[PATCH 20/22] Staging: rtl8192su: remove RTL8192SU ifdefs
From: Bartlomiej Zolnierkiewicz
Date: Fri Jul 03 2009 - 10:04:57 EST
From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH staging] Staging: rtl8192su: remove RTL8192SU ifdefs
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/staging/rtl8192su/Makefile | 2
drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c | 5
drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c | 4
drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c | 22
drivers/staging/rtl8192su/r8180_93cx6.h | 5
drivers/staging/rtl8192su/r8192S_Efuse.c | 2
drivers/staging/rtl8192su/r8192S_firmware.c | 434 --
drivers/staging/rtl8192su/r8192S_hw.h | 2
drivers/staging/rtl8192su/r8192S_phy.c | 95
drivers/staging/rtl8192su/r8192S_rtl6052.c | 27
drivers/staging/rtl8192su/r8192U.h | 190 -
drivers/staging/rtl8192su/r8192U_core.c | 1900 -------------
drivers/staging/rtl8192su/r8192U_dm.c | 178 -
drivers/staging/rtl8192su/r8192U_wx.c | 12
drivers/staging/rtl8192su/r819xU_cmdpkt.c | 77
15 files changed, 82 insertions(+), 2873 deletions(-)
Index: b/drivers/staging/rtl8192su/Makefile
===================================================================
--- a/drivers/staging/rtl8192su/Makefile
+++ b/drivers/staging/rtl8192su/Makefile
@@ -7,8 +7,6 @@ EXTRA_CFLAGS += -mhard-float -DCONFIG_FO
EXTRA_CFLAGS += -DJACKSON_NEW_RX
EXTRA_CFLAGS += -DTHOMAS_BEACON
-EXTRA_CFLAGS += -DRTL8192SU
-
#EXTRA_CFLAGS += -DMUTIPLE_BULK_OUT
r8192s_usb-objs := \
Index: b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
@@ -230,7 +230,6 @@ int ieee80211_wx_get_rate(struct ieee802
union iwreq_data *wrqu, char *extra)
{
u32 tmp_rate = 0;
-#ifdef RTL8192SU
//printk("===>mode:%d, halfNmode:%d\n", ieee->mode, ieee->bHalfWirelessN24GMode);
if (ieee->mode & (IEEE_A | IEEE_B | IEEE_G))
tmp_rate = ieee->rate;
@@ -243,10 +242,6 @@ int ieee80211_wx_get_rate(struct ieee802
else
tmp_rate = HTMcsToDataRate(ieee, 15);
}
-#else
- tmp_rate = TxCountToDataRate(ieee, ieee->softmac_stats.CurrentShowTxate);
-
-#endif
wrqu->bitrate.value = tmp_rate * 500000;
return 0;
Index: b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -495,11 +495,7 @@ void ieee80211_query_protectionmode(stru
{
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
-#if defined(RTL8192SU)
tcb_desc->bRTSEnable = false;
-#else
- tcb_desc->bRTSEnable = true;
-#endif
break;
}
else if(pHTInfo->IOTAction & (HT_IOT_ACT_FORCED_RTS|HT_IOT_ACT_PURE_N_MODE))
Index: b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
@@ -516,7 +516,6 @@ bool HTIOTActIsDisableMCSTwoSpatialStrea
//#endif
#endif
#if 1
-#if defined(RTL8192SU)
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
if(ieee->is_ap_in_wep_tkip && ieee->is_ap_in_wep_tkip(ieee->dev))
{
@@ -526,7 +525,6 @@ bool HTIOTActIsDisableMCSTwoSpatialStrea
retValue = true;
}
#endif
-#endif
return retValue;
}
@@ -595,7 +593,6 @@ u8 HTIOTActIsForcedRTSCTS(struct ieee802
u8 retValue = 0;
printk("============>%s(), %d\n", __FUNCTION__, network->realtek_cap_exit);
// Force protection
-#if defined(RTL8192SU)
if(ieee->pHTInfo->bCurrentHTSupport)
{
//if(!network->realtek_cap_exit)
@@ -606,7 +603,6 @@ u8 HTIOTActIsForcedRTSCTS(struct ieee802
retValue = 1;
}
}
-#endif
return retValue;
}
@@ -640,7 +636,6 @@ HTIOCActRejcectADDBARequest(struct ieee8
//if(IS_HARDWARE_TYPE_8192SE(Adapter) ||
// IS_HARDWARE_TYPE_8192SU(Adapter)
//)
-#if defined RTL8192SU
{
// Do not reject ADDBA REQ because some of the AP may
// keep on sending ADDBA REQ qhich cause DHCP fail or ping loss!
@@ -650,7 +645,6 @@ HTIOCActRejcectADDBARequest(struct ieee8
// return FALSE;
}
-#endif
return retValue;
@@ -664,7 +658,6 @@ HTIOCActRejcectADDBARequest(struct ieee8
{
u8 retValue = 0;
//if(IS_HARDWARE_TYPE_8192SU(Adapter))
-#ifdef RTL8192SU
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
{
//#if UNDER_VISTA
@@ -678,7 +671,6 @@ HTIOCActRejcectADDBARequest(struct ieee8
return 1;
}
-#endif
return retValue;
}
@@ -733,7 +725,6 @@ HTIOTActIsDisableTx40MHz(struct ieee8021
{
u8 retValue = 0;
-#if defined RTL8192SU
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
if( (KEY_TYPE_WEP104 == ieee->pairwise_key_type) ||
(KEY_TYPE_WEP40 == ieee->pairwise_key_type) ||
@@ -744,7 +735,6 @@ HTIOTActIsDisableTx40MHz(struct ieee8021
if((pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) && (network->bssht.bdSupportHT))
retValue = 1;
}
-#endif
return retValue;
}
@@ -754,7 +744,6 @@ HTIOTActIsTxNoAggregation(struct ieee802
{
u8 retValue = 0;
-#if defined RTL8192SU
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
if( (KEY_TYPE_WEP104 == ieee->pairwise_key_type) ||
(KEY_TYPE_WEP40 == ieee->pairwise_key_type) ||
@@ -766,7 +755,6 @@ HTIOTActIsTxNoAggregation(struct ieee802
pHTInfo->IOTPeer==HT_IOT_PEER_UNKNOWN)
retValue = 1;
}
-#endif
return retValue;
}
@@ -777,7 +765,6 @@ HTIOTActIsDisableTx2SS(struct ieee80211_
{
u8 retValue = 0;
-#if defined RTL8192SU
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
if( (KEY_TYPE_WEP104 == ieee->pairwise_key_type) ||
(KEY_TYPE_WEP40 == ieee->pairwise_key_type) ||
@@ -788,7 +775,6 @@ HTIOTActIsDisableTx2SS(struct ieee80211_
if((pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK) && (network->bssht.bdSupportHT))
retValue = 1;
}
-#endif
return retValue;
}
@@ -797,14 +783,12 @@ HTIOTActIsDisableTx2SS(struct ieee80211_
bool HTIOCActAllowPeerAggOnePacket(struct ieee80211_device* ieee,struct ieee80211_network *network)
{
bool retValue = false;
-#if defined(RTL8192SU)
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
{
if(pHTInfo->IOTPeer == HT_IOT_PEER_MARVELL)
return true;
}
-#endif
return retValue;
}
@@ -1783,11 +1767,9 @@ void HTResetSelfAndSavePeerSetting(struc
//if(bIOTAction)
// pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_RTS;
-#if defined(RTL8192SU)
bIOTAction = HTIOCActRejcectADDBARequest(pNetwork);
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_REJECT_ADDBA_REQ;
-#endif
bIOTAction = HTIOCActAllowPeerAggOnePacket(ieee, pNetwork);
if(bIOTAction)
@@ -1797,7 +1779,6 @@ void HTResetSelfAndSavePeerSetting(struc
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_EDCA_BIAS_ON_RX;
-#if defined(RTL8192SU)
bIOTAction = HTIOTActDisableShortGI(ieee, pNetwork);
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_SHORT_GI;
@@ -1805,13 +1786,11 @@ void HTResetSelfAndSavePeerSetting(struc
bIOTAction = HTIOTActDisableHighPower(ieee, pNetwork);
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_HIGH_POWER;
-#endif
bIOTAction = HTIOTActIsForcedAMSDU8K(ieee, pNetwork);
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_TX_USE_AMSDU_8K;
-#if defined(RTL8192SU)
bIOTAction = HTIOTActIsTxNoAggregation(ieee, pNetwork);
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_TX_NO_AGGREGATION;
@@ -1823,7 +1802,6 @@ void HTResetSelfAndSavePeerSetting(struc
bIOTAction = HTIOTActIsDisableTx2SS(ieee, pNetwork);
if(bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_TX_2SS;
-#endif
//must after HT_IOT_ACT_TX_NO_AGGREGATION
bIOTAction = HTIOTActIsForcedRTSCTS(ieee, pNetwork);
if(bIOTAction)
Index: b/drivers/staging/rtl8192su/r8180_93cx6.h
===================================================================
--- a/drivers/staging/rtl8192su/r8180_93cx6.h
+++ b/drivers/staging/rtl8192su/r8180_93cx6.h
@@ -13,13 +13,8 @@
/*This files contains card eeprom (93c46 or 93c56) programming routines*/
/*memory is addressed by WORDS*/
-#ifdef RTL8192SU
#include "r8192U.h"
#include "r8192S_hw.h"
-#else
-#include "r8192U.h"
-#include "r8192U_hw.h"
-#endif
#define EPROM_DELAY 10
Index: b/drivers/staging/rtl8192su/r8192S_Efuse.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_Efuse.c
+++ b/drivers/staging/rtl8192su/r8192S_Efuse.c
@@ -35,7 +35,6 @@
//
// In the future, we will always support EFUSE!!
//
-#ifdef RTL8192SU
/*---------------------------Define Local Constant---------------------------*/
#define _POWERON_DELAY_
#define _PRE_EXECUTE_READ_CMD_
@@ -2401,7 +2400,6 @@ void efuset_test_func_write(struct net_d
-#endif // #if (HAL_CODE_BASE == RTL8192_S)
Index: b/drivers/staging/rtl8192su/r8192S_firmware.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_firmware.c
+++ b/drivers/staging/rtl8192su/r8192S_firmware.c
@@ -11,19 +11,13 @@
* NDIS_STATUS_FAILURE - the following initialization process should be terminated
* NDIS_STATUS_SUCCESS - if firmware initialization process success
**************************************************************************************************/
-#if defined(RTL8192SU)
#include "r8192U.h"
#include "r8192S_firmware.h"
#include <linux/unistd.h>
-#ifdef RTL8192SU
#include "r8192S_hw.h"
#include "r8192SU_HWImg.h"
//#include "r8192S_FwImgDTM.h"
-#else
-//#include "r8192U_hw.h"
-#include "r8192xU_firmware_img.h"
-#endif
#include <linux/firmware.h>
@@ -342,11 +336,9 @@ u8 FirmwareHeaderMapRfType(struct net_de
void FirmwareHeaderPriveUpdate(struct net_device *dev, PRT_8192S_FIRMWARE_PRIV pFwPriv)
{
struct r8192_priv *priv = ieee80211_priv(dev);
-#ifdef RTL8192SU
// Update USB endpoint number for RQPN settings.
pFwPriv->usb_ep_num = priv->EEPROMUsbEndPointNumber; // endpoint number: 4, 6 and 11.
RT_TRACE(COMP_INIT, "FirmwarePriveUpdate(): usb_ep_num(%#x)\n", pFwPriv->usb_ep_num);
-#endif
// Update RF types for RATR settings.
pFwPriv->rf_config = FirmwareHeaderMapRfType(dev);
@@ -551,430 +543,4 @@ bool FirmwareDownload92S(struct net_devi
rtStatus = false;
return rtStatus;
}
-#else
-void firmware_init_param(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- rt_firmware *pfirmware = priv->pFirmware;
-
- pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
-}
-
-/*
- * segment the img and use the ptr and length to remember info on each segment
- *
- */
-bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- bool rt_status = true;
- //u16 frag_threshold;
- u16 frag_length, frag_offset = 0;
- //u16 total_size;
- int i;
-
- //rt_firmware *pfirmware = priv->pFirmware;
- struct sk_buff *skb;
- unsigned char *seg_ptr;
- cb_desc *tcb_desc;
- u8 bLastIniPkt;
-
-#ifndef RTL8192SU
- if(buffer_len >= 64000-USB_HWDESC_HEADER_LEN)
- {
- return rt_status;
- }
- firmware_init_param(dev);
- //Fragmentation might be required
- frag_threshold = pfirmware->cmdpacket_frag_thresold;
-#endif
-
- do {
-#ifndef RTL8192SU
- if((buffer_len - frag_offset) > frag_threshold) {
- frag_length = frag_threshold ;
- bLastIniPkt = 0;
-
- } else
-#endif
- {
- frag_length = buffer_len - frag_offset;
- bLastIniPkt = 1;
-
- }
-
- /* Allocate skb buffer to contain firmware info and tx descriptor info
- * add 4 to avoid packet appending overflow.
- * */
- #ifdef RTL8192U
- skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
- #else
- skb = dev_alloc_skb(frag_length + 4);
- #endif
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
- tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
- tcb_desc->queue_index = TXCMD_QUEUE;
- tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
- tcb_desc->bLastIniPkt = bLastIniPkt;
-
- #ifdef RTL8192U
- skb_reserve(skb, USB_HWDESC_HEADER_LEN);
- #endif
- seg_ptr = skb->data;
- /*
- * Transform from little endian to big endian
- * and pending zero
- */
- for(i=0 ; i < frag_length; i+=4) {
- *seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
- *seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
- *seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
- *seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
- }
- tcb_desc->txbuf_size= (u16)i;
- skb_put(skb, i);
-
- if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
- (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
- (priv->ieee80211->queue_stop) ) {
- RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
- skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
- } else {
- priv->ieee80211->softmac_hard_start_xmit(skb,dev);
- }
-
- code_virtual_address += frag_length;
- frag_offset += frag_length;
-
- }while(frag_offset < buffer_len);
-
- return rt_status;
-
-#if 0
-cmdsend_downloadcode_fail:
- rt_status = false;
- RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n");
- return rt_status;
-#endif
-}
-
-bool
-fwSendNullPacket(
- struct net_device *dev,
- u32 Length
-)
-{
- bool rtStatus = true;
- struct r8192_priv *priv = ieee80211_priv(dev);
- struct sk_buff *skb;
- cb_desc *tcb_desc;
- unsigned char *ptr_buf;
- bool bLastInitPacket = false;
-
- //PlatformAcquireSpinLock(dev, RT_TX_SPINLOCK);
-
- //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
- skb = dev_alloc_skb(Length+ 4);
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
- tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
- tcb_desc->queue_index = TXCMD_QUEUE;
- tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
- tcb_desc->bLastIniPkt = bLastInitPacket;
- ptr_buf = skb_put(skb, Length);
- memset(ptr_buf,0,Length);
- tcb_desc->txbuf_size= (u16)Length;
-
- if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
- (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
- (priv->ieee80211->queue_stop) ) {
- RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
- skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
- } else {
- priv->ieee80211->softmac_hard_start_xmit(skb,dev);
- }
-
- //PlatformReleaseSpinLock(dev, RT_TX_SPINLOCK);
- return rtStatus;
-}
-
-//-----------------------------------------------------------------------------
-// Procedure: Check whether main code is download OK. If OK, turn on CPU
-//
-// Description: CPU register locates in different page against general register.
