_pci_posting(dev);
-		mdelay(1);
-		*/
-		write_nic_byte(dev, 0xec, 0x3f); /* Disable early TX */
-	}
-
-	if(priv->card_8185){
-
-		txconf = txconf &~ (1<<TCR_PROBE_NOTIMESTAMP_SHIFT);
-
-	}else{
-
-		if(hwseqnum)
-			txconf= txconf &~ (1<<TX_CONF_HEADER_AUTOICREMENT_SHIFT);
-		else
-			txconf= txconf | (1<<TX_CONF_HEADER_AUTOICREMENT_SHIFT);
-	}
-
-	txconf = txconf &~ TX_LOOPBACK_MASK;
-	txconf = txconf | (TX_LOOPBACK_NONE <<TX_LOOPBACK_SHIFT);
-	txconf = txconf &~ TCR_DPRETRY_MASK;
-	txconf = txconf &~ TCR_RTSRETRY_MASK;
-	txconf = txconf | (priv->retry_data<<TX_DPRETRY_SHIFT);
-	txconf = txconf | (priv->retry_rts<<TX_RTSRETRY_SHIFT);
-	txconf = txconf &~ (1<<TX_NOCRC_SHIFT);
-
-	if(priv->card_8185){
-		if(priv->hw_plcp_len)
-			txconf = txconf &~ TCR_PLCP_LEN;
-		else
-			txconf = txconf | TCR_PLCP_LEN;
-	}else{
-		txconf = txconf &~ TCR_SAT;
-	}
-	txconf = txconf &~ TCR_MXDMA_MASK;
-	txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
-	txconf = txconf | TCR_CWMIN;
-	txconf = txconf | TCR_DISCW;
-
-//	if(priv->ieee80211->hw_wep)
-//		txconf=txconf &~ (1<<TX_NOICV_SHIFT);
-//	else
-		txconf=txconf | (1<<TX_NOICV_SHIFT);
-
-	write_nic_dword(dev,TX_CONF,txconf);
-#endif
-
 	write_nic_dword(dev, TCR, priv->TransmitConfig);
 	byte = read_nic_byte(dev, MSR);
 	byte |= MSR_LINK_ENEDCA;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/