RE: [patch 1/4] cpufreq: Eliminate the recent lockdep warnings incpufreq
From: Pallipadi, Venkatesh
Date: Fri Jul 03 2009 - 10:26:24 EST
>-----Original Message-----
>From: Thomas Renninger [mailto:trenn@xxxxxxx]
>Sent: Friday, July 03, 2009 4:41 AM
>To: Pallipadi, Venkatesh
>Cc: Dave Jones; linux-kernel@xxxxxxxxxxxxxxx;
>cpufreq@xxxxxxxxxxxxxxx; kernel-testers@xxxxxxxxxxxxxxx; Ingo
>Molnar; Rafael J. Wysocki; Dave Young; Pekka Enberg; Mathieu Desnoyers
>Subject: Re: [patch 1/4] cpufreq: Eliminate the recent lockdep
>warnings in cpufreq
>
>On Friday 03 July 2009 02:08:30 venkatesh.pallipadi@xxxxxxxxx wrote:
>> Commit b14893a62c73af0eca414cfed505b8c09efc613c although it was very
>> much needed to properly cleanup ondemand timer, opened-up a
>can of worms
>> related to locking dependencies in cpufreq.
>>
>> Patch here defines the need for dbs_mutex and cleans up its usage in
>> ondemand governor. This also resolves the lockdep warnings
>reported here
>I think I get these changes and now dbs_mutex is needed...
>Making sure governor() is always called with rwsem held (hope
>that is the
>case now) is a good idea. Unfortunately it requires the dbs_mutex in
>do_dbs_timer and it will be hard to ever remove it.
Yes. Rwsem held for any policy changes from cpufreq core makes this fix
clean. I did not like the earlier state where rwsem was helt for START
and not for STOP calls etc.
Patch 3 and 4 removes dbs_mutex from do_dbs_timer.
>I still do not see the need of "dbs_mutex protects data in
>dbs_tuners_ins
>from concurrent changes", though. If someone enlightens me, that would
>be appreciated.
OK. Consider these two happening in parallel.
echo 0 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/ignore_nice
echo 1 > /sys/devices/system/cpu/cpu4/cpufreq/ondemand/ignore_nice
As they are coming from different cpu, rwsem wont protect us and
without the dbs_mutex, end state after this can will be unpredictable.
prev_cpu_idle and prev_cpu_nice can end up with wrong values where
only one of them is set etc. That will affect the ondemand algorithm.
Thanks,
Venki
>> http://lkml.indiana.edu/hypermail/linux/kernel/0906.1/01925.html
>> http://lkml.indiana.edu/hypermail/linux/kernel/0907.0/00820.html
>>
>> and few others..
>>
>> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@xxxxxxxxx>
>> ---
>> drivers/cpufreq/cpufreq.c | 4 ++--
>> drivers/cpufreq/cpufreq_conservative.c | 27
>+++++++++++----------------
>> drivers/cpufreq/cpufreq_ondemand.c | 27
>+++++++++++----------------
>> 3 files changed, 24 insertions(+), 34 deletions(-)
>>
>> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
>> index 6e2ec0b..c7fe16e 100644
>> --- a/drivers/cpufreq/cpufreq.c
>> +++ b/drivers/cpufreq/cpufreq.c
>> @@ -1070,8 +1070,6 @@ static int __cpufreq_remove_dev(struct
>sys_device
>*sys_dev)
>> spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
>> #endif
>>
>> - unlock_policy_rwsem_write(cpu);
>> -
>> if (cpufreq_driver->target)
>> __cpufreq_governor(data, CPUFREQ_GOV_STOP);
>>
>> @@ -1088,6 +1086,8 @@ static int __cpufreq_remove_dev(struct
>sys_device
>*sys_dev)
>> if (cpufreq_driver->exit)
>> cpufreq_driver->exit(data);
>>
>> + unlock_policy_rwsem_write(cpu);
>> +
>> free_cpumask_var(data->related_cpus);
>> free_cpumask_var(data->cpus);
>> kfree(data);
>> diff --git a/drivers/cpufreq/cpufreq_conservative.c
>b/drivers/cpufreq/cpufreq_conservative.c
>> index 7fc58af..58889f2 100644
>> --- a/drivers/cpufreq/cpufreq_conservative.c
>> +++ b/drivers/cpufreq/cpufreq_conservative.c
>> @@ -70,15 +70,10 @@ static DEFINE_PER_CPU(struct cpu_dbs_info_s,
>cpu_dbs_info);
>> static unsigned int dbs_enable; /* number of CPUs using
>this policy */
>>
>> /*
>> - * DEADLOCK ALERT! There is a ordering requirement between
>cpu_hotplug
>> - * lock and dbs_mutex. cpu_hotplug lock should always be held before
>> - * dbs_mutex. If any function that can potentially take
>cpu_hotplug lock
>> - * (like __cpufreq_driver_target()) is being called with
>dbs_mutex taken,
>then
>> - * cpu_hotplug lock should be taken before that. Note that
>cpu_hotplug lock
>> - * is recursive for the same process. -Venki
>> - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the
>dbs_mutex,
>because it
>> - * would deadlock with cancel_delayed_work_sync(), which is
>needed for
>proper
>> - * raceless workqueue teardown.