-// Switch to CPU register in the begin and switch back before return
-//
-//
-// Arguments: The pointer of the dev
-//
-// Returns:
-// NDIS_STATUS_FAILURE - the following initialization process should be terminated
-// NDIS_STATUS_SUCCESS - if firmware initialization process success
-//-----------------------------------------------------------------------------
-bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
-{
- bool rt_status = true;
- int check_putcodeOK_time = 200000, check_bootOk_time = 200000;
- u32 CPU_status = 0;
-
- /* Check whether put code OK */
- do {
- CPU_status = read_nic_dword(dev, CPU_GEN);
-
- if(CPU_status&CPU_GEN_PUT_CODE_OK)
- break;
-
- }while(check_putcodeOK_time--);
-
- if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
- RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
- goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
- } else {
- RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
- }
-
- /* Turn On CPU */
- CPU_status = read_nic_dword(dev, CPU_GEN);
- write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff));
- mdelay(1000);
-
- /* Check whether CPU boot OK */
- do {
- CPU_status = read_nic_dword(dev, CPU_GEN);
-
- if(CPU_status&CPU_GEN_BOOT_RDY)
- break;
- }while(check_bootOk_time--);
-
- if(!(CPU_status&CPU_GEN_BOOT_RDY)) {
- goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
- } else {
- RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
- }
-
- return rt_status;
-
-CPUCheckMainCodeOKAndTurnOnCPU_Fail:
- RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
- rt_status = FALSE;
- return rt_status;
-}
-
-bool CPUcheck_firmware_ready(struct net_device *dev)
-{
-
- bool rt_status = true;
- int check_time = 200000;
- u32 CPU_status = 0;
-
- /* Check Firmware Ready */
- do {
- CPU_status = read_nic_dword(dev, CPU_GEN);
-
- if(CPU_status&CPU_GEN_FIRM_RDY)
- break;
-
- }while(check_time--);
-
- if(!(CPU_status&CPU_GEN_FIRM_RDY))
- goto CPUCheckFirmwareReady_Fail;
- else
- RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
-
- return rt_status;
-
-CPUCheckFirmwareReady_Fail:
- RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
- rt_status = false;
- return rt_status;
-
-}
-
-bool init_firmware(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- bool rt_status = TRUE;
-
- u8 *firmware_img_buf[3] = { &rtl8190_fwboot_array[0],
- &rtl8190_fwmain_array[0],
- &rtl8190_fwdata_array[0]};
-
- u32 firmware_img_len[3] = { sizeof(rtl8190_fwboot_array),
- sizeof(rtl8190_fwmain_array),
- sizeof(rtl8190_fwdata_array)};
- u32 file_length = 0;
- u8 *mapped_file = NULL;
- u32 init_step = 0;
- opt_rst_type_e rst_opt = OPT_SYSTEM_RESET;
- firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT;
-
- rt_firmware *pfirmware = priv->pFirmware;
- const struct firmware *fw_entry;
- const char *fw_name[3] = { "RTL8192U/boot.img",
- "RTL8192U/main.img",
- "RTL8192U/data.img"};
- int rc;
-
- RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
-
- if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
- /* it is called by reset */
- rst_opt = OPT_SYSTEM_RESET;
- starting_state = FW_INIT_STEP0_BOOT;
- // TODO: system reset
-
- }else if(pfirmware->firmware_status == FW_STATUS_5_READY) {
- /* it is called by Initialize */
- rst_opt = OPT_FIRMWARE_RESET;
- starting_state = FW_INIT_STEP2_DATA;
- }else {
- RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
- }
-
- /*
- * Download boot, main, and data image for System reset.
- * Download data image for firmware reseta
- */
- priv->firmware_source = FW_SOURCE_IMG_FILE;
-
- for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
- /*
- * Open Image file, and map file to contineous memory if open file success.
- * or read image file from array. Default load from IMG file
- */
- if(rst_opt == OPT_SYSTEM_RESET) {
- switch(priv->firmware_source) {
- case FW_SOURCE_IMG_FILE:
- rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
- if(rc < 0 ) {
- RT_TRACE(COMP_ERR, "request firmware fail!\n");
- goto download_firmware_fail;
- }
-
- if(fw_entry->size > sizeof(pfirmware->firmware_buf)) {
- RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
- goto download_firmware_fail;
- }
-
- if(init_step != FW_INIT_STEP1_MAIN) {
- memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
- mapped_file = pfirmware->firmware_buf;
- file_length = fw_entry->size;
- } else {
- #ifdef RTL8190P
- memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
- mapped_file = pfirmware->firmware_buf;
- file_length = fw_entry->size;
- #else
- memset(pfirmware->firmware_buf,0,128);
- memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
- mapped_file = pfirmware->firmware_buf;
- file_length = fw_entry->size + 128;
- #endif
- }
- pfirmware->firmware_buf_size = file_length;
- break;
-
- case FW_SOURCE_HEADER_FILE:
- mapped_file = firmware_img_buf[init_step];
- file_length = firmware_img_len[init_step];
- if(init_step == FW_INIT_STEP2_DATA) {
- memcpy(pfirmware->firmware_buf, mapped_file, file_length);
- pfirmware->firmware_buf_size = file_length;
- }
- break;
-
- default:
- break;
- }
-
-
- }else if(rst_opt == OPT_FIRMWARE_RESET ) {
- /* we only need to download data.img here */
- mapped_file = pfirmware->firmware_buf;
- file_length = pfirmware->firmware_buf_size;
- }
-
- /* Download image file */
- /* The firmware download process is just as following,
- * 1. that is each packet will be segmented and inserted to the wait queue.
- * 2. each packet segment will be put in the skb_buff packet.
- * 3. each skb_buff packet data content will already include the firmware info
- * and Tx descriptor info
- * */
- rt_status = fw_download_code(dev,mapped_file,file_length);
-
- if(rst_opt == OPT_SYSTEM_RESET) {
- release_firmware(fw_entry);
- }
-
- if(rt_status != TRUE) {
- goto download_firmware_fail;
- }
-
- switch(init_step) {
- case FW_INIT_STEP0_BOOT:
- /* Download boot
- * initialize command descriptor.
- * will set polling bit when firmware code is also configured
- */
- pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
-#ifdef RTL8190P
- // To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet
- rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
- if(rt_status != true)
- {
- RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
- goto download_firmware_fail;
- }
-#endif
- //mdelay(1000);
- /*
- * To initialize IMEM, CPU move code from 0x80000080,
- * hence, we send 0x80 byte packet
- */
- break;
-
- case FW_INIT_STEP1_MAIN:
- /* Download firmware code. Wait until Boot Ready and Turn on CPU */
- pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
-
- /* Check Put Code OK and Turn On CPU */
- rt_status = CPUcheck_maincodeok_turnonCPU(dev);
- if(rt_status != TRUE) {
- RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
- goto download_firmware_fail;
- }
-
- pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
- break;
-
- case FW_INIT_STEP2_DATA:
- /* download initial data code */
- pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
- mdelay(1);
-
- rt_status = CPUcheck_firmware_ready(dev);
- if(rt_status != TRUE) {
- RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
- goto download_firmware_fail;
- }
-
- /* wait until data code is initialized ready.*/
- pfirmware->firmware_status = FW_STATUS_5_READY;
- break;
- }
- }
-
- RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
- //assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n"));
-
- return rt_status;
-
-download_firmware_fail:
- RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
- rt_status = FALSE;
- return rt_status;
-
-}
-#endif
Index: b/drivers/staging/rtl8192su/r8192S_hw.h
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_hw.h
+++ b/drivers/staging/rtl8192su/r8192S_hw.h
@@ -49,10 +49,8 @@ typedef enum _RT_RF_TYPE_DEFINITION
RF_1T2R = 0,
RF_2T4R,
RF_2T2R,
-#ifdef RTL8192SU
RF_1T1R,
RF_2T2R_GREEN,
-#endif
//RF_3T3R,
//RF_3T4R,
//RF_4T4R,
Index: b/drivers/staging/rtl8192su/r8192S_phy.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -35,17 +35,11 @@
#include "r8192U_dm.h"
#include "r8192S_rtl6052.h"
-#ifdef RTL8192SU
#include "r8192S_hw.h"
#include "r8192S_phy.h"
#include "r8192S_phyreg.h"
#include "r8192SU_HWImg.h"
//#include "r8192S_FwImgDTM.h"
-#else
-#include "r8192U_hw.h"
-#include "r819xU_phy.h"
-#include "r819xU_phyreg.h"
-#endif
#include "ieee80211/dot11d.h"
@@ -58,26 +52,6 @@
/*------------------------Define local variable------------------------------*/
// 2004-05-11
-#ifndef RTL8192SU
-static u32 RF_CHANNEL_TABLE_ZEBRA[]={
- 0,
- 0x085c,//2412 1
- 0x08dc,//2417 2
- 0x095c,//2422 3
- 0x09dc,//2427 4
- 0x0a5c,//2432 5
- 0x0adc,//2437 6
- 0x0b5c,//2442 7
- 0x0bdc,//2447 8
- 0x0c5c,//2452 9
- 0x0cdc,//2457 10
- 0x0d5c,//2462 11
- 0x0ddc,//2467 12
- 0x0e5c,//2472 13
- //0x0f5c,//2484
- 0x0f72,//2484 //20040810
-};
-#endif
static u32
phy_CalculateBitShift(u32 BitMask);
@@ -114,7 +88,6 @@ static u8 phy_DbmToTxPwrIdx( struct net_
void phy_SetFwCmdIOCallback(struct net_device* dev);
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
-#ifdef RTL8192SU
//
// Description:
// Base Band read by 4181 to make sure that operation could be done in unlimited cycle.
@@ -382,7 +355,6 @@ void phy_SetUsbRFReg(struct net_device*
}
-#endif
/*---------------------Define local function prototype-----------------------*/
@@ -422,7 +394,6 @@ u32 rtl8192_QueryBBReg(struct net_device
// 2008.09.06.
//
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
-#ifdef RTL8192SU
if(IS_BB_REG_OFFSET_92S(RegAddr))
{
//if(RT_USB_CANNOT_IO(Adapter)) return FALSE;
@@ -436,7 +407,6 @@ u32 rtl8192_QueryBBReg(struct net_device
OriginalValue = phy_QueryUsbBBReg(dev, RegAddr);
}
else
-#endif
{
OriginalValue = read_nic_dword(dev, RegAddr);
}
@@ -482,7 +452,6 @@ void rtl8192_setBBreg(struct net_device*
// 2008.09.06.
//
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
-#ifdef RTL8192SU
if(IS_BB_REG_OFFSET_92S(RegAddr))
{
if((RegAddr & 0x03) != 0)
@@ -501,7 +470,6 @@ void rtl8192_setBBreg(struct net_device*
phy_SetUsbBBReg(dev, RegAddr, Data);
}
else
-#endif
{
if(BitMask!= bMaskDWord)
{//if not "double word" write
@@ -571,19 +539,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_de
// 2008.09.06.
//
//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
-#ifdef RTL8192SU
//if(RT_USB_CANNOT_IO(Adapter)) return FALSE;
Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr);
-#else
- if (priv->Rf_Mode == RF_OP_By_FW)
- {
- Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
- }
- else
- {
- Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr);
- }
-#endif
BitShift = phy_CalculateBitShift(BitMask);
Readback_Value = (Original_Value & BitMask) >> BitShift;
@@ -647,7 +604,6 @@ void rtl8192_phy_SetRFReg(struct net_dev
// 2008.09.06.
//
//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
-#ifdef RTL8192SU
//if(RT_USB_CANNOT_IO(Adapter)) return;
if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
@@ -659,37 +615,6 @@ void rtl8192_phy_SetRFReg(struct net_dev
}
else
phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data);
-#else
- if (priv->Rf_Mode == RF_OP_By_FW)
- {
- //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data);
- if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
- {
- Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
- BitShift = phy_CalculateBitShift(BitMask);
- New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
-
- phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value);
- }
- else
- phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data);
- }
- else
- {
- //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data);
- if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
- {
- Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr);
- BitShift = phy_CalculateBitShift(BitMask);
- New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
-
- phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value);
- }
- else
- phy_RFSerialWrite(dev, eRFPath, RegAddr, Data);
-
- }
-#endif
//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
//spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113
up(&priv->rf_sem);
@@ -1477,11 +1402,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(st
if(Rtl819XRadioA_Array_Table[i] == 0xfe)
{ // Deay specific ms. Only RF configuration require delay.
//#if (DEV_BUS_TYPE == USB_INTERFACE)
-#ifdef RTL8192SU
mdelay(1000);
-#else
- mdelay(50);
-#endif
}
else if (Rtl819XRadioA_Array_Table[i] == 0xfd)
mdelay(5);
@@ -1505,11 +1426,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(st
if(Rtl819XRadioB_Array_Table[i] == 0xfe)
{ // Deay specific ms. Only RF configuration require delay.
//#if (DEV_BUS_TYPE == USB_INTERFACE)
-#ifdef RTL8192SU
mdelay(1000);
-#else
- mdelay(50);
-#endif
}
else if (Rtl819XRadioB_Array_Table[i] == 0xfd)
mdelay(5);
@@ -2969,9 +2886,7 @@ void rtl8192_SetBWMode(struct net_device
#endif
if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) )
{
-#if defined(RTL8192SU)
SetBWModeCallback8192SUsbWorkItem(dev);
-#endif
}
else
{
@@ -3086,9 +3001,7 @@ u8 rtl8192_phy_SwChnl(struct net_device*
if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower))
{
-#if defined(RTL8192SU)
SwChnlCallback8192SUsbWorkItem(dev);
-#endif
#ifdef TO_DO_LIST
if(bResult)
{
@@ -3339,13 +3252,9 @@ phy_SwChnlStepByStep(
case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!!
for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
{
-#if defined RTL8192SU
// For new T65 RF 0222d register 0x18 bit 0-9 = channel number.
