Re: [RESEND] [PATCH] readahead:add blk_run_backing_dev
From: Vladislav Bolkhovitin
Date: Mon Jun 29 2009 - 06:55:45 EST
Wu Fengguang, on 06/29/2009 01:34 PM wrote:
On Sat, Jun 20, 2009 at 08:29:31PM +0800, Vladislav Bolkhovitin wrote:
Wu Fengguang, on 06/20/2009 07:55 AM wrote:
On Fri, Jun 19, 2009 at 03:04:36AM +0800, Andrew Morton wrote:
On Sun, 7 Jun 2009 06:45:38 +0800
Wu Fengguang <fengguang.wu@xxxxxxxxx> wrote:
Do you have a place where the raw blktrace data can be retrieved for
more in-depth analysis?
I think your comment is really adequate. In another thread, Wu Fengguang pointed
out the same issue.
I and Wu also wait his analysis.
And do it with a large readahead size :)
Alan, this was my analysis:
: Hifumi, can you help retest with some large readahead size?
:
: Your readahead size (128K) is smaller than your max_sectors_kb (256K),
: so two readahead IO requests get merged into one real IO, that means
: half of the readahead requests are delayed.
ie. two readahead requests get merged and complete together, thus the effective
IO size is doubled but at the same time it becomes completely synchronous IO.
:
: The IO completion size goes down from 512 to 256 sectors:
:
: before patch:
: 8,0 3 177955 50.050313976 0 C R 8724991 + 512 [0]
: 8,0 3 177966 50.053380250 0 C R 8725503 + 512 [0]
: 8,0 3 177977 50.056970395 0 C R 8726015 + 512 [0]
: 8,0 3 177988 50.060326743 0 C R 8726527 + 512 [0]
: 8,0 3 177999 50.063922341 0 C R 8727039 + 512 [0]
:
: after patch:
: 8,0 3 257297 50.000760847 0 C R 9480703 + 256 [0]
: 8,0 3 257306 50.003034240 0 C R 9480959 + 256 [0]
: 8,0 3 257307 50.003076338 0 C R 9481215 + 256 [0]
: 8,0 3 257323 50.004774693 0 C R 9481471 + 256 [0]
: 8,0 3 257332 50.006865854 0 C R 9481727 + 256 [0]
I haven't sent readahead-add-blk_run_backing_dev.patch in to Linus yet
and it's looking like 2.6.32 material, if ever.
If it turns out to be wonderful, we could always ask the -stable
maintainers to put it in 2.6.x.y I guess.
Agreed. The expected (and interesting) test on a properly configured
HW RAID has not happened yet, hence the theory remains unsupported.
Hmm, do you see anything improper in the Ronald's setup (see
http://sourceforge.net/mailarchive/forum.php?thread_name=a0272b440906030714g67eabc5k8f847fb1e538cc62%40mail.gmail.com&forum_name=scst-devel)?
It is HW RAID based.
No. Ronald's HW RAID performance is reasonably good. I meant Hifumi's
RAID performance is too bad and may be improved by increasing the
readahead size, hehe.
As I already wrote, we can ask Ronald to perform any needed tests.
Thanks! Ronald's test results are:
231 MB/s HW RAID
69.6 MB/s HW RAID + SCST
89.7 MB/s HW RAID + SCST + this patch
So this patch seem to help SCST, but again it would be better to
improve the SCST throughput first - it is now quite sub-optimal.
No, SCST performance isn't an issue here. You simply can't get more than
110 MB/s from iSCSI over 1GbE, hence 231 MB/s fundamentally isn't
possible. There is only room for 20% improvement, which should be
achieved with better client-side-driven pipelining (see our other
discussions, e.g. http://lkml.org/lkml/2009/5/12/370)
(Sorry for the long delay: currently I have not got an idea on
how to measure such timing issues.)
And if Ronald could provide the HW RAID performance with this patch,
then we can confirm if this patch really makes a difference for RAID.
Thanks,
Fengguang
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/