On Fri, Aug 14, 2009 at 10:04:57PM +0200, Denys Vlasenko wrote:rsc@thebe:~$ microcom | ptx_ts "U-Boot 2.0.0-rc9"boot loader is not fast. considering its simple task, it can be made
[ 2.395740] < 2.395740>
[ 2.395860] < 0.000120>
[ 0.000011] < 0.000011> U-Boot 2.0.0-rc9 (Aug 5 2009 - 10:05:58)
[ 0.000059] < 0.000048>
[ 0.003823] < 0.003764> Board: Phytec phyCORE-i.MX27
[ 0.010753] < 0.006930> cfi_probe: cfi_flash base: 0xc0000000 size: 0x02000000
[ 0.018711] < 0.007958> NAND device: Manufacturer ID: 0x20, Chip ID: 0x36 (ST Micro NAND 64MiB 1,8V 8-bit)
[ 0.026592] < 0.007881> imxfb@imxfb0: i.MX Framebuffer driver
[ 0.178655] < 0.152063> dev_protect: currently broken
[ 0.178736] < 0.000081> Using environment in NOR Flash
[ 0.182577] < 0.003841> initialising PLLs
[ 0.367142] < 0.184565> Malloc space: 0xa3f00000 -> 0xa7f00000 (size 64 MB)
[ 0.370568] < 0.003426> Stack space : 0xa3ef8000 -> 0xa3f00000 (size 32 kB)
[ 0.445993] < 0.075425> running /env/bin/init...
[ 0.870592] < 0.424599>
[ 0.874559] < 0.003967> Hit any key to stop autoboot: 0
faster.
Yup, will check. Almost 1 s seems really long.