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2));
//printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f));
-#else
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, ((CurrentCmd->Para2)<<7));
-#endif
}
break;
default:
@@ -3813,7 +3722,6 @@ extern void PHY_IQCalibrateBcut(struct n
//
//-------------------------Move to other DIR later----------------------------*/
//#if (DEV_BUS_TYPE == USB_INTERFACE)
-#ifdef RTL8192SU
// use in phy only (in win it's timer)
void SwChnlCallback8192SUsb(struct net_device *dev)
@@ -4190,7 +4098,6 @@ void SetBWModeCallback8192SUsbWorkItem(s
}
//--------------------------Move to oter DIR later-------------------------------*/
-#ifdef RTL8192SU
void InitialGain8192S(struct net_device *dev, u8 Operation)
{
#ifdef TO_DO_LIST
@@ -4198,7 +4105,6 @@ void InitialGain8192S(struct net_device
#endif
}
-#endif
void InitialGain819xUsb(struct net_device *dev, u8 Operation)
{
@@ -4284,7 +4190,6 @@ extern void InitialGainOperateWorkItemCa
}
}
-#endif // #if (DEV_BUS_TYPE == USB_INTERFACE)
//-----------------------------------------------------------------------------
// Description:
Index: b/drivers/staging/rtl8192su/r8192S_rtl6052.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_rtl6052.c
+++ b/drivers/staging/rtl8192su/r8192S_rtl6052.c
@@ -23,15 +23,9 @@
#include "r8192U.h"
#include "r8192S_rtl6052.h"
-#ifdef RTL8192SU
#include "r8192S_hw.h"
#include "r8192S_phyreg.h"
#include "r8192S_phy.h"
-#else
-#include "r8192U_hw.h"
-#include "r819xU_phyreg.h"
-#include "r819xU_phy.h"
-#endif
/*---------------------------Define Local Constant---------------------------*/
@@ -162,7 +156,6 @@ void PHY_RF6052SetBandwidth(struct net_d
//if (priv->card_8192 == NIC_8192SE)
-#ifdef RTL8192SU //YJ,test,090113
{
switch(Bandwidth)
{
@@ -184,26 +177,6 @@ void PHY_RF6052SetBandwidth(struct net_d
}
}
// else
-#else
- {
- for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
- {
- switch(Bandwidth)
- {
- case HT_CHANNEL_WIDTH_20:
- //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x01);
- break;
- case HT_CHANNEL_WIDTH_20_40:
- //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, RF_CHNLBW, (BIT10|BIT11), 0x00);
- break;
- default:
- RT_TRACE(COMP_DBG, "PHY_SetRF8225Bandwidth(): unknown Bandwidth: %#X\n",Bandwidth );
- break;
-
- }
- }
- }
-#endif
}
Index: b/drivers/staging/rtl8192su/r8192U.h
===================================================================
--- a/drivers/staging/rtl8192su/r8192U.h
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -42,11 +42,7 @@
#include "ieee80211/ieee80211.h"
-#ifdef RTL8192SU
#include "r8192S_firmware.h"
-#else
-#include "r819xU_firmware.h"
-#endif
//#define RTL8192U
#define RTL819xU_MODULE_NAME "rtl819xU"
@@ -305,7 +301,6 @@ do { if(rt_global_debug_component & comp
#define OFDM_Table_Length 19
#define CCK_Table_length 12
-#ifdef RTL8192SU
//
//Tx Descriptor for RLT8192SU(Normal mode)
//
@@ -423,51 +418,9 @@ typedef struct _tx_status_desc_8192s_usb
u8 RxAGC3;
u8 RxAGC4;
}tx_status_desc_8192s_usb, *ptx_status_desc_8192s_usb;
-#else
-/* for rtl819x */
-typedef struct _tx_desc_819x_usb {
- //DWORD 0
- u16 PktSize;
- u8 Offset;
- u8 Reserved0:3;
- u8 CmdInit:1;
- u8 LastSeg:1;
- u8 FirstSeg:1;
- u8 LINIP:1;
- u8 OWN:1;
-
- //DWORD 1
- u8 TxFWInfoSize;
- u8 RATid:3;
- u8 DISFB:1;
- u8 USERATE:1;
- u8 MOREFRAG:1;
- u8 NoEnc:1;
- u8 PIFS:1;
- u8 QueueSelect:5;
- u8 NoACM:1;
- u8 Reserved1:2;
- u8 SecCAMID:5;
- u8 SecDescAssign:1;
- u8 SecType:2;
-
- //DWORD 2
- u16 TxBufferSize;
- //u16 Reserved2;
- u8 ResvForPaddingLen:7;
- u8 Reserved3:1;
- u8 Reserved4;
-
- //DWORD 3, 4, 5
- u32 Reserved5;
- u32 Reserved6;
- u32 Reserved7;
-}tx_desc_819x_usb, *ptx_desc_819x_usb;
-#endif
-#ifdef RTL8192SU
//
//Tx Descriptor for RLT8192SU(Load FW mode)
//
@@ -532,39 +485,7 @@ typedef struct _tx_h2c_cmd_hdr_8192s_usb
// DWORD 1
u32 Rsvd0;
}tx_h2c_cmd_hdr_8192s_usb, *ptx_h2c_cmd_hdr_8192s_usb;
-#else
-typedef struct _tx_desc_cmd_819x_usb {
- //DWORD 0
- u16 Reserved0;
- u8 Reserved1;
- u8 Reserved2:3;
- u8 CmdInit:1;
- u8 LastSeg:1;
- u8 FirstSeg:1;
- u8 LINIP:1;
- u8 OWN:1;
-
- //DOWRD 1
- //u32 Reserved3;
- u8 TxFWInfoSize;
- u8 Reserved3;
- u8 QueueSelect;
- u8 Reserved4;
-
- //DOWRD 2
- u16 TxBufferSize;
- u16 Reserved5;
-
- //DWORD 3,4,5
- //u32 TxBufferAddr;
- //u32 NextDescAddress;
- u32 Reserved6;
- u32 Reserved7;
- u32 Reserved8;
-}tx_desc_cmd_819x_usb, *ptx_desc_cmd_819x_usb;
-#endif
-#ifdef RTL8192SU
typedef struct _tx_fwinfo_819x_usb{
//DWORD 0
u8 TxRate:7;
@@ -593,38 +514,6 @@ typedef struct _tx_fwinfo_819x_usb{
u32 Tx_INFO_RSVD:6;
u32 PacketID:13;
}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
-#else
-typedef struct _tx_fwinfo_819x_usb {
- //DOWRD 0
- u8 TxRate:7;
- u8 CtsEnable:1;
- u8 RtsRate:7;
- u8 RtsEnable:1;
- u8 TxHT:1;
- u8 Short:1; //Short PLCP for CCK, or short GI for 11n MCS
- u8 TxBandwidth:1; // This is used for HT MCS rate only.
- u8 TxSubCarrier:2; // This is used for legacy OFDM rate only.
- u8 STBC:2;
- u8 AllowAggregation:1;
- u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate
- u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS
- u8 RtsBandwidth:1; // This is used for HT MCS rate only.
- u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only.
- u8 RtsSTBC:2;
- u8 EnableCPUDur:1; //Enable firmware to recalculate and assign packet duration
-
- //DWORD 1
- u32 RxMF:2;
- u32 RxAMD:3;
- u32 TxPerPktInfoFeedback:1;//1 indicate Tx info gathtered by firmware and returned by Rx Cmd
- u32 Reserved1:2;
- u32 TxAGCOffSet:4;
- u32 TxAGCSign:1;
- u32 Tx_INFO_RSVD:6;
- u32 PacketID:13;
- //u32 Reserved;
-}tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
-#endif
typedef struct rtl8192_rx_info {
struct urb *urb;
@@ -632,7 +521,6 @@ typedef struct rtl8192_rx_info {
u8 out_pipe;
}rtl8192_rx_info ;
-#ifdef RTL8192SU
//typedef struct _RX_DESC_STATUS_8192SU{
typedef struct rx_desc_819x_usb{
//DWORD 0
@@ -695,36 +583,8 @@ typedef struct rx_desc_819x_usb{
u32 TSFL;
//}RX_DESC_STATUS_8192SU, *PRX_DESC_STATUS_8192SU;
}rx_desc_819x_usb, *prx_desc_819x_usb;
-#else
-typedef struct rx_desc_819x_usb{
- //DOWRD 0
- u16 Length:14;
- u16 CRC32:1;
- u16 ICV:1;
- u8 RxDrvInfoSize;
- u8 Shift:2;
- u8 PHYStatus:1;
- u8 SWDec:1;
- //u8 LastSeg:1;
- //u8 FirstSeg:1;
- //u8 EOR:1;
- //u8 OWN:1;
- u8 Reserved1:4;
-
- //DWORD 1
- u32 Reserved2;
-
- //DWORD 2
- //u32 Reserved3;
-
- //DWORD 3
- //u32 BufferAddress;
-
-}rx_desc_819x_usb, *prx_desc_819x_usb;
-#endif
-#ifdef RTL8192SU
//
// Driver info are written to the begining of the RxBuffer
//
@@ -800,41 +660,11 @@ typedef struct rx_drvinfo_819x_usb{
u8 reserve:4;
}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
-#else
-typedef struct rx_drvinfo_819x_usb{
- //DWORD 0
- u16 Reserved1:12;
- u16 PartAggr:1;
- u16 FirstAGGR:1;
- u16 Reserved2:2;
-
- u8 RxRate:7;
- u8 RxHT:1;
-
- u8 BW:1;
- u8 SPLCP:1;
- u8 Reserved3:2;
- u8 PAM:1;
- u8 Mcast:1;
- u8 Bcast:1;
- u8 Reserved4:1;
-
- //DWORD 1
- u32 TSFL;
-
-}rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
-#endif
#define HWSET_MAX_SIZE_92S 128
-#ifdef RTL8192SU
#define MAX_802_11_HEADER_LENGTH 40
#define MAX_PKT_AGG_NUM 256
#define TX_PACKET_SHIFT_BYTES USB_HWDESC_HEADER_LEN
-#else
- #define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE)
- #define MAX_PKT_AGG_NUM 64
- #define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
-#endif
#define MAX_DEV_ADDR_SIZE 8 /* support till 64 bit bus width OS */
#define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/
@@ -908,7 +738,6 @@ typedef struct _rt_firmare_seg_container
u8 *seg_ptr;
}fw_seg_container, *pfw_seg_container;
-#ifdef RTL8192SU
//--------------------------------------------------------------------------------
// 8192S Firmware related
//--------------------------------------------------------------------------------
@@ -1006,16 +835,6 @@ typedef struct _rt_firmware{
//u16 firmware_buf_size;//in 92u temp FIXLZM
}rt_firmware, *prt_firmware;
-#else
-typedef struct _rt_firmware{
- firmware_status_e firmware_status;
- u16 cmdpacket_frag_thresold;
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k
-#define MAX_FW_INIT_STEP 3
- u8 firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
- u16 firmware_buf_size[MAX_FW_INIT_STEP];
-}rt_firmware, *prt_firmware;
-#endif
typedef struct _rt_firmware_info_819xUsb{
u8 sz_info[16];
}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
@@ -1659,11 +1478,7 @@ typedef struct r8192_priv
/*PHY related*/
BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D
// Read/write are allow for following hardware information variables
-#ifdef RTL8192SU
u32 MCSTxPowerLevelOriginalOffset[7];//FIXLZM
-#else
- u32 MCSTxPowerLevelOriginalOffset[6];
-#endif
u32 CCKTxPowerLevelOriginalOffset;
u8 TxPowerLevelCCK[14]; // CCK channel 1~14
u8 TxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14
@@ -1945,14 +1760,9 @@ struct ssid_thread {
};
#endif
-#ifdef RTL8192SU
short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
bool FirmwareDownload92S(struct net_device *dev);
-#else
-short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
-bool init_firmware(struct net_device *dev);
-#endif
short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
Index: b/drivers/staging/rtl8192su/r8192U_core.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -58,7 +58,6 @@ double __extendsfdf2(float a) {return a;
#define CONFIG_RTL8192_IO_MAP
-#ifdef RTL8192SU
#include <asm/uaccess.h>
#include "r8192U.h"
//#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
@@ -80,29 +79,8 @@ double __extendsfdf2(float a) {return a;
#include "ieee80211/dot11d.h"
-#else
-
-#include <asm/uaccess.h>
-#include "r8192U_hw.h"
-#include "r8192U.h"
-#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
-#include "r8180_93cx6.h" /* Card EEPROM */
-#include "r8192U_wx.h"
-#include "r819xU_phy.h" //added by WB 4.30.2008
-#include "r819xU_phyreg.h"
-#include "r819xU_cmdpkt.h"
-#include "r8192U_dm.h"
-//#include "r8192xU_phyreg.h"
-#include <linux/usb.h>
-
-#include "r8192U_pm.h"
-
-#include "ieee80211/dot11d.h"
-
-#endif
-#ifdef RTL8192SU
u32 rt_global_debug_component = \
// COMP_TRACE |
// COMP_DBG |
@@ -136,29 +114,6 @@ u32 rt_global_debug_component = \
COMP_DOWN |
COMP_RESET |
COMP_ERR; //always open err flags on
-#else
-//set here to open your trace code. //WB
-u32 rt_global_debug_component = \
- // COMP_INIT |
-// COMP_DBG |
- // COMP_EPROM |
-// COMP_PHY |
- // COMP_RF |
-// COMP_FIRMWARE |
-// COMP_CH |
- // COMP_POWER_TRACKING |
-// COMP_RATE |
- // COMP_TXAGC |
- // COMP_TRACE |
- COMP_DOWN |
- // COMP_RECV |
- // COMP_SWBW |
- COMP_SEC |
- // COMP_RESET |
- // COMP_SEND |
- // COMP_EVENTS |
- COMP_ERR ; //always open err flags on
-#endif
#define TOTAL_CAM_ENTRY 32
#define CAM_CONTENT_COUNT 8
@@ -224,7 +179,6 @@ static struct usb_driver rtl8192_usb_dri
};
-#ifdef RTL8192SU
static void rtl8192SU_read_eeprom_info(struct net_device *dev);
short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
void rtl8192SU_rx_nomal(struct sk_buff* skb);
@@ -247,30 +201,6 @@ struct rtl819x_ops rtl8192su_ops = {
.rtl819x_initial_gain = InitialGain8192S,
.rtl819x_query_rxdesc_status = rtl8192SU_query_rxdesc_status,
};
-#else
-static void rtl8192_read_eeprom_info(struct net_device *dev);
-short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
-void rtl8192_rx_nomal(struct sk_buff* skb);
-void rtl8192_rx_cmd(struct sk_buff *skb);
-bool rtl8192_adapter_start(struct net_device *dev);
-short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
-void rtl8192_link_change(struct net_device *dev);
-void InitialGain819xUsb(struct net_device *dev,u8 Operation);
-void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe);
-
-struct rtl819x_ops rtl8192u_ops = {
- .nic_type = NIC_8192U,
- .rtl819x_read_eeprom_info = rtl8192_read_eeprom_info,
- .rtl819x_tx = rtl8192_tx,
- .rtl819x_tx_cmd = rtl819xU_tx_cmd,
- .rtl819x_rx_nomal = rtl8192_rx_nomal,
- .rtl819x_rx_cmd = rtl8192_rx_cmd,
- .rtl819x_adapter_start = rtl8192_adapter_start,
- .rtl819x_link_change = rtl8192_link_change,
- .rtl819x_initial_gain = InitialGain819xUsb,
- .rtl819x_query_rxdesc_status = query_rxdesc_status,
-};
-#endif
typedef struct _CHANNEL_LIST
@@ -350,7 +280,6 @@ static void rtl819x_set_channel_map(u8 c
#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
-#ifdef RTL8192SU
#define rx_hal_is_cck_rate(_pDesc)\
((_pDesc->RxMCS == DESC92S_RATE1M ||\
_pDesc->RxMCS == DESC92S_RATE2M ||\
@@ -364,14 +293,6 @@ static void rtl819x_set_channel_map(u8 c
_DataRate == MGN_5_5M ||\
_DataRate == MGN_11M )
-#else
-#define rx_hal_is_cck_rate(_pdrvinfo)\
- ((_pdrvinfo->RxRate == DESC90_RATE1M ||\
- _pdrvinfo->RxRate == DESC90_RATE2M ||\
- _pdrvinfo->RxRate == DESC90_RATE5_5M ||\
- _pdrvinfo->RxRate == DESC90_RATE11M) &&\
- !_pdrvinfo->RxHT)
-#endif
@@ -456,11 +377,7 @@ void write_nic_byte(struct net_device *d
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-#ifdef RTL8192SU
indx, 0, &data, 1, HZ / 2);
-#else
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
-#endif
if (status < 0)
{
@@ -481,11 +398,7 @@ void write_nic_word(struct net_device *d
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-#ifdef RTL8192SU
indx, 0, &data, 2, HZ / 2);
-#else
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
-#endif
if (status < 0)
{
@@ -505,11 +418,7 @@ void write_nic_dword(struct net_device *
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-#ifdef RTL8192SU
indx, 0, &data, 4, HZ / 2);
-#else
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
-#endif
if (status < 0)
@@ -530,11 +439,7 @@ u8 read_nic_byte(struct net_device *dev,
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-#ifdef RTL8192SU
indx, 0, &data, 1, HZ / 2);
-#else
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
-#endif
if (status < 0)
{
@@ -555,11 +460,7 @@ u16 read_nic_word(struct net_device *dev
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-#ifdef RTL8192SU
indx, 0, &data, 2, HZ / 2);
-#else
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
-#endif
if (status < 0)
{
@@ -601,11 +502,7 @@ u32 read_nic_dword(struct net_device *de
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-#ifdef RTL8192SU
indx, 0, &data, 4, HZ / 2);
-#else
- (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
-#endif
// if(0 != result) {
// printk(KERN_WARNING "read size of data = %d\, date = %d\n", result, data);
// }
@@ -681,7 +578,6 @@ static int proc_get_stats_ap(char *page,
return len;
}
-#ifdef RTL8192SU
static int proc_get_registers(char *page, char **start,
off_t offset, int count,
int *eof, void *data)
@@ -972,73 +868,6 @@ static int proc_get_registers_e(char *pa
*eof = 1;
return len;
}
-#else
-static int proc_get_registers(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
- int i,n;
-
- int max=0xff;
-
- /* This dump the current register page */
-len += snprintf(page + len, count - len,
- "\n####################page 0##################\n ");
-
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_nic_byte(dev,0x000|n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
-#if 1
-len += snprintf(page + len, count - len,
- "\n####################page 1##################\n ");
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_nic_byte(dev,0x100|n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
-len += snprintf(page + len, count - len,
- "\n####################page 3##################\n ");
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_nic_byte(dev,0x300|n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
-
-#endif
-
- len += snprintf(page + len, count - len,"\n");
- *eof = 1;
- return len;
-
-}
-#endif
#if 0
static int proc_get_cck_reg(char *page, char **start,
@@ -1341,7 +1170,6 @@ void rtl8192_proc_init_one(struct net_de
"/proc/net/rtl8192/%s/registers\n",
dev->name);
}
-#ifdef RTL8192SU
e = create_proc_read_entry("registers-1", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_registers_1, dev);
if (!e) {
@@ -1405,7 +1233,6 @@ void rtl8192_proc_init_one(struct net_de
"/proc/net/rtl8192/%s/registers-e\n",
dev->name);
}
-#endif
#if 0
e = create_proc_read_entry("cck-registers", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_cck_reg, dev);
@@ -2347,7 +2174,6 @@ void rtl8192_update_cap(struct net_devic
priv->short_preamble = cap & WLAN_CAPABILITY_SHORT_PREAMBLE;
//LZM MOD 090303 HW_VAR_ACK_PREAMBLE
-#ifdef RTL8192SU
if(0)
{
u8 tmp = 0;
@@ -2356,15 +2182,6 @@ void rtl8192_update_cap(struct net_devic
tmp |= 0x80;
write_nic_byte(dev, RRSR+2, tmp);
}
-#else
- {
- u32 tmp = 0;
- tmp = priv->basic_rate;
- if (priv->short_preamble)
- tmp |= BRSR_AckShortPmb;
- write_nic_dword(dev, RRSR, tmp);
- }
-#endif
if (net->mode & (IEEE_G|IEEE_N_24G))
{
@@ -2593,7 +2410,6 @@ unsigned int txqueue2outpipe(struct r819
return priv->txqueue_to_outpipemap[tx_queue];
}
-#ifdef RTL8192SU
short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -2653,62 +2469,6 @@ short rtl8192SU_tx_cmd(struct net_device
return -1;
}
}
-#else
-short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- //u8 *tx;
- int status;
- struct urb *tx_urb;
- //int urb_buf_len;
- unsigned int idx_pipe;
- tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data;
- cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
- u8 queue_index = tcb_desc->queue_index;
-
- //printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index);
- atomic_inc(&priv->tx_pending[queue_index]);
-
- tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
- if(!tx_urb){
- dev_kfree_skb(skb);
- return -ENOMEM;
- }
-
- memset(pdesc, 0, USB_HWDESC_HEADER_LEN);
- /* Tx descriptor ought to be set according to the skb->cb */
- pdesc->FirstSeg = 1;//bFirstSeg;
- pdesc->LastSeg = 1;//bLastSeg;
- pdesc->CmdInit = tcb_desc->bCmdOrInit;
- pdesc->TxBufferSize = tcb_desc->txbuf_size;
- pdesc->OWN = 1;
- pdesc->LINIP = tcb_desc->bLastIniPkt;
-
- //----------------------------------------------------------------------------
- // Fill up USB_OUT_CONTEXT.
