Re: [PATCH 5/5] power_supply: add a charge_type status to the api,and use it for olpc driver

[Mark Brown]

On Tue, Jun 30, 2009 at 07:37:19PM +0400, Anton Vorontsov wrote:
> On Tue, Jun 30, 2009 at 11:04:30AM -0400, Andres Salomon wrote:

> > As far as the slow type, I don't see the need either, but I assumed
> > Anton was aware of devices that differentiated between slow and
> > trickle charging.

> Yep, there are two charging modes in Openmoko Neo FreeRunners:

> - 100 mA. It's "slow" mode -- used when the Neo couldn't negotiate
>   with USB host, so it is permitted to only draw 100 mA from VBUS.

I strongly suspect you will find that the "slow" mode there is actually
a trickle charge.  It's a lot more practical to trickle charge in mobile
phone sized systems since the batteries are so much smaller than laptop
batteries.  

> - 500/1000 mA. It's so-called "fast" mode, can be enabled after
>   successful negotiation with the USB host.

Even if the 500mA is available you'll not always be able to do a fast
charge from a USB supply - some systems draw enough current to require
that the USB supply be suppliemented from battery when they're being
heavily used.

> Well, this kind slow charging isn't official terminology, and
> I'm not sure if we should use it. But I'm fine with it since we
> can always remove "Slow" mode (i.e. report it as "Fast"), and
> userspace won't break.

I guess my main question was if it was distinguishable from trickle
charging.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/