Re: [RFC][patch 1/5] move clock source related code toclocksource.c

[john stultz]

On Wed, 2009-07-22 at 09:25 +0200, Martin Schwidefsky wrote:
> On Tue, 21 Jul 2009 15:00:07 -0700
> john stultz <johnstul@xxxxxxxxxx> wrote:
> 
> > On Tue, 2009-07-21 at 12:50 -0700, Daniel Walker wrote:
> > > On Tue, 2009-07-21 at 21:17 +0200, Martin Schwidefsky wrote:
> > > > plain text document attachment (clocksource-move.diff)
> > > > From: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
> > > > 
> > > > Move clock source related code from timekeeping.c to clocksource.c
> > > > where they belong. The selected clocks source "clock" is now defined
> > > > in clocksource.c and clocksource_init is added to set up the initial
> > > > clock.
> > > 
> > > The problem is most (if not all) the code your moving is actually time
> > > keeping code .. The reason it seems like clocksource code is cause John
> > > wasn't very choosy about which structure he added variables too .. So
> > > really this clean up needs to be in reverse, remove all the timekeeping
> > > code from the clocksource code.
> > 
> > Not so much that I wasn't very choosy, but that I had to pick my battles
> > there. At the time, Roman claimed keeping the timekeeping values in the
> > clocksource (instead of global to timekeeping.c) actually produced
> > better code.
> 
> There are only a couple of functions where the performance is
> important, these are the ktime_get functions (and variants) and probably
> the update_wall_time function.
> 
> > I do agree with Daniel's main point, that the patch mixes the layers I
> > tried to establish in the design.
> > 
> > Clocksource: Abstracts out a hardware counter.
> > NTP: Provides the reference time.
> > Timekeeping: Manages accumulating the clocksource, and combining input
> > from ntp's reference time to steer the hardware frequency.
> 
> Imho what makes the code hard to understand is that the internals of
> the clocksource have leaked into the timekeeping code. I'm getting at
> the cycle, mult and shift values here. The code would be much easier to
> understand if the clocksource would just return nanoseconds. The bad
> thing here is that we would loose some bits of precision.

While I completely agree the code is hard to understand, I really don't
think that pushing that down to clocksource.c will improve things. 

As much as you'd prefer it not, I feel the timekeeping code has to deal
with cycles. The consistent translation and accumulation of clocksource
cycles into nanoseconds is what timekeeping.c is all about.

We already have interfaces that return nanoseconds, they're
gensttimeofday, ktime_get, ktime_get_ts. 



> > Unfortunately, many timekeeping values got stuffed into the struct
> > clocksource. I've had plans to try to clean this up and utilize Patrick
> > Ohly's simpler clockcounter struct as a basis for a clocksource, nesting
> > the structures somewhat to look something like:
> > 
> > 
> > /* minimal structure only giving hardware info and access methods */
> > struct cyclecounter {
> > 	char *name;
> > 	cycle_t (*read)(const struct cyclecounter *cc);
> > 	cycle_t (*vread)(const struct cyclecounter *cc);
> > 	cycle_t mask;
> > 	u32 mult;
> > 	u32 shift;
> > };
> > 
> > /* more complicated structure holding timekeeping values */
> > struct timesource {
> > 	struct cyclecounter counter;
> > 	u32	corrected_mult;
> > 	cycle_t cycle_interval;
> > 	u64	xtime_interval;
> > 	u32	raw_interval;
> > 	cycle_t cycle_last;
> > 	u64	xtime_nsec;
> > 	s64	error; /* probably should be ntp_error */
> > 	...
> > }
> > 
> > However such a change would be quite a bit of churn to much of the
> > timekeeping code, and to only marginal benefit. So I've put it off.
> 
> That would be an improvement, but there are still these pesky cycles in
> the timesource.

Again, I think there has to be. Since some portion of the current time
is unaccumulated, it is inherently cycles based. The timekeeping core
has to decide when to accumulate those cycles into nanoseconds and store
them into xtime.  In order to do that, the timekeeping code has to have
an idea of where the cycle_last value is. Further, for improved
precision, and ntp steering, we use the *_interval values to accumulate
in chunks.


> > Martin, I've not been able to review your changes in extreme detail, but
> > I'm curious what the motivation for the drastic code rearrangement was?
> 
> It started of with a minor performance optimization, I wanted to get
> rid of the change_clocksource call every tick. When I looked at the
> code to understand it I started to move things around.
> 
> > I see you pushing a fair amount of code down a level, for instance,
> > except for the locking, getmonotonicraw() basically gets pushed down to
> > clocksource_read_raw().  The ktime_get/ktime_get_ts/getnstimeofday do
> > reduce some duplicate code, but that could still be minimized without
> > pushing stuff down to the clocksource level.
> 
> The background here is that I want to isolate the use ofthe cycles, mult
> and shift values to clocksource.[ch]

Again I do completely agree the code needs to be cleaned up.
Unfortunately there's still a split between the GENERIC_TIME and non
GENERIC_TIME arches that keeps us from making some cleanups right now.
I'm trying to get this all unified (see my arch_gettimeoffset patches),
but until we get all the arches moved over, there's some unfortunate
uglys we can't get rid of.


If I can find some cycles today, I'll try to take a rough swing at some
of the cleanup I mentioned earlier. Probably won't build, but will maybe
give you an idea of the direction I'm thinking about, and then you can
let me know where you feel its still too complex. Maybe then we can meet
in the middle?

thanks
-john


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/