- //----------------------------------------------------------------------------
- // Get index to out pipe from specified QueueID.
- idx_pipe = txqueue2outpipe(priv,queue_index);
-#ifdef JOHN_DUMP_TXDESC
- int i;
- printk("<Tx descriptor>--rate %x---",rate);
- for (i = 0; i < 8; i++)
- printk("%8x ", tx[i]);
- printk("\n");
-#endif
- usb_fill_bulk_urb(tx_urb,priv->udev, usb_sndbulkpipe(priv->udev,idx_pipe), \
- skb->data, skb->len, rtl8192_tx_isr, skb);
-
- status = usb_submit_urb(tx_urb, GFP_ATOMIC);
- if (!status){
- return 0;
- }else{
- DMESGE("Error TX CMD URB, error %d",
- status);
- return -1;
- }
-}
-#endif
/*
* Mapping Software/Hardware descriptor queue id to "Queue Select Field"
@@ -2763,7 +2523,6 @@ u8 MapHwQueueToFirmwareQueue(u8 QueueID)
return QueueSelect;
}
-#ifdef RTL8192SU
u8 MRateToHwRate8190Pci(u8 rate)
{
u8 ret = DESC92S_RATE1M;
@@ -2828,49 +2587,6 @@ u8 MRateToHwRate8190Pci(u8 rate)
}
return ret;
}
-#else
-u8 MRateToHwRate8190Pci(u8 rate)
-{
- u8 ret = DESC90_RATE1M;
-
- switch(rate) {
- case MGN_1M: ret = DESC90_RATE1M; break;
- case MGN_2M: ret = DESC90_RATE2M; break;
- case MGN_5_5M: ret = DESC90_RATE5_5M; break;
- case MGN_11M: ret = DESC90_RATE11M; break;
- case MGN_6M: ret = DESC90_RATE6M; break;
- case MGN_9M: ret = DESC90_RATE9M; break;
- case MGN_12M: ret = DESC90_RATE12M; break;
- case MGN_18M: ret = DESC90_RATE18M; break;
- case MGN_24M: ret = DESC90_RATE24M; break;
- case MGN_36M: ret = DESC90_RATE36M; break;
- case MGN_48M: ret = DESC90_RATE48M; break;
- case MGN_54M: ret = DESC90_RATE54M; break;
-
- // HT rate since here
- case MGN_MCS0: ret = DESC90_RATEMCS0; break;
- case MGN_MCS1: ret = DESC90_RATEMCS1; break;
- case MGN_MCS2: ret = DESC90_RATEMCS2; break;
- case MGN_MCS3: ret = DESC90_RATEMCS3; break;
- case MGN_MCS4: ret = DESC90_RATEMCS4; break;
- case MGN_MCS5: ret = DESC90_RATEMCS5; break;
- case MGN_MCS6: ret = DESC90_RATEMCS6; break;
- case MGN_MCS7: ret = DESC90_RATEMCS7; break;
- case MGN_MCS8: ret = DESC90_RATEMCS8; break;
- case MGN_MCS9: ret = DESC90_RATEMCS9; break;
- case MGN_MCS10: ret = DESC90_RATEMCS10; break;
- case MGN_MCS11: ret = DESC90_RATEMCS11; break;
- case MGN_MCS12: ret = DESC90_RATEMCS12; break;
- case MGN_MCS13: ret = DESC90_RATEMCS13; break;
- case MGN_MCS14: ret = DESC90_RATEMCS14; break;
- case MGN_MCS15: ret = DESC90_RATEMCS15; break;
- case (0x80|0x20): ret = DESC90_RATEMCS32; break;
-
- default: break;
- }
- return ret;
-}
-#endif
u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc)
{
@@ -2890,7 +2606,6 @@ static void tx_zero_isr(struct urb *tx_u
}
-#ifdef RTL8192SU
/*
* The tx procedure is just as following, skb->cb will contain all the following
*information: * priority, morefrag, rate, &dev.
@@ -3224,311 +2939,47 @@ short rtl8192SU_tx(struct net_device *de
return -1;
}
}
-#else
-/*
- * The tx procedure is just as following,
- * skb->cb will contain all the following information,
- * priority, morefrag, rate, &dev.
- * */
-short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
- tx_desc_819x_usb *tx_desc = (tx_desc_819x_usb *)skb->data;
- tx_fwinfo_819x_usb *tx_fwinfo = (tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
- struct usb_device *udev = priv->udev;
- int pend;
- int status;
- struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
- //int urb_len;
- unsigned int idx_pipe;
-// RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc));
-#if 0
- /* Added by Annie for filling Len_Adjust field. 2005-12-14. */
- RT_ENC_ALG EncAlg = NO_Encryption;
-#endif
-// printk("=============> %s\n", __FUNCTION__);
- pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
- /* we are locked here so the two atomic_read and inc are executed
- * without interleaves
- * !!! For debug purpose
- */
- if( pend > MAX_TX_URB){
#if 0
- switch (tcb_desc->queue_index) {
- case VO_PRIORITY:
- priv->stats.txvodrop++;
- break;
- case VI_PRIORITY:
- priv->stats.txvidrop++;
- break;
- case BE_PRIORITY:
- priv->stats.txbedrop++;
- break;
- default://BK_PRIORITY
- priv->stats.txbkdrop++;
- break;
- }
-#endif
- printk("To discard skb packet!\n");
- dev_kfree_skb_any(skb);
- return -1;
- }
+void rtl8192_set_rate(struct net_device *dev)
+{
+ int i;
+ u16 word;
+ int basic_rate,min_rr_rate,max_rr_rate;
- tx_urb = usb_alloc_urb(0,GFP_ATOMIC);
- if(!tx_urb){
- dev_kfree_skb_any(skb);
- return -ENOMEM;
- }
+// struct r8192_priv *priv = ieee80211_priv(dev);
- /* Fill Tx firmware info */
- memset(tx_fwinfo,0,sizeof(tx_fwinfo_819x_usb));
- /* DWORD 0 */
- tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80)?1:0;
- tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
- tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
- tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
- if(tcb_desc->bAMPDUEnable) {//AMPDU enabled
- tx_fwinfo->AllowAggregation = 1;
- /* DWORD 1 */
- tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
- tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
- } else {
- tx_fwinfo->AllowAggregation = 0;
- /* DWORD 1 */
- tx_fwinfo->RxMF = 0;
- tx_fwinfo->RxAMD = 0;
- }
+ //if (ieee80211_is_54g(priv->ieee80211->current_network) &&
+// priv->ieee80211->state == IEEE80211_LINKED){
+ basic_rate = ieeerate2rtlrate(240);
+ min_rr_rate = ieeerate2rtlrate(60);
+ max_rr_rate = ieeerate2rtlrate(240);
- /* Protection mode related */
- tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable)?1:0;
- tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable)?1:0;
- tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC)?1:0;
- tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80)?1:0;
- tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
- tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT==0)?(tcb_desc->RTSSC):0;
- tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT==1)?((tcb_desc->bRTSBW)?1:0):0;
- tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT==0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
- (tcb_desc->bRTSUseShortGI?1:0);
+//
+// }else{
+// basic_rate = ieeerate2rtlrate(20);
+// min_rr_rate = ieeerate2rtlrate(10);
+// max_rr_rate = ieeerate2rtlrate(110);
+// }
- /* Set Bandwidth and sub-channel settings. */
- if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
- {
- if(tcb_desc->bPacketBW) {
- tx_fwinfo->TxBandwidth = 1;
- tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode
- } else {
- tx_fwinfo->TxBandwidth = 0;
- tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC;
- }
- } else {
- tx_fwinfo->TxBandwidth = 0;
- tx_fwinfo->TxSubCarrier = 0;
- }
+ write_nic_byte(dev, RESP_RATE,
+ max_rr_rate<<MAX_RESP_RATE_SHIFT| min_rr_rate<<MIN_RESP_RATE_SHIFT);
- /* Fill Tx descriptor */
- memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
- /* DWORD 0 */
- tx_desc->LINIP = 0;
- tx_desc->CmdInit = 1;
- tx_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8;
+ //word = read_nic_word(dev, BRSR);
+ word = read_nic_word(dev, BRSR_8187);
+ word &= ~BRSR_MBR_8185;
- {
- tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff;
- }
- /*DWORD 1*/
- tx_desc->SecCAMID= 0;
- tx_desc->RATid = tcb_desc->RATRIndex;
-#if 0
- /* Fill security related */
- if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
- {
- EncAlg = SecGetEncryptionOverhead(
- Adapter,
- &EncryptionMPDUHeadOverhead,
- &EncryptionMPDUTailOverhead,
- NULL,
- NULL,
- FALSE,
- FALSE);
- //2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
- //MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
- MPDUOverhead = EncryptionMPDUTailOverhead;
- tx_desc->NoEnc = 0;
- RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_desc->SecCAMID,tx_desc->SecDescAssign,EncAlg));
- //CamDumpAll(Adapter);
- }
- else
+ for(i=0;i<=basic_rate;i++)
+ word |= (1<<i);
+
+ //write_nic_word(dev, BRSR, word);
+ write_nic_word(dev, BRSR_8187, word);
+ //DMESG("RR:%x BRSR: %x", read_nic_byte(dev,RESP_RATE), read_nic_word(dev,BRSR));
+}
#endif
- {
- //MPDUOverhead = 0;
- tx_desc->NoEnc = 1;
- }
-#if 0
- switch(EncAlg){
- case NO_Encryption:
- tx_desc->SecType = 0x0;
- break;
- case WEP40_Encryption:
- case WEP104_Encryption:
- tx_desc->SecType = 0x1;
- break;
- case TKIP_Encryption:
- tx_desc->SecType = 0x2;
- break;
- case AESCCMP_Encryption:
- tx_desc->SecType = 0x3;
- break;
- default:
- tx_desc->SecType = 0x0;
- break;
- }
-#else
- tx_desc->SecType = 0x0;
-#endif
- if (tcb_desc->bHwSec)
- {
- switch (priv->ieee80211->pairwise_key_type)
- {
- case KEY_TYPE_WEP40:
- case KEY_TYPE_WEP104:
- tx_desc->SecType = 0x1;
- tx_desc->NoEnc = 0;
- break;
- case KEY_TYPE_TKIP:
- tx_desc->SecType = 0x2;
- tx_desc->NoEnc = 0;
- break;
- case KEY_TYPE_CCMP:
- tx_desc->SecType = 0x3;
- tx_desc->NoEnc = 0;
- break;
- case KEY_TYPE_NA:
- tx_desc->SecType = 0x0;
- tx_desc->NoEnc = 1;
- break;
- }
- }
-
- tx_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
- tx_desc->TxFWInfoSize = sizeof(tx_fwinfo_819x_usb);
-
- tx_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
- tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
-
- /* Fill fields that are required to be initialized in all of the descriptors */
- //DWORD 0
-#if 0
- tx_desc->FirstSeg = (tcb_desc->bFirstSeg)? 1:0;
- tx_desc->LastSeg = (tcb_desc->bLastSeg)?1:0;
-#else
- tx_desc->FirstSeg = 1;
- tx_desc->LastSeg = 1;
-#endif
- tx_desc->OWN = 1;
-
- {
- //DWORD 2
- tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN);
- }
- /* Get index to out pipe from specified QueueID */
- idx_pipe = txqueue2outpipe(priv,tcb_desc->queue_index);
-
- //RT_DEBUG_DATA(COMP_SEND,tx_fwinfo,sizeof(tx_fwinfo_819x_usb));
- //RT_DEBUG_DATA(COMP_SEND,tx_desc,sizeof(tx_desc_819x_usb));
-
- /* To submit bulk urb */
- usb_fill_bulk_urb(tx_urb,udev,
- usb_sndbulkpipe(udev,idx_pipe), skb->data,
- skb->len, rtl8192_tx_isr, skb);
-
- status = usb_submit_urb(tx_urb, GFP_ATOMIC);
- if (!status){
-//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
- bool bSend0Byte = false;
- u8 zero = 0;
- if(udev->speed == USB_SPEED_HIGH)
- {
- if (skb->len > 0 && skb->len % 512 == 0)
- bSend0Byte = true;
- }
- else
- {
- if (skb->len > 0 && skb->len % 64 == 0)
- bSend0Byte = true;
- }
- if (bSend0Byte)
- {
-#if 1
- tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC);
- if(!tx_urb_zero){
- RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
- return -ENOMEM;
- }
- usb_fill_bulk_urb(tx_urb_zero,udev,
- usb_sndbulkpipe(udev,idx_pipe), &zero,
- 0, tx_zero_isr, dev);
- status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
- if (status){
- RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
- return -1;
- }
-#endif
- }
- dev->trans_start = jiffies;
- atomic_inc(&priv->tx_pending[tcb_desc->queue_index]);
- return 0;
- }else{
- RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
- status);
- return -1;
- }
-}
-#endif
-
-#if 0
-void rtl8192_set_rate(struct net_device *dev)
-{
- int i;
- u16 word;
- int basic_rate,min_rr_rate,max_rr_rate;
-
-// struct r8192_priv *priv = ieee80211_priv(dev);
-
- //if (ieee80211_is_54g(priv->ieee80211->current_network) &&
-// priv->ieee80211->state == IEEE80211_LINKED){
- basic_rate = ieeerate2rtlrate(240);
- min_rr_rate = ieeerate2rtlrate(60);
- max_rr_rate = ieeerate2rtlrate(240);
-
-//
-// }else{
-// basic_rate = ieeerate2rtlrate(20);
-// min_rr_rate = ieeerate2rtlrate(10);
-// max_rr_rate = ieeerate2rtlrate(110);
-// }
-
- write_nic_byte(dev, RESP_RATE,
- max_rr_rate<<MAX_RESP_RATE_SHIFT| min_rr_rate<<MIN_RESP_RATE_SHIFT);
-
- //word = read_nic_word(dev, BRSR);
- word = read_nic_word(dev, BRSR_8187);
- word &= ~BRSR_MBR_8185;
-
- for(i=0;i<=basic_rate;i++)
- word |= (1<<i);
-
- //write_nic_word(dev, BRSR, word);
- write_nic_word(dev, BRSR_8187, word);
- //DMESG("RR:%x BRSR: %x", read_nic_byte(dev,RESP_RATE), read_nic_word(dev,BRSR));
-}
-#endif
-
-#ifdef RTL8192SU
void rtl8192SU_net_update(struct net_device *dev)
{
@@ -3739,42 +3190,6 @@ void rtl8192SU_link_change(struct net_de
printk("<=====%s 2\n", __func__);
}
-#else
-extern void rtl8192_update_ratr_table(struct net_device* dev);
-void rtl8192_link_change(struct net_device *dev)
-{
-// int i;
-
- struct r8192_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device* ieee = priv->ieee80211;
- //write_nic_word(dev, BCN_INTR_ITV, net->beacon_interval);
- if (ieee->state == IEEE80211_LINKED)
- {
- rtl8192_net_update(dev);
- rtl8192_update_ratr_table(dev);
-#if 1
- //add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08
- if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type))
- EnableHWSecurityConfig8192(dev);
-#endif
- }
- /*update timing params*/
-// RT_TRACE(COMP_CH, "========>%s(), chan:%d\n", __FUNCTION__, priv->chan);
-// rtl8192_set_chan(dev, priv->chan);
- if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC)
- {
- u32 reg = 0;
- reg = read_nic_dword(dev, RCR);
- if (priv->ieee80211->state == IEEE80211_LINKED)
- priv->ReceiveConfig = reg |= RCR_CBSSID;
- else
- priv->ReceiveConfig = reg &= ~RCR_CBSSID;
- write_nic_dword(dev, RCR, reg);
- }
-
-// rtl8192_set_rxconf(dev);
-}
-#endif
static struct ieee80211_qos_parameters def_qos_parameters = {
{3,3,3,3},/* cw_min */
@@ -4072,9 +3487,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(str
struct ieee80211_device* ieee = priv->ieee80211;
// Added by Roger, 2008.08.29.