>> + * dbs_mutex protects data in dbs_tuners_ins from
>concurrent changes on
>> + * different CPUs. It protects dbs_enable in governor
>start/stop. It also
>> + * serializes governor limit_change with do_dbs_timer. We
>do not want
>> + * do_dbs_timer to run when user is changing the governor or limits.
>> */
>> static DEFINE_MUTEX(dbs_mutex);
>>
>> @@ -488,18 +483,17 @@ static void do_dbs_timer(struct
>work_struct *work)
>>
>> delay -= jiffies % delay;
>>
>> - if (lock_policy_rwsem_write(cpu) < 0)
>> - return;
>> + mutex_lock(&dbs_mutex);
>>
>> if (!dbs_info->enable) {
>> - unlock_policy_rwsem_write(cpu);
>> + mutex_unlock(&dbs_mutex);
>> return;
>> }
>>
>> dbs_check_cpu(dbs_info);
>>
>> queue_delayed_work_on(cpu, kconservative_wq,
>&dbs_info->work, delay);
>> - unlock_policy_rwsem_write(cpu);
>> + mutex_unlock(&dbs_mutex);
>> }
>>
>> static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
>> @@ -590,15 +584,16 @@ static int cpufreq_governor_dbs(struct
>cpufreq_policy
>*policy,
>> &dbs_cpufreq_notifier_block,
>> CPUFREQ_TRANSITION_NOTIFIER);
>> }
>> - dbs_timer_init(this_dbs_info);
>> -
>> mutex_unlock(&dbs_mutex);
>>
>> + dbs_timer_init(this_dbs_info);
>> +
>> break;
>>
>> case CPUFREQ_GOV_STOP:
>> - mutex_lock(&dbs_mutex);
>> dbs_timer_exit(this_dbs_info);
>> +
>> + mutex_lock(&dbs_mutex);
>> sysfs_remove_group(&policy->kobj, &dbs_attr_group);
>> dbs_enable--;
>>
>> diff --git a/drivers/cpufreq/cpufreq_ondemand.c
>b/drivers/cpufreq/cpufreq_ondemand.c
>> index 1911d17..246ae14 100644
>> --- a/drivers/cpufreq/cpufreq_ondemand.c
>> +++ b/drivers/cpufreq/cpufreq_ondemand.c
>> @@ -78,15 +78,10 @@ static DEFINE_PER_CPU(struct cpu_dbs_info_s,
>cpu_dbs_info);
>> static unsigned int dbs_enable; /* number of CPUs using
>this policy */
>>
>> /*
>> - * DEADLOCK ALERT! There is a ordering requirement between
>cpu_hotplug
>> - * lock and dbs_mutex. cpu_hotplug lock should always be held before
>> - * dbs_mutex. If any function that can potentially take
>cpu_hotplug lock
>> - * (like __cpufreq_driver_target()) is being called with
>dbs_mutex taken,
>then
>> - * cpu_hotplug lock should be taken before that. Note that
>cpu_hotplug lock
>> - * is recursive for the same process. -Venki
>> - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the
>dbs_mutex,
>because it
>> - * would deadlock with cancel_delayed_work_sync(), which is
>needed for
>proper
>> - * raceless workqueue teardown.
>> + * dbs_mutex protects data in dbs_tuners_ins from
>concurrent changes on
>> + * different CPUs. It protects dbs_enable in governor
>start/stop. It also
>> + * serializes governor limit_change with do_dbs_timer. We
>do not want
>> + * do_dbs_timer to run when user is changing the governor or limits.
>> */
>> static DEFINE_MUTEX(dbs_mutex);
>>
>> @@ -494,11 +489,10 @@ static void do_dbs_timer(struct
>work_struct *work)
>>
>> delay -= jiffies % delay;
>>
>> - if (lock_policy_rwsem_write(cpu) < 0)
>> - return;
>> + mutex_lock(&dbs_mutex);
>>
>> if (!dbs_info->enable) {
>> - unlock_policy_rwsem_write(cpu);
>> + mutex_unlock(&dbs_mutex);
>> return;
>> }
>>
>> @@ -517,7 +511,7 @@ static void do_dbs_timer(struct
>work_struct *work)
>> dbs_info->freq_lo, CPUFREQ_RELATION_H);
>> }
>> queue_delayed_work_on(cpu, kondemand_wq,
>&dbs_info->work, delay);
>> - unlock_policy_rwsem_write(cpu);
>> + mutex_unlock(&dbs_mutex);
>> }
>>
>> static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
>> @@ -598,14 +592,15 @@ static int cpufreq_governor_dbs(struct
>cpufreq_policy
>*policy,
>> max(min_sampling_rate,
>> latency * LATENCY_MULTIPLIER);
>> }
>> - dbs_timer_init(this_dbs_info);
>> -
>> mutex_unlock(&dbs_mutex);
>> +
>> + dbs_timer_init(this_dbs_info);
>> break;
>>
>> case CPUFREQ_GOV_STOP:
>> - mutex_lock(&dbs_mutex);
>> dbs_timer_exit(this_dbs_info);
>> +
>> + mutex_lock(&dbs_mutex);
>> sysfs_remove_group(&policy->kobj, &dbs_attr_group);
>> dbs_enable--;
>> mutex_unlock(&dbs_mutex);
>> --
>> 1.6.0.6
>>
>> --
>>
>>
>
>
>--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/