[PATCH] Trivial: Fix typo "for for" in multiple files

From: Gadiyar, Anand
Date: Mon Jul 06 2009 - 08:55:42 EST

Next message: Artem Bityutskiy: "Re: [PATCH 02/10] writeback: switch to per-bdi threads for flushingdata"
Previous message: Michal Simek: "Re: mmap syscall problem"
Next in thread: Jiri Kosina: "Re: [PATCH] Trivial: Fix typo "for for" in multiple files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Anand Gadiyar <gadiyar@xxxxxx>

Trivial: Fix typo "for for" in multiple files.

Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx>
---
After submitting a patch [1] for two instances of this in EHCI code,
I decided to grep the rest of the kernel as well and came up with this.

Let me know if you want me to re-submit with both patches folded
together.

[1] <http://patchwork.kernel.org/patch/34236/>

Documentation/filesystems/nfsroot.txt | 2 +-
Documentation/powerpc/booting-without-of.txt | 2 +-
arch/blackfin/mach-bf538/include/mach/defBF539.h | 2 +-
arch/mips/include/asm/ioctl.h | 2 +-
arch/powerpc/kernel/udbg_16550.c | 2 +-
arch/powerpc/platforms/powermac/udbg_scc.c | 2 +-
drivers/edac/edac_core.h | 2 +-
drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 +-
drivers/isdn/i4l/isdn_common.c | 4 ++--
drivers/media/Kconfig | 2 +-
drivers/net/bnx2x_reg.h | 2 +-
fs/xfs/xfs_fs.h | 2 +-
include/linux/raid/md_k.h | 2 +-
include/linux/usb.h | 2 +-
14 files changed, 15 insertions(+), 15 deletions(-)

Index: linux-omap-2.6/Documentation/filesystems/nfsroot.txt
===================================================================
--- linux-omap-2.6.orig/Documentation/filesystems/nfsroot.txt
+++ linux-omap-2.6/Documentation/filesystems/nfsroot.txt
@@ -105,7 +105,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netm
the client address and this parameter is NOT empty only
replies from the specified server are accepted.

- Only required for for NFS root. That is autoconfiguration
+ Only required for NFS root. That is autoconfiguration
will not be triggered if it is missing and NFS root is not
in operation.

Index: linux-omap-2.6/Documentation/powerpc/booting-without-of.txt
===================================================================
--- linux-omap-2.6.orig/Documentation/powerpc/booting-without-of.txt
+++ linux-omap-2.6/Documentation/powerpc/booting-without-of.txt
@@ -1931,7 +1931,7 @@ prefixed with the string "marvell,", for
devices. This field represents the number of cells needed to
represent the address of the memory-mapped registers of devices
within the system controller chip.
- - #size-cells : Size representation for for the memory-mapped
+ - #size-cells : Size representation for the memory-mapped
registers within the system controller chip.
- #interrupt-cells : Defines the width of cells used to represent
interrupts.
Index: linux-omap-2.6/arch/blackfin/mach-bf538/include/mach/defBF539.h
===================================================================
--- linux-omap-2.6.orig/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ linux-omap-2.6/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2269,7 +2269,7 @@
#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */
#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */
#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
-#define CDPRIO 0x0100 /* DMA has priority over core for for external accesses */
+#define CDPRIO 0x0100 /* DMA has priority over core for external accesses */

/* EBIU_AMGCTL Bit Positions */
#define AMCKEN_P 0x0000 /* Enable CLKOUT */
Index: linux-omap-2.6/arch/mips/include/asm/ioctl.h
===================================================================
--- linux-omap-2.6.orig/arch/mips/include/asm/ioctl.h
+++ linux-omap-2.6/arch/mips/include/asm/ioctl.h
@@ -18,7 +18,7 @@
* the process. I'd like to clean it up for the i386 as well, but
* it's so painful recognizing both the new and the old numbers..
*
- * The same applies for for the MIPS ABI; in fact even the macros
+ * The same applies for the MIPS ABI; in fact even the macros
* from Linux/Alpha fit almost perfectly.
*/