-#ifdef RTL8192SU
return false;
-#endif
if(ieee->bHalfWirelessN24GMode == true)
Reval = true;
@@ -4156,10 +3569,8 @@ void rtl8192_SetWirelessMode(struct net_
#ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we shoud wait for FPGA
ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting );
#endif
-#ifdef RTL8192SU
//LZM 090306 usb crash here, mark it temp
//write_nic_word(dev, SIFS_OFDM, 0x0e0e);
-#endif
priv->ieee80211->mode = wireless_mode;
if ((wireless_mode == WIRELESS_MODE_N_24G) || (wireless_mode == WIRELESS_MODE_N_5G))
@@ -4374,7 +3785,6 @@ static void rtl8192_init_priv_variable(s
priv->ieee80211->InitialGainHandler = priv->ops->rtl819x_initial_gain;
priv->card_type = USB;
-#ifdef RTL8192SU
//1 RTL8192SU/
priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL;
priv->ieee80211->SetFwCmdHandler = HalSetFwCmd8192S;
@@ -4433,51 +3843,6 @@ static void rtl8192_init_priv_variable(s
//1 End
-#else
-
-#ifdef TO_DO_LIST
- if(Adapter->bInHctTest)
- {
- pHalData->ShortRetryLimit = 7;
- pHalData->LongRetryLimit = 7;
- }
-#endif
- {
- priv->ShortRetryLimit = 0x30;
- priv->LongRetryLimit = 0x30;
- }
- priv->EarlyRxThreshold = 7;
- priv->enable_gpio0 = 0;
- priv->TransmitConfig =
- // TCR_DurProcMode | //for RTL8185B, duration setting by HW
- //? TCR_DISReqQsize |
- (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
- (priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
- (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
- (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
-#ifdef TO_DO_LIST
- if(Adapter->bInHctTest)
- pHalData->ReceiveConfig = pHalData->CSMethod |
- RCR_AMF | RCR_ADF | //RCR_AAP | //accept management/data
- //guangan200710
- RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
- RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
- RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
- ((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
- (pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
- (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0);
- else
-
-#endif
- priv->ReceiveConfig =
- RCR_AMF | RCR_ADF | //accept management/data
- RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
- RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
- //RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
- ((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
- (priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
- (priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0);
-#endif
priv->AcmControl = 0;
priv->pFirmware = (rt_firmware*)vmalloc(sizeof(rt_firmware));
@@ -4568,7 +3933,6 @@ static inline u16 endian_swap(u16* data)
return *data;
}
-#ifdef RTL8192SU
u8 rtl8192SU_UsbOptionToEndPointNumber(u8 UsbOption)
{
u8 nEndPoint = 0;
@@ -6005,292 +5369,25 @@ static void rtl8192SU_read_eeprom_info(s
//return RT_STATUS_SUCCESS;
}
-#else
-static void rtl8192_read_eeprom_info(struct net_device* dev)
+
+short rtl8192_get_channel_map(struct net_device * dev)
{
- u16 wEPROM_ID = 0;
- u8 bMac_Tmp_Addr[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x02};
- u8 bLoad_From_EEPOM = false;
struct r8192_priv *priv = ieee80211_priv(dev);
- u16 tmpValue = 0;
- RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
- wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out;
- RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
-
- if (wEPROM_ID != RTL8190_EEPROM_ID)
- {
- RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", wEPROM_ID, RTL8190_EEPROM_ID);
- }
- else
- bLoad_From_EEPOM = true;
-
- if (bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (EEPROM_VID>>1));
- priv->eeprom_vid = endian_swap(&tmpValue);
- priv->eeprom_pid = eprom_read(dev, (EEPROM_PID>>1));
- tmpValue = eprom_read(dev, (EEPROM_ChannelPlan>>1));
- priv->eeprom_ChannelPlan =((tmpValue&0xff00)>>8);
- priv->btxpowerdata_readfromEEPORM = true;
- priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID>>1)) >>8;
- }
- else
- {
- priv->eeprom_vid = 0;
- priv->eeprom_pid = 0;
- priv->card_8192_version = VERSION_819xU_B;
- priv->eeprom_ChannelPlan = 0;
- priv->eeprom_CustomerID = 0;
- }
- RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan);
- //set channelplan from eeprom
- priv->ChannelPlan = priv->eeprom_ChannelPlan;
- if (bLoad_From_EEPOM)
- {
- int i;
- for (i=0; i<6; i+=2)
- {
- u16 tmp = 0;
- tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
- *(u16*)(&dev->dev_addr[i]) = tmp;
- }
- }
- else
- {
- memcpy(dev->dev_addr, bMac_Tmp_Addr, 6);
- //should I set IDR0 here?
+ if(priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){
+ printk("rtl8180_init:Error channel plan! Set to default.\n");
+ priv->ChannelPlan= 0;
}
- RT_TRACE(COMP_EPROM, "MAC addr:"MAC_FMT"\n", MAC_ARG(dev->dev_addr));
- priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
- priv->rf_chip = RF_8256;
+ RT_TRACE(COMP_INIT, "Channel plan is %d\n",priv->ChannelPlan);
- if (priv->card_8192_version == (u8)VERSION_819xU_A)
- {
- //read Tx power gain offset of legacy OFDM to HT rate
- if (bLoad_From_EEPOM)
- priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff>>1))&0xff00) >> 8;
- else
- priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower;
- RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff);
- //read ThermalMeter from EEPROM
- if (bLoad_From_EEPOM)
- priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter>>1))&0x00ff);
- else
- priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
- RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter);
- //vivi, for tx power track
- priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
- //read antenna tx power offset of B/C/D to A from EEPROM
- if (bLoad_From_EEPOM)
- priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff>>1))&0x0f00)>>8;
- else
- priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
- RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff);
- // Read CrystalCap from EEPROM
- if (bLoad_From_EEPOM)
- priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap>>1))&0x0f);
- else
- priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
- RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap);
- //get per-channel Tx power level
- if (bLoad_From_EEPOM)
- priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver>>1))&0xff00)>>8;
- else
- priv->EEPROM_Def_Ver = 1;
- RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
- if (priv->EEPROM_Def_Ver == 0) //old eeprom definition
- {
- int i;
- if (bLoad_From_EEPOM)
- priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
- else
- priv->EEPROMTxPowerLevelCCK = 0x10;
- RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
- for (i=0; i<3; i++)
- {
- if (bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G+i)>>1);
- if (((EEPROM_TxPwIndex_OFDM_24G+i) % 2) == 0)
- tmpValue = tmpValue & 0x00ff;
- else
- tmpValue = (tmpValue & 0xff00) >> 8;
- }
- else
- tmpValue = 0x10;
- priv->EEPROMTxPowerLevelOFDM24G[i] = (u8) tmpValue;
- RT_TRACE(COMP_EPROM, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK);
- }
- }//end if EEPROM_DEF_VER == 0
- else if (priv->EEPROM_Def_Ver == 1)
- {
- if (bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1>>1));
- tmpValue = (tmpValue & 0xff00) >> 8;
- }
- else
- tmpValue = 0x10;
- priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue;
-
- if (bLoad_From_EEPOM)
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2)>>1);
- else
- tmpValue = 0x1010;
- *((u16*)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
- if (bLoad_From_EEPOM)
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1>>1));
- else
- tmpValue = 0x1010;
- *((u16*)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
- if (bLoad_From_EEPOM)
- tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1+2)>>1);
- else
- tmpValue = 0x10;
- priv->EEPROMTxPowerLevelOFDM24G[2] = (u8)tmpValue;
- }//endif EEPROM_Def_Ver == 1
-
- //update HAL variables
- //
- {
- int i;
- for (i=0; i<14; i++)
- {
- if (i<=3)
- priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0];
- else if (i>=4 && i<=9)
- priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1];
- else
- priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2];
- }
-
- for (i=0; i<14; i++)
- {
- if (priv->EEPROM_Def_Ver == 0)
- {
- if (i<=3)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
- else if (i>=4 && i<=9)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK;
- else
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
- }
- else if (priv->EEPROM_Def_Ver == 1)
- {
- if (i<=3)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0];
- else if (i>=4 && i<=9)
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1];
- else
- priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2];
- }
- }
- }//end update HAL variables
- priv->TxPowerDiff = priv->EEPROMPwDiff;
-// Antenna B gain offset to antenna A, bit0~3
- priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
- // Antenna C gain offset to antenna A, bit4~7
- priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
- // CrystalCap, bit12~15
- priv->CrystalCap = priv->EEPROMCrystalCap;
- // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
- // 92U does not enable TX power tracking.
- priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
- }//end if VersionID == VERSION_819xU_A
-
-//added by vivi, for dlink led, 20080416
- switch(priv->eeprom_CustomerID)
- {
- case EEPROM_CID_RUNTOP:
- priv->CustomerID = RT_CID_819x_RUNTOP;
- break;
-
- case EEPROM_CID_DLINK:
- priv->CustomerID = RT_CID_DLINK;
- break;
-
- default:
- priv->CustomerID = RT_CID_DEFAULT;
- break;
-
- }
-
- switch(priv->CustomerID)
- {
- case RT_CID_819x_RUNTOP:
- priv->LedStrategy = SW_LED_MODE2;
- break;
-
- case RT_CID_DLINK:
- priv->LedStrategy = SW_LED_MODE4;
- break;
-
- default:
- priv->LedStrategy = SW_LED_MODE0;
- break;
-
- }
-
-
- if(priv->rf_type == RF_1T2R)
- {
- RT_TRACE(COMP_EPROM, "\n1T2R config\n");
- }
- else
- {
- RT_TRACE(COMP_EPROM, "\n2T4R config\n");
- }
-
- // 2008/01/16 MH We can only know RF type in the function. So we have to init
- // DIG RATR table again.
- init_rate_adaptive(dev);
- //we need init DIG RATR table here again.
-
- RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__);
- return;
-}
-#endif
-
-short rtl8192_get_channel_map(struct net_device * dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- if(priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){
- printk("rtl8180_init:Error channel plan! Set to default.\n");
- priv->ChannelPlan= 0;
- }
- RT_TRACE(COMP_INIT, "Channel plan is %d\n",priv->ChannelPlan);
-
- rtl819x_set_channel_map(priv->ChannelPlan, priv);
- return 0;
-}
+ rtl819x_set_channel_map(priv->ChannelPlan, priv);
+ return 0;
+}
short rtl8192_init(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
-#ifndef RTL8192SU
- memset(&(priv->stats),0,sizeof(struct Stats));
- memset(priv->txqueue_to_outpipemap,0,9);
-#ifdef PIPE12
- {
- int i=0;
- u8 queuetopipe[]={3,2,1,0,4,8,7,6,5};
- memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
-/* for(i=0;i<9;i++)
- printk("%d ",priv->txqueue_to_outpipemap[i]);
- printk("\n");*/
- }
-#else
- {
- u8 queuetopipe[]={3,2,1,0,4,4,0,4,4};
- memcpy(priv->txqueue_to_outpipemap,queuetopipe,9);
-/* for(i=0;i<9;i++)
- printk("%d ",priv->txqueue_to_outpipemap[i]);
- printk("\n");*/
- }
-#endif
-#endif
rtl8192_init_priv_variable(dev);
rtl8192_init_priv_lock(priv);
rtl8192_init_priv_task(dev);
@@ -6404,7 +5501,6 @@ void rtl8192_hwconfig(struct net_device*
}
-#ifdef RTL8192SU
//
// Description:
@@ -6892,9 +5988,7 @@ void rtl8192SU_HwConfigureRTL8192SUsb(st
//rtl8192SU_SetHwRegAmpduMinSpace(dev, priv->MinSpaceCfg);
}
-#endif
-#ifdef RTL8192SU
// Description: Initial HW relted registers.
//
// Assumption: This function is only invoked at driver intialization once.
@@ -7232,247 +6326,6 @@ end:
return rtStatus;
}
-#else
-
-//InitializeAdapter and PhyCfg
-bool rtl8192_adapter_start(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- u32 dwRegRead = 0;
- bool init_status = true;
- RT_TRACE(COMP_INIT, "====>%s()\n", __FUNCTION__);
- priv->Rf_Mode = RF_OP_By_SW_3wire;
- //for ASIC power on sequence
- write_nic_byte_E(dev, 0x5f, 0x80);
- mdelay(50);
- write_nic_byte_E(dev, 0x5f, 0xf0);
- write_nic_byte_E(dev, 0x5d, 0x00);
- write_nic_byte_E(dev, 0x5e, 0x80);
- write_nic_byte(dev, 0x17, 0x37);
- mdelay(10);
-//#ifdef TO_DO_LIST
- priv->pFirmware->firmware_status = FW_STATUS_0_INIT;
- //config CPUReset Register
- //Firmware Reset or not?
- dwRegRead = read_nic_dword(dev, CPU_GEN);
- if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT)
- dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here?
- else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY)
- dwRegRead |= CPU_GEN_FIRMWARE_RESET;
- else
- RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__, priv->pFirmware->firmware_status);
-
- write_nic_dword(dev, CPU_GEN, dwRegRead);
- //mdelay(30);
- //config BB.
- rtl8192_BBConfig(dev);
-
-#if 1
- //Loopback mode or not
- priv->LoopbackMode = RTL819xU_NO_LOOPBACK;
-// priv->LoopbackMode = RTL819xU_MAC_LOOPBACK;
-
- dwRegRead = read_nic_dword(dev, CPU_GEN);
- if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK)
- dwRegRead = ((dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET);
- else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK)
- dwRegRead |= CPU_CCK_LOOPBACK;
- else
- RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __FUNCTION__, priv->LoopbackMode);
-
- write_nic_dword(dev, CPU_GEN, dwRegRead);
-
- //after reset cpu, we need wait for a seconds to write in register.
- udelay(500);
-
- //xiong add for new bitfile:usb suspend reset pin set to 1. //do we need?
- write_nic_byte_E(dev, 0x5f, (read_nic_byte_E(dev, 0x5f)|0x20));
-
- //Set Hardware
- rtl8192_hwconfig(dev);
-
- //turn on Tx/Rx
- write_nic_byte(dev, CMDR, CR_RE|CR_TE);
-
- //set IDR0 here
- write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]);
- write_nic_word(dev, MAC4, ((u16*)(dev->dev_addr + 4))[0]);
-
- //set RCR
- write_nic_dword(dev, RCR, priv->ReceiveConfig);
-
- //Initialize Number of Reserved Pages in Firmware Queue
- write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
- NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
- NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
- NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
- write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |\
- NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
- write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
- NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT
-// | NUM_OF_PAGE_IN_FW_QUEUE_PUB<<RSVD_FW_QUEUE_PAGE_PUB_SHIFT
- );
- write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
-
- //Set AckTimeout
- // TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
- write_nic_byte(dev, ACK_TIMEOUT, 0x30);
-
-// RT_TRACE(COMP_INIT, "%s():priv->ResetProgress is %d\n", __FUNCTION__,priv->ResetProgress);
- if(priv->ResetProgress == RESET_TYPE_NORESET)
- rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
- if(priv->ResetProgress == RESET_TYPE_NORESET){
- CamResetAllEntry(dev);
- {
- u8 SECR_value = 0x0;
- SECR_value |= SCR_TxEncEnable;
- SECR_value |= SCR_RxDecEnable;
- SECR_value |= SCR_NoSKMC;
- write_nic_byte(dev, SECR, SECR_value);
- }
- }
-
- //Beacon related
- write_nic_word(dev, ATIMWND, 2);
- write_nic_word(dev, BCN_INTERVAL, 100);
-
- {
-#define DEFAULT_EDCA 0x005e4332
- int i;
- for (i=0; i<QOS_QUEUE_NUM; i++)
- write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
- }
-
- rtl8192_phy_configmac(dev);
-
- if (priv->card_8192_version == (u8) VERSION_819xU_A)
- {
- rtl8192_phy_getTxPower(dev);
- rtl8192_phy_setTxPower(dev, priv->chan);
- }
-
-
- priv->usb_error = false;
- //Firmware download
- init_status = init_firmware(dev);
- if(!init_status)
- {
- RT_TRACE(COMP_ERR,"ERR!!! %s(): Firmware download is failed\n", __FUNCTION__);
- return init_status;
- }
- RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__);
- //
-#ifdef TO_DO_LIST
-if(Adapter->ResetProgress == RESET_TYPE_NORESET)
- {
- if(pMgntInfo->RegRfOff == TRUE)
- { // User disable RF via registry.
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
- MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- // Those action will be discard in MgntActSet_RF_State because off the same state
- for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
- }
- else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS)
- { // H/W or S/W RF OFF before sleep.
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
- MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
- }
- else
- {
- pHalData->eRFPowerState = eRfOn;
- pMgntInfo->RfOffReason = 0;
- RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
- }
- }
- else
- {
- if(pHalData->eRFPowerState == eRfOff)
- {
- MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
- // Those action will be discard in MgntActSet_RF_State because off the same state
- for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
- }
- }
-#endif
- //config RF.
- if(priv->ResetProgress == RESET_TYPE_NORESET){
- rtl8192_phy_RFConfig(dev);
- RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __FUNCTION__);
- }
-
-
- if(priv->ieee80211->FwRWRF)
- // We can force firmware to do RF-R/W
- priv->Rf_Mode = RF_OP_By_FW;
- else
- priv->Rf_Mode = RF_OP_By_SW_3wire;
-
-
- rtl8192_phy_updateInitGain(dev);
- /*--set CCK and OFDM Block "ON"--*/
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
-
- if(priv->ResetProgress == RESET_TYPE_NORESET)
- {
- //if D or C cut
- u8 tmpvalue = read_nic_byte(dev, 0x301);
- if(tmpvalue ==0x03)
- {
- priv->bDcut = TRUE;
- RT_TRACE(COMP_POWER_TRACKING, "D-cut\n");
- }
- else
- {
- priv->bDcut = FALSE;
- RT_TRACE(COMP_POWER_TRACKING, "C-cut\n");
- }
- dm_initialize_txpower_tracking(dev);
-
- if(priv->bDcut == TRUE)
- {
- u32 i, TempCCk;
- u32 tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
- // u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
- for(i = 0; i<TxBBGainTableLength; i++)
- {
- if(tmpRegA == priv->txbbgain_table[i].txbbgain_value)
- {
- priv->rfa_txpowertrackingindex= (u8)i;
- priv->rfa_txpowertrackingindex_real= (u8)i;
- priv->rfa_txpowertracking_default= priv->rfa_txpowertrackingindex;
- break;
- }
- }
-
- TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
-
- for(i=0 ; i<CCKTxBBGainTableLength ; i++)
- {
-
- if(TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
- {
- priv->cck_present_attentuation_20Mdefault=(u8) i;
- break;
- }
- }
- priv->cck_present_attentuation_40Mdefault= 0;
- priv->cck_present_attentuation_difference= 0;
- priv->cck_present_attentuation = priv->cck_present_attentuation_20Mdefault;
-
- // pMgntInfo->bTXPowerTracking = FALSE;//TEMPLY DISABLE
- }
- }
- write_nic_byte(dev, 0x87, 0x0);
-
-
-#endif
- return init_status;
-}
-
-#endif
/* this configures registers for beacon tx and enables it via
* rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
* be used to stop beacon transmission
@@ -8489,7 +7342,6 @@ out:
return ret;
}
-#ifdef RTL8192SU
u8 rtl8192SU_HwRateToMRate(bool bIsHT, u8 rate,bool bFirstAMPDU)
{
@@ -8592,7 +7444,6 @@ u8 rtl8192SU_HwRateToMRate(bool bIsHT, u
}
return ret_rate;
}
-#endif
u8 HwRateToMRate90(bool bIsHT, u8 rate)
{
@@ -9043,7 +7894,6 @@ rtl819x_signal_scale_mapping(
return retsig;
}
-#ifdef RTL8192SU
/*-----------------------------------------------------------------------------
* Function: QueryRxPhyStatus8192S()
*
@@ -9109,17 +7959,6 @@ static void rtl8192SU_query_rxphystatus(
pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
-#ifndef RTL8192SU
- phy_sts_ofdm_819xusb_t* pofdm_buf = NULL;
- prxpkt = (u8*)pdrvinfo;
-
- /* Move pointer to the 16th bytes. Phy status start address. */
- prxpkt += sizeof(rx_drvinfo_819x_usb);
-
- /* Initial the cck and ofdm buffer pointer */
- pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt;
- pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt;
-#endif
pstats->RxMIMOSignalQuality[0] = -1;
pstats->RxMIMOSignalQuality[1] = -1;
@@ -9346,314 +8185,63 @@ static void rtl8192SU_query_rxphystatus(
pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num)));
}
}/* QueryRxPhyStatus8192S */
-#else
-static void rtl8192_query_rxphystatus(
+
+void
+rtl8192_record_rxdesc_forlateruse(
+ struct ieee80211_rx_stats * psrc_stats,
+ struct ieee80211_rx_stats * ptarget_stats
+)
+{
+ ptarget_stats->bIsAMPDU = psrc_stats->bIsAMPDU;
+ ptarget_stats->bFirstMPDU = psrc_stats->bFirstMPDU;
+ ptarget_stats->Seq_Num = psrc_stats->Seq_Num;
+}
+
+static void rtl8192SU_query_rxphystatus(
struct r8192_priv * priv,
struct ieee80211_rx_stats * pstats,
+ rx_desc_819x_usb *pDesc,
rx_drvinfo_819x_usb * pdrvinfo,
struct ieee80211_rx_stats * precord_stats,
bool bpacket_match_bssid,
bool bpacket_toself,
bool bPacketBeacon,
bool bToSelfBA
- )
+ );
+void rtl8192SU_TranslateRxSignalStuff(struct sk_buff *skb,
+ struct ieee80211_rx_stats * pstats,
+ rx_desc_819x_usb *pDesc,
+ rx_drvinfo_819x_usb *pdrvinfo)
{
- //PRT_RFD_STATUS pRtRfdStatus = &(pRfd->Status);
- phy_sts_ofdm_819xusb_t* pofdm_buf;
- phy_sts_cck_819xusb_t * pcck_buf;
- phy_ofdm_rx_status_rxsc_sgien_exintfflag* prxsc;
- u8 *prxpkt;
- u8 i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg;
- char rx_pwr[4], rx_pwr_all=0;
- //long rx_avg_pwr = 0;
- char rx_snrX, rx_evmX;
- u8 evm, pwdb_all;
- u32 RSSI, total_rssi=0;//, total_evm=0;
-// long signal_strength_index = 0;
- u8 is_cck_rate=0;
- u8 rf_rx_num = 0;
-
-
- priv->stats.numqry_phystatus++;
-
- is_cck_rate = rx_hal_is_cck_rate(pdrvinfo);
+ // TODO: We must only check packet for current MAC address. Not finish
+ rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
+ struct net_device *dev=info->dev;
+ struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
+ bool bpacket_match_bssid, bpacket_toself;
+ bool bPacketBeacon=FALSE, bToSelfBA=FALSE;
+ static struct ieee80211_rx_stats previous_stats;
+ struct ieee80211_hdr_3addr *hdr;//by amy
+ u16 fc,type;
- // Record it for next packet processing
- memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats));
- pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid;
- pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself;
- pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;//RX_HAL_IS_CCK_RATE(pDrvInfo);
- pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
- pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
+ // Get Signal Quality for only RX data queue (but not command queue)
- prxpkt = (u8*)pdrvinfo;
+ u8* tmp_buf;
+ //u16 tmp_buf_len = 0;
+ u8 *praddr;
- /* Move pointer to the 16th bytes. Phy status start address. */
- prxpkt += sizeof(rx_drvinfo_819x_usb);
+ /* Get MAC frame start address. */
+ tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
- /* Initial the cck and ofdm buffer pointer */
- pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt;
- pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt;
+ hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
+ fc = le16_to_cpu(hdr->frame_ctl);
+ type = WLAN_FC_GET_TYPE(fc);
+ praddr = hdr->addr1;
- pstats->RxMIMOSignalQuality[0] = -1;
- pstats->RxMIMOSignalQuality[1] = -1;
- precord_stats->RxMIMOSignalQuality[0] = -1;
- precord_stats->RxMIMOSignalQuality[1] = -1;
-
- if(is_cck_rate)
- {
- //
- // (1)Hardware does not provide RSSI for CCK
- //
-
- //
- // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
- //
- u8 report;//, cck_agc_rpt;
-
- priv->stats.numqry_phystatusCCK++;
-
- if(!priv->bCckHighPower)
- {
- report = pcck_buf->cck_agc_rpt & 0xc0;
- report = report>>6;
- switch(report)
- {
- //Fixed by Jacken from Bryant 2008-03-20
- //Original value is -38 , -26 , -14 , -2
- //Fixed value is -35 , -23 , -11 , 6
- case 0x3:
- rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- case 0x2:
- rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- case 0x1:
- rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- case 0x0:
- rx_pwr_all = 6 - (pcck_buf->cck_agc_rpt & 0x3e);
- break;
- }
- }
- else
- {
- report = pcck_buf->cck_agc_rpt & 0x60;
- report = report>>5;
- switch(report)
- {
- case 0x3:
- rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
- break;
- case 0x2:
- rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
- break;
- case 0x1:
- rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
- break;
- case 0x0:
- rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
- break;
- }
- }
-
- pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
- pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
- pstats->RecvSignalPower = pwdb_all;
-
- //
- // (3) Get Signal Quality (EVM)
- //
- //if(bpacket_match_bssid)
- {
- u8 sq;
-
- if(pstats->RxPWDBAll > 40)
- {
- sq = 100;
- }else
- {
- sq = pcck_buf->sq_rpt;
-
- if(pcck_buf->sq_rpt > 64)
- sq = 0;
- else if (pcck_buf->sq_rpt < 20)
- sq = 100;
- else
- sq = ((64-sq) * 100) / 44;
- }
- pstats->SignalQuality = precord_stats->SignalQuality = sq;
- pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
- pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1;
- }
- }
- else
- {
- priv->stats.numqry_phystatusHT++;
- //
- // (1)Get RSSI for HT rate
- //
- for(i=RF90_PATH_A; i<priv->NumTotalRFPath; i++)
- {
- // 2008/01/30 MH we will judge RF RX path now.