Index: linux-omap-2.6/arch/powerpc/kernel/udbg_16550.c
===================================================================
--- linux-omap-2.6.orig/arch/powerpc/kernel/udbg_16550.c
+++ linux-omap-2.6/arch/powerpc/kernel/udbg_16550.c
@@ -1,5 +1,5 @@
/*
- * udbg for for NS16550 compatable serial ports
+ * udbg for NS16550 compatable serial ports
*
* Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
*
Index: linux-omap-2.6/arch/powerpc/platforms/powermac/udbg_scc.c
===================================================================
--- linux-omap-2.6.orig/arch/powerpc/platforms/powermac/udbg_scc.c
+++ linux-omap-2.6/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -1,5 +1,5 @@
/*
- * udbg for for zilog scc ports as found on Apple PowerMacs
+ * udbg for zilog scc ports as found on Apple PowerMacs
*
* Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
*
Index: linux-omap-2.6/drivers/edac/edac_core.h
===================================================================
--- linux-omap-2.6.orig/drivers/edac/edac_core.h
+++ linux-omap-2.6/drivers/edac/edac_core.h
@@ -268,7 +268,7 @@ enum scrub_type {
* is irrespective of the memory devices being mounted
* on both sides of the memory stick.
*
- * Socket set: All of the memory sticks that are required for for
+ * Socket set: All of the memory sticks that are required for
* a single memory access or all of the memory sticks
* spanned by a chip-select row. A single socket set
* has two chip-select rows and if double-sided sticks
Index: linux-omap-2.6/drivers/infiniband/hw/ipath/ipath_iba6110.c
===================================================================
--- linux-omap-2.6.orig/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ linux-omap-2.6/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -809,7 +809,7 @@ static int ipath_setup_ht_reset(struct i
* errors. We only bother to do this at load time, because it's OK if
* it happened before we were loaded (first time after boot/reset),
* but any time after that, it's fatal anyway. Also need to not check
- * for for upper byte errors if we are in 8 bit mode, so figure out
+ * for upper byte errors if we are in 8 bit mode, so figure out
* our width. For now, at least, also complain if it's 8 bit.
*/
static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
Index: linux-omap-2.6/drivers/isdn/i4l/isdn_common.c
===================================================================
--- linux-omap-2.6.orig/drivers/isdn/i4l/isdn_common.c
+++ linux-omap-2.6/drivers/isdn/i4l/isdn_common.c
@@ -761,7 +761,7 @@ isdn_getnum(char **p)
* Be aware that this is not an atomic operation when sleep != 0, even though
* interrupts are turned off! Well, like that we are currently only called
* on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
* takes care that this is not called for the same minor device number while
* we are sleeping, but access is not serialized against simultaneous read()
* from the corresponding ttyI device. Can other ugly events, like changes
@@ -873,7 +873,7 @@ isdn_readbchan(int di, int channel, u_ch
* Be aware that this is not an atomic operation when sleep != 0, even though
* interrupts are turned off! Well, like that we are currently only called
* on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
* takes care that this is not called for the same minor device number while
* we are sleeping, but access is not serialized against simultaneous read()
* from the corresponding ttyI device. Can other ugly events, like changes
Index: linux-omap-2.6/drivers/media/Kconfig
===================================================================
--- linux-omap-2.6.orig/drivers/media/Kconfig
+++ linux-omap-2.6/drivers/media/Kconfig
@@ -117,7 +117,7 @@ source "drivers/media/dvb/Kconfig"
config DAB
boolean "DAB adapters"
---help---
- Allow selecting support for for Digital Audio Broadcasting (DAB)
+ Allow selecting support for Digital Audio Broadcasting (DAB)
Receiver adapters.

if DAB
Index: linux-omap-2.6/drivers/net/bnx2x_reg.h
===================================================================
--- linux-omap-2.6.orig/drivers/net/bnx2x_reg.h
+++ linux-omap-2.6/drivers/net/bnx2x_reg.h
@@ -3653,7 +3653,7 @@
The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
header pointer. */
#define TCM_REG_XX_TABLE 0x50240
-/* [RW 4] Load value for for cfc ac credit cnt. */
+/* [RW 4] Load value for cfc ac credit cnt. */
#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
/* [RW 4] Load value for cfc cld credit cnt. */
#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
Index: linux-omap-2.6/fs/xfs/xfs_fs.h
===================================================================
--- linux-omap-2.6.orig/fs/xfs/xfs_fs.h
+++ linux-omap-2.6/fs/xfs/xfs_fs.h
@@ -117,7 +117,7 @@ struct getbmapx {
#define BMV_IF_VALID \
(BMV_IF_ATTRFORK|BMV_IF_NO_DMAPI_READ|BMV_IF_PREALLOC|BMV_IF_DELALLOC)

-/* bmv_oflags values - returned for for each non-header segment */
+/* bmv_oflags values - returned for each non-header segment */
#define BMV_OF_PREALLOC 0x1 /* segment = unwritten pre-allocation */
#define BMV_OF_DELALLOC 0x2 /* segment = delayed allocation */
#define BMV_OF_LAST 0x4 /* segment is the last in the file */
Index: linux-omap-2.6/include/linux/raid/md_k.h
===================================================================
--- linux-omap-2.6.orig/include/linux/raid/md_k.h
+++ linux-omap-2.6/include/linux/raid/md_k.h
@@ -201,7 +201,7 @@ struct mddev_s
* INTR: resync needs to be aborted for some reason
* DONE: thread is done and is waiting to be reaped
* REQUEST: user-space has requested a sync (used with SYNC)
- * CHECK: user-space request for for check-only, no repair
+ * CHECK: user-space request for check-only, no repair
* RESHAPE: A reshape is happening
*
* If neither SYNC or RESHAPE are set, then it is a recovery.
Index: linux-omap-2.6/include/linux/usb.h
===================================================================
--- linux-omap-2.6.orig/include/linux/usb.h
+++ linux-omap-2.6/include/linux/usb.h
@@ -1225,7 +1225,7 @@ typedef void (*usb_complete_t)(struct ur
* @start_frame: Returns the initial frame for isochronous transfers.
* @number_of_packets: Lists the number of ISO transfer buffers.
* @interval: Specifies the polling interval for interrupt or isochronous
- * transfers. The units are frames (milliseconds) for for full and low
+ * transfers. The units are frames (milliseconds) for full and low
* speed devices, and microframes (1/8 millisecond) for highspeed ones.
* @error_count: Returns the number of ISO transfers that reported errors.
* @context: For use in completion functions. This normally points to
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Artem Bityutskiy: "Re: [PATCH 02/10] writeback: switch to per-bdi threads for flushingdata"
Previous message: Michal Simek: "Re: mmap syscall problem"
Next in thread: Jiri Kosina: "Re: [PATCH] Trivial: Fix typo "for for" in multiple files"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]