- if (priv->brfpath_rxenable[i])
- rf_rx_num++;
- else
- continue;
-
- if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
- continue;
-
- //Fixed by Jacken from Bryant 2008-03-20
- //Original value is 106
- rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
-
- //Get Rx snr value in DB
- tmp_rxsnr = pofdm_buf->rxsnr_X[i];
- rx_snrX = (char)(tmp_rxsnr);
- //rx_snrX >>= 1;;
- rx_snrX /= 2;
- priv->stats.rxSNRdB[i] = (long)rx_snrX;
-
- /* Translate DBM to percentage. */
- RSSI = rtl819x_query_rxpwrpercentage(rx_pwr[i]);
- total_rssi += RSSI;
-
- /* Record Signal Strength for next packet */
- //if(bpacket_match_bssid)
- {
- pstats->RxMIMOSignalStrength[i] =(u8) RSSI;
- precord_stats->RxMIMOSignalStrength[i] =(u8) RSSI;
- }
- }
-
-
- //
- // (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
- //
- //Fixed by Jacken from Bryant 2008-03-20
- //Original value is 106
- rx_pwr_all = (((pofdm_buf->pwdb_all ) >> 1 )& 0x7f) -106;
- pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
-
- pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
- pstats->RxPower = precord_stats->RxPower = rx_pwr_all;
-
- //
- // (3)EVM of HT rate
- //
- if(pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 &&
- pdrvinfo->RxRate<=DESC90_RATEMCS15)
- max_spatial_stream = 2; //both spatial stream make sense
- else
- max_spatial_stream = 1; //only spatial stream 1 makes sense
-
- for(i=0; i<max_spatial_stream; i++)
- {
- tmp_rxevm = pofdm_buf->rxevm_X[i];
- rx_evmX = (char)(tmp_rxevm);
-
- // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
- // fill most significant bit to "zero" when doing shifting operation which may change a negative
- // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
- rx_evmX /= 2; //dbm
-
- evm = rtl819x_evm_dbtopercentage(rx_evmX);
-#if 0
- EVM = SignalScaleMapping(EVM);//make it good looking, from 0~100
-#endif
- //if(bpacket_match_bssid)
- {
- if(i==0) // Fill value in RFD, Get the first spatial stream only
- pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
- pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
- }
- }
-
-
- /* record rx statistics for debug */
- rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
- prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
- if(pdrvinfo->BW) //40M channel
- priv->stats.received_bwtype[1+prxsc->rxsc]++;
- else //20M channel
- priv->stats.received_bwtype[0]++;
- }
-
- //UI BSS List signal strength(in percentage), make it good looking, from 0~100.
- //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
- if(is_cck_rate)
- {
- pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL;
-
- }
- else
- {
- //pRfd->Status.SignalStrength = pRecordRfd->Status.SignalStrength = (u8)(SignalScaleMapping(total_rssi/=RF90_PATH_MAX));//(u8)(total_rssi/=RF90_PATH_MAX);
- // We can judge RX path number now.
- if (rf_rx_num != 0)
- pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi/=rf_rx_num)));
- }
-} /* QueryRxPhyStatus8190Pci */
-#endif
-
-void
-rtl8192_record_rxdesc_forlateruse(
- struct ieee80211_rx_stats * psrc_stats,
- struct ieee80211_rx_stats * ptarget_stats
-)
-{
- ptarget_stats->bIsAMPDU = psrc_stats->bIsAMPDU;
- ptarget_stats->bFirstMPDU = psrc_stats->bFirstMPDU;
- ptarget_stats->Seq_Num = psrc_stats->Seq_Num;
-}
-
-#ifdef RTL8192SU
-static void rtl8192SU_query_rxphystatus(
- struct r8192_priv * priv,
- struct ieee80211_rx_stats * pstats,
- rx_desc_819x_usb *pDesc,
- rx_drvinfo_819x_usb * pdrvinfo,
- struct ieee80211_rx_stats * precord_stats,
- bool bpacket_match_bssid,
- bool bpacket_toself,
- bool bPacketBeacon,
- bool bToSelfBA
- );
-void rtl8192SU_TranslateRxSignalStuff(struct sk_buff *skb,
- struct ieee80211_rx_stats * pstats,
- rx_desc_819x_usb *pDesc,
- rx_drvinfo_819x_usb *pdrvinfo)
-{
- // TODO: We must only check packet for current MAC address. Not finish
- rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
- struct net_device *dev=info->dev;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- bool bpacket_match_bssid, bpacket_toself;
- bool bPacketBeacon=FALSE, bToSelfBA=FALSE;
- static struct ieee80211_rx_stats previous_stats;
- struct ieee80211_hdr_3addr *hdr;//by amy
- u16 fc,type;
-
- // Get Signal Quality for only RX data queue (but not command queue)
-
- u8* tmp_buf;
- //u16 tmp_buf_len = 0;
- u8 *praddr;
-
- /* Get MAC frame start address. */
- tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
-
- hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
- fc = le16_to_cpu(hdr->frame_ctl);
- type = WLAN_FC_GET_TYPE(fc);
- praddr = hdr->addr1;
-
- /* Check if the received packet is acceptabe. */
- bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
- (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
- && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
- bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
+ /* Check if the received packet is acceptabe. */
+ bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
+ (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
+ && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
+ bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
#if 1//cosa
if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
@@ -9688,75 +8276,6 @@ void rtl8192SU_TranslateRxSignalStuff(st
rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
}
-#else
-void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
- struct ieee80211_rx_stats * pstats,
- rx_drvinfo_819x_usb *pdrvinfo)
-{
- // TODO: We must only check packet for current MAC address. Not finish
- rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
- struct net_device *dev=info->dev;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- bool bpacket_match_bssid, bpacket_toself;
- bool bPacketBeacon=FALSE, bToSelfBA=FALSE;
- static struct ieee80211_rx_stats previous_stats;
- struct ieee80211_hdr_3addr *hdr;//by amy
- u16 fc,type;
-
- // Get Signal Quality for only RX data queue (but not command queue)
-
- u8* tmp_buf;
- //u16 tmp_buf_len = 0;
- u8 *praddr;
-
- /* Get MAC frame start address. */
- tmp_buf = (u8*)skb->data;// + get_rxpacket_shiftbytes_819xusb(pstats);
-
- hdr = (struct ieee80211_hdr_3addr *)tmp_buf;
- fc = le16_to_cpu(hdr->frame_ctl);
- type = WLAN_FC_GET_TYPE(fc);
- praddr = hdr->addr1;
-
- /* Check if the received packet is acceptabe. */
- bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
- (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
- && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
- bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
-
-#if 1//cosa
- if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON)
- {
- bPacketBeacon = true;
- //DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
- }
- if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK)
- {
- if((eqMacAddr(praddr,dev->dev_addr)))
- bToSelfBA = true;
- //DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf);
- }
-
-#endif
-
-
- if(bpacket_match_bssid)
- {
- priv->stats.numpacket_matchbssid++;
- }
- if(bpacket_toself){
- priv->stats.numpacket_toself++;
- }
- //
- // Process PHY information for previous packet (RSSI/PWDB/EVM)
- //
- // Because phy information is contained in the last packet of AMPDU only, so driver
- // should process phy information of previous packet
- rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats);
- rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid,bpacket_toself,bPacketBeacon,bToSelfBA);
- rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
-
-}
-#endif
/**
* Function: UpdateReceivedRateHistogramStatistics
@@ -9840,7 +8359,6 @@ UpdateReceivedRateHistogramStatistics819
priv->stats.received_rate_histogram[rcvType][rateIndex]++;
}
-#ifdef RTL8192SU
void rtl8192SU_query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe)
{
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
@@ -9978,128 +8496,7 @@ if(stats->bHwError)
rtl8192SU_TranslateRxSignalStuff(skb, stats, desc, driver_info);
}
}
-#else
-void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, bool bIsRxAggrSubframe)
-{
- rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
- struct net_device *dev=info->dev;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
- rx_drvinfo_819x_usb *driver_info = NULL;
-
- //
- //Get Rx Descriptor Information
- //
- {
- rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
-
- stats->Length = desc->Length;
- stats->RxDrvInfoSize = desc->RxDrvInfoSize;
- stats->RxBufShift = 0;//desc->Shift&0x03;
- stats->bICV = desc->ICV;
- stats->bCRC = desc->CRC32;
- stats->bHwError = stats->bCRC|stats->bICV;
- //RTL8190 set this bit to indicate that Hw does not decrypt packet
- stats->Decrypted = !desc->SWDec;
- }
-
- if((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
- {
- stats->bHwError = false;
- }
- else
- {
- stats->bHwError = stats->bCRC|stats->bICV;
- }
-
- if(stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
- stats->bHwError |= 1;
- //
- //Get Driver Info
- //
- // TODO: Need to verify it on FGPA platform
- //Driver info are written to the RxBuffer following rx desc
- if (stats->RxDrvInfoSize != 0) {
- driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \
- stats->RxBufShift);
- /* unit: 0.5M */
- /* TODO */
- if(!stats->bHwError){
- u8 ret_rate;
- ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate);
- if(ret_rate == 0xff)
- {
- // Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate.
- // Special Error Handling here, 2008.05.16, by Emily
-
- stats->bHwError = 1;
- stats->rate = MGN_1M; //Set 1M rate by default
- }else
- {
- stats->rate = ret_rate;
- }
- }
- else
- stats->rate = 0x02;
-
- stats->bShortPreamble = driver_info->SPLCP;
-
-
- UpdateReceivedRateHistogramStatistics8190(dev, stats);
-
- stats->bIsAMPDU = (driver_info->PartAggr==1);
- stats->bFirstMPDU = (driver_info->PartAggr==1) && (driver_info->FirstAGGR==1);
-#if 0
- // TODO: it is debug only. It should be disabled in released driver. 2007.1.12 by Joseph
- UpdateRxAMPDUHistogramStatistics8190(Adapter, pRfd);
-#endif
- stats->TimeStampLow = driver_info->TSFL;
- // xiong mask it, 070514
- //pRfd->Status.TimeStampHigh = PlatformEFIORead4Byte(Adapter, TSFR+4);
- // stats->TimeStampHigh = read_nic_dword(dev, TSFR+4);
-
- UpdateRxPktTimeStamp8190(dev, stats);
-
- //
- // Rx A-MPDU
- //
- if(driver_info->FirstAGGR==1 || driver_info->PartAggr == 1)
- RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n",
- driver_info->FirstAGGR, driver_info->PartAggr);
-
- }
-
- skb_pull(skb,sizeof(rx_desc_819x_usb));
- //
- // Get Total offset of MPDU Frame Body
- //
- if((stats->RxBufShift + stats->RxDrvInfoSize) > 0) {
- stats->bShift = 1;
- skb_pull(skb,stats->RxBufShift + stats->RxDrvInfoSize);
- }
-
- /* for debug 2008.5.29 */
-#if 0
- {
- int i;
- printk("\n>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
- for(i = 0; i < skb->len; i++) {
- if(i % 10 == 0) printk("\n");
- printk("%02x ", skb->data[i]);
- }
- printk("\n<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n");
- }
-#endif
-
- //added by vivi, for MP, 20080108
- stats->RxIs40MHzPacket = driver_info->BW;
- if(stats->RxDrvInfoSize != 0)
- TranslateRxSignalStuff819xUsb(skb, stats, driver_info);
-
-}
-#endif
-#ifdef RTL8192SU
#if 0
/*-----------------------------------------------------------------------------
* Function: UpdateRxAMPDUHistogramStatistics8192S
@@ -10196,10 +8593,8 @@ UpdateRxAMPDUHistogramStatistics8192S(
} // UpdateRxAMPDUHistogramStatistics8192S
#endif
-#endif
-#ifdef RTL8192SU
//
// Description:
// The strarting address of wireless lan header will shift 1 or 2 or 3 or "more" bytes for the following reason :
@@ -10285,67 +8680,6 @@ void rtl8192SU_rx_nomal(struct sk_buff*
}
}
-#else
-u32 GetRxPacketShiftBytes819xUsb(struct ieee80211_rx_stats *Status, bool bIsRxAggrSubframe)
-{
- return (sizeof(rx_desc_819x_usb) + Status->RxDrvInfoSize
- + Status->RxBufShift);
-}
-
-void rtl8192_rx_nomal(struct sk_buff* skb)
-{
- rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
- struct net_device *dev=info->dev;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- struct ieee80211_rx_stats stats = {
- .signal = 0,
- .noise = -98,
- .rate = 0,
- // .mac_time = jiffies,
- .freq = IEEE80211_24GHZ_BAND,
- };
- u32 rx_pkt_len = 0;
- struct ieee80211_hdr_1addr *ieee80211_hdr = NULL;
- bool unicast_packet = false;
-
- /* 20 is for ps-poll */
- if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
- /* first packet should not contain Rx aggregation header */
- query_rxdesc_status(skb, &stats, false);
- /* TODO */
- /* hardware related info */
- /* Process the MPDU recevied */
- skb_trim(skb, skb->len - 4/*sCrcLng*/);
-
- rx_pkt_len = skb->len;
- ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data;
- unicast_packet = false;
- if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
- //TODO
- }else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){
- //TODO
- }else {
- /* unicast packet */
- unicast_packet = true;
- }
-
- if(!ieee80211_rx(priv->ieee80211,skb, &stats)) {
- dev_kfree_skb_any(skb);
- } else {
- priv->stats.rxoktotal++;
- if(unicast_packet) {
- priv->stats.rxbytesunicast += rx_pkt_len;
- }
- }
- } else {
- priv->stats.rxurberr++;
- printk("actual_length:%d\n", skb->len);
- dev_kfree_skb_any(skb);
- }
-
-}
-
-#endif
void
rtl819xusb_process_received_packet(
@@ -10424,7 +8758,6 @@ void query_rx_cmdpkt_desc_status(struct
stats->ntotalfrag = 1;
}
-#ifdef RTL8192SU
void rtl8192SU_rx_cmd(struct sk_buff *skb)
{
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
@@ -10495,70 +8828,6 @@ void rtl8192SU_rx_cmd(struct sk_buff *sk
RT_TRACE(COMP_RECV, "<--- HalUsbInCommandComplete8192SUsb()\n");
}
-#else
-void rtl8192_rx_cmd(struct sk_buff *skb)
-{
- struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
- struct net_device *dev = info->dev;
- //int ret;
-// struct urb *rx_urb = info->urb;
- /* TODO */
- struct ieee80211_rx_stats stats = {
- .signal = 0,
- .noise = -98,
- .rate = 0,
- // .mac_time = jiffies,
- .freq = IEEE80211_24GHZ_BAND,
- };
-
- if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE))
- {
-
- query_rx_cmdpkt_desc_status(skb,&stats);
- // this is to be done by amy 080508 prfd->queue_id = 1;
-
-
- //
- // Process the command packet received.
- //
-
- rtl819xusb_process_received_packet(dev,&stats);
-
- dev_kfree_skb_any(skb);
- }
- else
- ;
-
-
-#if 0
- desc = (u32*)(skb->data);
- cmd = (desc[0] >> 30) & 0x03;
-
- if(cmd == 0x00) {//beacon interrupt
- //send beacon packet
- skb = ieee80211_get_beacon(priv->ieee80211);
-
- if(!skb){
- DMESG("not enought memory for allocating beacon");
- return;
- }
- skb->cb[0] = BEACON_PRIORITY;
- skb->cb[1] = 0;
- skb->cb[2] = ieeerate2rtlrate(priv->ieee80211->basic_rate);
- ret = rtl8192_tx(dev, skb);
-
- if( ret != 0 ){
- printk(KERN_ALERT "tx beacon packet error : %d !\n", ret);
- }
- dev_kfree_skb_any(skb);
- } else {//0x00
- //{ log the device information
- // At present, It is not implemented just now.
- //}
- }
-#endif
-}
-#endif
void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
{
@@ -10699,17 +8968,10 @@ static int __devinit rtl8192_usb_probe(s
priv->ieee80211 = netdev_priv(dev);
priv->udev=udev;
-#ifdef RTL8192SU
HalUsbSetQueuePipeMapping8192SUsb(intf, dev);
-#endif
-#ifdef RTL8192SU
//printk("===============>NIC 8192SU\n");
priv->ops = &rtl8192su_ops;
-#else
- //printk("===============>NIC 8192U\n");
- priv->ops = &rtl8192u_ops;
-#endif
dev->netdev_ops = &rtl8192_netdev_ops;
Index: b/drivers/staging/rtl8192su/r8192U_dm.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192U_dm.c
+++ b/drivers/staging/rtl8192su/r8192U_dm.c
@@ -15,7 +15,6 @@ Major Change History:
--*/
-#ifdef RTL8192SU
#include "r8192U.h"
#include "r8192U_dm.h"
//#include "r8190_rtl8256.h"
@@ -23,15 +22,6 @@ Major Change History:
#include "r8192S_hw.h"
#include "r8192S_phy.h"
#include "r8192S_phyreg.h"
-#else
-#include "r8192U.h"
-#include "r8192U_dm.h"
-#include "r8192U_hw.h"
-#include "r819xU_phy.h"
-#include "r819xU_phyreg.h"
-#include "r8190_rtl8256.h"
-#include "r819xU_cmdpkt.h"
-#endif
/*---------------------------Define Local Constant---------------------------*/
//
@@ -50,7 +40,6 @@ typedef enum _HT_IOT_PEER
}HT_IOT_PEER_E, *PHTIOT_PEER_E;
#endif
#if 1
-#ifdef RTL8192SU
static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
// UNKNOWN REALTEK_90 /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP
{ 0xa44f, 0x5ea44f, 0x5ea44f, 0xa44f, 0xa44f, 0xa44f, 0xa630, 0xa42b, 0x5e4322, 0x5e4322};
@@ -58,14 +47,6 @@ typedef enum _HT_IOT_PEER
// UNKNOWN REALTEK /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP
{ 0x5ea44f, 0xa44f, 0x5ea44f, 0x5e4322, 0x5ea422, 0x5e4322, 0x3ea44f, 0x5ea42b, 0x5e4322, 0x5e4322};
-#else
-
-static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
- { 0x5e4322, 0x5e4322, 0x5ea44f, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f};
-static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
- { 0x5e4322, 0xa44f, 0x5ea44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f};
-
-#endif
#endif
#define RTK_UL_EDCA 0xa44f
@@ -202,7 +183,6 @@ static void dm_ctstoself(struct net_devi
//================================================================================
// HW Dynamic mechanism interface.
//================================================================================
-#ifdef RTL8192SU
static void dm_CheckAggrPolicy(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -273,7 +253,6 @@ static void dm_CheckAggrPolicy(struct ne
lastTxOkCnt = priv->stats.txbytesunicast;
lastRxOkCnt = priv->stats.rxbytesunicast;
}
-#endif
//
// Description:
// Prepare SW resource for HW dynamic mechanism.
@@ -293,11 +272,7 @@ init_hal_dm(struct net_device *dev)
//Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code.
dm_init_dynamic_txpower(dev);
init_rate_adaptive(dev);
-#ifdef RTL8192SU
dm_initialize_txpower_tracking(dev);
-#else
- //dm_initialize_txpower_tracking(dev);
-#endif
dm_dig_init(dev);
dm_init_edca_turbo(dev);
dm_init_bandwidth_autoswitch(dev);
@@ -317,7 +292,6 @@ extern void deinit_hal_dm(struct net_dev
-#ifdef RTL8192SU
//#if 0
extern void hal_dm_watchdog(struct net_device *dev)
{
@@ -372,31 +346,6 @@ extern void hal_dm_watchdog(struct n
dm_ctstoself(dev);
} //HalDmWatchDog
-#else
-extern void hal_dm_watchdog(struct net_device *dev)
-{
- //struct r8192_priv *priv = ieee80211_priv(dev);
-
- //static u8 previous_bssid[6] ={0};
-
- /*Add by amy 2008/05/15 ,porting from windows code.*/
- dm_check_rate_adaptive(dev);
- dm_dynamic_txpower(dev);
- dm_check_txrateandretrycount(dev);
- dm_check_txpower_tracking(dev);
- dm_ctrl_initgain_byrssi(dev);
- dm_check_edca_turbo(dev);
- dm_bandwidth_autoswitch(dev);
- dm_check_rfctrl_gpio(dev);
- dm_check_rx_path_selection(dev);
- dm_check_fsync(dev);
-
- // Add by amy 2008-05-15 porting from windows code.
- dm_check_pbc_gpio(dev);
- dm_send_rssi_tofw(dev);
- dm_ctstoself(dev);
-} //HalDmWatchDog
-#endif
/*
* Decide Rate Adaptive Set according to distance (signal strength)
@@ -1595,37 +1544,15 @@ static void dm_InitializeTXPowerTracking
}
-#ifndef RTL8192SU
-static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
- // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
- // 3-wire by driver cause RF goes into wrong state.
- if(priv->ieee80211->FwRWRF)
- priv->btxpower_tracking = TRUE;
- else
- priv->btxpower_tracking = FALSE;
- priv->txpower_count = 0;
- priv->btxpower_trackingInit = FALSE;
-}
-#endif
void dm_initialize_txpower_tracking(struct net_device *dev)
{
#if (defined RTL8190P)
dm_InitializeTXPowerTracking_TSSI(dev);
-#elif (defined RTL8192SU)
+#else
// 2009/01/12 MH Enable for 92S series channel 1-14 CCK tx pwer setting for MP.
//
dm_InitializeTXPowerTracking_TSSI(dev);
-#else
- struct r8192_priv *priv = ieee80211_priv(dev);
- if(priv->bDcut == TRUE)
- dm_InitializeTXPowerTracking_TSSI(dev);
- else
- dm_InitializeTXPowerTracking_ThermalMeter(dev);
#endif
}// dm_InitializeTXPowerTracking
@@ -1683,17 +1610,10 @@ static void dm_CheckTXPowerTracking_Ther
//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
//actually write reg0x02 bit1=0, then bit1=1.
//DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
-#ifdef RTL8192SU
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4d);
rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bRFRegOffsetMask, 0x4f);
-#else
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
-#endif
TM_Trigger = 1;
return;
}
@@ -2021,14 +1941,12 @@ extern void dm_change_dynamic_initgain_t
u32 dm_type,
u32 dm_value)
{
-#ifdef RTL8192SU
struct r8192_priv *priv = ieee80211_priv(dev);
if(dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH)
priv->MidHighPwrTHR_L2 = (u8)dm_value;
else if(dm_type == DIG_TYPE_THRESH_HIGHPWR_LOW)
priv->MidHighPwrTHR_L1 = (u8)dm_value;
return;
-#endif
if (dm_type == DIG_TYPE_THRESH_HIGH)
{
dm_digtable.rssi_high_thresh = dm_value;
@@ -2400,15 +2318,7 @@ static void dm_ctrl_initgain_byrssi_by_f
{
/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-#ifdef RTL8192SU
rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00);
-#else
- #ifdef RTL8190P
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
- #else
- write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
- #endif
-#endif
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
*/
@@ -2552,15 +2462,7 @@ static void dm_ctrl_initgain_byrssi_high
// 3.1 Higher PD_TH for OFDM for high power state.
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
{
-#ifdef RTL8192SU
rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x10);
-#else
- #ifdef RTL8190P
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
- #else
- write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
- #endif
-#endif
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
*/
@@ -2727,15 +2629,7 @@ static void dm_pd_th(
{
/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-#ifdef RTL8192SU
rtl8192_setBBreg(dev, (rOFDM0_XATxAFE+3), bMaskByte0, 0x00);
-#else
- #ifdef RTL8190P
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
- #else
- write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
- #endif
-#endif
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
*/
@@ -2899,7 +2793,6 @@ static void dm_check_edca_turbo(
{
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
-#ifdef RTL8192SU
// Modify EDCA parameters selection bias
// For some APs, use downlink EDCA parameters for uplink+downlink
if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_EDCA_BIAS_ON_RX)
@@ -2942,31 +2835,6 @@ static void dm_check_edca_turbo(
}
priv->bcurrent_turbo_EDCA = true;
}
-#else
- // For RT-AP, we needs to turn it on when Rx>Tx
- if(curRxOkCnt > 4*curTxOkCnt)
- {
- //printk("%s():curRxOkCnt > 4*curTxOkCnt\n");
- if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
- {
- write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
- priv->bis_cur_rdlstate = true;
- }
- }
- else
- {
-
- //printk("%s():curRxOkCnt < 4*curTxOkCnt\n");
- if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
- {
- write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
- priv->bis_cur_rdlstate = false;
- }
-
- }
-
- priv->bcurrent_turbo_EDCA = true;
-#endif
}
else
{
@@ -3212,9 +3080,7 @@ static void dm_check_rfctrl_gpio(struct
#ifdef RTL8192U
return;
#endif
-#ifdef RTL8192SU
return;
-#endif
#ifdef RTL8192E
queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0);
#endif
@@ -3257,7 +3123,6 @@ static void dm_check_pbc_gpio(struct net
priv->bpbc_pressed = true;
}
#endif
-#ifdef RTL8192SU
struct r8192_priv *priv = ieee80211_priv(dev);
u8 tmp1byte;
@@ -3283,7 +3148,6 @@ static void dm_check_pbc_gpio(struct net
priv->bpbc_pressed = true;
}
-#endif
}
@@ -3862,15 +3726,7 @@ extern void dm_fsync_timer_callback(unsi
write_nic_byte(dev, 0xC3e, 0x96);
}
priv->ContiuneDiffCount = 0;
-#ifdef RTL8192SU
rtl8192_setBBreg(dev, rOFDM0_RxDetector2, bMaskDWord, 0x164052cd);
-#else
- #ifdef RTL8190P
- write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd);
- #else
- write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
- #endif
-#endif
}
RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
@@ -4283,16 +4139,6 @@ static void dm_dynamic_txpower(struct ne
(priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low ) )
{
RT_TRACE(COMP_TXAGC,"SetTxPowerLevel8190() channel = %d \n" , priv->ieee80211->current_network.channel);
-#ifndef RTL8192SU
-#if defined(RTL8190P) || defined(RTL8192E)
- SetTxPowerLevel8190(Adapter,pHalData->CurrentChannel);
-#endif
-
-#ifdef RTL8192U
- rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
- //pHalData->bStartTxCtrlByTPCNFR = FALSE; //Clear th flag of Set TX Power from Sitesurvey
-#endif
-#endif
}
priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
@@ -4306,11 +4152,7 @@ static void dm_check_txrateandretrycount
struct ieee80211_device* ieee = priv->ieee80211;
//for 11n tx rate
// priv->stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);
-#ifdef RTL8192SU
ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, TX_RATE_REG);
-#else
- ieee->softmac_stats.CurrentShowTxate = read_nic_byte(dev, Current_Tx_Rate_Reg);
-#endif
//printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate);
//for initial tx rate
// priv->stats.last_packet_rate = read_nic_byte(dev, Initial_Tx_Rate_Reg);
@@ -4322,24 +4164,6 @@ static void dm_check_txrateandretrycount
static void dm_send_rssi_tofw(struct net_device *dev)
{
-#ifndef RTL8192SU
- DCMD_TXCMD_T tx_cmd;
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- // If we test chariot, we should stop the TX command ?
- // Because 92E will always silent reset when we send tx command. We use register
- // 0x1e0(byte) to botify driver.
- write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
- return;
-#if 1
- tx_cmd.Op = TXCMD_SET_RX_RSSI;
- tx_cmd.Length = 4;
- tx_cmd.Value = priv->undecorated_smoothed_pwdb;
-
- cmpk_message_handle_tx(dev, (u8*)&tx_cmd,
- DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
-#endif
-#endif
}
#ifdef TO_DO_LIST
Index: b/drivers/staging/rtl8192su/r8192U_wx.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192U_wx.c
+++ b/drivers/staging/rtl8192su/r8192U_wx.c
@@ -17,15 +17,9 @@
project Authors.
*/
-#ifdef RTL8192SU
#include <linux/string.h>
#include "r8192U.h"
#include "r8192S_hw.h"
-#else
-#include <linux/string.h>
-#include "r8192U.h"
-#include "r8192U_hw.h"
-#endif
#include "ieee80211/dot11d.h"
@@ -344,7 +338,6 @@ static int r8192_wx_force_reset(struct n
}
-#ifdef RTL8192SU
static int r8191su_wx_get_firm_version(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *wrqu, char *extra)
@@ -360,7 +353,6 @@ static int r8191su_wx_get_firm_version(s
up(&priv->wx_sem);
return 0;
}
-#endif
@@ -1232,14 +1224,12 @@ static const struct iw_priv_args r8192_p
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "forcereset"
}
-#ifdef RTL8192SU
,
{
SIOCIWFIRSTPRIV + 0x5,
IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT|IW_PRIV_SIZE_FIXED|1,
"firm_ver"
}
-#endif
};
@@ -1262,9 +1252,7 @@ static iw_handler r8192_private_handler[
#endif
r8192_wx_force_reset,
(iw_handler)NULL,
-#ifdef RTL8192SU
(iw_handler)r8191su_wx_get_firm_version,
-#endif
};
struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
Index: b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
===================================================================
--- a/drivers/staging/rtl8192su/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
@@ -108,84 +108,7 @@ SendTxCommandPacket(
{
bool rt_status = true;
-#ifdef RTL8192SU
return rt_status;
-#else
-#ifdef RTL8192U
- return rt_status;
-#else
- struct r8192_priv *priv = ieee80211_priv(dev);
- u16 frag_threshold;
- u16 frag_length, frag_offset = 0;
- //u16 total_size;
- //int i;
-
- rt_firmware *pfirmware = priv->pFirmware;
- struct sk_buff *skb;
- unsigned char *seg_ptr;
- cb_desc *tcb_desc;
- u8 bLastIniPkt;
-
- firmware_init_param(dev);
- //Fragmentation might be required
- frag_threshold = pfirmware->cmdpacket_frag_thresold;
- do {
- if((buffer_len - frag_offset) > frag_threshold) {
- frag_length = frag_threshold ;
- bLastIniPkt = 0;
-
- } else {
- frag_length = buffer_len - frag_offset;
- bLastIniPkt = 1;
-
- }
-
- /* Allocate skb buffer to contain firmware info and tx descriptor info
- * add 4 to avoid packet appending overflow.
- * */
- #ifdef RTL8192U
- skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
- #else
- skb = dev_alloc_skb(frag_length + 4);
- #endif
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
- tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
- tcb_desc->queue_index = TXCMD_QUEUE;
- tcb_desc->bCmdOrInit = packettype;
- tcb_desc->bLastIniPkt = bLastIniPkt;
-
- #ifdef RTL8192U
- skb_reserve(skb, USB_HWDESC_HEADER_LEN);
- #endif
-
- seg_ptr = skb_put(skb, buffer_len);
- /*
- * Transform from little endian to big endian
- * and pending zero
- */
- memcpy(seg_ptr,codevirtualaddress,buffer_len);
- tcb_desc->txbuf_size= (u16)buffer_len;
-
-
- if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
- (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
- (priv->ieee80211->queue_stop) ) {
- RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
- skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
- } else {
- priv->ieee80211->softmac_hard_start_xmit(skb,dev);
- }
-
- codevirtualaddress += frag_length;
- frag_offset += frag_length;
-
- }while(frag_offset < buffer_len);
-
- return rt_status;
-
-
-#endif
-#endif
} /* CMPK_Message_Handle_Tx */
/*-----------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/